feat: implement geophone sensitivity and recording mode settings in compliance config

2026-04-20 17:03:58 -04:00
parent eec6c3dc6a
commit b6ffdcfa87
7 changed files with 110 additions and 34 deletions
@@ -361,9 +361,11 @@ class ComplianceConfig:
                                                 # Firmware uses: PPV (in/s) = ADC_voltage (V) × 6.206053
                                                 # Identical on BE11529 and BE18189 — same Instantel geophone hardware.
                                                 # NOT a user-configurable setting. Must NOT be written.
-    geo_range: Optional[int] = None             # range selector: uint8 at Tran+20
-                                                 # hypothesis: 0x01 = Normal 10.000 in/s, 0x00 = Sensitive 1.25 in/s
-                                                 # reads 0x01 on all tested units — UNCONFIRMED (need 1.25 in/s capture)
+    geo_range: Optional[int] = None             # range/sensitivity selector — CONFIRMED 2026-04-20
+                                                 # 0x00 = Normal    10.000 in/s  (standard gain)
+                                                 # 0x01 = Sensitive  1.250 in/s  (high gain)
+                                                 # Offset: Tran+33 in both E5 read and SUB 71 write payloads
+                                                 # (same 2126-byte buffer is round-tripped; applied to Tran/Vert/Long)

    # Project/setup strings (sourced from E5 / SUB 71 write payload)
    # These are the FULL project metadata from compliance config,