### Added
- **Layered event storage architecture.** Each event now lands as four
files in the per-serial waveform store, each with a clear role:
- `<filename>` — the Blastware-readable binary (BW file). Untouched.
- `<filename>.a5.pkl` — the raw 5A frames (regenerative source).
- `<filename>.h5` — clean per-channel waveform arrays in physical
units (in/s for geo, psi for mic) plus event metadata (HDF5 with
gzip compression). This is the canonical format for downstream
analysis tools.
- `<filename>.sfm.json` — the modern review/metadata sidecar (peaks,
project, source provenance, review state, extensions).
SQLite (`seismo_relay.db`) is the searchable index over all four.
- **Plot-ready waveform JSON (`sfm.plot.v1`).** The `/device/event/{idx}/waveform`
and `/db/events/{id}/waveform.json` endpoints now return samples in
physical units with explicit time-axis metadata, peak markers, and
per-channel unit hints — no more guessing the ADC-to-velocity scale
client-side. The webapp waveform viewer was rewritten to consume
this shape.
- **In-app waveform viewer accuracy fix.** The standalone SFM webapp
viewer was scaling geophone amplitudes by `geoAdcScale / 32767`
(≈ 6.206 / 32767), where `geoAdcScale = 6.206053` is the device's
*in/s per V* hardware constant — not the ADC-counts-to-velocity
factor. This silently scaled every plot ~38% too low for Normal-range
geophones (the correct full-scale is 10.0 in/s, or 1.25 in/s for
Sensitive). Conversion is now done server-side using the geo_range
from compliance config; the client just plots.
- New `sfm/event_hdf5.py` module: `write_event_hdf5()`,
`read_event_hdf5()`, plus a plot-JSON helper.
- Backfill script extended to also emit `.h5` for existing events.
### Dependencies
- Added `h5py>=3.10` and `numpy>=1.24` for the HDF5 storage layer.
- Added `python-multipart>=0.0.7` (required by FastAPI for the
`/db/import/blastware_file` endpoint introduced in this release).
- Added `waveform_key` and `event_timestamp` columns to `CachedEvent` and `CachedWaveform` for integrity verification.
- Implemented logic to flush the cache when a mismatch in (waveform_key, event_timestamp) is detected during event and waveform updates.
- Enhanced `set_events` and `set_waveform` methods to check for mismatches and trigger cache eviction as necessary.
- Introduced a new `LiveCache` class to manage in-memory caching of live device data, separating it from the server logic for better testability.
- Added tests to verify the correctness of cache invalidation logic, particularly for post-erase key reuse scenarios.
- Updated web application to include a "Force refresh" toggle, allowing users to bypass the cache and re-fetch data from the device.
For 2-second events at 1024 sps the "Project:" metadata frame appears
beyond chunk 32 (the old default cap), causing the safety limit to be
hit and ~34 KB of waveform data to be downloaded instead of stopping
at the metadata frame. Raising max_chunks to 128 ensures
stop_after_metadata=True can locate the metadata frame for record
times up to ~4 seconds.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Added `CallHomeConfig` model to represent the Auto Call Home settings.
- Introduced methods in `MiniMateClient` for reading (`get_call_home_config`) and writing (`set_call_home_config`) the call home configuration.
- Updated `MiniMateProtocol` with new commands for call home operations (SUB 0x2C for read, SUB 0x7E for write, and SUB 0x7F for confirm).
- Created API endpoints for retrieving and updating call home settings in the server.
- Enhanced the web interface with a new "Call Home" tab for user interaction with call home settings.
- Implemented JavaScript functions for reading and writing call home configurations from the web app.
Add full decode pipeline for 0x2C partial records from the device's event
list, representing continuous monitoring intervals where no threshold was
crossed. These records appear interleaved with full triggered events in the
browse walk and were previously ignored.
minimateplus/models.py
- Add MonitorLogEntry dataclass: key, start_time, stop_time, serial,
geo_threshold_ips, raw_header, duration_seconds property
minimateplus/protocol.py
- read_waveform_header() now returns (data_rsp.data, length) — full payload
including the record-type byte at position 0 — instead of the sliced header.
Callers that need the old slice use raw_data[11:11+length] as before.
minimateplus/client.py
- Add _decode_0a_partial_header(): auto-detects 9-byte (sub_code=0x10) vs
10-byte (sub_code=0x03) timestamp format, handles 1-byte inter-timestamp
gap, extracts serial via BE anchor and geo threshold via Geo: anchor.
