fix(backfill): regenerate IDFH .h5 + merge binary mic_pspl_psi onto bridge

Two gaps in backfill_thor_events.py that left old Thor events showing
stale charts after a v0.21.1 backfill pass:
1. IDFH events were skipped from .h5 regeneration (the "have decoded
   samples" gate was IDFW-only).  Histograms kept their pre-v0.21.1
   .h5 — written from raw_samples = None, which the renderer turned
   into a near-empty bar chart, or for older events the dB(L)-as-pseudo-
   psi mic scale that produced "107.7 psi" peaks (atomic-bomb level
   instead of footstep level).  Fix: synthesise the same 1-sample-per-
   interval array save_imported_idf v0.21.1 uses (peak ADC count per
   channel per interval) so the renderer's bar-chart grouping has
   data to work with.
2. The IDFW h5 path didn't merge binary_peaks.mic_pspl_psi onto the
   IdfEvent before to_minimateplus_event().  The live save_imported_idf
   does this merge — without it, IdfEvent.from_report() only sees the
   .txt's dB(L) value, the bridge falls back to the dBL→psi formula
   (instead of the binary-accurate 2.14e-6 psi/count value), and the
   h5 writer's per-count mic factor lands on a less-correct value.
   Fix: same merge the live ingest does (lift res.event.peaks.mic_pspl_psi
   onto idf_event.peaks before the bridge call).
Verified against UM6047_20250804190047.IDFH (250-interval prod
histogram): 250 intervals decode, mic_pspl_psi = 2.78e-5 (was being
treated as dB(L)=107.7 in the old h5).
Operator: re-run after deploy.  `docker compose exec sfm python
scripts/backfill_thor_events.py` is idempotent — the existing version
check still skips events already at the new TOOL_VERSION, and review
state + captured_at are preserved on the second pass.

CHANGELOG.md

@@ -8,6 +8,63 @@ All notable changes to seismo-relay are documented here.
 
 ---
 
+## v0.21.1 — 2026-06-01
+
+Bug fixes against v0.21.0 surfaced after the first prod redeploy.  Three
+production-visible symptoms — blank waveform charts on most Thor events,
+blank histogram charts on all Thor events, and a mic chart that
+auto-scaled against a dB(L) value treated as psi — all root-caused and
+fixed.
+
+### Fixed
+
+- **Dynamic IDFW body offset.**  The v0.21.0 codec hardcoded the body
+  at file offset `0x0f1f` based on the example corpus, but only ~52%
+  of production IDFW events use that offset; the rest sit at offsets
+  from `0x1033` up to `0x3082` depending on header padding.  At
+  `0x0f1f` the codec would find a coincidentally-matching `00 02 00`
+  magic, read the 2-byte Tran preamble, and return empty V/L/M
+  arrays — producing near-empty .h5 files and blank charts.
+  `micromate.idf_file._find_waveform_body_offset()` now scans every
+  `00 02 00` magic position past `0x0E00`, trial-decodes each one,
+  and picks the offset with the most samples.  Validated across 483
+  prod IDFW files: 0 preamble-only events (was ~50%), 355/483 fully
+  decode, 126/483 partial (BW codec walker-stops-early on loud
+  events — pre-existing limitation, samples reached are correct).
+
+- **IDFH histograms now render bar charts.**  Histograms previously
+  skipped the .h5 write because there are no per-sample arrays, but
+  the renderer drives the per-interval bar chart from .h5 channel
+  data + `bw_report.histogram.n_intervals`.  `save_imported_idf` now
+  synthesizes a 1-sample-per-interval array from the decoded
+  `IdfhInterval` peak counts and writes an .h5 so the existing
+  renderer works unchanged — each "sample" is the per-interval peak
+  ADC count, so the writer's `count × geo_fs/32768` conversion
+  yields the right bar height.
+
+- **Mic chart scaling on Thor events.**  `PeakValues.micl` (consumed
+  by the h5 writer's per-count mic scale factor) expects psi, but
+  the Thor bridge was stuffing the dB(L) value (~99.4) into it,
+  producing a per-count factor 5+ orders of magnitude too large and
+  a flat-looking mic chart.  Fixed by adding `IdfPeaks.mic_pspl_psi`
+  alongside `mic_pspl_dbl`; `read_idf_file()` computes it from
+  binary mic counts (`max(|MicL|) × 2.14e-6 psi/count`) for both
+  IDFW and IDFH paths; `save_imported_idf` merges it onto the typed
+  event after `IdfEvent.from_report`; the bridge feeds psi to
+  `PeakValues.micl` with a dB(L)→psi formula fallback when only the
+  dB(L) value is available.  dB(L) for the report header still
+  flows through `bw_report.mic.pspl_dbl` unchanged.
+
+### Operator
+
+After deploy, run `python scripts/backfill_thor_events.py` to refresh
+every existing Thor event's sidecar + .h5 with the corrected codec
+output.  The script auto-skips events already at the current
+`TOOL_VERSION`, so the bump from `0.21.0` → `0.21.1` is what triggers
+the refresh.
+
+---
+
 ## v0.21.0 — 2026-05-29
 
 The "Thor / Series IV codec" release.  Two big pieces landed: (1) the IDF binary codec actually decodes now, both IDFW and IDFH, and (2) a Thor→BW adapter lets Thor events flow through the existing Series III Event Report PDF pipeline.  Combined effect: a Thor event ingested via `/db/import/idf_file` now lands in the DB with the same fidelity as a Blastware event, gets a per-event PDF on demand, and renders in Terra-View's modal chart with the same plotting code as a BW event.

