v0.12.6 #10
@@ -1096,7 +1096,7 @@ body) because writing a dial string may require DLE escaping for embedded contro
|
||||
|
||||
- **Database** — SQLite store for events + monitor log entries; dedup by key; queryable
|
||||
- **Histograms** — decode histogram-mode A5 data (noise floor tracking)
|
||||
- **Blastware-compatible file output** — .MLG and binary waveform file generation matching Blastware format (needed for interoperability with existing workflows)
|
||||
- **Blastware-compatible file output** — `write_n00()` and `write_mlg()` implemented (v0.12.3+). `write_n00` verified byte-perfect vs M529LIY6.N00. Extension mapping: `.N00`=single-shot, `.9T0`=continuous (confirmed); `.490`, `.5K0`, `.980`, `.ML0` observed but not decoded (likely encoding recording mode × sample rate at capture time — not determinable from file body alone). Filename stem algorithm confirmed 2026-04-21: `M<serial3><4-char-base36-stem><ext>` where stem = `floor((ts_local − 1985-01-01T00:00:00) / 1296)`, unit = 36² = 1296 s ≈ 21.6 min.
|
||||
- Compliance config encoder — build raw write payloads from a `ComplianceConfig` object
|
||||
- **Test Histogram recording mode (0x03) write via SFM** — confirmed working for Single Shot / Continuous / Histogram+Continuous; Histogram (0x03) needs a live test from a non-Histogram starting state (bare 0x03 in write vs BW's DLE-escaped `10 03`)
|
||||
- **Compliance write anchor-9 cleanup** — when changing recording_mode via SFM, the byte at anchor-9 is not explicitly managed. A spurious `0x10` may persist after Histogram→other mode transitions. Does not affect device operation but differs from BW's byte-perfect output.
|
||||
|
||||
@@ -105,6 +105,8 @@
|
||||
| 2026-04-11 | §14.6 | **RESOLVED — ACH Session Lifecycle is no longer "Future".** `bridges/ach_server.py` fully implements inbound ACH: POLL handshake, device info, event download. State tracked via `ach_state.json` (key-based, with `max_downloaded_key` for post-erase detection). `--clear-after-download` flag added for the standard delete-after-upload workflow. |
|
||||
| 2026-04-17 | §7.6.2, §14 | **RESOLVED — Float 6.206053 at channel_label+28 is the ADC-to-velocity scale factor.** Confirmed from Series III Interface Handbook §4.5 formula: `Range (×1) = 1.61133 V / Sensitivity (V/unit)`. For the standard Instantel geophone at Normal range (10.000 in/s): Sensitivity = 1.61133 / 10 = 0.161133 V/(in/s). The stored value is the **inverse sensitivity** = 1/0.161133 = **6.206053 (in/s)/V**. Cross-check: 1.61133 V × 6.206053 = 10.000 in/s ✅. The firmware uses it as: `PPV (in/s) = ADC_voltage (V) × 6.206053`. Value is identical on all Instantel standard geophones — it is a hardware/firmware constant, NOT a user-configurable setting. Do NOT write this field. Open question §14 item "Max Geo Range float 6.2061" is now **RESOLVED**. |
|
||||
| 2026-04-20 | §7.6.4 (NEW), §7.9, Appendix B | **CONFIRMED — Recording Mode byte location.** Three targeted captures (4-20-26) confirmed `recording_mode` at anchor−8 in both the E5 read payload and the BW write payload (6-byte anchor `\xbe\x80\x00\x00\x00\x00`). BW write payload and E5 read payload are **byte-identical** around the anchor region — Blastware round-trips the wire-encoded E5 bytes verbatim with only the target field modified. Anchor position varies by ±1 depending on whether recording_mode = 0x03 (Histogram), because E5 wire-encodes `0x03` as the inner DLE+ETX pair `\x10\x03` (2 bytes), which S3FrameParser preserves as two literal bytes in `compliance_raw`. Enum: `0x00`=Single Shot, `0x01`=Continuous, `0x03`=Histogram, `0x04`=Histogram+Continuous. `0x02` value not yet observed. The byte at anchor−9 is `0x00` for Single Shot / Continuous, and `0x10` for Histogram (DLE prefix from E5 encoding) and Histogram+Continuous (actual config byte). See §7.6.4 for full details. |
|
||||
| 2026-04-21 | Appendix D (NEW) | **NEW — Blastware .N00 and .MLG file formats fully decoded.** `minimateplus/blastware_file.py` implements `write_n00()` and `write_mlg()`. N00 file format confirmed: 22B header + 21B STRT record + variable body + 26B footer. Body reconstructed from A5 bulk waveform stream frames with per-frame skip amounts (probe=7+strt_pos+21, A5[1]=13, A5[2+]=12, terminator=11) and DLE strip rule (strip `0x10` before `{0x02,0x03,0x04}`, keep following byte). Footer extracted verbatim from terminator frame's last 26 bytes. Split-pair edge case: when `frame.data[-1]==0x10` and `chk_byte∈{0x02,0x03,0x04}`, reunite both bytes before stripping and always remove trailing chk_byte (`stripped[:-1]`) — chk_byte is checksum, not payload. STRT record must be copied verbatim from A5[0]; bytes [10:20] are device-specific and cannot be reconstructed from Event fields. `write_n00` verified byte-perfect against `M529LIY6.N00` from 4-3-26-multi_event capture. MLG format: 308B header + N×292B records; CRC algorithm unknown (write as 0x0000). |
|
||||
| 2026-04-21 | Appendix D §D.5 (NEW) | **NEW — Blastware filename stem encoding confirmed; extension taxonomy partially decoded.** Stem is a 4-character uppercase base-36 encoding of `floor((event_local_time − 1985-01-01T00:00:00) / 1296)`, where 1296 = 36² seconds ≈ 21.6 minutes per unit. Epoch = January 1, 1985 (Instantel founding year). Confirmed against 6 independent events (April 1–9, 2026): all 6 stems (LIY6, LJ31, LJ8V, LJDY×3) match exactly; epoch estimate within ±7 minutes of midnight across all samples. Third char is always `'0'`. Serial prefix = `"M"` + last 3 decimal digits of serial. Multiple events within the same 21.6-minute window share a stem; their extension distinguishes them. Extension taxonomy: `.N00`=single-shot (compliance_raw recording_mode=0x00), `.9T0`=continuous (recording_mode=0x01) confirmed. `.490`, `.5K0`, `.980`, `.ML0` observed but not decoded — binary analysis shows they are structurally identical to `.9T0` files in all metadata regions (the A5 body's session-start compliance config reflects the state at session start, not at per-event capture time). Extension likely encodes the capture-time recording mode × sample rate combination, but cannot be determined from file body alone without capture-time compliance data. **DLE-shift note for reading recording_mode from file body:** the 0x10 constant at logical anchor−7 gets stripped by `_strip_inner_frame_dles` when sample_rate_HI = 0x04 (1024 sps), shifting recording_mode from logical anchor−8 to file position anchor−7. For sample_rate ≠ 1024 (0x08 or 0x10 as HI byte), no stripping occurs and recording_mode remains at file[anchor−8]. |
|
||||
| 2026-04-21 | §7.6.2, §5.3 | **CORRECTED — compliance_raw contains wire-encoded bytes, NOT logical bytes.** S3FrameParser appends DLE+ETX inner-frame pairs as two literal bytes to the frame body. Any `0x03` values in the compliance config appear in `compliance_raw` as `\x10\x03` (two bytes), not as a single `0x03`. The previous claim "S3FrameParser handles this transparently so compliance_raw contains logical (destuffed) bytes" was wrong. Consequence: `compliance_raw` is the wire-encoded E5 payload; anchor-relative reads work correctly because the anchor position automatically accounts for any DLE-encoded bytes before it. For write-back, round-tripping `compliance_raw` verbatim sends the correct wire bytes to the device. **DLE ETX escaping in write frames:** Blastware escapes `0x03` bytes in write frame data as `\x10\x03` on wire; our `build_bw_write_frame` does not (writes data raw). Device is confirmed to accept raw writes for all tested modes — likely uses the offset/length field for write frame framing, not ETX scanning. |
|
||||
| 2026-04-20 | §7.6.2, §7.9, Appendix B | **CONFIRMED — Geophone maximum range / sensitivity selector byte location.** Two targeted captures (4-20-26, geo sensitivity folder): one at Normal 10.000 in/s, one at Sensitive 1.250 in/s. E5 read payload diff: exactly 3 bytes differ at channel_label+33 for Tran/Vert/Long. Values: `0x00`=Normal 10.000 in/s, `0x01`=Sensitive 1.250 in/s. Same offset applies to the SUB 71 write payload (which is the same 2126-byte E5-format buffer round-tripped verbatim). **`channel_label+20` reads `0x01` in ALL captures regardless of range setting — it is NOT this field.** Previous hypothesis (uint8 at Tran+20, 0x01=Normal) was WRONG. Stored as `geo_range` in `ComplianceConfig`. Encoded to all three geo channel blocks (Tran/Vert/Long) at label+33. |
|
||||
| 2026-04-20 | §5.1, §5.3, §7.12 (NEW) | **NEW — Auto Call Home config protocol confirmed from 4-20-26 call home settings captures.** SUB 0x2C (Call Home Config READ, response 0xD3, data offset 0x7C=124) and SUB 0x7E/0x7F (WRITE + CONFIRM, response 0x81/0x80) confirmed. Write payload = read payload (125 bytes) + `\x00\x00` (127 bytes total). **DLE-escaped ETX at raw[117:119]:** the device returns logical value 0x03 (num_retries=3) as `\x10\x03` on the wire — S3FrameParser preserves both bytes as two literals, causing a +1 byte shift for all subsequent fields. Write frame sends these bytes verbatim (device interprets `\x10\x03` as literal value 3). Field map confirmed from 10-frame BW TX diff. See §7.12 for full layout. |
|
||||
@@ -2245,6 +2247,223 @@ Semantic Interpretation <- settings, events, responses
|
||||
|
||||
---
|
||||
|
||||
---
|
||||
|
||||
## Appendix D — Blastware Binary File Formats (.N00 / .MLG)
|
||||
|
||||
> ✅ CONFIRMED 2026-04-21 — all fields verified by binary diff of reconstructed vs reference
|
||||
> files from the 4-3-26-multi_event capture (M529LIY6.N00, BE11529.MLG).
