chore(release): v0.26.0 — series-3 decode correctness

Two body-model rewrites, a systematic scale error affecting every
geophone reading the system ever produced, a recovered file format, and
two artifact-hygiene bugs where stale files outlived the decodes that
made them.

  - geo full scale is 32000 ADC counts, not 32768 (every reading 2.34% low)
  - the waveform body is a record chain, not a tag stream
  - the histogram block is big-endian, with a terminal tail
  - sub-minute intervals pack several per block (415 files recovered)
  - three more defects found by a full-corpus sweep, each masking the next
  - stale .h5 files and stale shape_* columns are now cleared, not left

All 11,603 series-3 binaries in the production snapshot pass every check.
Ground truth: 1,211/1,211 histograms exact per-interval, 75/75 waveform
sample counts exact, multi-interval fixture exact on all 45,680 values.

Also corrects a changelog note that went stale within the same day: the
"3 of 75 events still truncate" item was resolved by the record-chain
rewrite, and the remaining open items are now listed explicitly.

CLAUDE.md gains a "Where things stand" block at the top — the header had
been reading v0.21.0, four releases behind, which is the first thing you
see when picking the project back up.

Tests: 259 passed; the 16 failures are pre-existing (gitignored
fixtures) and unchanged from baseline.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HgTe8CamXAHcAmaQ6QNcog

CHANGELOG.md

@@ -6,6 +6,16 @@ All notable changes to seismo-relay are documented here.
 
 ## [Unreleased]
 
+---
+
+## v0.26.0 — 2026-08-27
+
+**Series-3 decode correctness.**  Two body-model rewrites, a systematic
+scale error affecting every geophone reading ever produced, a recovered
+file format, and two artifact-hygiene bugs where stale files outlived the
+decodes that made them.  All 11,603 series-3 binaries in the production
+snapshot now pass every check.
+
 ### Fixed
 
 - **Series-3 health sweep: 11,603 / 11,603 binaries now clean on every check.**
@@ -261,11 +271,22 @@ gitignored fixtures).
   the ACH queue with garbage events. Store-wide it affects 2 units of 21 across
   6 episodes; see `scratch/offset_candidates.csv` and the project memory notes.
 
-- **Still open:** 3 of 75 ground-truth events truncate at a segment-header
-  variant with a variable-width prefix before the channel-id field (2, 4 or 6
-  bytes observed) and an `01 00` marker instead of `02 00`. See the protocol
-  reference, "Unmapped: variable-prefix segment descriptors". Examples:
-  `BE12599/N599LPNB.JF0W` at body offset 1155, `BE9558/K558LOF2.820W` at 1485.
+- ~~**Still open:** 3 of 75 ground-truth events truncate at a segment-header
+  variant with a variable-width prefix.~~ **Resolved later the same day** — the
+  record-chain rewrite (above) showed there is no variable prefix; it was
+  walker drift. All 75 are now sample-count exact.
+
+- **Still open after this release:**
+  - **Series-4 (Thor / Micromate) is not verified** — UM-series sits at ~48%
+    against device peaks with a ~1.7% systematic bias and a near-zero tail.
+    Thor IDFW is pinned to `decode_waveform_legacy` deliberately.
+  - **14 sensitive-range files** show a decoded/truth ratio of exactly 8.0
+    (= 10.0/1.25) — a units bug, not a codec one. Never chased.
+  - **`backfill_sidecars.py --force` also inserts DB rows** for store files
+    that have none (1,286 on the snapshot; one-time per store), and the
+    dry-run does not report that count before you commit to it.
+  - **Verification is uneven:** per-sample proof on the 11% of files with a
+    preserved `_ASCII.TXT`, peak-and-structure consistency on the other 89%.
 
 ---
 

CLAUDE.md

@@ -2,7 +2,34 @@
 
 Ground-up Python replacement for **Blastware**, Instantel's Windows-only software for
 managing MiniMate Plus seismographs. Connects over direct RS-232 or cellular modem
-(Sierra Wireless RV50 / RV55). Current version: **v0.21.0**.
+(Sierra Wireless RV50 / RV55). Current version: **v0.26.0**.
+
+---
+
+## Where things stand (updated 2026-08-27)
+
+Read this first when picking the project back up.
+
+- **Series-3 decode is correct and verified.** All 11,603 series-3 binaries in
+  the prod snapshot pass every check (channel lengths, peaks vs the device's
+  own reported PPV, nothing above full scale, length vs declared record time).
+  Ground truth: 1,211/1,211 histograms exact per-interval and 75/75 waveform
+  sample counts exact against preserved Blastware ASCII exports.
+  ⚠ That is per-sample proof on 11% of files and peak-only consistency on the
+  other 89% — see `docs/instantel_protocol_reference.md` §7.6.1.
+- **Series-4 (Thor / Micromate) is NOT verified.** UM-series sits at ~48%
+  against device peaks with a ~1.7% systematic bias and a near-zero tail.
+  Thor IDFW is pinned to `decode_waveform_legacy` deliberately.
+- **Open, not blocking:** 14 sensitive-range files show an exact 8x
+  (= 10.0/1.25) units discrepancy; `scripts/backfill_sidecars.py --force` also
+  inserts DB rows for store files that have none (one-time per store) and the
+  dry-run does not report that count.
+- **After any codec change, regenerate the store** — `backfill_sidecars.py
+  --force` then `backfill_event_shape.py`, DB backup first. Stored `.h5` files
+  do not update themselves.
+- **Parked:** the "offset" hardware-fault investigation (Appendix E of the
+  protocol reference) pending the multi-year BW archive.
+
 
 When new information about the protocol is discovered, please update the instantel_protocol_reference.md with the findings in addition to this document
 

pyproject.toml

@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
 
 [project]
 name = "seismo-relay"
-version = "0.25.0"
+version = "0.26.0"
 description = "Python client and REST server for MiniMate Plus seismographs"
 requires-python = ">=3.10"
 dependencies = [

sfm/server.py

@@ -90,7 +90,7 @@ app = FastAPI(
         "Implements the minimateplus RS-232 protocol library.\n"
         "Proxied by terra-view at /api/sfm/*."
     ),
-    version="0.25.0",
+    version="0.26.0",
 )
 
 # Allow requests from the waveform viewer opened as a local file (file://)