micromate/idf_file.py

@@ -62,12 +62,23 @@ _THOR_PREFIX = b"\x00\x12\x01\x00\x00\x00"
 _BW_STRAY_PREFIX = b"\x10\x00\x01\x80\x00\x00"
 _INSTANTEL_TAG = b"Instantel"
 
-# Constant body offset for sig-A IDFW files (verified across 151/154 corpus
+# Most common body offset for sig-A IDFW files (~50% of prod events;
-# files in tests/fixtures/THORDATA_example).  The body is the segment-rotated
+# 151/154 in the original tests/fixtures/THORDATA_example corpus).  The
-# block stream consumed by decode_waveform_v2; bytes [0:3] are the magic
+# body is the segment-rotated block stream consumed by decode_waveform_v2;
-# ``00 02 00`` preamble.
+# bytes [0:3] are the magic ``00 02 00`` preamble.  Production events
+# routinely use other offsets — see :func:`_find_waveform_body_offset`
+# for the dynamic scan.  This constant survives only as the priority hint.
 _BODY_START_SIG_A = 0x0F1F
 
+# Magic bytes that mark a candidate waveform-body preamble.
+_BODY_MAGIC = b"\x00\x02\x00"
+
+# Where to start looking for body candidates inside the file.  Skip the
+# fixed-header region where the same magic legitimately appears inside
+# channel-test records and the compliance block (offsets 0x015d, 0x091c,
+# 0x0ae2, 0x0d30 in observed events).
+_BODY_SCAN_FLOOR = 0x0E00
+
 # Geophone count → in/s, derived from sidecar ground truth: the smallest
 # non-zero sample in 1,014-file corpus is 0.0003 in/s.
 _GEO_LSB_IPS = 0.0003
@@ -179,17 +190,65 @@ def extract_binary_metadata(buf: bytes) -> IdfBinaryMetadata:
 # ─── Sample decoder + unit conversion ───────────────────────────────────────
 
 
+def _find_waveform_body_offset(buf: bytes) -> Optional[int]:
+    """Pick the file offset of the waveform body by trial-decoding every
+    ``00 02 00`` magic position past the fixed-header region.
+
+    The body's location isn't fixed across all sig-A IDFW files — about
+    half the production events use ``0x0f1f``, but the rest have offsets
+    that shift based on header padding / channel-config layout.  We
+    auto-detect by:
+
+      1. Find every ``00 02 00`` occurrence past ``_BODY_SCAN_FLOOR``.
+      2. Try ``decode_waveform_v2()`` on each candidate.
+      3. Pick the offset whose decoded sample count is largest.
+
+    Returns the offset, or ``None`` if no candidate yielded more than
+    the trivial 2-sample preamble (= "no real body found").
+
+    Costs ~2-8 trial decodes per file; in practice the first candidate
+    past 0x0e00 is usually the right one.
+    """
+    if len(buf) < _BODY_SCAN_FLOOR + 8:
+        return None
+    best: Optional[tuple[int, int]] = None   # (total_samples, offset)
+    i = _BODY_SCAN_FLOOR
+    while True:
+        j = buf.find(_BODY_MAGIC, i)
+        if j < 0:
+            break
+        i = j + 1
+        try:
+            decoded = decode_waveform_v2(buf[j:])
+        except Exception:
+            continue
+        if not decoded:
+            continue
+        total = sum(len(v) for v in decoded.values())
+        # A "real" body has more than just the 2-sample preamble.
+        if total <= 2:
+            continue
+        if best is None or total > best[0]:
+            best = (total, j)
+    return best[1] if best else None
+
+
 def _decode_waveform_samples(buf: bytes) -> Optional[dict]:
-    """Decode samples from the sig-A body starting at file offset 0x0f1f.
+    """Decode samples from the sig-A waveform body.
 
     Returns the raw decoder counts dict — geo LSB = 0.0003 in/s, mic in
     its own count unit (see :func:`mic_count_to_psi`).  Returns None if
-    decoding fails.
+    no usable body is found.
+
+    Uses :func:`_find_waveform_body_offset` to locate the body — the
+    file-offset varies across events (~50% sit at the canonical
+    ``0x0f1f`` but the rest don't), so the previous hardcoded constant
+    silently produced 2-sample preamble-only output for half the corpus.
     """
-    if len(buf) < _BODY_START_SIG_A + 8:
+    off = _find_waveform_body_offset(buf)
+    if off is None:
         return None
-    body = buf[_BODY_START_SIG_A:]
+    return decode_waveform_v2(buf[off:])
-    return decode_waveform_v2(body)
 
 
 def geo_count_to_ips(count: int) -> float:
@@ -379,6 +438,10 @@ def read_idf_file(
         peak_tran = max((iv.peak_ips("Tran") for iv in intervals), default=0.0)
         peak_vert = max((iv.peak_ips("Vert") for iv in intervals), default=0.0)
         peak_long = max((iv.peak_ips("Long") for iv in intervals), default=0.0)
+        # Mic peak in psi — Thor stores per-interval mic ADC counts in the
+        # binary; convert the max count to psi via the per-count factor.
+        mic_peak_count = max((iv.peak_count("MicL") for iv in intervals), default=0)
+        mic_peak_psi = mic_count_to_psi(mic_peak_count) if mic_peak_count else None
         rep = IdfReport(
             serial_number=md.serial,
             event_type="Full Histogram",
@@ -392,7 +455,8 @@ def read_idf_file(
             vertical_ips=peak_vert,
             longitudinal_ips=peak_long,
             peak_vector_sum_ips=None,
-            mic_pspl_dbl=None,
+            mic_pspl_dbl=None,         # IDFH binary doesn't carry the dB(L) value
+            mic_pspl_psi=mic_peak_psi,
         )
         event = IdfEvent(
             serial=md.serial or "UNKNOWN",
@@ -430,6 +494,11 @@ def read_idf_file(
         arr = decoded.get(ch, [])
         return geo_count_to_ips(max((abs(v) for v in arr), default=0))
 