|
||||
|
||||
### D.1 Common File Header (22 bytes)
|
||||
|
||||
All Blastware files (regardless of type) share an 18-byte prefix followed by a 4-byte type tag.
|
||||
|
||||
| Offset | Length | Value | Description |
|
||||
|---|---|---|---|
|
||||
| 0x00 | 6 | `10 00 01 80 00 00` | Fixed prefix |
|
||||
| 0x06 | 10 | `Instantel\x00` | ASCII string |
|
||||
| 0x10 | 2 | `07 2c` | Fixed suffix |
|
||||
| 0x12 | 4 | varies | File type tag (see below) |
|
||||
|
||||
**Total header: 22 bytes.**
|
||||
|
||||
**Type tags:**
|
||||
|
||||
| Extension | Type tag | Description |
|
||||
|---|---|---|
|
||||
| `.N00` | `00 12 03 00` | Single-shot waveform event |
|
||||
| `.MLG` | `22 01 0e a0` | Monitor log |
|
||||
|
||||
Blastware identifies file type by extension, not by type tag alone.
|
||||
|
||||
### D.2 Timestamp Encoding (Blastware files)
|
||||
|
||||
All timestamps in N00 and MLG files use an **8-byte big-endian format**:
|
||||
|
||||
| Byte | Field |
|
||||
|---|---|
|
||||
| 0 | day (uint8) |
|
||||
| 1 | month (uint8) |
|
||||
| 2–3 | year (uint16 BE) |
|
||||
| 4 | `0x00` (reserved) |
|
||||
| 5 | hour (uint8) |
|
||||
| 6 | minute (uint8) |
|
||||
| 7 | second (uint8) |
|
||||
|
||||
Example: `01 04 07 ea 00 00 1c 08` → April 1, 2026, 00:28:08.
|
||||
|
||||
Note: this differs from the 8-byte protocol timestamp (`[day][sub_code][month][year_HI][year_LO][0x00][hour][min][sec]` = 9 bytes) used in the device's on-wire 0C waveform records. The file format uses a compact 8-byte layout without the `sub_code` byte.
|
||||
|
||||
### D.3 N00 File Format — Single-Shot Waveform Event
|
||||
|
||||
**File layout:** `[22B header] [21B STRT record] [body bytes] [26B footer]`
|
||||
|
||||
#### D.3.1 STRT Record (21 bytes)
|
||||
|
||||
The STRT record immediately follows the 22-byte header.
|
||||
|
||||
| Offset | Length | Field | Notes |
|
||||
|---|---|---|---|
|
||||
| 0 | 4 | `STRT` | ASCII literal |
|
||||
| 4 | 2 | `ff fe` | Fixed |
|
||||
| 6 | 4 | event key (key4) | 4-byte waveform key |
|
||||
| 10 | 4 | device-specific | NOT a repeat of key4 — device-internal field |
|
||||
| 14 | 6 | device-specific | NOT zero-padded — device-internal fields |
|
||||
| 20 | 1 | rectime | uint8 seconds |
|
||||
|
||||
**Critical:** The STRT record must be copied verbatim from A5[0].data[7+strt_pos:] — bytes [10:20] contain device-specific values that cannot be reconstructed from protocol-level Event fields alone.
|
||||
|
||||
#### D.3.2 Body Bytes (variable)
|
||||
|
||||
The body is reconstructed from the raw A5 bulk waveform stream frames by stripping DLE framing markers and taking the appropriate slice of each frame's data section.
|
||||
|
||||
**Per-frame contribution (from `frame.data`):**
|
||||
|
||||
| Frame | Skip amount | Notes |
|
||||
|---|---|---|
|
||||
| A5[0] (probe) | `7 + strt_pos_in_w0 + 21` | Skip frame.data prefix + STRT record |
|
||||
| A5[1] | 13 | 7-byte prefix + 6-byte first-chunk header |
|
||||
| A5[2..N] | 12 | 7-byte prefix + 5-byte chunk header |
|
||||
| Terminator (page_key=0x0000) | 11 | 7-byte prefix + 4-byte terminator header |
|
||||
|
||||
**DLE strip rule:** For each frame's contribution (`frame.data[skip:]`), strip any `0x10` byte immediately followed by `0x02`, `0x03`, or `0x04`. Only the `0x10` is stripped; the following byte is kept as payload.
|
||||
|
||||
**Split-pair edge case:** When `frame.data[-1] == 0x10` AND `frame.chk_byte ∈ {0x02, 0x03, 0x04}`, the S3FrameParser split a DLE+XX pair at the payload/checksum boundary. Reunite the bytes before stripping (`relevant + bytes([chk_byte])`), then always remove the trailing chk_byte from the result (`stripped[:-1]`) — chk_byte is the wire checksum, never payload.
|
||||
|
||||
**Body/footer split:** Accumulate all frame contributions (data frames + terminator) into `all_bytes`. Then:
|
||||
- `body = all_bytes[:-26]` (variable length)
|
||||
- `footer = all_bytes[-26:]` (always 26 bytes — extracted from terminator content)
|
||||
|
||||
#### D.3.3 Footer (26 bytes)
|
||||
|
||||
The footer terminates the N00 file. Its bytes come directly from the terminator A5 frame's inner content — do NOT reconstruct from event metadata.
|
||||
|
||||
| Offset | Length | Field | Notes |
|
||||
|---|---|---|---|
|
||||
| 0 | 2 | `0e 08` | Fixed marker |
|
||||
| 2 | 8 | ts1 | Start timestamp (8B big-endian) |
|
||||
| 10 | 8 | ts2 | Stop timestamp (8B big-endian) |
|
||||
| 18 | 6 | `00 01 00 02 00 00` | Fixed |
|
||||
| 24 | 2 | CRC | 2-byte CRC — algorithm unconfirmed |
|
||||
|
||||
**CRC:** The 2-byte CRC at footer[24:26] has an unconfirmed algorithm. In M529LIY6.N00 it reads `fe da`. Attempts to match CRC-16/CCITT, CRC-16/IBM, CRC-32 (truncated), and 40+ polynomial/init combinations all failed. The writer copies it verbatim from the terminator frame.
|
||||
|
||||
### D.4 MLG File Format — Monitor Log
|
||||
|
||||
**File layout:** `[308B header] [N × 292B records]`
|
||||
|
||||
#### D.4.1 MLG Header (308 bytes)
|
||||
|
||||
| Offset | Length | Field | Notes |
|
||||
|---|---|---|---|
|
||||
| 0x00 | 22 | common header | prefix + `22 01 0e a0` type tag |
|
||||
| 0x16 | 16 | unknown | observed as zeros in BE11529.MLG |
|
||||
| 0x2A | 8 | serial number | null-padded ASCII (e.g. `"BE11529"`) |
|
||||
| 0x32 | remainder | zero pad | pads to 308 bytes total |
|
||||
|
||||
#### D.4.2 MLG Record (292 bytes each)
|
||||
|
||||
| Offset | Length | Field | Notes |
|
||||
|---|---|---|---|
|
||||
| 0 | 2 | CRC | 2-byte CRC — algorithm unconfirmed; write as `00 00` |
|
||||
| 2 | 4 | `22 01 0e 80` | Record marker |
|
||||
| 6 | 8 | ts1 | Start timestamp (8B big-endian) |
|
||||
| 14 | 8 | ts2 | Stop timestamp (8B big-endian); zeros if no stop |
|
||||
| 22 | 4 | flags | Record type flags (see below) |
|
||||
| 26 | 10 | serial | Null-padded ASCII serial number |
|
||||
| 36 | variable | text | Type-dependent content |
|
||||
| — | remainder | zero pad | pads to 292 bytes total |
|
||||
|
||||
**Record flags:**
|
||||
|
||||
| Value | Meaning |
|
||||
|---|---|
|
||||
| `ff ff 00 00` | Monitoring start with no stop recorded |
|
||||
| `01 00 02 00` | Triggered event (has ts1 + ts2) |
|
||||
| `02 00 00 00` | Monitoring interval (has ts1 + ts2) |
|
||||
|
||||
**Text content for triggered events (`flags = 01 00 02 00`):**
|
||||
|
||||
| Byte | Field |
|
||||
|---|---|
|
||||
| 0 | `0x08` |
|
||||
| 1–8 | ts1 copy (8B big-endian) |
|
||||
| 9+ | `"Geo: X.XXX in/s\x00"` ASCII geo threshold |
|
||||
|
||||
#### D.4.3 MLG CRC
|
||||
|
||||
The 2-byte CRC at record[0:2] uses an unconfirmed algorithm. Tested against CRC-16/CCITT, CRC-16/IBM, CRC-32 (truncated), word sums, XOR variants, and 40+ polynomial/init combinations — none matched. The writer emits `00 00`. Blastware may reject files with incorrect CRCs (impact on import unknown — TODO: test).
|
||||
|
||||
### D.5 Filename Encoding ✅ CONFIRMED 2026-04-21
|
||||
|
||||
Blastware assigns waveform filenames of the form `M<serial3><stem><ext>`, where:
|
||||
|
||||
#### D.5.1 Serial Prefix
|
||||
|
||||
`"M"` + last 3 decimal digits of the device serial number.
|
||||
|
||||
Example: serial `"BE11529"` → prefix `"M529"`.
|
||||
|
||||
#### D.5.2 Stem — 4-character base-36 timestamp encoding
|
||||
|
||||
```
|
||||
stem_int = floor((event_local_time − 1985-01-01T00:00:00_local) / 1296)
|
||||
stem = 4-character uppercase base-36 string of stem_int
|
||||
```
|
||||
|
||||
- **Unit:** 1296 seconds = 36² seconds ≈ 21.6 minutes per stem increment
|
||||
- **Epoch:** January 1, 1985, 00:00:00 local time (Instantel founding year)
|
||||
- **Alphabet:** `"0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"` (digits then uppercase letters)
|
||||
- **Collision:** Events within the same 21.6-minute window share a stem; their extension distinguishes them
|
||||
|
||||
Confirmed against 6 events (April 1–9, 2026):
|
||||
|
||||
| Stem | Event time | Epoch estimate |
|
||||
|---|---|---|
|
||||
| LIY6 | 2026-04-01 00:28 | 1985-01-01 00:23 local |
|
||||
| LJ31 | 2026-04-03 15:20 | 1985-01-01 00:22 local |
|
||||
| LJ8V | 2026-04-06 18:52 | 1985-01-01 00:25 local |
|
||||
| LJDY | 2026-04-09 12:46 | 1985-01-01 00:23 local |
|
||||
|
||||
All 6 stems match exactly. Epoch estimates converge within ±7 minutes of midnight Jan 1 1985.
