fix(thor-events): add parallel field for mic psi. Now shows mic in dbl and psi. (psi for charts)

micromate/models.py

@@ -159,12 +159,23 @@ class IdfReport:
 
 @dataclass
 class IdfPeaks:
-    """Geophone + mic peak values for one Thor event.  Native Thor units."""
+    """Geophone + mic peak values for one Thor event.  Native Thor units.
+
+    Thor stores the mic peak in two parallel forms — ``mic_pspl_dbl`` is
+    what the sidecar's top-level ``MicPSPL`` header field carries (dB(L)),
+    used in the report header.  ``mic_pspl_psi`` is the psi value derived
+    either from the IDFW sample table / IDFH interval column 9, or from
+    the binary mic counts (~2.14e-6 psi/count).  Needed because the
+    BW-shaped ``PeakValues.micl`` consumed by ``event_hdf5.write_event_hdf5``
+    expects psi — feeding it dB(L) makes the h5 mic-chart scale factor
+    blow up.
+    """
     transverse_ips:    Optional[float] = None    # in/s
     vertical_ips:      Optional[float] = None    # in/s
     longitudinal_ips:  Optional[float] = None    # in/s
     peak_vector_sum_ips: Optional[float] = None  # in/s
     mic_pspl_dbl:      Optional[float] = None    # dB(L)
+    mic_pspl_psi:      Optional[float] = None    # psi
 
 
 @dataclass
@@ -324,10 +335,14 @@ class IdfEvent:
         machinery without those code paths needing to know about Thor.
 
         Caveats of the bridge:
-          - ``mic_ppv`` on the produced Event carries Thor's dB(L) value
-            verbatim — the UI distinguishes via the ``device_family``
-            column (Phase 1).  Don't run the BW psi→dBL converter on
-            Series IV rows.
+          - ``PeakValues.micl`` carries the mic peak in **psi** (matching
+            BW's convention) — set from :attr:`IdfPeaks.mic_pspl_psi`,
+            with a dB(L)→psi fallback when only the dB(L) value is
+            available.  This is what the h5 writer's mic-scale-factor
+            logic needs.  The dB(L) value still flows through
+            ``bw_report.mic.pspl_dbl`` (set by the
+            ``idf_to_bw_report`` adapter) and the renderer reads it
+            from there for the report header.
           - Many Thor-specific fields (Peak Acceleration / Displacement,
             sensor self-check, calibration) don't have a slot in
             ``Event``.  The full IdfReport is preserved on the
@@ -349,11 +364,17 @@ class IdfEvent:
             minute=self.timestamp.minute,
             second=self.timestamp.second,
         )
+        # Resolve mic peak as psi.  Priority: binary-derived mic_pspl_psi
+        # (set by read_idf_file) > dB(L)→psi fallback via standard formula
+        # (psi = 2.9e-9 × 10^(dBL/20)) > None.
+        mic_psi = self.peaks.mic_pspl_psi
+        if mic_psi is None and self.peaks.mic_pspl_dbl is not None:
+            mic_psi = 2.9e-9 * (10.0 ** (self.peaks.mic_pspl_dbl / 20.0))
         pv = PeakValues(
             tran=self.peaks.transverse_ips,
             vert=self.peaks.vertical_ips,
             long=self.peaks.longitudinal_ips,
-            micl=self.peaks.mic_pspl_dbl,   # dB(L) — see caveat above
+            micl=mic_psi,   # psi, matching BW's convention (h5 scaling depends on this)
             peak_vector_sum=self.peaks.peak_vector_sum_ips,
         )
         pi = ProjectInfo(