+    # Mic peak psi from binary: max absolute MicL ADC count × 2.14e-6 psi/count.
+    mic_arr = decoded.get("MicL", [])
+    mic_peak_count = max((abs(v) for v in mic_arr), default=0)
+    mic_peak_psi = mic_count_to_psi(mic_peak_count) if mic_peak_count else None
+
     peaks = IdfPeaks(
         transverse_ips=_peak_ips("Tran"),
         vertical_ips=_peak_ips("Vert"),
@@ -437,7 +506,9 @@ def read_idf_file(
         # PVS requires aligned per-sample √(T²+V²+L²); leave None — the
         # sidecar carries it and the bridge picks it up if present.
         peak_vector_sum_ips=None,
-        mic_pspl_dbl=None,
+        mic_pspl_dbl=None,             # binary IDFW doesn't carry the dB(L) value;
+                                       # sidecar .txt fills it via IdfReport.from_dict
+        mic_pspl_psi=mic_peak_psi,
     )
 
     event = IdfEvent(

micromate/models.py

@@ -159,12 +159,23 @@ class IdfReport:
 
 @dataclass
 class IdfPeaks:
-    """Geophone + mic peak values for one Thor event.  Native Thor units."""
+    """Geophone + mic peak values for one Thor event.  Native Thor units.
+
+    Thor stores the mic peak in two parallel forms — ``mic_pspl_dbl`` is
+    what the sidecar's top-level ``MicPSPL`` header field carries (dB(L)),
+    used in the report header.  ``mic_pspl_psi`` is the psi value derived
+    either from the IDFW sample table / IDFH interval column 9, or from
+    the binary mic counts (~2.14e-6 psi/count).  Needed because the
+    BW-shaped ``PeakValues.micl`` consumed by ``event_hdf5.write_event_hdf5``
+    expects psi — feeding it dB(L) makes the h5 mic-chart scale factor
+    blow up.
+    """
     transverse_ips:    Optional[float] = None    # in/s
     vertical_ips:      Optional[float] = None    # in/s
     longitudinal_ips:  Optional[float] = None    # in/s
     peak_vector_sum_ips: Optional[float] = None  # in/s
     mic_pspl_dbl:      Optional[float] = None    # dB(L)
+    mic_pspl_psi:      Optional[float] = None    # psi
 
 
 @dataclass
@@ -324,10 +335,14 @@ class IdfEvent:
         machinery without those code paths needing to know about Thor.
 
         Caveats of the bridge:
-          - ``mic_ppv`` on the produced Event carries Thor's dB(L) value
+          - ``PeakValues.micl`` carries the mic peak in **psi** (matching
-            verbatim — the UI distinguishes via the ``device_family``
+            BW's convention) — set from :attr:`IdfPeaks.mic_pspl_psi`,
-            column (Phase 1).  Don't run the BW psi→dBL converter on
+            with a dB(L)→psi fallback when only the dB(L) value is
-            Series IV rows.
+            available.  This is what the h5 writer's mic-scale-factor
+            logic needs.  The dB(L) value still flows through
+            ``bw_report.mic.pspl_dbl`` (set by the
+            ``idf_to_bw_report`` adapter) and the renderer reads it
+            from there for the report header.
           - Many Thor-specific fields (Peak Acceleration / Displacement,
             sensor self-check, calibration) don't have a slot in
             ``Event``.  The full IdfReport is preserved on the
@@ -349,11 +364,17 @@ class IdfEvent:
             minute=self.timestamp.minute,
             second=self.timestamp.second,
         )
+        # Resolve mic peak as psi.  Priority: binary-derived mic_pspl_psi
+        # (set by read_idf_file) > dB(L)→psi fallback via standard formula
+        # (psi = 2.9e-9 × 10^(dBL/20)) > None.
+        mic_psi = self.peaks.mic_pspl_psi
+        if mic_psi is None and self.peaks.mic_pspl_dbl is not None:
+            mic_psi = 2.9e-9 * (10.0 ** (self.peaks.mic_pspl_dbl / 20.0))
         pv = PeakValues(
             tran=self.peaks.transverse_ips,
             vert=self.peaks.vertical_ips,
             long=self.peaks.longitudinal_ips,
-            micl=self.peaks.mic_pspl_dbl,   # dB(L) — see caveat above
+            micl=mic_psi,   # psi, matching BW's convention (h5 scaling depends on this)
             peak_vector_sum=self.peaks.peak_vector_sum_ips,
         )
         pi = ProjectInfo(

minimateplus/event_file_io.py

@@ -49,7 +49,7 @@ SIDECAR_KIND   = "sfm.event"
 # bumped without a `pip install` re-run — leading to confusing stale
 # version stamps in sidecars.  Bump this constant and CHANGELOG.md
 # together at release time.
-TOOL_VERSION = "0.21.0"
+TOOL_VERSION = "0.21.1"
 
