Compare commits
57
Commits
+425
-1
@@ -4,7 +4,431 @@ All notable changes to seismo-relay are documented here.
|
||||
|
||||
---
|
||||
|
||||
## [Unreleased]
|
||||
## v0.31.0 — 2026-09-18
|
||||
|
||||
**Report parity, and a second way to rescue a runaway unit.** Two threads.
|
||||
|
||||
The first closes out Blastware Event/FFT-Report parity: the FFT, the USBM
|
||||
RI8507 compliance chart and the sensor self-check now render on the event
|
||||
report, reverse-engineered against BE12844 (MiniMate Plus) and UM (Thor)
|
||||
events. The sensor check is decoded for **both** series and standardized into
|
||||
the `.h5` (schema **v2**, a new `/sensor_check` group), so SFM serves it
|
||||
device-agnostically rather than decoding at report time. The Inspector — an
|
||||
annotated hex reader for series-3 binaries — is what made the trailing-block
|
||||
structure findable, and it earned its keep by *ruling out* a stored FFT block
|
||||
and proving Blastware computes it from the samples.
|
||||
|
||||
The second came out of a field emergency. BE12599's connector fault drove its
|
||||
Tran channel to its trigger level, so the unit recorded back-to-back and dialed
|
||||
the office ACH server every ~75 s, unreachable the whole time.
|
||||
`bridges/ach_server.py` gained `--stop-monitoring` / `--disable-ach` /
|
||||
`--rescue`, which **invert** the recovery: instead of racing a Stop into the
|
||||
gaps between dial-outs, point the modem's Destination at our own ACH server and
|
||||
answer the call. Proven in production the same night — the stop landed on the
|
||||
first call-in and held. See `docs/runbooks/wedged_unit_recovery.md`.
|
||||
|
||||
⚠ **This release owes prod a backfill** — see Migration below.
|
||||
|
||||
### Added
|
||||
- **Rescue-on-connect for `bridges/ach_server.py`** — `--stop-monitoring`
|
||||
(SUB 0x97), `--disable-ach` (SUB 0x2C read → 0x7E write → 0x7F confirm) and
|
||||
`--rescue` (both). They fire immediately after the startup handshake and
|
||||
**before** the event walk, so a unit that is recording back-to-back on a
|
||||
stuck-triggered geophone is quieted as early in the session as possible.
|
||||
Each action is independently guarded — a failure does not abort the download
|
||||
— and the outcome is written to `rescue.json` in the session directory.
|
||||
|
||||
This inverts the `docs/runbooks/wedged_unit_recovery.md` approach. That
|
||||
runbook reaches the unit *inbound* and clears the modem's Destination Address
|
||||
to stop it dialing. When the device is instead wedged mid-modem-init — ALEOS
|
||||
logs `tcpmode trying to send to invalid socket` and re-runs `Initialize Auto
|
||||
answer` every ~75 s, orphaning any held inbound session — inbound cannot win.
|
||||
Pointing the modem's Destination at an `ach_server` and letting the unit call
|
||||
*us* gives a device-initiated session the modem bridges properly.
|
||||
|
||||
⚠ Prefer `--stop-monitoring` alone on first contact. `--disable-ach` stops
|
||||
the unit calling, which is the only channel to a unit in this state; stopping
|
||||
the recording ends the call-home loop on its own when ACH is
|
||||
"after event recorded".
|
||||
|
||||
- **Blastware-compatible channel FFT (`waveform_fft`).** Reproduces Blastware's
|
||||
FFT Report: DC-removed, no window, zero-padded to 4096 (0.25 Hz bins at
|
||||
1024 sps), single-sided `2/N` amplitude. Matches Blastware's dominant
|
||||
frequency to the exact bin and the amplitude to report precision across all
|
||||
28 channels of the 7-event BE12844 oracle set. `channel_spectrum()` /
|
||||
`dominant_frequency()`; tests in `tests/test_waveform_fft.py`.
|
||||
|
||||
- **USBM RI8507 / OSMRE compliance chart on the event-report PDF
|
||||
(`sfm/compliance.py`).** The velocity-vs-frequency blasting-compliance
|
||||
scatter Blastware draws in the upper-right of its Event Report: each channel's
|
||||
significant cycles as `(frequency, peak velocity)` points (zero-crossing
|
||||
method, so each channel's cloud tops out at its PPV) plotted against the
|
||||
RI8507 Drywall (0.75 in/s) and plaster (0.50 in/s) limit curves, drawn
|
||||
continuous (constant-displacement bounds meeting the plateaus — no vertical
|
||||
steps). Sized and positioned to match a Blastware report, measured off the
|
||||
reference PDF. A technical breakdown of the curve is in
|
||||
`docs/ri8507_compliance_curve.md`.
|
||||
|
||||
- **Sensor self-check waveforms decoded and drawn — both series.** The little
|
||||
"Sensor Check" traces (geophone ring-downs — the transducer's damped impulse
|
||||
response — plus a MicL pulse train, the mic's known-signal gain check) are the
|
||||
unit's proof its sensors were healthy when it recorded the event.
|
||||
- **Series-3** (`minimateplus.sensor_check`): four records (`0x3c`–`0x3f`) in
|
||||
the binary's trailing block, same delta-block codec as the main waveform.
|
||||
Verified against all 7 BE12844 reports (mic zero-crossing = 20.1 Hz exact;
|
||||
geophone ring-downs ~7.5 Hz, overswing ~3.5).
|
||||
- **Series-4** (`micromate.sensor_check`): the same self-test in the Thor IDFW
|
||||
fixed header — four `01 0e 3c/3d/3e/3f` records (same channel ids) storing
|
||||
raw int16 traces; three-channel (mic-disabled) units carry only the three
|
||||
geophones. Validated by shape + cross-event consistency.
|
||||
- **Standardized into the `.h5`** (`/sensor_check`, schema v2): each series'
|
||||
decoder attaches the traces to the event at decode, the writer persists
|
||||
them, and `gather_report_data` reads them back — so SFM renders the strip
|
||||
(flush against the waveform panel) plus the **Sensor Check → Frequency /
|
||||
Overswing Ratio** sub-rows without knowing the source instrument.
|
||||
- Tests: `tests/test_sensor_check.py`, `tests/test_sensor_check_idf.py`,
|
||||
`tests/test_event_hdf5_sensor_check.py`.
|
||||
|
||||
- **Inspector tab in `seismo_lab.py` — annotated hex reader for series-3
|
||||
binaries (`minimateplus/binary_annotate.py`).** Tiles a raw Blastware file
|
||||
into labeled spans (header / STRT / body record-chain / trailing metadata +
|
||||
calibration + sensor-check records / footer) so a binary can be combed by eye.
|
||||
|
||||
### Fixed
|
||||
- **Event-report waveform panel — stacked-lane y-tick collision.** The lanes
|
||||
touch, so each lane's bottom `-1.0` overprinted the next lane's top `1.0` at
|
||||
the shared boundary. Prune the extreme ticks so each lane shows clean interior
|
||||
ticks only.
|
||||
- **Event-report header — serial+firmware line ran off the page.** The long
|
||||
`BE##### V ##.##-#.## MiniMate Plus` string overflowed the right margin;
|
||||
tighter right-column indent + BW's slightly smaller header size so it fits.
|
||||
|
||||
---
|
||||
|
||||
### Migration
|
||||
|
||||
⚠ **The sensor-check needs a backfill.** Existing `.h5` files are schema v1
|
||||
and carry no `/sensor_check` group, so their reports show no sensor-check strip
|
||||
until regenerated. `TOOL_VERSION` is bumped to **0.31.0**, so the standard
|
||||
backfill regenerates every event and picks up the traces with **no `--force`**:
|
||||
`scripts/backfill_thor_events.py` for series-4 (it already owed a v0.30.0 Thor
|
||||
backfill — this rides along) and the series-3 sidecar/shape backfill for
|
||||
MiniMate events. Purely additive — no decoded value changes, and v1 `.h5`
|
||||
files read fine until then (empty strip). DB backup first, as always.
|
||||
|
||||
⚠ Budget **~2 h on the NAS** — ~1.5 files/sec there versus ~85/sec on the dev
|
||||
box (gzip-4 in `sfm/event_hdf5.py` against a Synology CPU).
|
||||
|
||||
Everything else in this release owes nothing: the FFT, the USBM compliance
|
||||
chart and the `ach_server` rescue flags are additive and read data already on
|
||||
disk — no schema change, no DB migration.
|
||||
|
||||
---
|
||||
|
||||
## v0.30.0 — 2026-09-12
|
||||
|
||||
**The series-4 correctness release** — the Thor / Micromate counterpart to
|
||||
v0.26.0's series-3 work. The decoder is now verified per-sample against
|
||||
Thor's own CSV exports: **459 waveform files, 3,807,158 / 3,807,165 samples
|
||||
exact** across three independent ground-truth corpora, and production IDFW is
|
||||
**575/575** with zero truncations and zero decode failures. Series-3
|
||||
re-verified **unchanged at 14,338/14,338** after every shared-codec change.
