debug(protocol): event-N probe is now at counter = start_offset instead of start_offset + 0x46

CHANGELOG.md

@@ -4,6 +4,29 @@ All notable changes to seismo-relay are documented here.
 
 ---
 
+## v0.14.1 — 2026-05-04
+
+### Fixed
+
+- **`read_bulk_waveform_stream` — event-N probe counter off-by-`0x46`.**
+  Continuation events (start_key[2:4] != 0) were being probed at counter
+  `start_offset + 0x0046` instead of just `start_offset`.  In the iteration
+  walk, `cur_key` from 1F is already the off=0x46 WAVEHDR record key, so the
+  earlier formula effectively double-counted the WAVEHDR offset.  The probe
+  landed one WAVEHDR past the actual event start, the response no longer
+  contained the STRT record at byte 17, `parse_strt_end_offset` returned
+  `None`, and the chunk loop fell back to the `max_chunks=128` cap — walking
+  ~110 chunks of post-event circular-buffer garbage.  Verified against the
+  5-1-26 "copy 2nd address" and 5-4-26 BW 2-sec event captures: BW probes
+  counter=`0x2238` with key=`01112238` and STRT is present at byte 17 of
+  the response (end_offset=`0x417E`).
+- **CLAUDE.md / docs/instantel_protocol_reference.md** — corrected the
+  event-N section to clarify that `start_key` in those formulas is the
+  off=0x46 key, not the off=0x2C boundary key, and removed the spurious
+  `+0x46` from the chunk-walk pseudocode.
+
+---
+
 ## v0.12.6 — 2026-05-01
 
 ### Fixed