 try:
     # Best-effort: prefer the installed metadata when it's NEWER than the

pyproject.toml

@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
 
 [project]
 name = "seismo-relay"
-version = "0.21.0"
+version = "0.21.1"
 description = "Python client and REST server for MiniMate Plus seismographs"
 requires-python = ">=3.10"
 dependencies = [

scripts/backfill_thor_events.py

@@ -0,0 +1,331 @@
+"""
+scripts/backfill_thor_events.py — re-process existing Thor (Series IV)
+events so their sidecars carry the bw_report block produced by
+``micromate.idf_to_bw_report.build_bw_report_from_idf`` + their .h5
+clean-waveform files for IDFW events.
+
+Why this exists
+───────────────
+
+Thor events ingested before v0.21.0 (or during the v0.21.0 ingest bug
+window fixed in commit bee1185) have sidecars with only
+``extensions.idf_report`` — no ``bw_report`` block.  Without
+``bw_report``, the SFM PDF renderer falls back to DB-only fields
+(misses sensor-self-check, full per-channel breakdown, mic dB(L)),
+and the modal chart 404s on ``/waveform.json`` for IDFW events
+because no .h5 was written when the codec failed at ingest.
+
+Re-forwarding from thor-watcher would also fix this, but that requires
+operator coordination on every watcher machine and uses bandwidth this
+script doesn't.
+
+What this does
+──────────────
+
+Walks ``<store>/<serial>/<filename>`` for ``.IDFW`` / ``.IDFH`` files
+and, for each one:
+
+  1. Reads the existing sidecar (preserving review state + captured_at).
+  2. Re-runs ``micromate.idf_file.read_idf_file()`` on the binary
+     bytes — passing ``data=`` so the codec doesn't try to read from
+     a path it doesn't know.
+  3. Pulls ``extensions.idf_report`` (the raw parsed Thor dict the
+     v0.18.0+ ingest path already stashed) and runs the v0.21.0
+     ``build_bw_report_from_idf`` adapter against it.
+  4. Writes the refreshed sidecar with the new ``bw_report``,
+     bumped ``source.tool_version``, but preserved ``review`` block
+     + the original ``captured_at`` timestamp.
+  5. Regenerates the .h5 waveform file via the existing
+     ``event_hdf5`` writer.  For IDFW that's the decoded per-sample
+     stream; for IDFH it's a 1-sample-per-interval synthesised array
+     (peak ADC count per channel) so the renderer's bar-chart code
+     has data to group on.  Mic peak psi from the binary is merged
+     onto the IdfEvent before the bridge so the h5 writer's per-count
+     mic scale factor lands on a sensible value (without this the
+     mic chart on Thor events plots dB(L)-as-pseudo-psi and shows
+     bomb-level numbers).
+
+Idempotent.  Re-running it after a parser/adapter change just
+re-writes sidecars — no DB writes, no thor-watcher coordination.
+
+Usage
+─────
+
+    python scripts/backfill_thor_events.py [--store-root PATH]
+                                           [--dry-run]
+                                           [--skip-hdf5]
+                                           [--force]
+                                           [-v]
+
+By default, refreshes any Thor event whose sidecar is missing
+``bw_report`` OR whose ``source.tool_version`` is older than the
+current ``TOOL_VERSION``.  ``--force`` refreshes every Thor event
+regardless.
+"""
+
+from __future__ import annotations
+
+import argparse
+import logging
+import sys
+from pathlib import Path
+
+# Allow running from the repo root without installation.
+sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
+
+from minimateplus import event_file_io
+from sfm.waveform_store import WaveformStore
+
+log = logging.getLogger("backfill_thor_events")
+
+
+def _is_thor_event(path: Path) -> bool:
+    if not path.is_file():
+        return False
+    if path.name.endswith((".sfm.json", ".h5", "_ASCII.TXT")):
+        return False
+    return path.suffix.upper() in (".IDFW", ".IDFH")
+
+
+def _vtuple(s: str) -> tuple:
+    try:
+        return tuple(int(p) for p in str(s).split(".")[:3])
+    except Exception:
+        return (0, 0, 0)
+
+
+def main(argv=None) -> int:
+    p = argparse.ArgumentParser(description=__doc__)
+    p.add_argument(
+        "--db-path",
+        default=str(Path(__file__).resolve().parent.parent / "bridges" / "captures" / "seismo_relay.db"),
+        help="Used only to derive the default --store-root.",
+    )
+    p.add_argument("--store-root", default=None)
+    p.add_argument("--dry-run", action="store_true")
+    p.add_argument("--skip-hdf5", action="store_true",
+                   help="Don't regenerate .h5 files for IDFW events.")
+    p.add_argument("--force", action="store_true",
+                   help="Refresh every Thor event, not just ones with stale or missing bw_report.")
+    p.add_argument("-v", "--verbose", action="store_true")
+    args = p.parse_args(argv)
+
+    logging.basicConfig(
+        level=logging.DEBUG if args.verbose else logging.INFO,
+        format="%(asctime)s  %(levelname)-7s  %(name)s  %(message)s",
+        datefmt="%H:%M:%S",
+    )
+
+    db_path = Path(args.db_path).expanduser().resolve()
+    store_root = (
+        Path(args.store_root).expanduser().resolve()
+        if args.store_root else db_path.parent / "waveforms"
+    )
+    if not store_root.exists():
+        log.error("store root not found: %s", store_root)
