minimateplus/histogram_codec.py

@@ -101,6 +101,23 @@ _BLOCK_SIZE = 32
 # additional validation that we're looking at a real block.
 _BLOCK_MARKER = 10
 
+# Maximum plausible peak-count value.  Normal-range geophone tops out
+# at 10 in/s = 2000 counts at the 0.005 in/s per count scale; even
+# Sensitive range (1.25 in/s FS) wouldn't exceed ~250.  Mic counts run
+# 0..~400 in observed data.  4096 leaves comfortable headroom for any
+# legitimate value across all modes.
+#
+# Some prod blocks have been observed with peak-count fields whose
+# HIGH byte is non-zero (block[7] != 0 etc.) — observed across BE9558
+# and BE18003 units in Histogram-mode events.  Reading these as
+# uint16 LE produces values like 30981 / 41733 / 62469, which scale
+# to physically impossible peaks (150+ in/s).  Best guess: an
+# undocumented "time-of-peak-within-interval" extension byte the
+# device writes in some sub-mode (possibly Histogram+Continuous).
+# Until reverse-engineered, blocks exceeding this bound are skipped
+# rather than propagating bogus values into PVS computations.
+_MAX_PEAK_COUNT = 4096
+
 # Geo peak scaling: stored as "count × 0.005 in/s" where 1 count = one
 # 0.005 in/s display quantum.  Equivalent to the waveform codec's
 # 16-count-unit output (1 unit = 0.005 in/s = 16 ADC counts).
@@ -128,14 +145,24 @@ def _is_data_block(block: bytes) -> bool:
     return True
 
 
-def _decode_block(block: bytes) -> dict:
+def _decode_block(block: bytes) -> Optional[dict]:
     """Decode one 32-byte histogram block.  Caller must have validated
-    with ``_is_data_block`` first."""
+    with ``_is_data_block`` first.
+
+    Returns ``None`` if any peak field exceeds ``_MAX_PEAK_COUNT`` —
+    those blocks contain an undocumented extension byte format whose
+    naive uint16 LE interpretation gives physically impossible peaks.
+    Skipping the block is safer than propagating bogus values into
+    PVS computations downstream.
+    """
     # All 16-bit fields are little-endian unsigned.  Peak counts are
     # always non-negative; half-periods are always positive when valid.
     t_peak, t_halfp, v_peak, v_halfp, l_peak, l_halfp, m_peak, m_halfp = struct.unpack_from(
         "<HHHHHHHH", block, 6
     )
+    if (t_peak > _MAX_PEAK_COUNT or v_peak > _MAX_PEAK_COUNT
+            or l_peak > _MAX_PEAK_COUNT or m_peak > _MAX_PEAK_COUNT):
+        return None
     segment_id = block[1]
     block_ctr  = block[2] | (block[3] << 8)
     var_meta   = bytes(block[24:28])
@@ -158,8 +185,10 @@ def walk_body(body: bytes) -> List[dict]:
     """Walk the body and return one dict per histogram interval.
 
     Iterates 32-byte strides from offset 0.  Yields a decoded record
-    for every block that passes ``_is_data_block`` validation.  Stops
-    when the remaining bytes are too short to form a complete block.
+    for every block that passes ``_is_data_block`` validation AND has
+    plausible peak values (``_decode_block`` returns None for blocks
+    with out-of-bound peaks).  Stops when the remaining bytes are too
+    short to form a complete block.
     """
     records: List[dict] = []
     for off in range(0, len(body) - _BLOCK_SIZE + 1, _BLOCK_SIZE):
@@ -169,7 +198,13 @@ def walk_body(body: bytes) -> List[dict]:
             # Continue walking — block alignment is fixed at 32-stride
             # from offset 0, so we don't lose alignment by skipping.
             continue
-        records.append(_decode_block(blk))
+        decoded = _decode_block(blk)
+        if decoded is None:
+            # Block validated as a histogram block but had peak fields
+            # outside the plausible range — undocumented extension.
+            # Skip rather than propagating bogus PVS contributions.
+            continue
+        records.append(decoded)
     return records