|
||||
|
||||
#### D.5.3 Extension taxonomy
|
||||
|
||||
Third character of extension is always `'0'`. File type is identified by extension, not by the type tag in the header (all waveform extensions share type tag `00 12 03 00`).
|
||||
|
||||
| Extension | Recording mode | Sample rate | Status |
|
||||
|---|---|---|---|
|
||||
| `.N00` | Single Shot (0x00) | 1024 sps | ✅ CONFIRMED |
|
||||
| `.9T0` | Continuous (0x01) | 1024 sps | ✅ CONFIRMED |
|
||||
| `.490` | ? | ? | ❓ observed from M529LJ8V.490 |
|
||||
| `.5K0` | ? | ? | ❓ observed from M529LJDY.5K0 |
|
||||
| `.980` | ? | ? | ❓ observed from M529LJDY.980 |
|
||||
| `.ML0` | ? | ? | ❓ observed from M529LJDY.ML0 (167s duration; possibly Histogram) |
|
||||
|
||||
**Why 5 extensions for "Continuous"?** Binary analysis of all 6 example files shows that `.9T0`, `.490`, `.5K0`, `.980`, `.ML0` are byte-for-byte identical in all metadata regions (compliance anchor block, channel descriptor blocks `Tran/Vert/Long/MicL`). The A5 frame 7 body reflects the **session-start** compliance config, not the per-event capture config. All 5 files show recording_mode=0x01 and sample_rate=1024 in the body. The extension must therefore encode the **capture-time** compliance state — likely a combination of recording mode, sample rate, and possibly mic units or other options. This cannot be determined from file body alone without capture-time compliance data from the 0C record sub_code and the actual waveform sample count.
|
||||
|
||||
**DLE-shift offset note for reading recording_mode from N00/9T0 body:**
|
||||
|
||||
The compliance block in the file body has been through `_strip_inner_frame_dles`. The 0x10 constant at logical `anchor−7` (between recording_mode and sample_rate_HI) gets stripped when sample_rate_HI = `0x04` (1024 sps), because `0x10` precedes `0x04 ∈ {0x02,0x03,0x04}`. After stripping, the anchor shifts left by 1, so:
|
||||
|
||||
| 1024 sps (strip occurs) | 2048 or 4096 sps (no strip) |
|
||||
|---|---|
|
||||
| `file[anc−7]` = recording_mode | `file[anc−8]` = recording_mode |
|
||||
| `file[anc−6:anc−4]` = sample_rate | `file[anc−6:anc−4]` = sample_rate |
|
||||
|
||||
For 1024 sps files, the expected file bytes around the anchor are:
|
||||
```
|
||||
file[anc−9]: mode_prefix (0x00 for Single Shot/Continuous; 0x10 for Histogram)
|
||||
file[anc−8]: 0x00 (was recording_mode, but shifted away — now reads 0x00 for mode_prefix)
|
||||
file[anc−7]: recording_mode (0x00=Single Shot, 0x01=Continuous, etc.)
|
||||
file[anc−6]: 0x04 (sample_rate_HI for 1024 sps)
|
||||
file[anc−5]: 0x00 (sample_rate_LO)
|
||||
file[anc−4]: histogram_interval_HI
|
||||
file[anc−3]: histogram_interval_LO
|
||||
```
|
||||
|
||||
---
|
||||
|
||||
*All findings reverse-engineered from live RS-232 bridge captures.*
|
||||
*Cross-referenced from 2026-03-02 with Instantel MiniMate Plus Operator Manual (716U0101 Rev 15).*
|
||||
*This is a living document — append changelog entries and timestamps as new findings are confirmed or corrected.*
|
||||
@@ -0,0 +1,777 @@
|
||||
"""
|
||||
blastware_file.py — Blastware binary file codec for bidirectional interoperability.
|
||||
|
||||
Reads and writes the proprietary Instantel/Blastware file formats:
|
||||
.N00 — Single-shot triggered waveform event
|
||||
.9T0 — Continuous-mode triggered waveform event
|
||||
.MLG — Monitor log (monitoring session history)
|
||||
|
||||
All formats share a common 22-byte file header prefix. Blastware identifies
|
||||
the file type by extension, not by a magic marker inside the header.
|
||||
|
||||
IMPORTANT — .N00 vs .9T0:
|
||||
Both extensions share identical internal binary structure (same 22-byte
|
||||
header, same type tag 00 12 03 00, same STRT record layout). Blastware
|
||||
uses the extension to identify the recording mode:
|
||||
.N00 → single-shot (0C waveform sub_code = 0x10)
|
||||
.9T0 → continuous (0C waveform sub_code = 0x03)
|
||||
Callers should use blastware_filename() to pick the correct extension
|
||||
from event.record_type. Histogram-mode file extension is unknown (TODO).
|
||||
|
||||
─── File structure overview ─────────────────────────────────────────────────────
|
||||
|
||||
N00 (single-shot waveform, confirmed from example-events/4-3-26-multi/M529LIY6.N00):
|
||||
|
||||
[22B header] [21B STRT record] [body bytes] [26B footer]
|
||||
|
||||
Header (22 bytes):
|
||||
10 00 01 80 00 00 — fixed prefix
|
||||
49 6e 73 74 61 6e 74 65 6c 00 — b'Instantel\x00'
|
||||
07 2c — fixed
|
||||
00 12 03 00 — N00 type marker
|
||||
|
||||
STRT record (21 bytes, immediately follows header):
|
||||
53 54 52 54 — b'STRT'
|
||||
ff fe — fixed (2 bytes)
|
||||
[key4] — 4-byte waveform event key
|
||||
[key4] — 4-byte waveform event key (repeated)
|
||||
[zeros] — 7 bytes padding
|
||||
[rectime] — uint8 record time in seconds
|
||||
|
||||
Body (variable — reconstructed from A5 frame data):
|
||||
The body bytes are derived from the raw A5 frame wire content, specifically
|
||||
from the DLE-decoded representation of each frame's contribution. See the
|
||||
_frame_body_bytes() helper for the exact algorithm.
|
||||
|
||||
Footer (26 bytes):
|
||||
0e 08
|
||||
[ts1: 8B big-endian timestamp] — start timestamp
|
||||
[ts2: 8B big-endian timestamp] — stop timestamp
|
||||
00 01 00 02 00 00
|
||||
[crc: 2B] — CRC (algorithm unconfirmed; written as 0x00 0x00 placeholder)
|
||||
|
||||
Timestamp format (big-endian, 8 bytes):
|
||||
[day] [month] [year_HI] [year_LO] [0x00] [hour] [min] [sec]
|
||||
|
||||
MLG (monitor log, confirmed from example-events/4-3-26-multi/BE11529.MLG):
|
||||
|
||||
[308B header] [N × 292B records]
|
||||
|
||||
Header (308 bytes):
|
||||
Offset 0x00: 10 00 01 80 00 00 Instantel\x00 07 2c 22 01 0e a0 — fixed (16B)
|
||||
Offset 0x10: ... (unknown structure, written as zeros + serial)
|
||||
Offset 0x2A: serial number (8 bytes, null-padded ASCII, e.g. "BE11529")
|
||||
... zero-padded to 308 bytes total
|
||||
|
||||
Record (292 bytes each):
|
||||
[2B CRC] — unknown algorithm; written as 0x00 0x00
|
||||
22 01 0e 80 — record marker
|
||||
[ts1: 8B big-endian timestamp] — start time
|
||||
[ts2: 8B big-endian timestamp] — stop time (zeros if no stop)
|
||||
[4B flags] — see MLG_FLAGS_* constants below
|
||||
[10B serial] — null-padded serial number ASCII
|
||||
[text] — for trigger records: [0x08][8B ts1_copy] then ASCII "Geo: X.XXX in/s"
|
||||
for monitoring records: b'' (or minimal separator)
|
||||
[zero-padded to 292 bytes]
|
||||
|
||||
─── Critical implementation notes ──────────────────────────────────────────────
|
||||
|
||||
N00 body reconstruction algorithm (confirmed 2026-04-21 from verification against
|
||||
M529LIY6.N00 using raw_s3_20260403_153508.bin capture):
|
||||
|
||||
The N00 body bytes come from the A5 frame content, stripped of DLE-framing
|
||||
artifacts. Each A5 frame contributes a different slice of its data section,
|
||||
with DLE+{0x02,0x03,0x04} byte pairs stripped.
|
||||
|
||||
Skip amounts per frame index (offsets into frame.data):
|
||||
A5[0] (probe): data[strt_pos + 21 + 7] (skip header + STRT record)
|
||||
strt_pos found by searching frame.data[7:] for b'STRT';
|
||||
the contribution starts at strt_pos + 21 within data[7:]
|
||||
which equals strt_pos + 21 + 7 within frame.data.
|
||||
A5[1]: data[13] (skip 7-byte frame.data prefix + 6 header bytes)
|
||||
A5[2..N]: data[12] (skip 7-byte frame.data prefix + 5 header bytes)
|
||||
Terminator A5: data[11] (1 byte less than chunk frames; terminator inner header
|
||||
is 4 bytes instead of 5 — confirmed 2026-04-21)
|
||||
|
||||
DLE strip rule (applied AFTER slicing):
|
||||
Strip any 0x10 byte that is immediately followed by 0x02, 0x03, or 0x04.
|
||||
This undoes the DLE-escape that S3FrameParser preserves as literal pairs.
|
||||
Applied to frame.data[skip:] + bytes([frame.chk_byte]) together, then
|
||||
conditionally exclude the trailing chk_byte from the output.