+        return 1
+    store = WaveformStore(store_root)
+    log.info("store root: %s", store_root)
+    log.info("current TOOL_VERSION: %s", event_file_io.TOOL_VERSION)
+
+    refreshed = skipped = errors = h5_written = 0
+
+    # Lazy imports so any one of these failing produces a useful error
+    # message rather than crashing module-load.
+    from micromate.idf_file import read_idf_file
+    from micromate.idf_to_bw_report import build_bw_report_from_idf
+
+    for serial_dir in sorted(p for p in store_root.iterdir() if p.is_dir()):
+        serial = serial_dir.name
+        for path in sorted(serial_dir.iterdir()):
+            if not _is_thor_event(path):
+                continue
+
+            sidecar_path = store.sidecar_path_for(serial, path.name)
+            if not sidecar_path.exists():
+                log.debug("%s: no sidecar — skipping (this is a binary without ingest history)",
+                          path.name)
+                skipped += 1
+                continue
+
+            try:
+                existing = event_file_io.read_sidecar(sidecar_path)
+            except Exception as exc:
+                log.warning("%s: failed to read sidecar — %s", path.name, exc)
+                errors += 1
+                continue
+
+            has_bw_report = bool(existing.get("bw_report"))
+            existing_version = (existing.get("source") or {}).get("tool_version", "")
+            up_to_date = (
+                has_bw_report
+                and _vtuple(existing_version) >= _vtuple(event_file_io.TOOL_VERSION)
+            )
+            if up_to_date and not args.force:
+                skipped += 1
+                continue
+
+            # Re-decode the binary.  Catch + log; continue with .txt-only
+            # data if it fails (matches the live ingest path's behavior).
+            idf_samples = None
+            idf_intervals = None
+            binary_md = None
+            is_histogram = path.suffix.upper() == ".IDFH"
+            try:
+                binary_bytes = path.read_bytes()
+                res = read_idf_file(path, data=binary_bytes)
+                idf_samples = res.samples or None
+                idf_intervals = res.intervals
+                binary_md = res.binary_metadata
+                is_histogram = res.intervals is not None
+            except NotImplementedError:
+                # sig-B / Blastware-stray binary; no samples but adapter
+                # can still produce a bw_report from extensions.idf_report.
+                log.debug("%s: binary codec NotImplementedError (sig-B / BW-stray); proceeding from sidecar's idf_report only", path.name)
+            except Exception as exc:
+                log.warning("%s: binary decode failed — %s; proceeding from sidecar's idf_report only", path.name, exc)
+
+            # Run the adapter.  Pull report_dict from
+            # extensions.idf_report (the v0.18.0+ ingest preserved it).
+            report_dict = (existing.get("extensions") or {}).get("idf_report") or {}
+            if not report_dict and binary_md is None:
+                log.debug("%s: no idf_report in sidecar AND no binary metadata — nothing to project", path.name)
+                skipped += 1
+                continue
+
+            try:
+                bw_report = build_bw_report_from_idf(
+                    report_dict, binary_md=binary_md,
+                    intervals=idf_intervals, is_histogram=is_histogram,
+                )
+            except Exception as exc:
+                log.warning("%s: adapter failed — %s", path.name, exc)
+                errors += 1
+                continue
+
+            # Build the new sidecar by overlaying refreshed fields onto
+            # the existing one — preserves review, captured_at, blastware
+            # block, source.kind, etc.
+            new_sidecar = dict(existing)  # shallow copy
+            new_sidecar["bw_report"] = bw_report
+            src = dict(new_sidecar.get("source") or {})
+            src["tool_version"] = event_file_io.TOOL_VERSION
+            new_sidecar["source"] = src
+
+            # Preserve histogram intervals if the binary decoded them
+            # (improves over the original ingest if that one ran before
+            # the bee1185 codec fix).
+            if idf_intervals is not None:
+                ext = dict(new_sidecar.get("extensions") or {})
+                ext["idf_intervals"] = [
+                    {
+                        "offset":     iv.offset,
+                        "tran_peak":  iv.peak_count("Tran"),
+                        "tran_halfp": iv.tran_halfp,
+                        "tran_freq":  iv.freq_hz("Tran"),
+                        "vert_peak":  iv.peak_count("Vert"),
+                        "vert_halfp": iv.vert_halfp,
+                        "vert_freq":  iv.freq_hz("Vert"),
+                        "long_peak":  iv.peak_count("Long"),
+                        "long_halfp": iv.long_halfp,
+                        "long_freq":  iv.freq_hz("Long"),
+                        "mic_peak":   iv.peak_count("MicL"),
+                        "mic_halfp":  iv.micl_halfp,
+                        "mic_freq":   iv.freq_hz("MicL"),
+                    }
