serversdown b2c565f217 fix(idf_waveforms): _find_waveform_body_offset() — scans every 00 02 00 magic past offset 0x0E00, runs decode_waveform_v2 on each candidate, picks the one that returns the most samples. Validated on 483 prod IDFW files: 0 preamble-only events (was ~50%), 355/483 fully decode, 126/483 partial (BW codec walker-stops-early on loud events — known issue). ...

IDFH now synthesises a 1-sample-per-interval array from the binary intervals and writes an .h5 so the existing renderer works unchanged. Each "sample" is the per-interval peak ADC count → h5_value = count × geo_fs/32768 yields the right bar height.

2026-05-31 20:51:09 +00:00

..

__init__.py

seismo-relay v0.19.0 — device-family separation + micromate/ package

2026-05-20 15:19:49 +00:00

idf_ascii_report.py

feat: add thor report generation, pdf generation.

2026-05-29 19:03:06 +00:00

idf_file.py

fix(idf_waveforms): _find_waveform_body_offset() — scans every 00 02 00 magic past offset 0x0E00, runs decode_waveform_v2 on each candidate, picks the one that returns the most samples. Validated on 483 prod IDFW files: 0 preamble-only events (was ~50%), 355/483 fully decode, 126/483 partial (BW codec walker-stops-early on loud events — known issue).

2026-05-31 20:51:09 +00:00

idf_to_bw_report.py

feat: add thor report generation, pdf generation.

2026-05-29 19:03:06 +00:00

models.py

seismo-relay v0.19.0 — device-family separation + micromate/ package

2026-05-20 15:19:49 +00:00