|
||||
|
||||
chk_byte absorption:
|
||||
When frame.data[-1] == 0x10 AND frame.chk_byte ∈ {0x02, 0x03, 0x04},
|
||||
the last byte of frame.data is the DLE prefix of a split DLE+chk pair.
|
||||
Including chk_byte in the strip buffer allows the pair to be stripped as
|
||||
a unit. After stripping, the trailing chk_byte is ALWAYS removed — because
|
||||
_strip_inner_frame_dles keeps the byte after the DLE (the chk_byte value),
|
||||
and that value is the checksum, never payload. This applies to all three
|
||||
cases (chk ∈ {0x02, 0x03, 0x04}) identically.
|
||||
|
||||
MLG CRC:
|
||||
The algorithm that produces the 2-byte CRC at the start of each MLG record
|
||||
is unknown. All examined records use non-zero values that do not match
|
||||
CRC-16/CCITT, CRC-16/IBM, CRC-32 (truncated), word sums, XOR variants, or
|
||||
any of the 40+ polynomial/init combinations tested. The writer emits 0x0000.
|
||||
This produces files that Blastware may reject or display without the CRC check —
|
||||
the exact impact on BW import is unknown (TODO: test).
|
||||
|
||||
─── Public API ──────────────────────────────────────────────────────────────────
|
||||
|
||||
blastware_filename(event, serial)
|
||||
Return the correct Blastware filename (e.g. "M529LIY6.N00") for an event.
|
||||
Uses event.record_type to pick .N00 (single-shot) vs .9T0 (continuous).
|
||||
|
||||
write_n00(event, a5_frames, path)
|
||||
Create a .N00 or .9T0 waveform file from an Event and the full A5 frame
|
||||
list (include_terminator=True required when calling read_bulk_waveform_stream).
|
||||
Identical binary format for both extensions — caller picks the path/ext.
|
||||
|
||||
read_n00(path) → Event
|
||||
Parse a .N00 file into an Event object with waveform data populated.
|
||||
(Not yet implemented — placeholder raises NotImplementedError.)
|
||||
|
||||
write_mlg(entries, serial, path)
|
||||
Create a .MLG file from a list of MonitorLogEntry objects.
|
||||
|
||||
read_mlg(path) → list[MonitorLogEntry]
|
||||
Parse a .MLG file into MonitorLogEntry objects.
|
||||
(Not yet implemented — placeholder raises NotImplementedError.)
|
||||
"""
|
||||
|
||||
from __future__ import annotations
|
||||
|
||||
import datetime
|
||||
import struct
|
||||
from pathlib import Path
|
||||
from typing import Optional, Union
|
||||
|
||||
from .framing import S3Frame
|
||||
from .models import Event, MonitorLogEntry, Timestamp
|
||||
|
||||
# ── File header constants ─────────────────────────────────────────────────────
|
||||
|
||||
# Common 16-byte prefix shared by N00 and MLG (confirmed from binary inspection).
|
||||
_FILE_HEADER_PREFIX = bytes.fromhex("1000018000004973") + b"tantel\x00\x07\x2c"
|
||||
# = 10 00 01 80 00 00 49 73 74 61 6e 74 65 6c 00 07 2c (17 bytes)
|
||||
# Confirmed breakdown: 10 00 01 80 00 00 = fixed; "Instantel\x00" = 10B; 07 2c = fixed
|
||||
|
||||
# Simpler construction:
|
||||
_FILE_HEADER_PREFIX = b"\x10\x00\x01\x80\x00\x00Instantel\x00\x07\x2c" # 17 bytes
|
||||
|
||||
# N00 type tag (4 bytes after common prefix)
|
||||
_N00_TYPE_TAG = b"\x00\x12\x03\x00" # confirmed from M529LIY6.N00 offset 0x11..0x14
|
||||
|
||||
# MLG type tag (4 bytes after common prefix)
|
||||
_MLG_TYPE_TAG = b"\x22\x01\x0e\xa0" # confirmed from BE11529.MLG offset 0x11..0x14
|
||||
|
||||
# Total header sizes
|
||||
_N00_HEADER_SIZE = 22 # 17 + 4 = 21... wait. Let me recalculate.
|
||||
# From binary: first 22 bytes = header, then STRT at byte 22.
|
||||
# 17-byte common prefix + 4-byte type tag = 21 bytes. But observed header is 22B.
|
||||
# Checking: 6 fixed + 10 "Instantel\x00" + 2 "07 2c" = 18B prefix, then 4B type tag = 22B.
|
||||
# Re-count: b"\x10\x00\x01\x80\x00\x00" = 6B + b"Instantel\x00" = 10B + b"\x07\x2c" = 2B = 18B prefix.
|
||||
_FILE_HEADER_PREFIX = b"\x10\x00\x01\x80\x00\x00Instantel\x00\x07\x2c" # 18 bytes
|
||||
_N00_HEADER_SIZE = 22 # 18 + 4 = 22 bytes ✅
|
||||
_MLG_HEADER_SIZE = 308 # confirmed from BE11529.MLG
|
||||
|
||||
# MLG record marker (4 bytes after 2-byte CRC at start of each record)
|
||||
_MLG_RECORD_MARKER = b"\x22\x01\x0e\x80"
|
||||
_MLG_RECORD_SIZE = 292 # bytes per record (confirmed from BE11529.MLG)
|
||||
|
||||
# MLG record flags (4 bytes at record[22:26])
|
||||
# Confirmed from BE11529.MLG binary inspection:
|
||||
MLG_FLAGS_START_ONLY = b"\xff\xff\x00\x00" # monitoring start with no stop
|
||||
MLG_FLAGS_TRIGGER = b"\x01\x00\x02\x00" # triggered event (has ts1 + ts2)
|
||||
MLG_FLAGS_INTERVAL = b"\x02\x00\x00\x00" # monitoring interval (has ts1 + ts2)
|
||||
|
||||
|
||||
# ── Timestamp helpers ─────────────────────────────────────────────────────────
|
||||
|
||||
def _encode_ts_be(ts: Optional[datetime.datetime]) -> bytes:
|
||||
"""
|
||||
Encode a datetime as an 8-byte big-endian Blastware timestamp.
|
||||
|
||||
Format (N00 and MLG record timestamps):
|
||||
[day][month][year_HI][year_LO][0x00][hour][min][sec]
|
||||
|
||||
Big-endian year confirmed from M529LIY6.N00 footer:
|
||||
footer bytes [2..9] = 01 04 07 ea 00 00 1c 08
|
||||
→ day=1 month=4 year=0x07ea=2026 hour=0 min=28 sec=8 ✅
|
||||
|
||||
Returns 8 zero bytes if ts is None.
|
||||
"""
|
||||
if ts is None:
|
||||
return bytes(8)
|
||||
return bytes([
|
||||
ts.day,
|
||||
ts.month,
|
||||
(ts.year >> 8) & 0xFF,
|
||||
ts.year & 0xFF,
|
||||
0x00,
|
||||
ts.hour,
|
||||
ts.minute,
|
||||
ts.second,
|
||||
])
|
||||
|
||||
|
||||
def _decode_ts_be(raw: bytes) -> Optional[datetime.datetime]:
|
||||
"""
|
||||
Decode an 8-byte big-endian Blastware timestamp.
|
||||
|
||||
Returns None if the bytes are all zero or structurally invalid.
|
||||
"""
|
||||
if len(raw) < 8 or raw == bytes(8):
|
||||
return None
|
||||
day = raw[0]
|
||||
month = raw[1]
|
||||
year = (raw[2] << 8) | raw[3]
|
||||
hour = raw[5]
|
||||
minute = raw[6]
|
||||
sec = raw[7]
|
||||
try:
|
||||
return datetime.datetime(year, month, day, hour, minute, sec)
|
||||
except ValueError:
|
||||
return None
|
||||
|
||||
|
||||
def _ts_from_model(ts: Optional[Timestamp]) -> Optional[datetime.datetime]:
|
||||
"""Convert a models.Timestamp to datetime.datetime, or None."""
|
||||
if ts is None:
|
||||
return None
|
||||
try:
|
||||
return datetime.datetime(ts.year, ts.month, ts.day, ts.hour, ts.minute, ts.second)
|
||||
except (ValueError, TypeError):
|
||||
return None
|
||||
|
||||
|
||||
# ── DLE strip helper ──────────────────────────────────────────────────────────
|
||||
|
||||
def _strip_inner_frame_dles(data: bytes) -> bytes:
|
||||
"""
|
||||
Strip DLE (0x10) framing markers from A5 inner-frame content.
|
||||
|
||||
The A5 (bulk waveform stream) response body contains DLE-encoded sub-frame
|
||||
structure. S3FrameParser preserves DLE+XX pairs as two literal bytes in
|
||||
frame.data. Only the DLE marker byte needs to be removed; the following
|
||||
byte is actual payload content.
|
||||
|
||||
Rule: when 0x10 is immediately followed by {0x02, 0x03, 0x04}, strip the
|
||||
0x10 (DLE marker) and keep the following byte as payload.
|
||||
|
||||
Lone 0x10 bytes not followed by {0x02, 0x03, 0x04} are kept as-is.
|
||||
|
||||
Confirmed correct by verifying reconstructed N00 body against M529LIY6.N00:
|
||||
- 0x10 0x02 in terminator → 0x02 kept ✓
|
||||
- 0x10 0x04 in terminator (month byte) → 0x04 kept ✓
|
||||
"""
|
||||
out = bytearray()
|
||||
i = 0
|
||||
while i < len(data):
|
||||
b = data[i]
|
||||
if b == 0x10 and i + 1 < len(data) and data[i + 1] in {0x02, 0x03, 0x04}:
|
||||
# Strip the DLE marker; the next byte is payload and will be appended
|
||||
# in the next loop iteration.
|
||||
i += 1
|
||||
continue
|
||||
out.append(b)
|
||||
i += 1
|
||||
return bytes(out)
|
||||
|
||||
|
||||
def _frame_body_bytes(frame: S3Frame, skip: int) -> bytes:
|
||||
"""
|
||||
Extract the N00 body contribution from one A5 S3Frame.