+                    for iv in idf_intervals
+                ]
+                new_sidecar["extensions"] = ext
+
+            if args.dry_run:
+                will_write_h5 = (idf_samples or idf_intervals) and not args.skip_hdf5
+                log.info("[DRY] %s/%s — would refresh sidecar (bw_report=%s, h5=%s)",
+                         serial, path.name,
+                         "wrote" if not has_bw_report else "refreshed",
+                         "would write" if will_write_h5 else "skipped")
+            else:
+                event_file_io.write_sidecar(sidecar_path, new_sidecar)
+                log.info("%s/%s — sidecar refreshed (bw_report=%s, intervals=%d)",
+                         serial, path.name,
+                         "added" if not has_bw_report else "refreshed",
+                         len(idf_intervals) if idf_intervals else 0)
+            refreshed += 1
+
+            # Regenerate .h5 by replaying the same IdfEvent → Event bridge
+            # save_imported_idf uses.  For IDFW we write the decoded per-
+            # sample arrays.  For IDFH we synthesise a 1-sample-per-interval
+            # array (peak ADC count per channel per interval) so the
+            # renderer's bar-chart code has something to group on.
+            # Pre-condition: either real samples (IDFW) or decoded intervals
+            # (IDFH).  Skip otherwise.
+            have_data = bool(idf_samples) or bool(idf_intervals)
+            if have_data and not args.skip_hdf5:
+                from sfm import event_hdf5
+                hdf5_path = store.hdf5_path_for(serial, path.name)
+                if args.dry_run:
+                    log.debug("[DRY] would write %s", hdf5_path.name)
+                else:
+                    try:
+                        from micromate import IdfEvent
+                        from minimateplus.event_file_io import file_sha256
+                        idf_event = IdfEvent.from_report(report_dict, path.name)
+
+                        # Merge the binary-derived mic peak psi (only the
+                        # binary path knows the proper psi value; the .txt
+                        # carries dB(L)).  Without this, the h5 writer's
+                        # per-count mic factor is computed against the
+                        # dB(L) value-as-pseudo-psi and the mic chart
+                        # scales wildly.
+                        if (binary_md is not None and res is not None
+                                and res.event.peaks.mic_pspl_psi is not None):
+                            idf_event.peaks.mic_pspl_psi = res.event.peaks.mic_pspl_psi
+
+                        sha256 = file_sha256(path)
+                        waveform_key = bytes.fromhex(sha256)[:16]
+                        ev = idf_event.to_minimateplus_event(waveform_key)
+
+                        if is_histogram and idf_intervals:
+                            # 1 sample per interval per channel — same
+                            # synthesis save_imported_idf uses.  The h5
+                            # writer's count×geo_fs/32768 conversion turns
+                            # each peak-ADC-count into the bar's physical
+                            # value.
+                            ev.raw_samples = {
+                                "Tran": [iv.peak_count("Tran") for iv in idf_intervals],
+                                "Vert": [iv.peak_count("Vert") for iv in idf_intervals],
+                                "Long": [iv.peak_count("Long") for iv in idf_intervals],
+                                "MicL": [iv.peak_count("MicL") for iv in idf_intervals],
+                            }
+                            ev.total_samples = ev.total_samples or len(idf_intervals)
+                        elif idf_samples:
+                            ev.raw_samples = idf_samples
+                            n_samp = max(
+                                (len(idf_samples.get(ch, []))
+                                 for ch in ("Tran", "Vert", "Long", "MicL")),
+                                default=0,
+                            )
+                            ev.total_samples = ev.total_samples or n_samp
+
+                        event_hdf5.write_event_hdf5(
+                            hdf5_path, ev,
+                            serial=serial,
+                            geo_range="normal",
+                            source_kind="idf-import",
+                            tool_version=event_file_io.TOOL_VERSION,
+                        )
+                        h5_written += 1
+                        log.debug("%s/%s — .h5 written (%s)",
+                                  serial, path.name,
+                                  f"{len(idf_intervals)} intervals" if is_histogram
+                                  else f"{sum(len(v) for v in (idf_samples or {}).values())} samples")
+                    except Exception as exc:
+                        log.warning("%s/%s — .h5 write failed: %s",
+                                    serial, path.name, exc)
+
+    log.info("Done.  refreshed=%d  skipped=%d  errors=%d  h5_written=%d",
+             refreshed, skipped, errors, h5_written)
+    return 0 if errors == 0 else 2
+
+
+if __name__ == "__main__":
+    sys.exit(main())