- Add get_monitor_log_entries(skip_keys=None): browse walk (1E → 0A → 1F),
decodes partial records, skips full records and already-seen keys.
minimateplus/__init__.py
- Export MonitorLogEntry
bridges/ach_server.py
- After get_events(), call get_monitor_log_entries(skip_keys=seen_keys) and
save new entries to monitor_log.json in the session directory.
- Add _monitor_log_entry_to_dict() helper.
- Include monitor log keys in downloaded_keys for state persistence.
CLAUDE.md / CHANGELOG.md
- Document 0x2C partial record layout (timestamp format, ASCII metadata
region, 1-byte gap edge case) confirmed from 4-11-26 MITM capture.
- Version bump to v0.10.0; update What's next.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
_decode_event_count: read uint16 BE at offset 10 (confirmed 2026-04-10 from
live BE11529 event index — data[10:12]=0x0006=6, matches device LCD).
Previous uint32 at offset 3 always returned 1 regardless of event count.
ach_server.py: use device_info.event_count (already fetched during connect())
instead of calling count_events() separately. This saves 2*N round-trips and
avoids the 1F linked-list walk which was overcounting on some devices.
count_events() kept as fallback when connect() is skipped (--events-only).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace all Unicode arrows/checkmarks (-> [OK] [FAIL]) in ach_server.py
and client.py log calls — Windows cp1252 console can't encode them
- Fix DeviceInfo attribute: serial_number -> serial
- Fix _device_info_to_dict key: serial_number -> serial
- Demote count_events 1E/1F per-key log lines from WARNING to DEBUG
(they were flooding the console on devices with many stored events)
- FileHandler now opens with encoding='utf-8' so session log files
can hold any characters without codec errors
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ach_server.py:
- Add ach_state.json per-unit state tracking (keyed by serial number)
- count_events() before any download; skip session if no new events since last call-home
- Download only events beyond the previous high-water mark (all_events[last_count:])
- --max-events N safety cap for first-run units with many stored events
- state_path and max_events wired through AchSession constructor and serve()
client.py (_decode_monitor_status):
- Revert monitoring flag to section[1] == 0x10 (was incorrectly changed to section[6])
- Fix battery/memory offsets to section[-10:-8], [-8:-4], [-4:] (no trailing checksum byte)
- Both confirmed by full byte diff of all 144 0xE3 data frames in 4-8-26/2ndtry capture
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
section[6] is the monitoring flag (was wrongly section[1] — section[1] is always
0x00 in both states). Battery and memory fields use relative-from-end offsets
(section[-11:-9], section[-9:-5], section[-5:-1]) instead of absolute positions,
which broke when the payload grew by 3 bytes in monitoring mode.
Confirmed from full byte diff of 142 0xE3 frames in 4-8-26/2ndtry capture.
SFM start_monitoring now polls /device/monitor/status every 5s for up to 60s
instead of a fixed 25s delay (unit runs ~40s on-device sensor check before
confirming monitoring state).
Also corrects stale 1C→6E response anomaly claim in protocol reference — no
exceptions to the 0xFF−SUB rule are known.
- Introduced new SUBs for monitoring status, start, and stop commands in protocol.py.
- Implemented read_monitor_status, start_monitoring, and stop_monitoring methods in MiniMateProtocol class.
- Added new API endpoints for monitoring status retrieval and control in server.py.
- Enhanced the web application with a monitoring panel, including battery and memory status display.
- Created a new Python script to parse SUB 0x1C response frames for monitoring status.
- Documented the monitoring status response format and field locations in markdown and text files.
Frame index 9 was assumed to be the device terminator based on the
9-frame original blast capture. For streams with >9 frames (current
device produces 35), fi==9 is live waveform data — the skip was
dropping ~133 sample-sets per event.
Terminator detection is handled upstream via page_key==0x0000 in
read_bulk_waveform_stream, so no index-based skip is needed here.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Two improvements to eliminate the ~2-min-per-event wait and unnecessary
full-event-list download when only one event is requested:
1. protocol.py: pass timeout=10.0 to _recv_one in the 5A chunk loop.
Device responds within ~1s per chunk; 10s gives a safe 10x buffer.
End-of-stream detection (raw_bytes=1) now fires in 10s instead of 120s,
cutting ~110s of dead wait per event.
2. client.py: add stop_after_index parameter to get_events(). When set,
iteration stops immediately after the target event is collected — no
further 0A/1E/0C/5A/1F cycles for events the caller doesn't need.
3. server.py: pass stop_after_index=index to both /device/event/{idx}
and /device/event/{idx}/waveform endpoints so a single-event request
only downloads that one event.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
serversdown
claude