|
||||
|
||||
The contribution is frame.data[skip:] with inner-frame DLE pairs stripped
|
||||
per _strip_inner_frame_dles(). The chk_byte is temporarily appended before
|
||||
stripping to handle the split-pair edge case where a DLE at the end of
|
||||
frame.data is paired with chk_byte.
|
||||
|
||||
Split-pair edge case (confirmed for A5[8] of M529LIY6.N00, 2026-04-21):
|
||||
|
||||
S3FrameParser appends DLE+XX pairs as two literal bytes when XX ∉ {DLE, ETX}.
|
||||
When the LAST occurrence of such a pair straddles the payload/checksum boundary
|
||||
(i.e., DLE is the last byte of raw_payload and XX is the checksum), the parser
|
||||
splits them:
|
||||
- DLE ends up as the last byte of frame.data (frame.data[-1] == 0x10)
|
||||
- XX is stored as frame.chk_byte
|
||||
|
||||
To strip the pair correctly, we reunite the bytes before calling the strip
|
||||
function. Since chk_byte is the checksum (not payload data), it is excluded
|
||||
from the final output regardless of whether it was part of a pair.
|
||||
|
||||
Post-strip chk_byte removal (ALL cases):
|
||||
_strip_inner_frame_dles strips the 0x10 and KEEPS chk_byte in all cases.
|
||||
Chk_byte is always the checksum (not payload), so always strip it off.
|
||||
|
||||
Args:
|
||||
frame: S3Frame with frame.data and frame.chk_byte populated.
|
||||
skip: Number of leading bytes in frame.data to exclude (frame header).
|
||||
|
||||
Returns:
|
||||
bytes — the N00 body contribution for this frame.
|
||||
"""
|
||||
if skip >= len(frame.data):
|
||||
return b""
|
||||
|
||||
relevant = frame.data[skip:]
|
||||
|
||||
# Detect split DLE+chk pair at the frame boundary.
|
||||
has_split_pair = (
|
||||
len(relevant) > 0
|
||||
and relevant[-1] == 0x10
|
||||
and frame.chk_byte in {0x02, 0x03, 0x04}
|
||||
)
|
||||
|
||||
if has_split_pair:
|
||||
# Reunite the split pair so the strip function sees both bytes together.
|
||||
buf = relevant + bytes([frame.chk_byte])
|
||||
stripped = _strip_inner_frame_dles(buf)
|
||||
# _strip_inner_frame_dles strips the DLE (0x10) and KEEPS chk_byte.
|
||||
# chk_byte is the received checksum — never payload — so remove it.
|
||||
# This is correct for all values in {0x02, 0x03, 0x04}.
|
||||
if stripped:
|
||||
stripped = stripped[:-1]
|
||||
return stripped
|
||||
else:
|
||||
return _strip_inner_frame_dles(relevant)
|
||||
|
||||
|
||||
# ── Filename helper ───────────────────────────────────────────────────────────
|
||||
|
||||
_INSTANTEL_EPOCH = datetime.datetime(1985, 1, 1, 0, 0, 0)
|
||||
"""
|
||||
Instantel timestamp epoch — January 1, 1985, 00:00:00 local time.
|
||||
Confirmed 2026-04-21: stem values for 6 independent events (April 1–9, 2026)
|
||||
all converge to this epoch when decoded as floor(seconds_since_epoch / 1296).
|
||||
1985 is the year Instantel was founded.
|
||||
"""
|
||||
|
||||
_STEM_UNIT_SEC = 1296 # = 36^2 seconds ≈ 21.6 minutes per stem unit
|
||||
|
||||
_STEM_CHARS = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"
|
||||
|
||||
# Known waveform file extensions (third character is always '0' — confirmed from
|
||||
# observed files: .N00, .9T0, .490, .5K0, .980, .ML0).
|
||||
#
|
||||
# Confirmed mappings:
|
||||
# .N00 → single-shot (recording_mode=0 in compliance anchor at file[anc-7])
|
||||
# .9T0 → continuous (recording_mode=1 in compliance anchor at file[anc-7])
|
||||
# Unknown mappings (observed from M529LJDY.* and M529LJ8V.*):
|
||||
# .490 → ? (April 6, 13 sec record)
|
||||
# .5K0 → ? (April 9, 10 sec record)
|
||||
# .980 → ? (April 9, 7 sec record)
|
||||
# .ML0 → ? (April 9, 167 sec record — possibly Histogram or Histogram+Continuous)
|
||||
#
|
||||
# IMPORTANT — extension encodes capture-time config, NOT session-start config:
|
||||
# Binary analysis (2026-04-21) shows that the compliance anchor region in the
|
||||
# file body encodes the SESSION-START config (A5 frame 7), not the per-event
|
||||
# config. All 5 non-N00 example files show recording_mode=1 (Continuous) and
|
||||
# sample_rate=1024 in the body even though they carry 5 different extensions.
|
||||
# The extension must therefore be assigned by Blastware based on the device's
|
||||
# capture-time compliance state (read from the 0C record sub_code and sample
|
||||
# data), which is NOT preserved verbatim in the A5 body.
|
||||
#
|
||||
# How to READ recording_mode from a .N00/.9T0 body (DLE-strip offset note):
|
||||
# The logical compliance layout has a constant 0x10 at anchor−7 (between
|
||||
# recording_mode at anchor−8 and sample_rate_HI at anchor−6). When
|
||||
# sample_rate_HI = 0x04 (1024 sps), _strip_inner_frame_dles strips the 0x10
|
||||
# because it precedes 0x04 ∈ {0x02,0x03,0x04}. After stripping, the anchor
|
||||
# shifts one byte closer to start, so in the FILE:
|
||||
# file[anc−7] = recording_mode (logical anc−8, shifted)
|
||||
# file[anc−6] = sample_rate_HI (logical anc−6, was 0x04)
|
||||
# file[anc−5] = sample_rate_LO
|
||||
# file[anc−4] = histogram_interval_HI
|
||||
# file[anc−3] = histogram_interval_LO
|
||||
# For sample_rate ≠ 1024 (0x08 or 0x10 as HI byte), the 0x10 constant at
|
||||
# logical anc−7 is NOT stripped (since 0x08/0x10 ∉ {0x02,0x03,0x04}), so
|
||||
# recording_mode remains at file[anc−8] and sample_rate at file[anc−6:anc−4].
|
||||
#
|
||||
# Multiple events within the same ~21.6-minute window share a stem but get
|
||||
# different extensions, so extension encodes recording mode × sample rate (and
|
||||
# possibly mic units or other settings) at the time of capture.
|
||||
|
||||
|
||||
def _make_stem(ts_local: datetime.datetime) -> str:
|
||||
"""
|
||||
Encode a local timestamp as a 4-character uppercase base-36 stem.
|
||||
|
||||
Algorithm (confirmed 2026-04-21 from 6 known file/timestamp pairs):
|
||||
stem_int = floor((ts_local - Jan_1_1985_midnight_local) / 1296_seconds)
|
||||
stem = 4-char uppercase base-36 encoding of stem_int
|
||||
|
||||
Unit = 36² = 1296 seconds ≈ 21.6 minutes. Events within the same 1296-second
|
||||
window receive the same stem; their extension distinguishes them.
|
||||
"""
|
||||
delta_sec = int((ts_local - _INSTANTEL_EPOCH).total_seconds())
|
||||
n = delta_sec // _STEM_UNIT_SEC
|
||||
s = ""
|
||||
for _ in range(4):
|
||||
s = _STEM_CHARS[n % 36] + s
|
||||
n //= 36
|
||||
return s
|
||||
|
||||
|
||||
def blastware_filename(event: Event, serial: str) -> str:
|
||||
"""
|
||||
Return the correct Blastware waveform filename for an event.
|
||||
|
||||
Stem encoding (CONFIRMED 2026-04-21 — verified against 6 known files):
|
||||
- Serial prefix: "M" + last 3 digits of serial (e.g. "BE11529" → "M529")
|
||||
- Stem: floor(event_start_seconds_since_1985-01-01 / 1296), 4-char base-36
|
||||
- Extension: encodes recording mode (N00=single-shot, 9T0=continuous confirmed;
|
||||
other extensions like .490, .5K0, .980, .ML0 observed but not decoded)
|
||||
|
||||
Note: the extension space is larger than N00/9T0. Multiple events within
|
||||
the same ~21.6-minute window share a stem and are distinguished only by
|
||||
their extension. This function returns .N00 or .9T0 based on record_type
|
||||
which is correct for the two confirmed modes; other modes remain TODO.
|
||||
|
||||
Args:
|
||||
event: Event object with record_type and timestamp set.
|
||||
serial: Device serial number string (e.g. "BE11529").
|
||||
|
||||
Returns:
|
||||
Filename string (e.g. "M529LIY6.N00").
|
||||
"""
|
||||
# Determine extension from record_type
|
||||
if event.record_type == "continuous":
|
||||
ext = ".9T0"
|
||||
else:
|
||||
# Default to .N00 for single-shot and unknown modes
|
||||
ext = ".N00"
|
||||
|
||||
# Serial prefix: "M" + last 3 digits (e.g. BE11529 → M529)
|
||||
serial_digits = "".join(c for c in serial if c.isdigit())
|
||||
prefix = "M" + serial_digits[-3:] if len(serial_digits) >= 3 else "M000"
|
||||
|
||||
# Stem from event start timestamp
|
||||
if event.timestamp is not None:
|
||||
try:
|
||||
ts_local = datetime.datetime(
|
||||
event.timestamp.year, event.timestamp.month, event.timestamp.day,
|
||||
event.timestamp.hour, event.timestamp.minute, event.timestamp.second,
|
||||
)
|
||||
stem = _make_stem(ts_local)
|
||||
except (ValueError, TypeError, AttributeError):
|
||||
stem = "0000"
|
||||
else:
|
||||
stem = "0000"
|
||||
|
||||
return prefix + stem + ext
|
||||
|
||||
|
||||
# ── N00 file writer ───────────────────────────────────────────────────────────
|
||||
|
||||
def write_n00(
|
||||
event: Event,
|
||||
a5_frames: list[S3Frame],
|
||||
path: Union[str, Path],
|
||||
) -> None:
|
||||
"""
|
||||
Write a Blastware .N00 waveform file from a downloaded event.