|
||||
|
||||
⚠ **This release owes the prod store a Thor backfill.** Every stored
|
||||
series-4 geophone value is **3.3% low**, and histogram peaks from monitoring
|
||||
runs longer than ~4 hours can be far worse (the interval cap discarded the
|
||||
tail, frequently the part holding the peak). Run
|
||||
`scripts/backfill_thor_events.py` — `TOOL_VERSION` is bumped to `0.30.0`, so
|
||||
regeneration is gated correctly and **no `--force` is needed**. DB backup
|
||||
first. Series-3 events are untouched by this release and do not need
|
||||
re-running.
|
||||
|
||||
⚠ **Terra-View displays these values.** Series-4 geophone readings will rise
|
||||
~3.3% after the backfill, and some histogram PPVs will rise a great deal more.
|
||||
That is a correction, not a regression.
|
||||
|
||||
|
||||
### Fixed — event-report PDF used a per-trace geo Y scale
|
||||
|
||||
The waveform plot scaled each geo lane to its own peak, so a small channel
|
||||
filled its lane and looked as large as a big one, and the `Geo: X in/s/div`
|
||||
footer reflected only whichever channel was measured first — wrong for the
|
||||
other two. All three geo lanes now share one symmetric scale (max |sample|
|
||||
across them, padded, 0.05 in/s floor), matching the event modal and BW's
|
||||
single amp/div; the footer reflects that shared scale. Mic keeps its own psi
|
||||
scale. Large events are unchanged.
|
||||
|
||||
### Fixed — series-4 (Thor / Micromate) decoder is now per-sample exact
|
||||
|
||||
Verified against **Thor's own CSV exports**, which carry a per-sample
|
||||
four-column block beside every binary (`CSV/<name>.IDFW.csv`) — 1,012 paired
|
||||
files that had been sitting in the corpus unused. Previous notes asserted
|
||||
"Thor has no ASCII ground truth", which is why the decoder stayed pinned to a
|
||||
superseded walker with an unverifiable scale factor.
|
||||
|
||||
| metric | before | after |
|
||||
|---|---|---|
|
||||
| IDFW per-sample exact | 39.1% | **100.000%** (1,057,536/1,057,536) |
|
||||
| IDFW files fully exact | 0/153 | **153/153** |
|
||||
| IDFW PPV median error | −3.32% | **−0.002%** |
|
||||
| IDFH within 2% of Thor PPV | 51.1% | **100.0%** (858/858) |
|
||||
| prod IDFW PPV median error (8 units) | −3.3% | **−0.001%** |
|
||||
| decode cost | — | 6 ms/file |
|
||||
|
||||
Four independent root causes:
|
||||
|
||||
- **Geo LSB was `0.0003`, should be `0.000310308`** — the old value was Thor's
|
||||
4-decimal *display rounding* of the LSB mistaken for the LSB, so every
|
||||
series-4 geophone sample read **3.3% low**. Pinned to ±6e-11 by
|
||||
intersecting 991,415 rounding constraints; corroborated by the ±full-scale
|
||||
seed (`±32226`) in unwritten IDFH slots. Applies to IDFH too, which had a
|
||||
separate (also wrong) `10.0/32768`.
|
||||
- **IDFH histograms were capped at 250 intervals** — the segment validator
|
||||
required the interval counter's high byte to be zero, but the counter is a
|
||||
uint16 cumulative index, so every segment past interval 255 was rejected.
|
||||
Any run over ~4 hours lost its tail, often the part holding the peak.
|
||||
540/858 corpus files affected.
|
||||
- **Record mode `00 00` (raw int16, 10-byte header) was unhandled** — the
|
||||
record fell through the dispatch, silently dropping each channel's first
|
||||
512 samples. This produced the long-standing "loud events truncate"
|
||||
symptom. `MODE_ABSOLUTE` is now also accepted as a segment-0 preamble.
|
||||
- **Body-offset search matched `00 02 00` inside record headers** — picking a
|
||||
candidate part-way down the chain, which decodes a rotation-shifted body
|
||||
that drops each channel's segment 0. The search now anchors on record
|
||||
headers and takes the chain head.
|
||||
|
||||
Also fixes the separately-tracked "UM-series decodes ~1000× low" bug
|
||||
(`UM11402_20260406130113.IDFW` now matches its device report exactly).
|
||||
|
||||
Series-3 re-verified **unchanged at 14,338/14,338 exact** after the shared
|
||||
`waveform_codec` change.
|
||||
|
||||
⚠ **This is a codec change: the Thor store owes a regeneration.** Run
|
||||
`scripts/backfill_thor_events.py` (bump `TOOL_VERSION` first, or pass
|
||||
`--force`), DB backup first. All stored series-4 `.h5`/sidecar peaks are
|
||||
currently ~3.3% low, and histogram peaks for runs over ~4 hours may be
|
||||
badly low.
|
||||
|
||||
⚠ **Thor's histogram PPV has a 0.0050 in/s display floor** — 41.4% of prod
|
||||
IDFH sidecars report a component PPV larger than their own vector sum. On
|
||||
quiet files the decoder is now *more* accurate than that reference.
|
||||
|
||||
New: `scratch/verify_thor_against_csv.py`, `tests/test_idf_binary_codec.py`
|
||||
(10 tests, fixtures under `tests/fixtures/thor-idf/`).
|
||||
|
||||
### Fixed — mic-disabled (3-channel) units
|
||||
|
||||
Verified on a second corpus (`9-10-26-csv-req`: UM11402, UM12947, UM20147) —
|
||||
**139/139 waveforms per-sample exact (1,273,380 samples), 877/877 histograms
|
||||
within 2%** (was 66.9% and 56.6%).
|
||||
|
||||
- **Waveform body head sat below the scan floor.** A 3-channel unit's shorter
|
||||
header puts the record chain head at `0x0dba`, under the old
|
||||
`_BODY_SCAN_FLOOR` of `0x0E00`. The scan couldn't see it and fell through
|
||||
to the Vert segment-0 record, decoding a body shifted one position around
|
||||
the channel rotation — Vert came up exactly 512 samples short. Floor
|
||||
lowered to `0x0C00`; body-offset scoring now accepts 3 channels as "equal"
|
||||
instead of demanding 4.
|
||||
- **Histogram interval record is 56 bytes, not 72.** It is
|
||||
`16 × n_channels + 8`, so mic-disabled units pack 56. Assuming 72 read 7
|
||||
intervals out of every 10-interval segment then walked off alignment into
|
||||
garbage decoding as ~10 in/s peaks (errors up to +191,000%). The interval
|
||||
count now comes from the segment's cumulative counter and the stride is
|
||||
derived from it; also recovers 4 files that decoded no intervals at all.
|
||||
|
||||
Combined across both corpora: **292/292 waveform files, 2,330,916/2,330,916
|
||||
samples exact.** Production IDFW truncations 41 → 22.
|
||||
|
||||
### Fixed — `40 NN` int16 blocks with NN > 8
|
||||
|
||||
`data_block_len()` rejected any `40 NN` block with `NN > 0x08`. The cap had
|
||||
no evidence behind it: every corpus available when it was written used only
|
||||
NN ∈ {1,2,3,4,8}, so it was never exercised. Loud UM12947 events use NN of
|
||||
12, 16, 20 … up to 196, and because the block walker stops at the first
|
||||
unrecognised tag rather than raising, rejecting them surfaced as **silently
|
||||
short channels** (e.g. Tran 1812 / Vert 2132 / Long 2324 on a file whose
|
||||
export has 2324 for all three). The bound is the buffer, not a constant.
|
||||
|
||||
Verified against Thor exports for UM12947 (2025-07-14 … 09-25, 167
|
||||
waveforms): length mismatches **22 → 0**, **1,476,242/1,476,249** samples
|
||||
exact. These are not truncated recordings — the exports carry full sample
|
||||
counts.
|
||||
|
||||
`tests/test_waveform_codec.py` asserted the cap as intended behaviour; that
|
||||
assertion was wrong and has been replaced with one pinning the opposite,
|
||||
carrying the evidence.
|
||||
|
||||
### Result across all three ground-truth corpora
|
||||
|
||||
**459 waveform files, 3,807,158 / 3,807,165 samples exact.** Production
|
||||
IDFW: **575/575**, zero truncations, zero decode failures, median PPV error
|
||||
−0.0007% across 8 units. Series-3 re-verified **unchanged at 14,338/14,338**
|
||||
after every shared-codec change.
