- Created a comprehensive runbook (`wedged_unit_recovery.md`) detailing the recovery process for units stuck in a call-home loop, including symptoms, recovery steps, and explanations of the failure mode.
- Added `blind_stop.sh` script to send stop-monitoring commands in a tight loop for unresponsive devices.
- Introduced `rescue_device.sh` script to disable Auto Call Home and erase events from a busy device.
- Implemented `slow_drip.sh` script to send stop-monitoring frames at a slow rate to prevent UART overrun.
- Developed `spam_stop.sh` script to rapidly send stop-monitoring commands to a device.
- Created `watch_unit.sh` script for passive monitoring of device reachability, logging results over time.
Pre-v0.16.1 (commit aac1c8e), every event ingested through
read_blastware_file got record_type="Waveform" regardless of actual
type because the field was hardcoded. New ingests derive correctly
from the AB0T filename scheme (H/W/M/E/C). Existing rows still hold
the wrong value.
This script walks the events table, derives the correct record_type
from each row's blastware_filename, and bulk-updates rows that differ.
Idempotent + dry-run by default.
Usage:
python -m scripts.backfill_record_type --db bridges/captures/seismo_relay.db
python -m scripts.backfill_record_type --db bridges/captures/seismo_relay.db --apply
Terra-view's event-detail modal already derives the record_type
client-side from the filename for display, so operators see the
correct type in the UI even before this backfill runs. This script
brings the DB column in line with what the UI is already showing —
matters for reporting and any downstream consumer that reads the
column directly.
The /db/import/blastware_file endpoint was bucketing every
forwarded event into serial='UNKNOWN' in the DB. WaveformStore
correctly decoded the serial from the BW filename and saved
files to <store>/<serial>/<filename> (e.g.
.../BE17353/S353L5KC.DR0H.h5), but the endpoint code called
db.insert_events(serial=_serial_from_event(ev)) — and
_serial_from_event was a stub that always returned None,
falling back to "UNKNOWN".
Effect on the user's prod server: 3,039 events forwarded across
24 distinct units, ALL inserted under serial='UNKNOWN'. The
on-disk waveform store + sidecars + HDF5s were fine, but the
SFM webapp's /db/units only showed the two original manually-
uploaded serials because every forwarded row had its serial
column zeroed to UNKNOWN.
Fix:
- WaveformStore.save_imported_bw() now surfaces the decoded
serial on the returned `rec` dict (rec["serial"]).
- The import endpoint uses rec["serial"] as the authoritative
fallback when the operator hasn't supplied a serial_hint query
parameter. Order of precedence:
query string `serial` → rec["serial"] → _serial_from_event(ev) → "UNKNOWN"
- Response payload now includes `serial` per file so the watcher
log lines (or any future caller) can see which unit each event
was attributed to.
Recovery for existing DB rows:
scripts/repair_unknown_serials.py walks the events table looking
for rows with serial='UNKNOWN' and re-attributes each one to the
serial decoded from blastware_filename. Updates the row in place
unless the target (serial, timestamp) already has a row, in which
case the UNKNOWN duplicate is deleted. Idempotent. Default
dry-run; pass --apply to commit.
Verified on the user's actual DB (dry-run):
UNKNOWN rows scanned: 3039
Updated to real serial: 2602
Deleted (duplicate of an
already-correct row): 437
Unresolved (bad filename): 0
After running the repair, /db/units will show all 24 units
correctly populated.
### Added
- **Layered event storage architecture.** Each event now lands as four
files in the per-serial waveform store, each with a clear role:
- `<filename>` — the Blastware-readable binary (BW file). Untouched.
- `<filename>.a5.pkl` — the raw 5A frames (regenerative source).
- `<filename>.h5` — clean per-channel waveform arrays in physical
units (in/s for geo, psi for mic) plus event metadata (HDF5 with
gzip compression). This is the canonical format for downstream
analysis tools.
- `<filename>.sfm.json` — the modern review/metadata sidecar (peaks,
project, source provenance, review state, extensions).
SQLite (`seismo_relay.db`) is the searchable index over all four.
- **Plot-ready waveform JSON (`sfm.plot.v1`).** The `/device/event/{idx}/waveform`
and `/db/events/{id}/waveform.json` endpoints now return samples in
physical units with explicit time-axis metadata, peak markers, and
per-channel unit hints — no more guessing the ADC-to-velocity scale
client-side. The webapp waveform viewer was rewritten to consume
this shape.
- **In-app waveform viewer accuracy fix.** The standalone SFM webapp
viewer was scaling geophone amplitudes by `geoAdcScale / 32767`
(≈ 6.206 / 32767), where `geoAdcScale = 6.206053` is the device's
*in/s per V* hardware constant — not the ADC-counts-to-velocity
factor. This silently scaled every plot ~38% too low for Normal-range
geophones (the correct full-scale is 10.0 in/s, or 1.25 in/s for
Sensitive). Conversion is now done server-side using the geo_range
from compliance config; the client just plots.
- New `sfm/event_hdf5.py` module: `write_event_hdf5()`,
`read_event_hdf5()`, plus a plot-JSON helper.
- Backfill script extended to also emit `.h5` for existing events.
### Dependencies
- Added `h5py>=3.10` and `numpy>=1.24` for the HDF5 storage layer.
- Added `python-multipart>=0.0.7` (required by FastAPI for the
`/db/import/blastware_file` endpoint introduced in this release).
serversdown