|
||||
|
||||
Args:
|
||||
event: Event object (populated by get_events() or download_waveform()).
|
||||
Used for the STRT record (key, rectime) and footer timestamps.
|
||||
a5_frames: Complete A5 frame list INCLUDING the terminator frame
|
||||
(page_key=0x0000). Pass include_terminator=True to
|
||||
read_bulk_waveform_stream() when collecting frames.
|
||||
Must have at least 2 frames (probe + terminator).
|
||||
path: Destination file path. Parent directory must exist.
|
||||
Extension is not enforced — caller should use ".N00".
|
||||
|
||||
File layout:
|
||||
[22B header] [21B STRT] [body bytes] [26B footer]
|
||||
|
||||
Raises:
|
||||
ValueError: if a5_frames is empty or has no terminator (page_key=0).
|
||||
OSError: if the file cannot be written.
|
||||
|
||||
Confirmed correct N00 body reconstruction against M529LIY6.N00 (2026-04-21).
|
||||
"""
|
||||
if not a5_frames:
|
||||
raise ValueError("a5_frames must not be empty")
|
||||
|
||||
path = Path(path)
|
||||
|
||||
# ── Extract STRT record from probe frame ────────────────────────────────
|
||||
# The STRT record (21 bytes) lives verbatim inside A5[0].data[7:].
|
||||
# It is stored as-is in the N00 file — do NOT reconstruct it from Event
|
||||
# fields, as bytes [10:14] and [14:20] contain device-specific values
|
||||
# (not simply key4 repeated or zero-padded). Confirmed 2026-04-21.
|
||||
#
|
||||
# STRT layout (21 bytes, observed in M529LIY6.N00):
|
||||
# [0:4] b'STRT'
|
||||
# [4:6] 0xff 0xfe (fixed)
|
||||
# [6:10] key4 (event key)
|
||||
# [10:14] device-specific field (NOT a key4 repeat)
|
||||
# [14:20] device-specific fields (NOT zeros)
|
||||
# [20] rectime uint8 seconds
|
||||
w0 = a5_frames[0].data[7:]
|
||||
strt_pos_w0 = w0.find(b"STRT")
|
||||
if strt_pos_w0 >= 0:
|
||||
strt = bytes(w0[strt_pos_w0 : strt_pos_w0 + 21])
|
||||
else:
|
||||
# Fallback: construct a minimal STRT if probe frame lacks it
|
||||
key4 = event._waveform_key if hasattr(event, '_waveform_key') and event._waveform_key else bytes(4)
|
||||
rectime = event.rectime_seconds if event.rectime_seconds is not None else 0
|
||||
strt = b"STRT" + b"\xff\xfe" + key4 + bytes(14) + bytes([rectime & 0xFF])
|
||||
if len(strt) != 21:
|
||||
raise ValueError(f"STRT record must be 21 bytes, got {len(strt)}")
|
||||
|
||||
strt_pos_in_w0 = strt_pos_w0 if strt_pos_w0 >= 0 else 0
|
||||
|
||||
# ── Build N00 header ─────────────────────────────────────────────────────
|
||||
header = _FILE_HEADER_PREFIX + _N00_TYPE_TAG
|
||||
assert len(header) == _N00_HEADER_SIZE, f"N00 header must be {_N00_HEADER_SIZE} bytes"
|
||||
|
||||
# ── Build body from A5 frames ────────────────────────────────────────────
|
||||
# The N00 body is reconstructed from ALL A5 frames (data + terminator).
|
||||
# The terminator frame's contribution includes the 26-byte footer at its end.
|
||||
#
|
||||
# Reconstruction layout (confirmed from M529LIY6.N00, 2026-04-21):
|
||||
# all_bytes = contributions from A5[0..N] + terminator_contribution
|
||||
# body = all_bytes[:-26] (everything except the last 26 bytes)
|
||||
# footer = all_bytes[-26:] (last 26 bytes = the N00 footer)
|
||||
#
|
||||
# The footer bytes come directly from the terminator frame's inner content —
|
||||
# using them verbatim ensures timestamps match the device's recorded values.
|
||||
|
||||
# Separate terminator from data frames
|
||||
body_frames = a5_frames
|
||||
term_frame: Optional[S3Frame] = None
|
||||
if a5_frames and a5_frames[-1].page_key == 0x0000:
|
||||
body_frames = a5_frames[:-1]
|
||||
term_frame = a5_frames[-1]
|
||||
|
||||
# Skip for A5[0]: 7-byte frame.data prefix + strt_pos_in_w0 + 21 STRT bytes.
|
||||
# strt_pos_in_w0 was already found in the STRT extraction block above.
|
||||
probe_skip = 7 + strt_pos_in_w0 + 21
|
||||
|
||||
all_bytes = bytearray()
|
||||
|
||||
for fi, frame in enumerate(body_frames):
|
||||
if fi == 0:
|
||||
skip = probe_skip
|
||||
elif fi == 1:
|
||||
skip = 13 # 7-byte frame.data prefix + 6-byte first-chunk header
|
||||
else:
|
||||
skip = 12 # 7-byte frame.data prefix + 5-byte chunk header
|
||||
all_bytes.extend(_frame_body_bytes(frame, skip))
|
||||
|
||||
# Terminator contributes its content, which ends with the 26-byte footer.
|
||||
# skip=11 (not 12) because the terminator's inner frame header is 4 bytes,
|
||||
# one shorter than chunk frames' 5-byte inner header. Confirmed 2026-04-21.
|
||||
if term_frame is not None:
|
||||
all_bytes.extend(_frame_body_bytes(term_frame, 11))
|
||||
|
||||
if len(all_bytes) >= 26:
|
||||
body = bytes(all_bytes[:-26])
|
||||
footer = bytes(all_bytes[-26:])
|
||||
else:
|
||||
# Fallback: no terminator or very short stream → build footer from event metadata
|
||||
body = bytes(all_bytes)
|
||||
start_dt = _ts_from_model(event.timestamp)
|
||||
stop_dt: Optional[datetime.datetime] = None
|
||||
if start_dt is not None and event.rectime_seconds:
|
||||
stop_dt = start_dt + datetime.timedelta(seconds=event.rectime_seconds)
|
||||
footer = (
|
||||
b"\x0e\x08"
|
||||
+ _encode_ts_be(start_dt)
|
||||
+ _encode_ts_be(stop_dt)
|
||||
+ b"\x00\x01\x00\x02\x00\x00"
|
||||
+ b"\x00\x00" # CRC placeholder
|
||||
)
|
||||
|
||||
# ── Write file ───────────────────────────────────────────────────────────
|
||||
with open(path, "wb") as f:
|
||||
f.write(header)
|
||||
f.write(strt)
|
||||
f.write(body)
|
||||
f.write(footer)
|
||||
|
||||
|
||||
def read_n00(path: Union[str, Path]) -> Event:
|
||||
"""
|
||||
Parse a Blastware .N00 file into an Event object.
|
||||
|
||||
NOT YET IMPLEMENTED.
|
||||
|
||||
Args:
|
||||
path: Path to the .N00 file.
|
||||
|
||||
Returns:
|
||||
Event object with waveform data populated.
|
||||
|
||||
Raises:
|
||||
NotImplementedError: always (pending implementation).
|
||||
"""
|
||||
raise NotImplementedError("read_n00() is not yet implemented")
|
||||
|
||||
|
||||
# ── MLG file writer ───────────────────────────────────────────────────────────
|
||||
|
||||
def _build_mlg_header(serial: str) -> bytes:
|
||||
"""
|
||||
Build the 308-byte MLG file header.
|
||||
|
||||
Header structure (confirmed from BE11529.MLG binary inspection):
|
||||
Offset 0x00: 10 00 01 80 00 00 Instantel\x00 07 2c 22 01 0e a0 (22B)
|
||||
Offset 0x16: ... (16B unknown — observed as zeros in BE11529.MLG)
|
||||
Offset 0x2A: serial number (8 bytes, null-padded ASCII)
|
||||
... rest zero-padded to 308 bytes
|
||||
|
||||
The serial string "BE11529" appears at offset 0x2A (42 decimal).
|
||||
"""
|
||||
buf = bytearray(_MLG_HEADER_SIZE)
|
||||
|
||||
# Common prefix + MLG type tag
|
||||
prefix = _FILE_HEADER_PREFIX + _MLG_TYPE_TAG # 22 bytes
|
||||
buf[0:len(prefix)] = prefix
|
||||
|
||||
# Serial number at offset 0x2A
|
||||
serial_bytes = serial.encode("ascii", errors="replace")[:8]
|
||||
serial_padded = serial_bytes.ljust(8, b"\x00")
|
||||
buf[0x2A : 0x2A + 8] = serial_padded
|
||||
|
||||
return bytes(buf)
|
||||
|
||||
|
||||
def _build_mlg_record(
|
||||
entry: MonitorLogEntry,
|
||||
serial: str,
|
||||
) -> bytes:
|
||||
"""
|
||||
Build one 292-byte MLG record from a MonitorLogEntry.
|
||||
|
||||
Record layout (confirmed from BE11529.MLG binary inspection):
|
||||
[0:2] CRC — 2-byte CRC (algorithm unknown; written as 0x0000)
|
||||
[2:6] marker — 22 01 0e 80
|
||||
[6:14] ts1 — 8B big-endian start timestamp
|
||||
[14:22] ts2 — 8B big-endian stop timestamp
|
||||
[22:26] flags — 4B record flags (see MLG_FLAGS_* constants)
|
||||
[26:36] serial — 10B null-padded serial number
|
||||
[36:] text — for triggered events: [0x08][8B ts1_copy]["Geo: X.XXX in/s"]
|
||||
for monitoring intervals: b"" or minimal separator
|
||||
[... zero-padded to 292 bytes]
|
||||
|
||||
Flags based on entry type:
|
||||
- MonitorLogEntry with start_time only (no stop_time): MLG_FLAGS_START_ONLY
|
||||
- MonitorLogEntry with both times and geo_threshold_ips set: MLG_FLAGS_TRIGGER
|
||||
- MonitorLogEntry with both times (monitoring interval): MLG_FLAGS_INTERVAL
|
||||
|
||||
The triggered-event text block (flags = MLG_FLAGS_TRIGGER):
|
||||
[0x08] [ts1: 8B] [ASCII "Geo: X.XXX in/s\x00"]
|
||||
Confirmed from BE11529.MLG records at offset 0x0134 and 0x0258.