|
||||
|
||||
The 7 residual samples each differ by one 4th-decimal tick and are **Thor's
|
||||
own rounding**: intersecting the per-sample rounding constraints over that
|
||||
corpus is infeasible (the binding pair contradict by 2.3e-11, 7e-5 relative),
|
||||
so no single linear LSB reproduces every printed value. `_GEO_LSB_IPS` is
|
||||
already pinned to ~1e-11 — do not retune it to chase these.
|
||||
|
||||
---
|
||||
|
||||
## v0.29.0 — 2026-09-04
|
||||
|
||||
First release to reach prod since **v0.27.0**, so it ships **both** the
|
||||
`false_trigger_reason` column below *and* the v0.28.0 offset (DC-baseline)
|
||||
detector: v0.28.0 was version-bumped in-tree (`TOOL_VERSION`, CHANGELOG) but
|
||||
never tagged or deployed, so 0.29.0 is the first build to carry either to prod.
|
||||
Pairs with Terra-View ≥ 0.24.0. The `false_trigger_reason` column auto-migrates
|
||||
on startup; the offset detector still needs the shape backfill on the prod store
|
||||
(`scripts/backfill_event_shape.py`) to populate `shape_offset*` on existing rows.
|
||||
|
||||
### Added
|
||||
- **`events.false_trigger_reason` — optional FT cause.** A nullable `TEXT`
|
||||
column recording *why* an event is a false trigger (e.g. `"offset"`), as a
|
||||
subtype of the FT flag: setting a reason via the sidecar review PATCH implies
|
||||
`false_trigger=1`, and the reason is cleared whenever FT ends up 0
|
||||
(confirm-real, clear-FT, `set_false_trigger(false)`). `propagate_review_to_twins`
|
||||
carries the reason to the histogram/waveform twin alongside the flag.
|
||||
Auto-migrated (`_SCHEMA` + `_migrate` ADD COLUMN — not the Migration-1
|
||||
rebuild); exposed via `/db/events`. Terra-View surfaces it as a manual
|
||||
"Flag as offset" action + an `FT · offset` badge.
|
||||
|
||||
### Fixed
|
||||
- **BlastMate serials — the family prefix is read from the file, not guessed.**
|
||||
The Blastware filename encodes only the serial *number* (`L895…` → 10895);
|
||||
the two-letter prefix is not in it. `waveform_store` synthesised `"BE"`, so
|
||||
an imported **BlastMate** (serials `BA…`) was filed under a MiniMate Plus
|
||||
serial that does not exist — silently, and Terra-View read it straight
|
||||
through. `save_imported_bw` now resolves serial as hint → file body →
|
||||
filename guess, via a new `_serial_from_bw_bytes` that accepts a candidate
|
||||
only when its numeric part matches the filename. `client._decode_0a_partial_header`
|
||||
likewise matched a literal `b"BE"` in monitor-log partial records; on a
|
||||
BlastMate that returned −1 and skipped the whole block, losing the **geo
|
||||
threshold** along with the serial. It now matches any two-letter prefix and
|
||||
requires the NUL terminator — stricter than the search it replaces.
|
||||
|
||||
BlastMate is the MiniMate Plus's larger Series III sibling and its files are
|
||||
byte-compatible: all 1,493 in the DL2 archive decode through the existing
|
||||
codec at 100%, same four channels. **The serial string was the only thing
|
||||
blocking BlastMate support in SFM.** Four archive units were affected —
|
||||
BA9229, BA10060, BA10895, BA15957.
|
||||
|
||||
**No backfill and no `TOOL_VERSION` bump**: this changes which serial an
|
||||
*import* is filed under, not any decoded value, so existing sidecars and
|
||||
`.h5` files are untouched. **No migration either** — prod holds no BlastMate
|
||||
events (the archive's BA units last recorded 2018-10 through 2023-11; the
|
||||
prod backfill reaches back only to ~May 2025).
|
||||
|
||||
---
|
||||
|
||||
## v0.28.0 — 2026-09-02
|
||||
|
||||
**Offset (DC-baseline) false-trigger detector.** Productionizes the validated
|
||||
pre-trigger detector: a geophone event whose baseline sits off zero and stays
|
||||
flat across the record (sensor bumped / settled / drifted) is now flagged and
|
||||
surfaced in Terra-View as an `offset` false-trigger reason — catching offsets the
|
||||
crest/near-peak spike rule misses (an offset is low-crest and flat).
|
||||
|
||||
### Added
|
||||
- `shape_metrics.offset_from_samples` / `offset_from_h5`: per geophone channel,
|
||||
`|median(pre-trigger)| ≥ 0.025 in/s` AND `pre/mid/end spread ≤ 0.02` → offset;
|
||||
the consistency test rejects transients (a real event moves one third). Reads
|
||||
the `.h5` samples + the `pretrig_samples` attr, range-aware via the in/s float
|
||||
samples. Constants `OFFSET_FLOOR` / `OFFSET_MAX_SPREAD` are tunable.
|
||||
- `events.shape_offset` / `shape_offset_axis` / `shape_offset_pre` /
|
||||
`shape_offset_spread` columns (auto-migrated: `_SCHEMA` + the `_migrate`
|
||||
ADD COLUMN loop), computed at all three ingest paths and by
|
||||
`backfill_event_shape.py`, exposed via `/db/events`.
|
||||
|
||||
Requires the shape/offset backfill on the prod store to populate existing events:
|
||||
`python scripts/backfill_event_shape.py --db-path … --store-root …`.
|
||||
|
||||
---
|
||||
|
||||
## v0.27.0 — 2026-08-28
|
||||
|
||||
**Per-sample decoder verification at scale, plus the offset investigation.**
|
||||
The series-3 codec is now verified sample-by-sample against **14,338** preserved
|
||||
Blastware ASCII exports — 1,249 waveform and 13,089 histogram, spanning 45 units
|
||||
and files back to 2018. That is 11x the ground truth the production store
|
||||
carried, and it found one real codec bug (below).
|
||||
|
||||
### Fixed
|
||||
- **Sub-minute histograms with a partial final block decoded to nothing**
|
||||
(`histogram_codec.detect_multi_interval_stride`). The stride search confirmed
|
||||
itself on a third block header whenever the body was long enough to hold one —
|
||||
but a body can exceed two strides and still contain only two real blocks, because
|
||||
a *partial* final block leaves trailing padding. BE18193 `T193L0XM.CI0H` (51
|
||||
intervals at 2 s = one full 30-interval block plus a 21-interval remainder, in a
|
||||
2787-byte body) therefore had its correct stride of 612 discarded and produced an
|
||||
empty decode. A missing third header now means end-of-stream rather than
|
||||
disqualification; the block-counter check, which is what actually prevents the
|
||||
false positives that once mis-dispatched 9,082 files, is unchanged.
|
||||
|
||||
Found by decoding the full DL2 archive against its preserved Blastware ASCII
|
||||
exports. Across **63,535 unique** histogram binaries the fix recovers **4 files** —
|
||||
`K440HJCN.3C0H` and `K557IF1U.8K0H` (stride 252), `T191HVNP.0S0H` (92) and
|
||||
`T193L0XM.CI0H` (612) — with **zero** files regressed. Verification over all
|
||||
14,340 archive pairs goes 14,337 → 14,338 exact, the only remainder being two
|
||||
series-4 IDF files that belong to a different codec.
|
||||
|
||||
(The DL2 export keeps a byte-identical `Sent/` mirror of its root, so a naive
|
||||
walk double-counts every binary — 127,035 paths are 63,535 distinct files. The
|
||||
ASCII exports are *not* mirrored, so the 14,340 pair count is already distinct.)
|
||||
|
||||
**No prod backfill is required for this.** Verified after the fact: all four
|
||||
recovered files are archive-only — none exists in the production store or the
|
||||
events DB — and re-running stride detection over the production store's
|
||||
**10,215** histogram binaries shows **0 files whose decode changes**. The fix
|
||||
matters for future ingests of sub-minute histograms with a partial final block,
|
||||
not for anything already stored.
|
||||
|
||||
(`TOOL_VERSION` moves with the release, so whenever a backfill *is* next run for
|
||||
some other reason it will regenerate the whole store rather than skipping. That
|
||||
is harmless — the output is byte-identical for every currently-stored file — but
|
||||
it means the run takes its full ~2 hours on the NAS.)
|
||||
|
||||
- **Histogram/waveform twin matching is now interval-based** (`find_twins`). A real
|
||||
trigger is recorded twice — as a triggered waveform (stamped at the trigger instant)
|
||||
and inside the scheduled histogram whose interval contains it (stamped at the 7am/7pm
|
||||
interval start) — so the two twins can be **hours apart**. The old ±5-minute window
|
||||
silently missed them, which broke review propagation (flagging one twin didn't flag its
|
||||
twin). Twins are now matched by same serial + identical `peak_vector_sum` + opposite
|
||||
record type + the waveform falling within the histogram's interval (bounded by the next
|
||||
same-serial histogram). `window_seconds` is retained but ignored. Fixes terra-view #102
|
||||
sub-task 2.
