- _decode_serial_number: read from data[11:] not data[:8] — was returning
the LENGTH_ECHO byte (0x0A = '\n') instead of the serial string
- _extract_peak_floats: search for channel label strings ("Tran" etc) and
read float at label+6; old step-4 aligned scan was reading trigger levels
instead of PPV values
- get_events: add debug=False param; stashes raw 210-byte record on
Event._raw_record when True for field-layout inspection
- server /device/events: add ?debug=true query param; includes
raw_record_hex + raw_record_len in response when set
- models: add Event._raw_record optional bytes field
- Establish v0.5.0 as first versioned release
- README rewritten to reflect current scope: Blastware replacement in
progress, not just a reverse-engineering capture tool
- Documents all current components: seismo_lab.py, minimateplus,
sfm/server.py, Console tab, TCP/cellular transport
- Adds ACEmanager required settings table (Quiet Mode etc.)
- Adds roadmap section
- CHANGELOG.md created with entries from v0.1.0 through v0.5.0
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
seismo_lab.py:
- Add ConsolePanel — third tab for direct device connections over serial
or TCP without the bridge subprocess
- Commands: POLL, Serial #, Full Config, Event Index (open/close per cmd)
- Colour-coded output: TX blue, RX raw teal, parsed green, errors red
- Save Log and Send to Analyzer buttons; auto-saves to bridges/captures/
- Queue/after(100) pattern — no performance impact
- Add SCRIPT_DIR to sys.path so minimateplus imports work from GUI
docs/instantel_protocol_reference.md:
- Confirm calibration year field at SUB FE payload offset 0x56–0x57
(uint16 BE): 0x07E7=2023 (BE18189), 0x07E9=2025 (BE11529)
- Document full Sierra Wireless RV50/RV55 required ACEmanager settings
(Quiet Mode, Data Forwarding Timeout, TCP Connect Response Delay, etc.)
- Correct §14.2: RV50/RV55 sends RING/CONNECT over TCP to caller even
with Quiet Mode on; parser handles by scanning for DLE+STX
- Confirm "Operating System" boot string capture via cold-start Console
- Resolve open question: 0x07E7 field = calibration year
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- bridges/tcp_serial_bridge.py: increase default boot_delay 2s → 8s to
cover MiniMate Plus cold-start time (unit wakes from RS-232 line
assertion but takes 5-10s to be ready for POLL_PROBE).
- sfm/server.py: add _run_with_retry() — on TCP connections only, retries
once on ProtocolError. Serial timeouts are not retried (usually a real
fault). Confirmed behaviour: unit wakes purely from RS-232 line voltage,
no software wake-up frame needed.
- minimateplus/transport.py: add TcpTransport — stdlib socket-based transport
with same interface as SerialTransport. Overrides read_until_idle() with
idle_gap=1.5s to absorb the modem's 1-second serial data forwarding buffer.
- minimateplus/client.py: make `port` param optional (default "") so
MiniMateClient works cleanly when a pre-built transport is injected.
- minimateplus/__init__.py: export SerialTransport and TcpTransport.
- sfm/server.py: add `host` / `tcp_port` query params to all device endpoints.
New _build_client() helper selects TCP or serial transport automatically.
OSError (connection refused, timeout) now returns HTTP 502.
- docs/instantel_protocol_reference.md: add changelog entry and full §14
(TCP/Modem Transport) documenting confirmed transparent passthrough, no ENQ
on connect, modem forwarding delay, call-up vs ACH modes, and hardware note
deprecating Raven X in favour of RV55/RX55.
Usage: GET /device/info?host=<modem_ip>&tcp_port=12345
- Implement functionality to read and parse raw_s3.bin and raw_bw.bin files.
- Define protocol constants and mappings for various command and response identifiers.
- Create data structures for frames, sessions, and diffs to facilitate analysis.
- Develop functions for annotating frames, splitting sessions, and generating reports.
- Include live mode for continuous monitoring and reporting of protocol frames.
- Add command-line interface for user interaction and configuration.
