- Update `s3_bridge.py` to default raw capture file paths to "auto" for timestamped naming.
- Modify `gui_bridge.py` to pre-check raw capture options and streamline path handling.
- Extend `ach_server.py` to save both incoming and outgoing raw bytes for analysis.
- Revise `CHANGELOG.md` and `instantel_protocol_reference.md` to reflect changes in recording mode handling and compliance data encoding.
- Added `CallHomeConfig` model to represent the Auto Call Home settings.
- Introduced methods in `MiniMateClient` for reading (`get_call_home_config`) and writing (`set_call_home_config`) the call home configuration.
- Updated `MiniMateProtocol` with new commands for call home operations (SUB 0x2C for read, SUB 0x7E for write, and SUB 0x7F for confirm).
- Created API endpoints for retrieving and updating call home settings in the server.
- Enhanced the web interface with a new "Call Home" tab for user interaction with call home settings.
- Implemented JavaScript functions for reading and writing call home configurations from the web app.
SESSION_RESET (41 03) is sent before each POLL frame to wake monitoring
units. The ETX lookahead in parse_bw only checked for ACK+STX directly
after ETX, so when 41 03 followed a frame's ETX, the check failed and the
ETX was swallowed into the body as a payload byte — giving a 19-byte body
instead of 17 for POLL frames and failing checksum validation.
Fix: scan past any SESSION_RESET (41 03) sequences when looking for the
next frame start, so the real ACK+STX boundary is found correctly.
Also adds SUM8 checksum validation to parse_s3, which previously left
checksum_valid=None for all S3 frames.
https://claude.ai/code/session_014NczSHUz9uTzCAf4cVASTJ
Rewrites the v0.6.0 README to reflect current project state:
ACH server, SQLite DB, SFM REST API with caching, monitor/erase, updated roadmap.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Ports the intelligent-caching branch concept to a plain Python in-memory
implementation — no SQLAlchemy, no extra DB table, no new dependencies.
_LiveCache (threading.Lock + dicts) caches:
- device info: indefinite, invalidated by POST /device/config
- events: keyed by (conn_key, device_event_count); count-probe fast path
(~2s poll+count_events) avoids full downloads when nothing is new
- monitor status: 30-second TTL, invalidated by monitor start/stop
- waveforms: permanent per (conn_key, event_index)
All four cached endpoints accept ?force=true to bypass the cache.
Removes sfm/cache.py (SQLAlchemy experiment, now superseded).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
sfm/database.py (new)
- SeismoDb class: three tables keyed by unit serial number
- ach_sessions: one row per ACH call-home
- events: one row per triggered event, deduped by (serial, waveform_key)
- monitor_log: one row per monitoring interval, deduped by (serial, waveform_key)
- WAL mode, per-request connections, silent dedup via UNIQUE constraint
- Query helpers: query_events(), query_monitor_log(), get_sessions(), query_units()
- false_trigger flag on events for future review UI / report filtering
bridges/ach_server.py
- Import SeismoDb; create shared instance at startup pointed at
bridges/captures/seismo_relay.db
- After each call-home: insert_events() + insert_monitor_log() + insert_ach_session()
- DB failures logged as warnings, never abort the session
sfm/server.py
- Import SeismoDb; lazy singleton via _get_db()
- New DB read endpoints: GET /db/units, /db/events, /db/monitor_log, /db/sessions
- PATCH /db/events/{id}/false_trigger for manual review flagging
CLAUDE.md / CHANGELOG.md
- Document DB schema, SFM DB endpoints, architecture decision (unit-keyed only)
- Version bump to v0.11.0
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add full decode pipeline for 0x2C partial records from the device's event
list, representing continuous monitoring intervals where no threshold was
crossed. These records appear interleaved with full triggered events in the
browse walk and were previously ignored.
minimateplus/models.py
- Add MonitorLogEntry dataclass: key, start_time, stop_time, serial,
geo_threshold_ips, raw_header, duration_seconds property
minimateplus/protocol.py
- read_waveform_header() now returns (data_rsp.data, length) — full payload
including the record-type byte at position 0 — instead of the sliced header.
Callers that need the old slice use raw_data[11:11+length] as before.
minimateplus/client.py
- Add _decode_0a_partial_header(): auto-detects 9-byte (sub_code=0x10) vs
10-byte (sub_code=0x03) timestamp format, handles 1-byte inter-timestamp
gap, extracts serial via BE anchor and geo threshold via Geo: anchor.
- Add get_monitor_log_entries(skip_keys=None): browse walk (1E → 0A → 1F),
decodes partial records, skips full records and already-seen keys.
minimateplus/__init__.py
- Export MonitorLogEntry
bridges/ach_server.py
- After get_events(), call get_monitor_log_entries(skip_keys=seen_keys) and
save new entries to monitor_log.json in the session directory.
- Add _monitor_log_entry_to_dict() helper.