|
||||
|
||||
- **`/health` reported a hard-coded `0.1.0`** instead of the real service version.
|
||||
`sfm/server.py` now derives its version from `minimateplus.event_file_io.TOOL_VERSION`,
|
||||
making that constant the single source of truth for the service version and the
|
||||
sidecar stamp alike — one place to bump at release.
|
||||
|
||||
- **`CLAUDE.md` had 793 NUL bytes appended** after its last line, which made `grep`
|
||||
treat the file as binary and silently skip it. Present since at least v0.21.0.
|
||||
Stripped.
|
||||
|
||||
### Added
|
||||
- **`docs/offset_investigation.md`** — a dated journal of the "offset" hardware
|
||||
fault: base rate, detector design, per-unit case files, ruled-out hypotheses
|
||||
(each kept with the evidence that killed it), and Instantel's own autozero
|
||||
procedure with its 2027–2069 acceptance window.
|
||||
- **`scratch/verify_against_ascii.py`** — decodes a corpus of BW binaries and
|
||||
diffs every sample against the paired `_ASCII.TXT`. Includes a saturation
|
||||
carve-out: BW clamps clipped events to the range maximum and writes `OORANGE`,
|
||||
while the decoder faithfully reports counts past nominal full scale.
|
||||
- **`scratch/offset_scan3.py`** — offset detector. Measures the resting floor in
|
||||
the *pre-trigger* window (definitionally quiet) and requires it to hold across
|
||||
pre / middle / end. Result: **5 of 45 units (11%)**, stable across a 2x
|
||||
threshold range. Supersedes `offset_scan.py` and `offset_scan2.py`, both kept
|
||||
as the reasoning trail.
|
||||
|
||||
### Verified
|
||||
- **19,244 healthy channel-events sit at a pre-trigger floor of exactly 0.000
|
||||
(62.7%), 94.5% within ±1 quantisation unit, median +0.0000.** No systematic
|
||||
zero-point bias in the decoder — an independent confirmation of the
|
||||
32000-count geo full scale, arrived at from a different direction than the
|
||||
ASCII sample comparisons.
|
||||
|
||||
---
|
||||
|
||||
|
||||
@@ -2,39 +2,152 @@
|
||||
|
||||
Ground-up Python replacement for **Blastware**, Instantel's Windows-only software for
|
||||
managing MiniMate Plus seismographs. Connects over direct RS-232 or cellular modem
|
||||
(Sierra Wireless RV50 / RV55). Current version: **v0.26.0**.
|
||||
(Sierra Wireless RV50 / RV55). Current version: **v0.31.0**.
|
||||
|
||||
Stack-level context — which repo owns what, and how the three project versions
|
||||
pair — lives in `../terra-view/docs/tmi-stack.md`, which is also loaded as
|
||||
`~/CLAUDE.md`.
|
||||
|
||||
---
|
||||
|
||||
## Where things stand (updated 2026-08-27)
|
||||
## Where things stand (updated 2026-08-28)
|
||||
|
||||
Read this first when picking the project back up.
|
||||
|
||||
- **Series-3 decode is correct and verified.** All 11,603 series-3 binaries in
|
||||
the prod snapshot pass every check (channel lengths, peaks vs the device's
|
||||
own reported PPV, nothing above full scale, length vs declared record time).
|
||||
Ground truth: 1,211/1,211 histograms exact per-interval and 75/75 waveform
|
||||
sample counts exact against preserved Blastware ASCII exports.
|
||||
⚠ That is per-sample proof on 11% of files and peak-only consistency on the
|
||||
other 89% — see `docs/instantel_protocol_reference.md` §7.6.1.
|
||||
- **Series-4 (Thor / Micromate) is NOT verified.** UM-series sits at ~48%
|
||||
against device peaks with a ~1.7% systematic bias and a near-zero tail.
|
||||
Thor IDFW is pinned to `decode_waveform_legacy` deliberately.
|
||||
- **Series-3 decode is verified per-sample at scale (v0.27.0).** The full DL2
|
||||
archive decodes **14,338 / 14,338** paired files exactly against their
|
||||
preserved Blastware ASCII exports — 1,249 waveform + 13,089 histogram, 45
|
||||
units, files back to 2018. That is 11x the ground truth the prod store
|
||||
carried, and it supersedes the old "per-sample on 11%, peak-only on 89%"
|
||||
caveat. Harness: `scratch/verify_against_ascii.py` (note its saturation
|
||||
carve-out — BW clamps clipped events, the decoder reports true counts).
|
||||
Independent corroboration of the 32000-count scale: 19,244 healthy
|
||||
channel-events sit at a pre-trigger floor of exactly 0.000 (62.7%), 94.5%
|
||||
within ±1 quantisation unit, median +0.0000 — no zero-point bias.
|
||||
- **Series-4 (Thor / Micromate) is now verified per-sample (2026-09-10).**
|
||||
**1,057,536 / 1,057,536** geo samples across all 153 genuine Thor waveform
|
||||
files reproduce Thor's own CSV export exactly; IDFH peaks are within 2% on
|
||||
858/858 (median -0.004%). The ground truth was in the corpus all along —
|
||||
Thor writes `CSV/<name>.IDFW.csv` beside each binary with a **per-sample**
|
||||
four-column block. Harness: `scratch/verify_thor_against_csv.py`.
|
||||
Four bugs, all fixed: geo LSB was `0.0003` (display rounding of the real
|
||||
`0.000310308`, so every sample read **3.3% low**); the IDFH segment
|
||||
validator required a zero counter high byte, **capping every histogram at
|
||||
250 intervals**; record mode `00 00` (raw int16) was unhandled, silently
|
||||
dropping each channel's first 512 samples; and the body-offset search
|
||||
matched `00 02 00` *inside* record headers, decoding a rotation-shifted
|
||||
body. IDFW is no longer pinned to `decode_waveform_legacy`.
|
||||
Series-3 re-verified unchanged at 14,338/14,338 after the shared-codec
|
||||
change.
|
||||
- **Mic-disabled (3-channel) units are a distinct shape (2026-09-10).**
|
||||
Verified on a second corpus (`~/thor-csv-req`, UM11402/UM12947/UM20147):
|
||||
**139/139** waveforms per-sample exact, **877/877** histograms within 2%.
|
||||
Two structural differences: the shorter header puts the waveform record
|
||||
chain head at `0x0dba` (below the old `_BODY_SCAN_FLOOR` of `0x0E00`, so it
|
||||
was invisible and Vert came up exactly 512 short), and the histogram
|
||||
interval record is **56 bytes, not 72** — `16 × n_channels + 8`, derived per
|
||||
segment from the cumulative interval counter, never assumed.
|
||||
- **`40 NN` blocks are not capped at NN=8 (2026-09-11).** `data_block_len()`
|
||||
rejected `NN > 0x08`, a guard with no evidence behind it — the corpora
|
||||
available when it was written only used NN ∈ {1,2,3,4,8}. Loud UM12947
|
||||
events use NN up to 196, and since the walker stops at the first
|
||||
unrecognised tag rather than raising, this surfaced as silently short
|
||||
channels. Verified on 167 UM12947 waveforms: length mismatches 22 → 0,
|
||||
1,476,242/1,476,249 samples exact.
|
||||
- **Production IDFW is now 575/575** — zero truncations, zero decode
|
||||
failures, median PPV error −0.0007% across 8 units (was 41 truncated + 1
|
||||
failing, −3.3%). Across all three ground-truth corpora: **459 files,
|
||||
3,807,158/3,807,165 samples exact**; the 7 stragglers differ by one
|
||||
4th-decimal tick and are Thor's own rounding — no single linear LSB can
|
||||
reproduce every printed value (the constraints are infeasible by 7e-5
|
||||
relative), so do NOT retune `_GEO_LSB_IPS`.
|
||||
- **⚠ KNOWN BUG — the 5A walk breaks once a unit's buffer crosses 64 KB.**
|
||||
`parse_strt_end_offset()` returns only `(end_key[2] << 8) | end_key[3]`,
|
||||
discarding the key's page byte. An event starting at `0x0111F2A2` and ending
|
||||
at `0x0112_1010` therefore reads `end_offset = 0x1010` — *behind* its own
|
||||
start. The chunk loop then exits before fetching anything and TERM computes
|
||||
a negative `offset_word`, which `struct.pack(">H", ...)` rejects: the
|
||||
`/device/events` walk 500s. Reproduced on BE12599 (2026-09-19), which had
|
||||
78 KB stored and had rolled into page `0x12`.
|
||||
**Why it hid so long:** every 5A capture the walk was verified against came
|
||||
from a freshly-erased BE11529 — all three confirmed TERM examples in
|
||||
`framing.py` (`0x1ABE`, `0x21F2`, `0x417E`) sit inside page `0x11`. Prod is
|
||||
unaffected: it ingests complete files via BW ACH, never this walk.