|
||||
"""
|
||||
buf = bytearray(_MLG_RECORD_SIZE)
|
||||
|
||||
start_dt = (
|
||||
datetime.datetime(
|
||||
entry.start_time.year, entry.start_time.month, entry.start_time.day,
|
||||
entry.start_time.hour, entry.start_time.minute, entry.start_time.second,
|
||||
)
|
||||
if entry.start_time else None
|
||||
)
|
||||
stop_dt = (
|
||||
datetime.datetime(
|
||||
entry.stop_time.year, entry.stop_time.month, entry.stop_time.day,
|
||||
entry.stop_time.hour, entry.stop_time.minute, entry.stop_time.second,
|
||||
)
|
||||
if entry.stop_time else None
|
||||
)
|
||||
|
||||
# [0:2] CRC placeholder
|
||||
buf[0:2] = b"\x00\x00"
|
||||
|
||||
# [2:6] Record marker
|
||||
buf[2:6] = _MLG_RECORD_MARKER
|
||||
|
||||
# [6:14] ts1
|
||||
buf[6:14] = _encode_ts_be(start_dt)
|
||||
|
||||
# [14:22] ts2
|
||||
buf[14:22] = _encode_ts_be(stop_dt)
|
||||
|
||||
# [22:26] flags
|
||||
if stop_dt is None:
|
||||
flags = MLG_FLAGS_START_ONLY
|
||||
elif entry.geo_threshold_ips is not None:
|
||||
flags = MLG_FLAGS_TRIGGER
|
||||
else:
|
||||
flags = MLG_FLAGS_INTERVAL
|
||||
buf[22:26] = flags
|
||||
|
||||
# [26:36] serial (10B null-padded)
|
||||
serial_bytes = serial.encode("ascii", errors="replace")[:10]
|
||||
buf[26 : 26 + len(serial_bytes)] = serial_bytes
|
||||
|
||||
# [36:] text content
|
||||
pos = 36
|
||||
if flags == MLG_FLAGS_TRIGGER:
|
||||
# Extra ts1 copy: [0x08][ts1: 8B]
|
||||
buf[pos] = 0x08
|
||||
pos += 1
|
||||
buf[pos : pos + 8] = _encode_ts_be(start_dt)
|
||||
pos += 8
|
||||
|
||||
if entry.geo_threshold_ips is not None:
|
||||
geo_text = f"Geo: {entry.geo_threshold_ips:.3f} in/s\x00".encode("ascii")
|
||||
buf[pos : pos + len(geo_text)] = geo_text
|
||||
pos += len(geo_text)
|
||||
|
||||
return bytes(buf)
|
||||
|
||||
|
||||
def write_mlg(
|
||||
entries: list[MonitorLogEntry],
|
||||
serial: str,
|
||||
path: Union[str, Path],
|
||||
) -> None:
|
||||
"""
|
||||
Write a Blastware .MLG monitor log file.
|
||||
|
||||
Args:
|
||||
entries: List of MonitorLogEntry objects (from get_monitor_log_entries()).
|
||||
Each entry produces one 292-byte record in the file.
|
||||
serial: Device serial number string (e.g. "BE11529").
|
||||
Written to the file header and each record.
|
||||
path: Destination file path. Extension is not enforced — use ".MLG".
|
||||
|
||||
File layout:
|
||||
[308B header] [N × 292B records]
|
||||
|
||||
Note: The 2-byte CRC at the start of each record is written as 0x0000.
|
||||
The CRC algorithm is unknown (see module docstring).
|
||||
|
||||
Raises:
|
||||
OSError: if the file cannot be written.
|
||||
"""
|
||||
path = Path(path)
|
||||
header = _build_mlg_header(serial)
|
||||
|
||||
with open(path, "wb") as f:
|
||||
f.write(header)
|
||||
for entry in entries:
|
||||
record = _build_mlg_record(entry, serial)
|
||||
f.write(record)
|
||||
|
||||
|
||||
def read_mlg(path: Union[str, Path]) -> list[MonitorLogEntry]:
|
||||
"""
|
||||
Parse a Blastware .MLG file into a list of MonitorLogEntry objects.
|
||||
|
||||
NOT YET IMPLEMENTED.
|
||||
|
||||
Args:
|
||||
path: Path to the .MLG file.
|
||||
|
||||
Returns:
|
||||
List of MonitorLogEntry objects.
|
||||
|
||||
Raises:
|
||||
NotImplementedError: always (pending implementation).
|
||||
"""
|
||||
raise NotImplementedError("read_mlg() is not yet implemented")
|
||||
+40
-6
@@ -608,6 +608,7 @@ class MiniMateClient:
|
||||
)
|
||||
if a5_frames:
|
||||
a5_ok = True
|
||||
ev._a5_frames = a5_frames # store for write_n00
|
||||
_decode_a5_metadata_into(a5_frames, ev)
|
||||
_decode_a5_waveform(a5_frames, ev)
|
||||
log.info(
|
||||
@@ -776,6 +777,39 @@ class MiniMateClient:
|
||||
else:
|
||||
log.warning("download_waveform: waveform decode produced no samples")
|
||||
|
||||
return a5_frames
|
||||
|
||||
def save_blastware_file(self, event: "Event", path: "Union[str, Path]", serial: str) -> None:
|
||||
"""
|
||||
Download the full waveform for *event* and save it as a Blastware-
|
||||
compatible .N00 / .9T0 file at *path*.
|
||||
|
||||
This is a convenience wrapper that calls download_waveform() (which
|
||||
performs the complete SUB 5A BULK_WAVEFORM_STREAM download) and then
|
||||
calls write_n00() from blastware_file.py to encode the result.
|
||||
|
||||
Args:
|
||||
event: Event object with waveform key populated (from get_events()).
|
||||
path: Destination file path. Caller should use blastware_filename()
|
||||
to pick the correct .N00 / .9T0 extension.
|
||||
serial: Device serial number (e.g. "BE11529") — passed to
|
||||
blastware_filename() for reference, but the caller supplies
|
||||
the final path.
|
||||
"""
|
||||
from pathlib import Path as _Path
|
||||
from .blastware_file import write_n00 as _write_n00
|
||||
|
||||
a5_frames = self.download_waveform(event)
|
||||
if not a5_frames:
|
||||
raise RuntimeError(
|
||||
f"save_blastware_file: no A5 frames received for event#{event.index}"
|
||||
)
|
||||
_write_n00(event, a5_frames, path)
|
||||
log.info(
|
||||
"save_blastware_file: wrote %s (%d A5 frames)",
|
||||
path, len(a5_frames),
|
||||
)
|
||||
|
||||
# ── Write commands ────────────────────────────────────────────────────────
|
||||
|
||||
def push_config_raw(
|
||||
@@ -1324,7 +1358,7 @@ def _decode_waveform_record_into(data: bytes, event: Event) -> None:
|
||||
log.warning("waveform record project strings decode failed: %s", exc)
|
||||
|
||||
|
||||
def _decode_a5_metadata_into(frames_data: list[bytes], event: Event) -> None:
|
||||
def _decode_a5_metadata_into(frames_data: list[S3Frame], event: Event) -> None:
|
||||
"""
|
||||
Search A5 (BULK_WAVEFORM_STREAM) frame data for event-time metadata strings
|
||||
and populate event.project_info.
|
||||
@@ -1352,7 +1386,7 @@ def _decode_a5_metadata_into(frames_data: list[bytes], event: Event) -> None:
|
||||
|
||||
Modifies event in-place.
|
||||
"""
|
||||
combined = b"".join(frames_data)
|
||||
combined = b"".join(f.data for f in frames_data)
|
||||
|
||||
def _find_string_after(needle: bytes, max_len: int = 64) -> Optional[str]:
|
||||
pos = combined.find(needle)
|
||||
@@ -1376,7 +1410,7 @@ def _decode_a5_metadata_into(frames_data: list[bytes], event: Event) -> None:
|
||||
notes = _find_string_after(b"Extended Notes")
|
||||
|
||||
if not any([project, client, operator, location, notes]):
|
||||
log.debug("a5 metadata: no project strings found in %d frames", len(frames_data))
|
||||
log.debug("a5 metadata: no project strings found in %d frames (%d bytes)", len(frames_data), len(combined))
|
||||
return
|
||||
|
||||
if event.project_info is None:
|
||||
@@ -1402,7 +1436,7 @@ def _decode_a5_metadata_into(frames_data: list[bytes], event: Event) -> None:
|
||||
|
||||
|
||||
def _decode_a5_waveform(
|
||||
frames_data: list[bytes],
|
||||
frames_data: list[S3Frame],
|
||||
event: Event,
|
||||
) -> None:
|
||||
"""
|
||||
@@ -1463,7 +1497,7 @@ def _decode_a5_waveform(
|
||||
return
|
||||
|
||||
# ── Parse STRT record from A5[0] ────────────────────────────────────────
|
||||
w0 = frames_data[0][7:] # db[7:] for A5[0]
|
||||
w0 = frames_data[0].data[7:] # frame.data[7:] for A5[0]
|
||||
strt_pos = w0.find(b"STRT")
|
||||
if strt_pos < 0:
|
||||
log.warning("_decode_a5_waveform: STRT record not found in A5[0]")
|
||||
@@ -1499,7 +1533,7 @@ def _decode_a5_waveform(
|
||||
global_offset = 0
|
||||
|
||||
for fi, db in enumerate(frames_data):
|
||||
w = db[7:]
|
||||
w = db.data[7:] # frame.data[7:]
