User intuition (16-bit) + 12-bit packing hypothesis + the int16 ADC
range constraint led to the final piece.
30 NN block format (CONFIRMED across all 14 blocks in the fixture
bundle):
NN 12-bit signed deltas packed as NN/4 groups of 6 bytes each.
Within each group:
bytes [0:2] = 16 bits = 4 × 4-bit high nibbles (MSB-first)
bytes [2:6] = 4 × int8 low bytes
delta[k] = sign_extend_12((high_nibble[k] << 8) | low_byte[k])
Block length = NN × 1.5 + 2 bytes (tag included). Earlier walker
used NN × 4 which is only correct in the TRAILER section.
Why 12-bit: ±2047 in 16-count units ≈ ±10 in/s = the geophone's
full-scale range at Normal sensitivity. The codec sizes its widest
delta to cover the worst-case sample-to-sample change.
Results: every decoded sample across all fixture events matches truth
byte-exact. ZERO divergences.
event-a: 9984 samples (full event, all 3 geos)
event-c: 3840 (full event)
event-d: 3840 (full event)
JQ0: 9984 (full event)
V70: 9984 (full event)
SP0: 5122 (walker stops early on edge cases)
SS0: 1758
SV0: 2114
event-b: 738
TOTAL: 47,364 ADC samples verified, zero errors.
Three full 3-sec events decode end-to-end across all three geo
channels. The events where fewer samples decode (SP0/SS0/SV0/event-b)
are limited by walker robustness issues past the first few segments,
NOT by decoder correctness.
64 tests pass (up from 55). Files: minimateplus/waveform_codec.py
(new 30 NN decode + corrected walker length), tests/test_waveform_codec.py
(new full-event regression tests), docs/* (updated status everywhere),
analysis/test_30nn_hybrid.py (new — the analysis script that confirmed
the format).
User asked the right question: do events without 30 NN blocks decode
fully? Answer: YES.
event-a: Tran 3328 ✓ Vert 3328 ✓ Long 3328 ✓ (28 segments, 0 '30 NN')
event-c: Tran 1280 ✓ Vert 1280 ✓ Long 1280 ✓ (12 segments, 0 '30 NN')
event-d: Tran 1280 ✓ Vert 1280 ✓ Long 1280 ✓ (12 segments, 0 '30 NN')
17,664 ADC samples decoded byte-exact against BW's ASCII export.
Zero divergences across event-a, event-c, event-d.
This means the codec is FULLY SOLVED for any event without 30 NN
blocks. The remaining gap is the 30 NN block format only — used for
high-amplitude regions where deltas exceed int8 range. For quiet
events (or quiet stretches of loud events), the decoder is complete.
9 new regression tests bring the total to 55, all passing.
Files: tests/test_waveform_codec.py + docs/waveform_codec_re_status.md
+ new analysis/verify_quiet_bundle.py.
The segment-channel scoring analyzer (from scratch/next_experiment_skeleton.py)
ran and immediately confirmed the rotation hypothesis:
SP0 seg 0: best fit Vert 508/508 ✓
SP0 seg 1: best fit Long 508/508 ✓
SP0 seg 3: best fit Tran 508/508 ✓ (Tran continuation)
SP0 seg 5: best fit Long 508/508 ✓
SP0 seg 9: best fit Long 508/508 ✓
V70 seg 0: best fit Vert 508/508 ✓
V70 seg 1: best fit Long 508/508 ✓
Channels rotate Tran → Vert → Long → MicL per 40 02 segment header.
Also discovered the segment header has DOUBLE duty: bytes [14:18] anchor
the NEW segment's channel (2 samples as int16 BE in 16-count units), AND
bytes [0:4] extend the PREVIOUS channel by 2 more samples (2 deltas as
int16 BE). This is the same "2 anchors + delta stream" structure as the
body preamble for Tran.
decode_waveform_v2 now returns full per-channel sample dicts.
Byte-exact verified ranges:
V70: Tran 512, Vert 512, Long 512 (all first segments)
JQ0: Tran 512, Vert 258
SP0: Long 1536 (all 3 L segments)
Still open: the 30 NN block format (high-amplitude packed deltas) —
appears mid-segment when single-byte deltas can't carry the magnitude.
6 new tests bring the count to 46. All passing.
User uploaded a Vert-heavy event (JQ0) and a Mic-heavy event (V70).
Those two were exactly what was needed to crack the next piece:
- 00 NN block = run-length-encoded zero deltas in the current channel.
Append NN copies of the current cumulative value (no change).
- find_data_start now recognizes 00 NN as a valid first tag (some events
begin with a leading 00 NN RLE block).
- decode_tran_initial now decodes the FULL segment 0 (not just the first
data block).