|
||||
**Fixing it has two layers** — the arithmetic (`if end < start: end +=
|
||||
0x10000`) stops the crash and bounds the loop correctly; carrying the page
|
||||
byte through the chunk requests (`params[1]` 0x11 -> 0x12, counter rolling
|
||||
over) needs a BW capture of a spanning event first. Do not ship layer one
|
||||
alone without a loud truncation warning — a silently short event is the
|
||||
failure mode this codec has been bitten by repeatedly.
|
||||
- **Open, not blocking:** 14 sensitive-range files show an exact 8x
|
||||
(= 10.0/1.25) units discrepancy; `scripts/backfill_sidecars.py --force` also
|
||||
inserts DB rows for store files that have none (one-time per store) and the
|
||||
dry-run does not report that count.
|
||||
- **After any codec change, regenerate the store** — `backfill_sidecars.py
|
||||
--force` then `backfill_event_shape.py`, DB backup first. Stored `.h5` files
|
||||
do not update themselves.
|
||||
- **Parked:** the "offset" hardware-fault investigation (Appendix E of the
|
||||
protocol reference) pending the multi-year BW archive.
|
||||
- **After any codec change, regenerate the store** — `backfill_sidecars.py`
|
||||
then `backfill_event_shape.py`, DB backup first. Stored `.h5` files do not
|
||||
update themselves. No `--force` needed as long as `TOOL_VERSION` was bumped
|
||||
(it gates regeneration). ⚠ On the office NAS this takes **~2 hours**
|
||||
(~1.5 files/sec vs 85/sec on the dev box — gzip-4 in `sfm/event_hdf5.py`
|
||||
against a Synology CPU). Budget it up front.
|
||||
**v0.27.0 does NOT owe prod a backfill** — verified: the partial-final-block
|
||||
fix changes 0 of the 10,215 histograms in the prod store (the 4 recovered
|
||||
files are archive-only and were never ingested).
|
||||
- **The "offset" hardware fault has its own journal** --
|
||||
`docs/offset_investigation.md`. **5 of 45 units (11%)**, and the fault is
|
||||
**persistent** — it stays until the geophone is serviced. Detect it with
|
||||
`scratch/offset_scan3.py`: the resting floor in the **pre-trigger** window,
|
||||
required to hold across pre/middle/end. Never score only the dominant-peak
|
||||
axis and never use the mean — both produce false recoveries (see the
|
||||
retraction banner in the journal). Instantel's autozero procedure and its
|
||||
2027-2069 acceptance window are recorded there too. Best open lead is
|
||||
`SUB 0x0E` (unimplemented), which may carry those very numbers.
|
||||
|
||||
|
||||
When new information about the protocol is discovered, please update the instantel_protocol_reference.md with the findings in addition to this document
|
||||
|
||||
---
|
||||
|
||||
## Changelog & release convention
|
||||
|
||||
**Feature branches do NOT touch `CHANGELOG.md`. Write the entry on `dev`, as
|
||||
part of finishing the merge, under `## Unreleased`. Cut the version on `dev` in a
|
||||
dedicated release commit when you are ready to ship to `main`.**
|
||||
|
||||
- **The changelog is written on `dev`, never on a feature branch.** With
|
||||
several branches in flight they all edit the same few lines at the top of
|
||||
the file and conflict every time. Writing it once, after the merge, also
|
||||
lets it describe what actually *landed* — including anything that changed
|
||||
during conflict resolution.
|
||||
- ⚠ **The merge is not finished until `## Unreleased` is updated.** Same sitting,
|
||||
not "later" — that is the one failure mode of writing it after the fact.
|
||||
Reconstruct from the branch's own commit messages:
|
||||
`git log --oneline dev..<branch>` before you merge, or
|
||||
`git log --oneline <merge-base>..<branch>` after.
|
||||
- **No preamble under `## Unreleased`** — just the `### Added` / `### Changed` /
|
||||
`### Fixed` lists. The themed opening paragraph gets written at release
|
||||
time, when the whole release is visible and can be named honestly. A theme
|
||||
written when the first item landed is stale by the third.
|
||||
- ⚠ **State the operational consequence** on any entry touching the codec, the
|
||||
waveform store, or the DB — **including when it is "none."** "requires
|
||||
`backfill_sidecars.py` + `backfill_event_shape.py`, ~2 h on the NAS",
|
||||
"`TOOL_VERSION` bumped", "no schema change, no migration". Silence is
|
||||
ambiguous; "none" is information. This repo's changelog is how future-you
|
||||
learns whether a deploy costs two hours.
|
||||
- **Releases are cut on judgement, not on a schedule or a merge.** `Unreleased`
|
||||
is the staging area for whatever is going into the next release; when enough
|
||||
has accumulated to be worth shipping, it gets a number and a date. Nothing
|
||||
about a merge to `dev` triggers a release.
|
||||
- **Cutting a release** is its own `chore(release): vX.Y.Z — <theme>` commit on
|
||||
`dev`, renaming `## Unreleased` → `## vX.Y.Z — YYYY-MM-DD` and touching:
|
||||
`CHANGELOG.md`, `pyproject.toml`, the version line in `CLAUDE.md` and
|
||||
`README.md`, and `minimateplus/event_file_io.py` (`TOOL_VERSION`) **when the
|
||||
codec changed** — that constant gates `.h5` regeneration.
|
||||
- **`main` carries only released versions.** No `## Unreleased` section there;
|
||||
it lands via the `dev` → `main` PR. `main` lagging `dev` by a version is
|
||||
normal.
|
||||
|
||||
---
|
||||
|
||||
## Architecture: three-tier conceptual model
|
||||
|
||||
seismo-relay is a **suite of cooperating components**, not a single app.
|
||||
@@ -100,20 +213,34 @@ should not import from `sfm/`, must not touch a DB, and have no I/O
|
||||
beyond reading files passed as arguments. Keep them pure — both
|
||||
tiers can then depend on them without circularity.
|
||||
|
||||
#### Thor IDF binary codec (2026-05-28)
|
||||
#### Thor IDF binary codec (updated 2026-09-10)
|
||||
|
||||
`micromate/idf_file.read_idf_file()` decodes both Thor IDFW
|
||||
(waveform) and IDFH (histogram) binaries.
|
||||
(waveform) and IDFH (histogram) binaries. **Verified per-sample
|
||||
against Thor's own CSV exports** — see
|
||||
`scratch/verify_thor_against_csv.py`.
|
||||
|
||||
- **IDFW** reuses `decode_waveform_v2()` on the body at fixed file
|
||||
offset `0x0f1f`. Sample fidelity is 87–99% byte-exact on quiet
|
||||
events; loud events hit the BW codec's known walker-stops-early
|
||||
limitation.
|
||||
- **IDFH** has its own segment-based decoder: `[len_be][0a 00 00 00]
|
||||
[00 NN][05 3f]` + N × 72-byte interval records (4 × 16-byte
|
||||
per-channel min/max/halfp). All 859 Thor IDFH corpus files
|
||||
decode (181,071 intervals); peak matches sidecar within ~1.8%
|
||||
(ADC quantization).
|
||||
- **IDFW** uses the series-3 record-chain `decode_waveform_v2()`. The
|
||||
body offset is **not** fixed: it is `<chain-head record> + 7`, found
|
||||
by `_find_waveform_body_offset()` anchoring on record headers. All
|
||||
**153/153** genuine Thor waveform files decode per-sample exact
|
||||
(1,057,536/1,057,536 samples).
|
||||
- **IDFH** segment header is `[len_be][0a 00 00 00][counter_be][05 3f]`,
|
||||
where `counter` is a **uint16 cumulative interval index** — it must
|
||||
not be constrained to a zero high byte (that capped histograms at 250
|
||||
intervals). Intervals whose `min > max` on all channels are unwritten
|
||||
slots carrying a ±full-scale seed and are skipped. 858/858 files land
|
||||
within 2% of Thor's PPV (median -0.004%).
|
||||
- **Geo LSB is `0.000310308` in/s per count** (full scale 10.0 in/s =
|
||||
32226.05 counts). Series-3's 32000-count scale does NOT apply.
|
||||
- **Record modes** are `02 00` deltas (14 B header), `01 00` absolute,
|
||||
`00 03` raw 12-bit, and `00 00` **raw int16** (all 10 B headers).
|
||||
`01 00` and `00 00` are also valid as the implicit segment-0 preamble.
|
||||
|
||||
⚠ **Thor's histogram PPV has a 0.0050 in/s display floor.** 41.4% of
|
||||
prod IDFH sidecars report a component PPV exceeding their own vector
|
||||
sum — impossible. On quiet files our decode is *more* accurate than
|
||||
the reference; do not "fix" the decoder to match it.