- Include monitor log keys in downloaded_keys for state persistence.
CLAUDE.md / CHANGELOG.md
- Document 0x2C partial record layout (timestamp format, ASCII metadata
region, 1-byte gap edge case) confirmed from 4-11-26 MITM capture.
- Version bump to v0.10.0; update What's next.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
CHANGELOG.md:
- New v0.9.0 section covering erase-all protocol, browse helpers,
delete_all_events(), ach_mitm.py, and ACH server overhaul
- Back-filled v0.8.0 section (write pipeline, monitoring, ACH server)
that was missing from the previous release notes
CLAUDE.md:
- Bump version to v0.9.0
- Add erase-all protocol section with full wire sequence, SUB 0x06
storage range response layout, and post-erase key counter reset notes
- Document ACH server state format (ach_state.json v0.9.0 schema with
downloaded_keys + max_downloaded_key)
- Add RV55 DCD/DTR issue to What's next
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Listens for inbound unit connections, connects upstream to a real Blastware
ACH server, and forwards bytes bidirectionally while saving both directions to
raw_bw_<ts>.bin and raw_s3_<ts>.bin in the existing capture format.
Used to capture the 4-11-26 Blastware ACH session that confirmed the erase-all
protocol (SUBs 0xA3/0x1C/0x06/0xA2) and the event deletion wire sequence.
Usage:
python bridges/ach_mitm.py --bw-host 127.0.0.1 --bw-port 9999 --listen-port 9998
Point the unit's call-home destination at this machine:9998.
Point this proxy's --bw-host/port at the upstream Blastware ACH server.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
State format (ach_state.json):
- Replace event_count with downloaded_keys (set of hex strings) + max_downloaded_key
- Key-based tracking correctly handles delete-then-re-record: after device erase the
count drops to 0, but new events have new (or recycled) keys
Browse pre-check:
- list_event_keys() walk before get_events() to bail early when nothing is new
- get_events() called with skip_waveform_for_keys= for already-seen keys, so repeat
call-homes only download waveforms for genuinely new events
--clear-after-download flag:
- After saving new events, calls client.delete_all_events() (0xA3→0x1C→0x06→0xA2)
- On success: resets downloaded_keys=[] and max_downloaded_key="00000000" so the
next session starts fresh (device counter resets to 0x01110000 after erase)
Post-erase key-reuse detection:
- Device counter resets to 0x01110000 after any erase; new events reuse old keys
- If max(device_keys) < max_downloaded_key, the device was wiped externally
(Blastware, manual) — seen_keys is discarded and all device keys treated as new
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Event model uses peak_values (not peaks) and project_info (not direct fields).
PeakValues fields are tran/vert/long/micl/peak_vector_sum (not transverse etc).
ProjectInfo fields accessed via ev.project_info.project etc.
Also fix ev.timestamp serialization: use str() instead of .isoformat() since
Timestamp is a custom dataclass, not datetime.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
calibration_date, aux_trigger, setup_name etc. don't exist directly on
DeviceInfo — they live in DeviceInfo.compliance_config (ComplianceConfig).
_device_info_to_dict now accesses them via cc = d.compliance_config.
Log line updated to show serial/firmware/model/event_count instead.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
socket.accept() on Windows blocks indefinitely and ignores KeyboardInterrupt.
Setting a 1-second timeout on the server socket causes the accept loop to wake
up every second and re-check, so Ctrl-C is handled within ~1 second.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Session directory and log file are now created ONLY after startup() succeeds.
Internet scanners and dropped connections no longer litter the output folder.
Raw bytes are buffered in memory until startup succeeds, then flushed to disk.
- Add --allow-ip IP flag (repeatable) to allowlist specific source IPs.
Connections from un-listed IPs are rejected immediately (socket closed, no log).
If no --allow-ip flags are given, all IPs are still accepted (original behavior).
Usage: --allow-ip 63.43.212.232 --allow-ip 152.1.2.3
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
_decode_event_count: read uint16 BE at offset 10 (confirmed 2026-04-10 from
live BE11529 event index — data[10:12]=0x0006=6, matches device LCD).
Previous uint32 at offset 3 always returned 1 regardless of event count.
ach_server.py: use device_info.event_count (already fetched during connect())
instead of calling count_events() separately. This saves 2*N round-trips and
avoids the 1F linked-list walk which was overcounting on some devices.
count_events() kept as fallback when connect() is skipped (--events-only).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace all Unicode arrows/checkmarks (-> [OK] [FAIL]) in ach_server.py
and client.py log calls — Windows cp1252 console can't encode them
- Fix DeviceInfo attribute: serial_number -> serial
- Fix _device_info_to_dict key: serial_number -> serial
- Demote count_events 1E/1F per-key log lines from WARNING to DEBUG
(they were flooding the console on devices with many stored events)
- FileHandler now opens with encoding='utf-8' so session log files
can hold any characters without codec errors
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
claude
serversdown
Claude