Results across 5 fixture events:
- M529LL1A.SP0 (loud-all-channels) : 510 / 510 ✓
- M529LL1L.JQ0 (Vert-heavy) : 510 / 510 ✓
- M529LL1L.V70 (Mic-heavy) : 510 / 510 ✓
- M529LL1A.SV0 (loud-from-start) : 58 / 58 ✓
- M529LL1A.SS0 (loud-from-start) : 42 / 502 (stops at first 30 04)
The 30 04 block (only seen in loud-from-start events) hasn't been
decoded yet — likely a channel-switch marker for the high-amplitude
regime.
Also discovered: segment header (40 02) payload bytes [0:2] = T_delta
at first sample of new segment, [6:8] = byte length to next segment.
Multi-segment Tran decoding still diverges after sample 512 because
the per-segment channel ordering after the header is unknown.
Tests: 40 pass (up from 36).
Files:
- minimateplus/waveform_codec.py: find_data_start fix, RLE handling,
full segment-0 decode in decode_tran_initial
- tests/test_waveform_codec.py: synthetic RLE test, full segment 0
tests for JQ0 and V70
- tests/fixtures/5-11-26/: M529LL1L.JQ0, M529LL1L.V70 + TXT exports
- docs/instantel_protocol_reference.md §7.6.1: RLE + segment-header docs
User uploaded 3 high-amplitude events (PPV 6-7 in/s — shook the geophone
hard) to decode-re/5-11-26/. These cracked the Tran codec:
- Preamble bytes [3:5] and [5:7] = Tran[0] and Tran[1] as int16 BE
in 16-count units (LSB = 0.005 in/s). Confirmed across all 7
fixtures.
- First data block carries Tran deltas from sample 2 onward:
* 10 NN block: NN/2 bytes of payload, each byte = two 4-bit signed
nibble deltas (high nibble first)
* 20 NN block: NN int8 signed deltas
Verified 22+42+46 = 110 Tran samples across SP0/SS0/SV0 with 0 errors
against BW's ASCII export.
Why the earlier 96-combination brute force failed: the quiet 5-8
events all had T[0] = T[1] ≈ 0 so the preamble's per-channel encoding
was undetectable. Loud events made the encoding obvious.
What's solved:
- minimateplus.waveform_codec.decode_tran_initial: returns first
N Tran samples in 16-count units for any body.
- Walker length formula for in-data 30 NN blocks (NN*2 instead of NN*4).
- Walker now handles bodies that start with 20 NN (in addition to 10 NN).
What's still open:
- Tran past the first data block (multi-block channel switching).
- Vert / Long / MicL channel encodings.
- Walker correctness past offset ~427 in event-b.
Tests: 36 pass. decode_waveform_v2 still returns None — the full
multi-channel decoder is not wired up. decode_tran_initial is the
new verified entry point.
Files: minimateplus/waveform_codec.py, tests/test_waveform_codec.py
(adds 5-11-26 fixtures + decode_tran_initial tests), and
docs/instantel_protocol_reference.md §7.6.1 (Tran codec spec).
Decoded the structural framing of the Blastware waveform body — the bytes
between the 21-byte STRT record and the 26-byte file footer. The body is
a sequence of tagged variable-length blocks, NOT raw int16 LE. Five tag
types (10/20/00/30/40 NN) and their lengths are now confirmed against the
4-event May 2026 fixture bundle. Body splits cleanly into ~16 segments
(for a 1280-sample event) separated by 40 02 segment headers carrying a
monotonically incrementing uint32 LE counter at bytes [8:12].
What's done:
- minimateplus/waveform_codec.py — block walker, segment splitter, segment
header parser. decode_waveform_v2 is a stub returning None until the
byte-to-sample mapping is solved; client.py is unchanged.
- tests/test_waveform_codec.py — 31 tests covering block detection, lengths,
contiguous-walk, segment splitting, segment-header parsing, and counter
monotonicity. All pass.
- tests/fixtures/decode-re-5-8-26/ — bundled fixtures (4 events, BW binary
+ Blastware ASCII export each).
- docs/instantel_protocol_reference.md §7.6.1 — replaced retraction box
with the verified structural decoding plus an explicit list of what's
still open.
What's still open: the per-byte mapping inside 10 NN / 20 NN blocks. 96
channel-permutation × nibble-order × sign-convention combinations were
brute-force tested; none match BW's ASCII export to within ±1 ADC count.
The codec is more elaborate than uniform 4-bit deltas — likely a hybrid
variable-bit-width scheme with segment-anchor resync points. Next
recommended step: capture an event with a known calibration tone to pin
down magnitude scaling.
Walker also bails out partway through event-b (open issue documented in
both the module and the protocol reference).
Claude