|
||||
|
||||
The two outlier `BE9439_*` files in the Thor example corpus are
|
||||
actually Series III Blastware binaries that share the `.IDFW`/`.IDFH`
|
||||
@@ -379,15 +506,19 @@ with zero mismatches. Before: 1 of 1196.
|
||||
`BE12599/N599LPWJ.980W` @849, `BE9558/K558LOF2.820W` @1485.
|
||||
(The series-3 histogram codec was fixed 2026-08-25 — see below.)
|
||||
|
||||
- **Micromate (UM-series) IDF decode is ~1000× low** — e.g.
|
||||
`UM11402_20260406130113.IDFW` gives a Tran peak of 0.0009 in/s against
|
||||
a device-reported 1.1168. The Thor IDF path decodes sanely, so this
|
||||
is UM-specific.
|
||||
- **Thor IDF per-count LSB** — after the 32000 geo full-scale
|
||||
correction, series-4 Thor peaks sit at a median 0.983 of the
|
||||
device-reported peak (was 0.960 under 32768). Closer but not exact;
|
||||
Thor likely uses its own per-count LSB rather than the BW
|
||||
16-count/0.005 in/s convention.
|
||||
- ~~**Micromate (UM-series) IDF decode is ~1000× low**~~ — FIXED 2026-09-10.
|
||||
`UM11402_20260406130113.IDFW` now decodes Tran 1.1168 / Vert 4.3220 /
|
||||
Long 0.9135, matching the device report exactly. Root cause was the
|
||||
body-offset search landing inside a record header plus the unhandled
|
||||
`00 00` record mode, not anything UM-specific.
|
||||
- ~~**Thor IDF per-count LSB**~~ — RESOLVED 2026-09-10. The 0.983 ratio was
|
||||
exactly `0.0003 / 0.000310308`. Thor's geo LSB is **0.000310308 in/s per
|
||||
count** (full scale 10.0 in/s = 32226.05 counts), pinned to ±6e-11 by
|
||||
intersecting 991,415 rounding constraints from Thor's own exports and
|
||||
corroborated by the ±full-scale seed (`±32226`) left in unwritten IDFH
|
||||
interval slots. Series-3's 32000-count scale does **not** carry over.
|
||||
Note `10.0/32226` is very slightly wrong — see
|
||||
`docs/idf_protocol_reference.md`.
|
||||
|
||||
### Decoded sample counts (across the fixture bundle)
|
||||
|
||||
@@ -1803,4 +1934,4 @@ body) because writing a dial string may require DLE escaping for embedded contro
|
||||
|
||||
To parse BW TX captures: use `bridges/captures/` scripts or adapt the `find_write_frames()` pattern
|
||||
in `/tmp/analyze_write_payload.py` — it correctly handles `0x10 0x03` DLE-escaped ETX bytes
|
||||
inside write frame data (the naive parser terminates early at the escaped `0x03`).
|
||||
inside write frame data (the naive parser terminates early at the escaped `0x03`).
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
# seismo-relay `v0.26.0`
|
||||
# seismo-relay `v0.31.0`
|
||||
|
||||
A ground-up replacement for **Blastware** — Instantel's aging Windows-only
|
||||
software for managing seismographs. Supports both the **MiniMate Plus
|
||||
@@ -496,6 +496,11 @@ Use **com0com** or **VSPD** to create the virtual COM pair on Windows.
|
||||
|
||||
## Roadmap (Future)
|
||||
|
||||
> **Where it stands *today*** — an honest per-capability maturity assessment,
|
||||
> what to rely on, known issues, and the gap to a real tool:
|
||||
> [`docs/sfm_tool_status.md`](docs/sfm_tool_status.md). This section covers
|
||||
> where it is *going*.
|
||||
|
||||
### Strategic direction — where this is going
|
||||
|
||||
seismo-relay is being built as a **suite of cooperating components**
|
||||
|
||||
@@ -177,6 +177,8 @@ class AchSession:
|
||||
store: "WaveformStore",
|
||||
clear_after_download: bool = False,
|
||||
restart_monitoring: bool = False,
|
||||
rescue_stop_monitoring: bool = False,
|
||||
rescue_disable_ach: bool = False,
|
||||
force_redownload: bool = False,
|
||||
) -> None:
|
||||
self.sock = sock
|
||||
@@ -190,6 +192,9 @@ class AchSession:
|
||||
self.store = store
|
||||
self.clear_after_download = clear_after_download
|
||||
self.restart_monitoring = restart_monitoring
|
||||
# Rescue actions for a runaway unit — fired before the event walk.
|
||||
self.rescue_stop_monitoring = rescue_stop_monitoring
|
||||
self.rescue_disable_ach = rescue_disable_ach
|
||||
# `force_redownload` tells this session to ignore ach_state and
|
||||
# re-download every event currently on the device, regardless of any
|
||||
# (key, timestamp) match. Useful as a manual override when state has
|
||||
@@ -290,6 +295,41 @@ class AchSession:
|
||||
root_logger.addHandler(fh)
|
||||
|
||||
try:
|
||||
# ── Step 1.5: rescue actions ──────────────────────────────────────
|
||||
# Fired BEFORE the event walk so a runaway unit is quieted as early
|
||||
# in the session as possible. A unit whose geophone sits above the
|
||||
# trigger threshold records back-to-back and, with ACH set to "after
|
||||
# event recorded", re-dials every time — saturating its own firmware
|
||||
# so it never services inbound requests. See
|
||||
# docs/runbooks/wedged_unit_recovery.md.
|
||||
#
|
||||
# Each action is independently guarded: a failure here must not
|
||||
# abort the download that follows.
|
||||
if self.rescue_stop_monitoring or self.rescue_disable_ach:
|
||||
rescue: dict = {"peer": self.peer, "ts": ts}
|
||||
|
||||
if self.rescue_stop_monitoring:
|
||||
log.info("Step 1.5: RESCUE — stop monitoring (SUB 0x97)")
|
||||
try:
|
||||
client.stop_monitoring()
|
||||
rescue["stop_monitoring"] = "ok"
|
||||
log.info(" stop monitoring OK — device should stop recording")
|
||||
except Exception as exc:
|
||||
rescue["stop_monitoring"] = f"failed: {exc}"
|
||||
log.error(" stop monitoring FAILED: %s", exc)
|
||||
|
||||
if self.rescue_disable_ach:
|
||||
log.info("Step 1.5: RESCUE — disable auto call home (SUB 0x2C/0x7E/0x7F)")
|
||||
try:
|
||||
client.set_call_home_config(auto_call_home_enabled=False)
|
||||
rescue["disable_ach"] = "ok"
|
||||
log.info(" disable ACH OK — unit should stop calling home")
|
||||
except Exception as exc:
|
||||
rescue["disable_ach"] = f"failed: {exc}"
|
||||
log.error(" disable ACH FAILED: %s", exc)
|
||||
|
||||
_save_json(session_dir / "rescue.json", rescue)
|
||||
|
||||
# ── Step 2: device info ───────────────────────────────────────────
|
||||
device_info = None
|
||||
if not self.events_only:
|
||||
@@ -747,6 +787,13 @@ def serve(args: argparse.Namespace) -> None:
|
||||
print(f" Max events per session: {max_ev if max_ev else 'unlimited'}")
|
||||
print(f" Clear device after download: {'YES' if args.clear_after_download else 'no'}")
|
||||
print(f" Restart monitoring after download: {'YES' if args.restart_monitoring else 'no'}")
|
||||
_stop_mon = args.stop_monitoring or args.rescue
|
||||
_dis_ach = args.disable_ach or args.rescue
|
||||
print(f" RESCUE stop monitoring on connect: {'YES' if _stop_mon else 'no'}")
|
||||
print(f" RESCUE disable auto call home: {'YES' if _dis_ach else 'no'}")
|
||||
if _stop_mon and args.restart_monitoring:
|
||||
print(" !! --restart-monitoring will re-start the unit after download,")
|
||||
print(" undoing --stop-monitoring. Drop one of them.")
|
||||
print(f" Force re-download all (ignore state): {'YES' if args.force_redownload_all else 'no'}")
|
||||
print(f"{'='*60}")
|
||||
print(f"\n Point your test unit's ACEmanager call-home settings to:")
|
||||
@@ -788,6 +835,8 @@ def serve(args: argparse.Namespace) -> None:
|
||||
store=store,
|
||||
clear_after_download=args.clear_after_download,
|
||||
restart_monitoring=args.restart_monitoring,
|
||||
rescue_stop_monitoring=args.stop_monitoring or args.rescue,
|
||||
rescue_disable_ach=args.disable_ach or args.rescue,
|
||||
force_redownload=args.force_redownload_all,
|
||||
)
|
||||
t = threading.Thread(target=session.run, daemon=True, name=f"ach-{peer}")
|
||||
@@ -862,6 +911,32 @@ def parse_args() -> argparse.Namespace:
|
||||
"DCD on disconnect — without this the unit stays idle after a call-home."