scripts/test_thor_render.py

@@ -0,0 +1,91 @@
+"""Re-ingest a prod IDFW + IDFH via the patched save_imported_idf and
+render both PDFs to confirm charts have data."""
+from __future__ import annotations
+import sys
+import json
+import datetime
+import tempfile
+from pathlib import Path
+
+sys.path.insert(0, str(Path(__file__).resolve().parents[1]))
+
+from sfm.waveform_store import WaveformStore
+from sfm import report_pdf
+import h5py
+
+
+class FakeDb:
+    def __init__(self, event):
+        self.event = event
+    def get_event(self, _id):
+        return self.event
+
+
+def to_ts_iso(ts):
+    if ts is None:
+        return None
+    try:
+        return datetime.datetime(ts.year, ts.month, ts.day, ts.hour, ts.minute, ts.second).isoformat()
+    except Exception:
+        return None
+
+
+def render_case(idf_path: Path, serial: str, out_pdf: Path, h5_summary: bool = True):
+    with tempfile.TemporaryDirectory() as td:
+        store = WaveformStore(Path(td))
+        ev, rec = store.save_imported_idf(
+            idf_path.read_bytes(),
+            idf_path,
+            idf_report_text=None,    # production worst case: no .txt
+        )
+        print(f"=== {idf_path.name} ===")
+        print(f"  h5: {rec['hdf5_filename']}, sidecar: {rec['sidecar_filename']}")
+
+        h5p = Path(td) / serial / f"{idf_path.name}.h5"
+        if h5p.exists() and h5_summary:
+            with h5py.File(h5p) as h:
+                for ch in ("Tran", "Vert", "Long", "MicL"):
+                    ds = h.get(f"samples/{ch}")
+                    if ds is not None:
+                        n = ds.shape[0]
+                        mx = float(abs(ds[...]).max()) if n else 0
+                        print(f"  samples/{ch}: n={n}  max_abs={mx:.5f}")
+
+        record_type = "Histogram" if idf_path.suffix.upper() == ".IDFH" else "Waveform"
+        fake_row = {
+            "serial":              serial,
+            "blastware_filename":  rec["filename"],
+            "record_type":         record_type,
+            "timestamp":           to_ts_iso(ev.timestamp),
+            "sample_rate":         ev.sample_rate,
+            "project":             ev.project_info.project if ev.project_info else None,
+            "client":              ev.project_info.client if ev.project_info else None,
+            "operator":            ev.project_info.operator if ev.project_info else None,
+            "sensor_location":     ev.project_info.sensor_location if ev.project_info else None,
+            "created_at":          None,
+        }
+        rd = report_pdf.gather_report_data(FakeDb(fake_row), store, event_id="test-1")
+        print(f"  ReportData: channels={ {k: len(v) for k,v in rd.channels.items()} }")
+        if rd.is_histogram:
+            print(f"  histogram n_intervals={rd.histogram_n_intervals} interval_size={rd.histogram_interval_size}")
+        pdf = report_pdf.render_event_report_pdf(rd)
+        out_pdf.write_bytes(pdf)
+        print(f"  PDF: {out_pdf}  ({len(pdf)} bytes)")
+
+
+def main():
+    out_dir = Path("/tmp/thor_render_test"); out_dir.mkdir(exist_ok=True)
+    cases = [
+        # IDFW that decoded to preamble-only under the old codec
+        ("/home/serversdown/seismo-relay-prod-snap/waveforms/UM6047/UM6047_20250804154137.IDFW", "UM6047"),
+        # IDFW that worked under the old codec (validates no regression)
+        ("/home/serversdown/seismo-relay-prod-snap/waveforms/UM6047/UM6047_20250804104450.IDFW", "UM6047"),
+        # IDFH histogram
+        ("/home/serversdown/seismo-relay-prod-snap/waveforms/UM6047/UM6047_20250804190047.IDFH", "UM6047"),
+    ]
+    for path, serial in cases:
+        render_case(Path(path), serial, out_dir / f"{Path(path).name}.pdf")
+
+
+if __name__ == "__main__":
+    main()

sfm/report_pdf.py

@@ -638,14 +638,7 @@ def _draw_channel_stats_waveform(ax, rd: ReportData) -> None:
         ("Sensor Check",         "sensor_check",   ""),
     ]
     _draw_stats_table(ax, rd, rows_spec)
-    if rd.peak_vector_sum_ips is not None:
+    _draw_pvs_summary(ax, rd, n_data_rows=len(rows_spec))
-        line = f"Peak Vector Sum   {rd.peak_vector_sum_ips:.3f} in/s"
-        if rd.peak_vector_sum_time_s is not None:
-            line += f" At {rd.peak_vector_sum_time_s:.3f} sec."
-        ax.text(0.0, -0.08, line, fontsize=9, weight="bold",
-                ha="left", va="top", transform=ax.transAxes)
-        ax.text(0.0, -0.18, "NA: Not Applicable", fontsize=7, color="#888",
-                ha="left", va="top", transform=ax.transAxes)
 
 
 def _draw_channel_stats_histogram(ax, rd: ReportData) -> None:
@@ -663,20 +656,54 @@ def _draw_channel_stats_histogram(ax, rd: ReportData) -> None:
         ("Sensor Check", "sensor_check",    ""),
     ]
     _draw_stats_table(ax, rd, rows_spec)
-    if rd.peak_vector_sum_ips is not None:
+    _draw_pvs_summary(ax, rd, n_data_rows=len(rows_spec), histogram_when=True)
+
+
+def _draw_pvs_summary(
+    ax,
+    rd: ReportData,
+    *,
+    n_data_rows: int,
+    histogram_when: bool = False,
+) -> None:
+    """Render the Peak Vector Sum + 'NA: Not Applicable' caption below the
+    stats table.
+
+    Reads ``ax._stats_table_bottom`` (set by ``_draw_stats_table`` when
+    it pins the table via an explicit ``bbox``) so the PVS line lands
+    just below the table's known bottom edge instead of guessing at the
+    geometry.
+
+    Centered horizontally for visual balance (the previous left-aligned
+    x=0 landed under the label column, not the data, which looked off).
+    """
+    if rd.peak_vector_sum_ips is None:
+        return
+
     line = f"Peak Vector Sum   {rd.peak_vector_sum_ips:.3f} in/s"
-        # Histograms: "0.091 in/s on May 27, 2026 At 06:06:14"
+    if histogram_when and rd.peak_vector_sum_when_str:
-        # The when_str is "HH:MM:SS Month DD, YYYY" — reformat for BW match.
+        # Histogram absolute date+time.  when_str is "HH:MM:SS Month DD, YYYY";
-        if rd.peak_vector_sum_when_str:
+        # reformat to "<value> on <date> At <time>" to match BW.
         parts = rd.peak_vector_sum_when_str.split(" ", 1)
         if len(parts) == 2:
             line += f" on {parts[1]} At {parts[0]}"
         else:
             line += f" on {rd.peak_vector_sum_when_str}"
-        ax.text(0.0, -0.08, line, fontsize=9, weight="bold",
+    elif not histogram_when and rd.peak_vector_sum_time_s is not None:
-                ha="left", va="top", transform=ax.transAxes)
+        line += f" At {rd.peak_vector_sum_time_s:.3f} sec."
-        ax.text(0.0, -0.18, "NA: Not Applicable", fontsize=7, color="#888",
+
-                ha="left", va="top", transform=ax.transAxes)
+    # _draw_stats_table stashes the bbox bottom on the axes so we don't
+    # have to guess geometry.  Falls back to a conservative default if
+    # the bbox approach hasn't run.
+    table_bottom_y = getattr(ax, "_stats_table_bottom", -0.10)
+    pvs_y = table_bottom_y - 0.04   # small gap below the table border
+
+    # Centered for visual balance — looks intentional rather than offset.
+    # The original BW-replica had a "NA: Not Applicable" caption below
+    # this line; dropped because we use "—" for missing values and the
+    # legend was always squished against the PVS line.
+    ax.text(0.5, pvs_y, line, fontsize=9, weight="bold",
+            ha="center", va="top", transform=ax.transAxes)
 
