Add read_bulk_waveform_stream() to MiniMateProtocol and wire it into
get_events() so each event gets authoritative client/operator/sensor_location
from the A5 frames recorded at event-time, not the current compliance config.
- framing.py: bulk_waveform_params() and bulk_waveform_term_params() helpers
(probe/chunk params and termination params for SUB 5A, confirmed from
1-2-26 BW TX capture)
- protocol.py: read_bulk_waveform_stream(key4, stop_after_metadata=True) —
probe + chunk loop (counter += 0x0400), early stop when b"Project:" found
(A5[7] of 9), then sends termination at offset=0x005A
- client.py: _decode_a5_metadata_into() needle-searches concatenated A5 frame
data for Project/Client/User Name/Seis Loc/Extended Notes; get_events() now
calls SUB 5A after each SUB 0C, overwriting project_info with event-time values
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Old key was (page_key, chunk_len) which would incorrectly drop a second
config section that has the same length as the first (e.g. current-config
vs event-time-config when settings haven't changed).
New key is the full chunk bytes — only truly byte-identical chunks are
dropped. Different data that happens to share page_key and length now
comes through correctly.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Two-step probe+fetch for SUB 08 (EVENT_INDEX), returning the raw 88-byte
(0x58) index block. SUB_EVENT_INDEX and DATA_LENGTHS[0x08]=0x58 were
already registered — this just wires the method that calls them.
Docstring notes the partially-decoded layout (event count at +3 as uint32 BE,
timestamps at +7) pending live device confirmation.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
BE11529 sometimes returns frame D with page_key=0x0000 (44 bytes),
identical to the frame B response, inflating cfg to ~1115 bytes and
mis-aligning all field offsets. Track (page_key, chunk_size) pairs
and drop any repeat before appending to the running config buffer.
Reverse-engineered the full Blastware 4-frame sequence for SUB 1A:
A (probe): offset=0x0000, params[7]=0x64
B (data req 1): offset=0x0400, params[2]=0x00, params[7]=0x64 → bytes 0..1023
C (data req 2): offset=0x0400, params[2]=0x04, params[7]=0x64 → bytes 1024..2047
D (data req 3): offset=0x002A, params[2]=0x08, params[7]=0x64 → bytes 2048..2089
We were only sending A+D and getting 44 bytes (the last chunk).
Now sends B, C, D in sequence; each E5 response has 11-byte echo header
stripped, and chunks are concatenated. Devices that return all data in
one frame (BE18189 style) are handled — timeouts on B/C are skipped
gracefully and data from D still accumulates.
Total expected: 0x0400 + 0x0400 + 0x002A = 0x082A = 2090 bytes.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
BE11529 sends the compliance config (SUB 1A / E5 response) as a stream
of small frames (~44 bytes each) rather than one large frame like BE18189.
Changes:
- read_compliance_config(): loop calling _recv_one() until 0x082A bytes
accumulated or 2s inter-frame gap; first frame strips 11-byte echo header,
subsequent frames logged in full for structure analysis
- _recv_one(): add reset_parser=False option to preserve parser state and
_pending_frames buffer between consecutive reads from one device response;
also stash any extra frames parsed in a single TCP chunk so they are not lost
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds full support for reading device compliance configuration (2090-byte E5
response) containing record time, trigger/alarm levels, and project strings.
protocol.py:
- Implement read_compliance_config() two-step read (SUB 1A → E5)
- Fixed length 0x082A (2090 bytes)
models.py:
- Add ComplianceConfig dataclass with fields: record_time, sample_rate,
trigger_level_geo, alarm_level_geo, max_range_geo, project strings
- Add compliance_config field to DeviceInfo
client.py:
- Implement _decode_compliance_config_into() to extract:
* Record time float at offset +0x28 ✅
* Trigger/alarm levels per-channel (heuristic parsing) 🔶
* Project/setup strings from E5 payload
* Placeholder for sample_rate (location TBD ❓)
- Update connect() to read SUB 1A after SUB 01, cache in device_info
- Add ComplianceConfig to imports
sfm/server.py:
- Add _serialise_compliance_config() JSON encoder
- Include compliance_config in /device/info response
- Updated _serialise_device_info() to output compliance config
Both record_time (at fixed offset 0x28) and project strings are ✅ CONFIRMED
from protocol reference §7.6. Trigger/alarm extraction uses heuristics
pending more detailed field mapping from captured data.
Sample rate remains undiscovered in the E5 payload — likely in the
mystery flags at offset +0x12 or requires a "fast mode" capture.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
