Adds a new CapturingTransport wrapper in minimateplus.transport that mirrors
every TX/RX byte to two raw .bin files using the same on-wire format as
bridges/ach_mitm.py, so the resulting captures are byte-for-byte compatible
with the existing Blastware MITM captures and load directly in the Analyzer.
A new "Download" tab in seismo_lab.py lets the user connect to a device over
TCP or serial and run connect / list-keys / download-events while the wrapper
saves raw_bw_<ts>.bin (our TX) and raw_s3_<ts>.bin (device TX) into a
seismo_dl_<ts>[_<label>]/ session directory. On completion, the panel hands
both files to the Analyzer and switches tabs, mirroring the UX of the
existing Bridge capture flow.
Add full decode pipeline for 0x2C partial records from the device's event
list, representing continuous monitoring intervals where no threshold was
crossed. These records appear interleaved with full triggered events in the
browse walk and were previously ignored.
minimateplus/models.py
- Add MonitorLogEntry dataclass: key, start_time, stop_time, serial,
geo_threshold_ips, raw_header, duration_seconds property
minimateplus/protocol.py
- read_waveform_header() now returns (data_rsp.data, length) — full payload
including the record-type byte at position 0 — instead of the sliced header.
Callers that need the old slice use raw_data[11:11+length] as before.
minimateplus/client.py
- Add _decode_0a_partial_header(): auto-detects 9-byte (sub_code=0x10) vs
10-byte (sub_code=0x03) timestamp format, handles 1-byte inter-timestamp
gap, extracts serial via BE anchor and geo threshold via Geo: anchor.
- Add get_monitor_log_entries(skip_keys=None): browse walk (1E → 0A → 1F),
decodes partial records, skips full records and already-seen keys.
minimateplus/__init__.py
- Export MonitorLogEntry
bridges/ach_server.py
- After get_events(), call get_monitor_log_entries(skip_keys=seen_keys) and
save new entries to monitor_log.json in the session directory.
- Add _monitor_log_entry_to_dict() helper.
- Include monitor log keys in downloaded_keys for state persistence.
CLAUDE.md / CHANGELOG.md
- Document 0x2C partial record layout (timestamp format, ASCII metadata
region, 1-byte gap edge case) confirmed from 4-11-26 MITM capture.
- Version bump to v0.10.0; update What's next.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- minimateplus/transport.py: add TcpTransport — stdlib socket-based transport
with same interface as SerialTransport. Overrides read_until_idle() with
idle_gap=1.5s to absorb the modem's 1-second serial data forwarding buffer.
- minimateplus/client.py: make `port` param optional (default "") so
MiniMateClient works cleanly when a pre-built transport is injected.
- minimateplus/__init__.py: export SerialTransport and TcpTransport.
- sfm/server.py: add `host` / `tcp_port` query params to all device endpoints.
New _build_client() helper selects TCP or serial transport automatically.
OSError (connection refused, timeout) now returns HTTP 502.
- docs/instantel_protocol_reference.md: add changelog entry and full §14
(TCP/Modem Transport) documenting confirmed transparent passthrough, no ENQ
on connect, modem forwarding delay, call-up vs ACH modes, and hardware note
deprecating Raven X in favour of RV55/RX55.
Usage: GET /device/info?host=<modem_ip>&tcp_port=12345
Claude
claude