 
 def _draw_stats_table(ax, rd: ReportData, rows_spec: list[tuple[str, str, str]]) -> None:
@@ -711,16 +738,28 @@ def _draw_stats_table(ax, rd: ReportData, rows_spec: list[tuple[str, str, str]])
             _cell(field_name, "Long"),
             unit,
         ])
+    # Pin the table's position+size via bbox so we know exactly where
+    # the bottom edge lands.  Lets _draw_pvs_summary place the PVS line
+    # just below the table without guessing at row heights.
+    #
+    # bbox = [x, y, width, height] in axes coords.  Header + data rows
+    # at row_h each; horizontal extent matches sum(colWidths).
+    n_rows = len(table_data)        # header + data rows
+    row_h  = 0.12                   # axes-fraction per row (fits fontsize=8)
+    table_height = n_rows * row_h
+    table_bottom = 1.0 - table_height
     tbl = ax.table(
-        cellText=table_data, loc="upper left",
+        cellText=table_data,
         colWidths=[0.28, 0.14, 0.14, 0.14, 0.10],
         cellLoc="left", edges="open",
+        bbox=[0.0, table_bottom, 0.80, table_height],
     )
     tbl.auto_set_font_size(False)
     tbl.set_fontsize(8)
-    tbl.scale(1, 1.4)
     for j in range(5):
         tbl[(0, j)].set_text_props(weight="bold", color="#555")
+    # Stash the bottom Y so _draw_pvs_summary can position itself below.
+    ax._stats_table_bottom = table_bottom
 
 
 def _channel_axis_color(ch: str) -> str:

sfm/waveform_store.py

@@ -568,6 +568,16 @@ class WaveformStore:
         # precedence over the filename timestamp inside from_report().
         idf_event = IdfEvent.from_report(report_dict, source_path.name)
 
+        # The binary mic peak (psi) isn't carried through from_report() —
+        # IdfReport.from_dict only sees the .txt's dB(L) value.  Pull the
+        # binary-derived ``mic_pspl_psi`` onto the typed IdfEvent so the
+        # downstream bridge can populate ``PeakValues.micl`` (psi-shaped)
+        # and the h5 writer's per-count mic factor lands at a sensible
+        # value.  Without this, the h5 mic chart auto-scales against the
+        # dB(L) value-as-pseudo-psi and renders ~flat.
+        if binary_peaks is not None and binary_peaks.mic_pspl_psi is not None:
+            idf_event.peaks.mic_pspl_psi = binary_peaks.mic_pspl_psi
+
         # Operator-supplied serial_hint wins over the binary's filename
         # prefix when both are present (e.g. callers passing a known-good
         # serial that overrides a misnamed export).
@@ -600,10 +610,28 @@ class WaveformStore:
             n_samples = max((len(idf_samples.get(ch, [])) for ch in ("Tran", "Vert", "Long", "MicL")), default=0)
             ev.total_samples = ev.total_samples or n_samples
 
-        # 7. Write the .h5 clean-waveform file when we actually have samples.
+        # For IDFH histograms there are no per-sample waveform arrays — the
-        # Histograms (IDFH) don't have waveform samples — skip h5 for those.
+        # device stores one peak ADC count per interval per channel.  Synthesise
+        # a 1-sample-per-interval array so the existing h5+renderer pipeline
+        # (which groups samples down to ``n_intervals`` bars via max-per-group)
+        # produces a non-blank histogram chart.  Each "sample" is the peak ADC
+        # count for that interval, so the h5 writer's ``count × geo_fs/32768``
+        # conversion yields the right physical value for the bar height.
+        if is_histogram and idf_intervals:
+            hist_samples = {
+                "Tran": [iv.peak_count("Tran") for iv in idf_intervals],
+                "Vert": [iv.peak_count("Vert") for iv in idf_intervals],
+                "Long": [iv.peak_count("Long") for iv in idf_intervals],
+                "MicL": [iv.peak_count("MicL") for iv in idf_intervals],
+            }
+            ev.raw_samples = hist_samples
+            ev.total_samples = ev.total_samples or len(idf_intervals)
+
+        # 7. Write the .h5 clean-waveform file when we have samples to write
+        # (either the IDFW per-sample stream, or the IDFH synthesised per-
+        # interval peak array).  The renderer treats both shapes the same way.
         hdf5_filename: Optional[str] = None
-        if idf_samples is not None and not is_histogram:
+        if ev.raw_samples:
             hdf5_path = self.hdf5_path_for(serial, filename)
             try:
                 event_hdf5.write_event_hdf5(