SFM
Seismograph Field Module
API
Live Device
Database
Host
Port
Connect
Serial
—
Firmware
—
Sample rate
—
Record time
—
Trigger
—
Events
—
Project
—
Client
—
Operator
—
IDLE
Battery
—
Memory total
—
Memory free
—
↻ Status
▶ Start
■ Stop
Ready — enter device host and click Connect.
Device
Events
Config
Call Home
Connect to a device to view its information.
Compliance Config
Project Info
Load Waveform
◀
▶
Tran
—
Vert
—
Long
—
MicL
—
PVS
—
No waveform loaded
Recording
Recording Mode
— unchanged —
Single Shot
Continuous
Histogram
Histogram + Continuous
Sample Rate
— unchanged —
1024 sps (standard compliance)
2048 sps
4096 sps (high-speed)
Histogram Interval
— unchanged —
2 seconds
5 seconds
15 seconds
1 minute
5 minutes
15 minutes
Only active in Histogram / Histogram + Continuous mode
Record Time (seconds)
Waveform capture duration per trigger event
Trigger Level — Geo (in/s)
Recording starts when any geo channel exceeds this level
Alarm Level — Geo (in/s)
Alarm flagged when any geo channel exceeds this level
Maximum Range — Geo
— unchanged —
Normal — 10.000 in/s
Sensitive — 1.250 in/s
Geophone sensitivity (applies to Tran / Vert / Long channels)
Project Info
Project
Client
Operator
Sensor Location
Notes
Read from Device
Write to Device
Clear Form
Auto Call Home
Enable Auto Call Home
— unchanged —
Enabled
Disabled
Dial String
Read from device — not writable via this interface
When to Call
After Event Recorded
— unchanged —
Yes
No
At Specified Times
— unchanged —
Yes
No
Scheduled Call Times
Time Slot 1
— enable —
Enabled
Disabled
:
Hour (0-23) and minute (0-59). Avoid value 3 (DLE limitation).
Time Slot 2
— enable —
Enabled
Disabled
:
Hour (0-23) and minute (0-59). Avoid value 3 (DLE limitation).
Retry Settings (read-only)
Number of Retries
Time Between Retries (s)
Wait for Connection (s)
Warm-up Time (s)
Read from Device
Write to Device
Clear Form
History
Units
Monitor Log
Sessions
Serial
All units
From
To
Hide false triggers
↻ Refresh
No events found.
Timestamp
Serial
Tran (in/s)
Vert (in/s)
Long (in/s)
PVS (in/s)
Mic (dBL)
Project
Client
Type
Key
↻ Refresh
No units in database yet.
Serial
All units
From
To
↻ Refresh
No monitor log entries found.
Start Time
Stop Time
Duration
Serial
Geo Threshold
Key
Serial
All units
↻ Refresh
No ACH sessions recorded yet.
Session Time
Serial
Peer
Events DL'd
Monitor Entries
Duration (s)