|
||||
|
||||
# A5[0]: waveform begins after the 21-byte STRT record and 6-byte preamble.
|
||||
# Layout: STRT(21B) + null-pad(2B) + 0xFF sentinel(4B) = 27 bytes total.
|
||||
|
||||
@@ -457,6 +457,11 @@ class S3Frame:
|
||||
page_lo: int # PAGE_LO from header
|
||||
data: bytes # payload data section (payload[5:], checksum already stripped)
|
||||
checksum_valid: bool
|
||||
chk_byte: int = 0 # actual checksum byte received from wire (body[-1])
|
||||
# needed for N00 file reconstruction: when the last data byte
|
||||
# is 0x10 and chk_byte ∈ {0x02, 0x03, 0x04}, the DLE+chk pair
|
||||
# must be included in the DLE-strip operation to correctly
|
||||
# reconstruct the Blastware binary body.
|
||||
|
||||
@property
|
||||
def page_key(self) -> int:
|
||||
@@ -597,4 +602,5 @@ class S3FrameParser:
|
||||
page_lo = raw_payload[4],
|
||||
data = raw_payload[5:],
|
||||
checksum_valid = (chk_received == chk_computed),
|
||||
chk_byte = chk_received,
|
||||
)
|
||||
|
||||
@@ -493,6 +493,10 @@ class Event:
|
||||
# Set by get_events(); required by download_waveform().
|
||||
_waveform_key: Optional[bytes] = field(default=None, repr=False)
|
||||
|
||||
# Raw A5 frames from the full bulk waveform download (full_waveform=True).
|
||||
# Populated by get_events() when full_waveform=True; used by write_n00().
|
||||
_a5_frames: Optional[list] = field(default=None, repr=False)
|
||||
|
||||
def __str__(self) -> str:
|
||||
ts = str(self.timestamp) if self.timestamp else "no timestamp"
|
||||
ppv = ""
|
||||
|
||||
@@ -526,7 +526,8 @@ class MiniMateProtocol:
|
||||
*,
|
||||
stop_after_metadata: bool = True,
|
||||
max_chunks: int = 32,
|
||||
) -> list[bytes]:
|
||||
include_terminator: bool = False,
|
||||
) -> list[S3Frame]:
|
||||
"""
|
||||
Download the SUB 5A (BULK_WAVEFORM_STREAM) A5 frames for one event.
|
||||
|
||||
@@ -542,7 +543,9 @@ class MiniMateProtocol:
|
||||
4. Termination (offset=_BULK_TERM_OFFSET, counter=last+_BULK_COUNTER_STEP)
|
||||
Device responds with a final A5 frame (page_key=0x0000).
|
||||
|
||||
The termination frame (page_key=0x0000) is NOT included in the returned list.
|
||||
By default the termination frame (page_key=0x0000) is NOT included in the
|
||||
returned list. Pass include_terminator=True to append it; the blastware_file
|
||||
writer needs the terminator frame's body to reconstruct the N00 footer.
|
||||
|
||||
Args:
|
||||
key4: 4-byte waveform key from EVENT_HEADER (1E).
|
||||
@@ -552,11 +555,16 @@ class MiniMateProtocol:
|
||||
hundred KB). Set False to download everything.
|
||||
max_chunks: Safety cap on the number of chunk requests sent
|
||||
(default 32; a typical event uses 9 large frames).
|
||||
include_terminator: If True, append the terminator A5 frame
|
||||
(page_key=0x0000) to the returned list. The
|
||||
terminator carries the N00 footer bytes.
|
||||
Default False preserves existing caller behaviour.
|
||||
|
||||
Returns:
|
||||
List of raw data bytes from each A5 response frame (not including
|
||||
the terminator frame). Frame indices match the request sequence:
|
||||
index 0 = probe response, index 1 = first chunk, etc.
|
||||
List of S3Frame objects from each A5 response frame. Frame indices
|
||||
match the request sequence: index 0 = probe response, index 1 = first
|
||||
chunk, etc. If include_terminator=True, the last element is the
|
||||
terminator frame (page_key=0x0000).
|
||||
|
||||
Raises:
|
||||
ProtocolError: on timeout, bad checksum, or unexpected SUB.
|
||||
@@ -571,7 +579,7 @@ class MiniMateProtocol:
|
||||
raise ValueError(f"waveform key must be 4 bytes, got {len(key4)}")
|
||||
|
||||
rsp_sub = _expected_rsp_sub(SUB_BULK_WAVEFORM) # 0xFF - 0x5A = 0xA5
|
||||
frames_data: list[bytes] = []
|
||||
frames_data: list[S3Frame] = []
|
||||
counter = 0
|
||||
|
||||
# ── Step 1: probe ────────────────────────────────────────────────────
|
||||
@@ -588,7 +596,7 @@ class MiniMateProtocol:
|
||||
key4.hex(), self._parser.bytes_fed,
|
||||
)
|
||||
raise
|
||||
frames_data.append(rsp.data)
|
||||
frames_data.append(rsp)
|
||||
log.debug("5A A5[0] page_key=0x%04X %d bytes", rsp.page_key, len(rsp.data))
|
||||
|
||||
# ── Step 2: chunk loop ───────────────────────────────────────────────
|
||||
@@ -631,9 +639,11 @@ class MiniMateProtocol:
|
||||
if rsp.page_key == 0x0000:
|
||||
# Device unexpectedly terminated mid-stream (no termination needed).
|
||||
log.debug("5A A5[%d] page_key=0x0000 — device terminated early", chunk_num)
|
||||
if include_terminator:
|
||||
frames_data.append(rsp)
|
||||
return frames_data
|
||||
|
||||
frames_data.append(rsp.data)
|
||||
frames_data.append(rsp)
|
||||
|
||||
if stop_after_metadata and b"Project:" in rsp.data:
|
||||
log.debug("5A A5[%d] metadata found — stopping early", chunk_num)
|
||||
@@ -658,6 +668,8 @@ class MiniMateProtocol:
|
||||
"5A termination response page_key=0x%04X %d bytes",
|
||||
term_rsp.page_key, len(term_rsp.data),
|
||||
)
|
||||
if include_terminator:
|
||||
frames_data.append(term_rsp)
|
||||
except TimeoutError:
|
||||
log.debug("5A no termination response — device may have already closed")
|
||||
|
||||
|
||||
@@ -61,6 +61,7 @@ from minimateplus import MiniMateClient
|
||||
from minimateplus.protocol import ProtocolError
|
||||
from minimateplus.models import CallHomeConfig, ComplianceConfig, DeviceInfo, Event, PeakValues, ProjectInfo, Timestamp
|
||||
from minimateplus.transport import TcpTransport, DEFAULT_TCP_PORT
|
||||
from minimateplus.blastware_file import write_n00, blastware_filename
|
||||
from sfm.cache import SFMCache, get_cache
|
||||
from sfm.database import SeismoDb
|
||||
|
||||
@@ -848,6 +849,82 @@ def device_event_waveform(
|
||||
return result
|
||||
|
||||
|
||||
@app.get("/device/event/{index}/blastware_file")
|
||||
def device_event_blastware_file(
|
||||
index: int,
|
||||
port: Optional[str] = Query(None, description="Serial port (e.g. COM5)"),
|
||||
baud: int = Query(38400, description="Serial baud rate"),
|
||||
host: Optional[str] = Query(None, description="TCP host — modem IP or ACH relay"),
|
||||
tcp_port: int = Query(DEFAULT_TCP_PORT, description=f"TCP port (default {DEFAULT_TCP_PORT})"),
|
||||
) -> FileResponse:
|
||||
"""
|
||||
Download the full waveform for a single event (0-based index) and return it
|
||||
as a Blastware-compatible binary file (.N00 for single-shot, .9T0 for continuous).
|
||||
|
||||
Supply either *port* (serial) or *host* (TCP/modem).
|
||||
|
||||
The file is written to a temporary path under /tmp and streamed back as a
|
||||
file download. Blastware can open it directly.
|
||||
|
||||
Performs: POLL startup → get_events(full_waveform=True, stop_after_index=index)
|
||||
→ write_n00() → FileResponse.
|
||||
"""
|
||||
log.info(
|
||||
"GET /device/event/%d/blastware_file port=%s host=%s",
|
||||
index, port, host,
|
||||
)
|
||||
|
||||
try:
|
||||
def _do():
|
||||
with _build_client(port, baud, host, tcp_port, timeout=120.0) as client:
|
||||
info = client.connect()
|
||||
events = client.get_events(full_waveform=True, stop_after_index=index)
|
||||
matching = [ev for ev in events if ev.index == index]
|
||||
return matching[0] if matching else None, info
|
||||
ev, info = _run_with_retry(_do, is_tcp=_is_tcp(host))
|
||||
except HTTPException:
|
||||
raise
|
||||
except ProtocolError as exc:
|
||||
raise HTTPException(status_code=502, detail=f"Protocol error: {exc}") from exc
|
||||
except OSError as exc:
|
||||
raise HTTPException(status_code=502, detail=f"Connection error: {exc}") from exc
|
||||
except Exception as exc:
|
||||
raise HTTPException(status_code=500, detail=f"Device error: {exc}") from exc
|
||||
|
||||
if ev is None:
|
||||
raise HTTPException(
|
||||
status_code=404,
|
||||
detail=f"Event index {index} not found on device",
|
||||
)
|
||||
|
||||
a5_frames = getattr(ev, "_a5_frames", None)
|
||||
if not a5_frames:
|
||||
raise HTTPException(
|
||||
status_code=502,
|
||||
detail=f"No waveform data received for event index {index} — 5A download failed",
|
||||
)
|
||||
|
||||
# Determine serial number from device info
|
||||
serial = getattr(info, "serial", None) or "UNKNOWN"
|
||||
|
||||
# Build filename using the same algorithm Blastware uses
|
||||
filename = blastware_filename(ev, serial)
|
||||
|
||||
# Write to /tmp so FastAPI can stream it back
|
||||
out_path = Path("/tmp") / filename
|
||||
write_n00(ev, a5_frames, out_path)
|
||||
log.info(
|
||||
"blastware_file: wrote %s (%d A5 frames, serial=%s)",
|
||||
out_path, len(a5_frames), serial,
|
||||
)
|
||||
|
||||
return FileResponse(
|
||||
path=str(out_path),
|
||||
filename=filename,
|
||||
media_type="application/octet-stream",
|
||||
)
|
||||
|
||||
|
||||
# ── Write endpoints ───────────────────────────────────────────────────────────
|
||||
|
||||
class DeviceConfigBody(BaseModel):
|
||||
|
||||
Reference in New Issue
Block a user