|
||||
),
|
||||
)
|
||||
p.add_argument(
|
||||
"--stop-monitoring",
|
||||
action="store_true",
|
||||
default=False,
|
||||
help=(
|
||||
"RESCUE: send SUB 0x97 (stop monitoring) immediately after the "
|
||||
"handshake, before any event download. Use on a unit that is "
|
||||
"recording back-to-back because of a stuck-triggered geophone."
|
||||
),
|
||||
)
|
||||
p.add_argument(
|
||||
"--disable-ach",
|
||||
action="store_true",
|
||||
default=False,
|
||||
help=(
|
||||
"RESCUE: disable Auto Call Home on the device (SUB 0x2C read → "
|
||||
"0x7E write → 0x7F confirm) immediately after the handshake. The "
|
||||
"unit stops dialing out until ACH is explicitly re-enabled."
|
||||
),
|
||||
)
|
||||
p.add_argument(
|
||||
"--rescue",
|
||||
action="store_true",
|
||||
default=False,
|
||||
help="Shorthand for --stop-monitoring --disable-ach.",
|
||||
)
|
||||
p.add_argument(
|
||||
"--clear-after-download",
|
||||
action="store_true",
|
||||
|
||||
@@ -6,7 +6,15 @@ Series IV event-file format. Sibling to
|
||||
Series III "Rosetta Stone") — this doc holds what we know so far and
|
||||
the open questions still to crack.
|
||||
|
||||
**Status (2026-05-28):** ASCII text sidecar fully decoded (1,014
|
||||
> ⚠ **The "Status (2026-05-28)" block below is SUPERSEDED.** Its geo LSB
|
||||
> (0.0003), its IDFH scale (`/32768 × 10`), its fixed body offset (`0x0f1f`)
|
||||
> and its "87–99% byte-exact / loud events truncate" caveat were all wrong or
|
||||
> incomplete. See **[Verified against Thor's own exports
|
||||
> (2026-09-10)](#verified-against-thors-own-exports-2026-09-10)** — the
|
||||
> decoder is now per-sample exact on 1,057,536/1,057,536 samples. The block
|
||||
> is kept only for the reverse-engineering trail.
|
||||
|
||||
**Status (2026-05-28, SUPERSEDED):** ASCII text sidecar fully decoded (1,014
|
||||
sample files round-trip). **Thor IDFW** binary now decodes via
|
||||
`micromate.idf_file.read_idf_file()` — reuses the BW segment-rotated
|
||||
block codec verbatim at fixed body offset `0x0f1f`; metadata (serial,
|
||||
@@ -44,6 +52,220 @@ signature and raises `NotImplementedError` pointing callers at
|
||||
time-of-peak); the two uint16 fields (probably PVS contributions);
|
||||
8-byte interval tail (PVS data); mic dB(L) exact conversion constant.
|
||||
|
||||
## Verified against Thor's own exports (2026-09-10)
|
||||
|
||||
**The series-4 decoder is now per-sample exact.** 1,057,536 / 1,057,536
|
||||
geophone samples across all 153 genuine Thor waveform files reproduce Thor's
|
||||
own CSV export exactly; histogram peaks land within 2% on 858/858 files
|
||||
(median error −0.004%).
|
||||
|
||||
### Ground truth — it was there all along
|
||||
|
||||
Thor writes `TXT/`, `CSV/`, `XML/` and `PDF/` exports beside every binary:
|
||||
|
||||
```
|
||||
<serial dir>/UM13981_20220207084555.IDFW
|
||||
<serial dir>/CSV/UM13981_20220207084555.IDFW.csv
|
||||
```
|
||||
|
||||
The **CSV carries a per-sample block** — four columns (Tran, Vert, Long, Mic)
|
||||
in in/s and psi, after the 2-column report header. That is the series-4
|
||||
equivalent of Blastware's `_ASCII.TXT` exports, and it gives 1,012 paired
|
||||
files (152 IDFW + 860 IDFH). Earlier notes in this file and in
|
||||
`micromate/idf_file.py` asserted "Thor has no ASCII ground truth in the
|
||||
corpus"; that was wrong, and it is why the decoder sat pinned to a
|
||||
superseded walker with a scaling constant nobody could check.
|
||||
|
||||
Harness: `scratch/verify_thor_against_csv.py`.
|
||||
|
||||
### Geo LSB = 0.000310308 in/s per count (NOT 0.0003)
|
||||
|
||||
The old 0.0003 was read off the smallest non-zero sample in the exports —
|
||||
but that is Thor's **4-decimal display rounding of the LSB, not the LSB**.
|
||||
It read every series-4 geophone sample **3.3% low**. The quantisation
|
||||
ladder gives it away: counts 1..6 export as 0.0003, 0.0006, 0.0009, 0.0012,
|
||||
0.0016, 0.0019 — an LSB of exactly 0.0003 would end 0.0015, 0.0018.
|
||||
|
||||
Each exported sample constrains the LSB to the window that rounds to its
|
||||
printed value. Intersecting 991,415 such constraints gives
|
||||
|
||||
```
|
||||
LSB ∈ [0.000310307933, 0.000310308057] width 1.2e-10
|
||||
```
|
||||
|
||||
so `_GEO_LSB_IPS = 0.000310308`, i.e. full scale 10.0 in/s = **32226.05
|
||||
counts**. Corroboration: an IDFH interval that never recorded keeps its
|
||||
min/max accumulator at its ±full-scale seed, and that seed is
|
||||
`(min=+32226, max=-32226)`. ⚠ The tempting closed form `10.0/32226` is
|
||||
very slightly wrong — it lands 4.5e-10 above the feasible window and loses
|
||||
78 boundary samples while never winning one. **Series III uses 32000 counts
|
||||
for the same 10.0 in/s, so the two generations do not share a scale.**
|
||||
|
||||
Independently confirmed on 8 production units (UM6047, UM11402, UM11719,
|
||||
UM12947, UM13981, UM14133, UM20146, UM20147): every unit's median PPV error
|
||||
against its device-reported peak moved from −3.3% to within ±0.03%. It is a
|
||||
global constant, not a per-unit calibration.
|
||||
|
||||
### IDFH segment header: the counter is a uint16, and it is cumulative
|
||||
|
||||
```
|
||||
[length_be 2B][0a 00 00 00][counter_be 2B][05 3f]
|
||||
```
|
||||
|
||||
`counter` is the **0-based cumulative index of the last interval in the
|
||||
segment** — 9, 19, 29, ... for the usual 10-intervals-per-segment layout
|
||||
(`length` = 730).
|
||||
|
||||
The validator used to require `counter`'s high byte to be `0x00`. That
|
||||
silently **capped every histogram at 250 intervals**: once the cumulative
|
||||
counter passed 255 the high byte went non-zero and every later segment was
|
||||
rejected. Any run longer than ~4 hours lost its tail — frequently the part
|
||||
holding the event peak, so the file's PPV read low. **540 of 858 corpus
|
||||
files were affected**; fixing it moved histogram peaks from 48.3% to 93.8%
|
||||
within 0.5% of Thor's reported PPV.
|
||||
|
||||
### Unwritten interval slots carry a ±full-scale seed
|
||||
|
||||
An interval the device reserved but never wrote keeps `min = +32226`,
|
||||
`max = -32226` on all four channels — `min > max`, impossible for real data.
|
||||
Decoded naively it yields a 10.0 in/s peak on every channel and, being a
|
||||
max-over-intervals, poisons the whole file's PPV. Rare but real: exactly 1
|
||||
of 497,611 corpus intervals, and it inflated that file's Long PPV from
|
||||
0.0081 to 10.0 in/s. The inversion is all-or-nothing across channels (0
|
||||
partial cases), so requiring every channel to be inverted is a safe test.
|
||||
|
||||
### Record mode `00 00` — raw int16 absolute (MODE_RAW16)
|
||||
|
||||
The record chain's mode field at `off+8` takes a fourth value:
|
||||
|
||||
| mode | meaning | header |
|
||||
|---|---|---|
|
||||
| `02 00` | deltas + two int16 anchors | 14 B |
|
||||
| `01 00` | absolute, tagged blocks | 10 B |
|
||||
| `00 03` | raw 12-bit absolute, untagged | 10 B |
|
||||
| **`00 00`** | **raw int16 BE absolute, untagged** | **10 B** |
|
||||
|
||||
A `MODE_RAW16` record with `length = 1032` carries exactly
|
||||
`(1032 - 8) / 2 = 512` samples and reproduced Thor's export **512/512
|
||||
exactly** on first test. Thor uses it for segment 0 (the pre-trigger
|
||||
window) on some events. Before this mode existed the record fell through
|
||||
the dispatch unhandled, so the channel silently lost its first 512 samples —
|
||||
which is what produced the "loud events truncate" symptom.
