Blastware's ACH writes a per-event ASCII report (.TXT) alongside each
event binary, containing the rich derived per-channel fields BW
computes (PPV, ZC Freq, Time of Peak, Peak Acceleration, Peak
Displacement, Peak Vector Sum + time, sensor self-check Pass/Fail,
monitor-log timestamps). None of this lives in the BW binary itself.
When the watcher daemon forwards both files to /db/import/blastware_file
in one multipart POST, we now:
- Pair binaries with their .TXT partners by filename match
- Parse the report into a structured BwAsciiReport
- Land the rich fields in a new top-level `bw_report` block of the
sidecar JSON
- Overlay the report's peaks/project_info/timestamp/sample_rate/
record_time/total_samples/pretrig_samples onto the canonical
sidecar fields (the report values are device-authoritative; the
BW-binary STRT-derived values had bugs like reading the 0x46
record-type marker as rectime)
This unblocks the monthly-summary review workflow — events become
sortable/filterable by peak, location, project, etc. — without
depending on the still-undecoded waveform body codec.
### Added
- **Layered event storage architecture.** Each event now lands as four
files in the per-serial waveform store, each with a clear role:
- `<filename>` — the Blastware-readable binary (BW file). Untouched.
- `<filename>.a5.pkl` — the raw 5A frames (regenerative source).
- `<filename>.h5` — clean per-channel waveform arrays in physical
units (in/s for geo, psi for mic) plus event metadata (HDF5 with
gzip compression). This is the canonical format for downstream
analysis tools.
- `<filename>.sfm.json` — the modern review/metadata sidecar (peaks,
project, source provenance, review state, extensions).
SQLite (`seismo_relay.db`) is the searchable index over all four.
- **Plot-ready waveform JSON (`sfm.plot.v1`).** The `/device/event/{idx}/waveform`
and `/db/events/{id}/waveform.json` endpoints now return samples in
physical units with explicit time-axis metadata, peak markers, and
per-channel unit hints — no more guessing the ADC-to-velocity scale
client-side. The webapp waveform viewer was rewritten to consume
this shape.
- **In-app waveform viewer accuracy fix.** The standalone SFM webapp
viewer was scaling geophone amplitudes by `geoAdcScale / 32767`
(≈ 6.206 / 32767), where `geoAdcScale = 6.206053` is the device's
*in/s per V* hardware constant — not the ADC-counts-to-velocity
factor. This silently scaled every plot ~38% too low for Normal-range
geophones (the correct full-scale is 10.0 in/s, or 1.25 in/s for
Sensitive). Conversion is now done server-side using the geo_range
from compliance config; the client just plots.
- New `sfm/event_hdf5.py` module: `write_event_hdf5()`,
`read_event_hdf5()`, plus a plot-JSON helper.
- Backfill script extended to also emit `.h5` for existing events.
### Dependencies
- Added `h5py>=3.10` and `numpy>=1.24` for the HDF5 storage layer.
- Added `python-multipart>=0.0.7` (required by FastAPI for the
`/db/import/blastware_file` endpoint introduced in this release).
serversdown