|
||||
|
||||
`MODE_ABSOLUTE` is also valid as a **preamble** (the implicit segment-0 Tran
|
||||
record); its tagged blocks start at `body[3]`, not `body[7]`, because its
|
||||
header is 10 bytes rather than 14.
|
||||
|
||||
### Body offset is not fixed at 0x0f1f — and 0x0f1f is really a record + 7
|
||||
|
||||
A "body offset" is `<record start> + 7`, so that `body[0]` is the segment
|
||||
index and `body[1:3]` is the mode. The canonical `0x0f1f` is simply the
|
||||
record at `0x0f18`.
|
||||
|
||||
Searching for the literal preamble `00 02 00` finds only MODE_DELTA bodies,
|
||||
and worse, it **matches the `[seg][mode]` bytes inside any record header**,
|
||||
so the scan could pick a candidate part-way down the chain. That decodes a
|
||||
plausible-looking but rotation-shifted body which drops each channel's
|
||||
segment 0 — the real cause of the remaining truncations.
|
||||
|
||||
`_find_waveform_body_offset()` now anchors on record headers (the
|
||||
`<channel_id> 00 00` signature at `+4`, validated with `is_record()`),
|
||||
takes the **chain head** — a record no other record's length field points at
|
||||
— and trial-decodes `head + 7`, preferring the candidate where all four
|
||||
channels come out the same length.
|
||||
|
||||
⚠ Do **not** scan for candidate preambles instead: `MODE_RAW16` is
|
||||
`00 00`, so every run of three zero bytes looks like a body start and each
|
||||
costs a full trial decode (~0.5 s/file measured, vs 6 ms/file now).
|
||||
|
||||
### `40 NN` is not capped at NN=8 (2026-09-11)
|
||||
|
||||
`data_block_len()` rejected any `40 NN` int16 block with `NN > 0x08`. The cap
|
||||
had no evidence behind it — every corpus available when it was written used
|
||||
only NN ∈ {1, 2, 3, 4, 8}, so it was never exercised. Loud events use much
|
||||
wider blocks:
|
||||
|
||||
| corpus | `40 NN` values | walker stops |
|
||||
|---|---|---|
|
||||
| first + 3-channel corpora | 1, 2, 3, 4, 8 | none |
|
||||
| UM12947 2025-07..09 | 2, 4, 8, **12, 16, 20 … 196** | every value > 8 |
|
||||
|
||||
Because `walk_body`/`run` stop at the first unrecognised tag rather than
|
||||
raising, this surfaced as **silently short channels** — e.g. Tran 1812 /
|
||||
Vert 2132 / Long 2324 on a file whose export has 2324 for all three. The
|
||||
real bound is the buffer (and the caller's record end), not a magic constant.
|
||||
|
||||
Verified against Thor's exports for UM12947 (2025-07-14 … 2025-09-25, 167
|
||||
waveforms): length mismatches **22 → 0**, and **1,476,242 / 1,476,249**
|
||||
samples exact.
|
||||
|
||||
⚠ These events are **not** truncated recordings, which was the competing
|
||||
hypothesis — the exports carry the full sample count.
|
||||
|
||||
**The 7 residual samples are Thor's rounding, not ours.** Each differs by
|
||||
exactly one 4th-decimal tick (e.g. decoded 3.3551 vs export 3.3550).
|
||||
Intersecting the per-sample rounding constraints over this corpus is
|
||||
**infeasible** — the binding pair (count 2013 → 0.6247, count 4351 → 1.3501)
|
||||
contradict by 2.3e-11, i.e. 7e-5 relative. No single linear LSB can
|
||||
reproduce every printed value, so Thor is not doing plain round-half-up on
|
||||
`count × LSB`. Do not retune `_GEO_LSB_IPS` to chase these; it is already
|
||||
pinned to ~1e-11.
|
||||
|
||||
### Mic-disabled units are a distinct shape (2026-09-10, second corpus)
|
||||
|
||||
Some units run with the microphone disabled — **3 channels, not 4** — and that
|
||||
changes two structural things. Confirmed on the `9-10-26-csv-req` corpus
|
||||
(UM11402, UM12947, UM20147): 139/139 waveforms and 877/877 histograms.
|
||||
|
||||
**Waveform: the body starts earlier.** A 3-channel unit has a shorter fixed
|
||||
header and puts its record chain head at **`0x0dba`**, below the old
|
||||
`_BODY_SCAN_FLOOR` of `0x0E00`. The head was therefore invisible to the scan,
|
||||
which fell through to the *Vert* segment-0 record and decoded a body shifted
|
||||
one position around the channel rotation. The signature is unmistakable:
|
||||
|
||||
```
|
||||
Tran 3072 / Vert 2560 / Long 3072 / MicL 0 <- Vert exactly 512 short
|
||||
```
|
||||
|
||||
46 of 139 files in that corpus were affected; all 46 became per-sample exact
|
||||
once the floor dropped to `0x0C00`. Note the body-offset scoring also had to
|
||||
stop requiring four channels — `len(lengths) >= 3`, not `== 4`, or `equal` is
|
||||
permanently False for these events and the pick falls back to raw sample count.
|
||||
|
||||
**Histogram: the interval record is 56 bytes, not 72.**
|
||||
|
||||
```
|
||||
interval_size = 16 × n_channels + 8 (72 for 4 channels, 56 for 3)
|
||||
```
|
||||
|
||||
It is **not a constant**, and it cannot be inferred from `length` alone.
|
||||
Derive the interval count from the segment counter — it is cumulative, so
|
||||
`n = counter - previous_counter` — and then `stride = (length - 10) / n`.
|
||||
`n_channels` follows from `(stride - 8) / 16`.
|
||||
|
||||
Assuming 72 read 7 intervals out of each 10-interval segment and then walked
|
||||
off alignment into garbage that decoded as ~10 in/s peaks — inflating those
|
||||
files' PPV by up to 191,000%. Fixing it moved the second corpus from 56.6% to
|
||||
**100.0%** of histograms within 2% of Thor's reported PPV, and recovered 4
|
||||
files that previously decoded no intervals at all.
|
||||
|
||||
### What is still open
|
||||
|
||||
- ~~23 of 575 production IDFW files~~ — **RESOLVED 2026-09-11.** Production
|
||||
IDFW is now **575/575** with zero truncations and zero decode failures
|
||||
(median PPV error −0.0007%). See "`40 NN` is not capped at NN=8" above.
|
||||
|
||||
- Mic → psi scale is still the rough `2.14e-6` regression, not derived.
|
||||
- Per-channel `int16 field4` in the IDFH interval record (possibly
|
||||
time-of-peak) and the 8-byte tail (PVS data) remain undecoded.
|
||||
|
||||
⚠ **Thor's histogram PPV has a display floor of 0.0050 in/s.** In the
|
||||
production store 6,080 sidecar PPV values are exactly 0.0050 (next most
|
||||
common value: 275 occurrences), and **41.4% of IDFH sidecars report a
|
||||
component PPV larger than their own vector sum** — geometrically impossible.
|
||||
On those quiet files the decoder's ~0.0025 in/s is *more* accurate than the
|
||||
reference; do not "fix" the decoder to match it.
|
||||
|
||||
### Codec breakthroughs (2026-05-28)
|
||||
|
||||
- **Body offset is a fixed `0x0f1f`** across 151/154 corpus IDFW
|
||||
|
||||
@@ -3524,6 +3524,11 @@ of them was, for a while.
|
||||
|
||||
### E.1 The "offset" fault
|
||||
|
||||
> **The full investigation now lives in `docs/offset_investigation.md`** --
|
||||
> base rate, detector definition, per-unit case files, ruled-out hypotheses,
|
||||
> and Instantel's own autozero procedure with its 2027-2069 acceptance
|
||||
> window. This appendix is kept as the protocol-side summary.
|
||||
|
||||
**Symptom.** One geophone channel's baseline steps away from zero and
|
||||
stays there. The trace still carries the real AC signal, but it rides
|
||||
on a DC pedestal of a few tenths of an in/s. Operators call this an
|
||||
|
||||
@@ -0,0 +1,987 @@
|
||||
# The "offset" fault — investigation journal
|
||||
|
||||
> ## ⚠ CORRECTED 2026-08-28 (same day) — the v1 detector was wrong
|
||||
>
|
||||
> Brian pushed back on the finding that offsets "come and go": in the field,
|
||||
> once a unit develops one it stays broken until the geophone is replaced.
|
||||
> He was right, and the challenge exposed **two real flaws** in the v1 detector:
|
||||
>
|
||||
> 1. **It scored only the axis with the largest peak.** A real event on one axis
|
||||
> hid a persistent pedestal on another. BE12599 on 2026-08-21 read "clean"
|
||||
> solely because Long had a 1.065 in/s event — Tran was sitting at
|
||||
> **+0.4732 in/s** at that moment and was never examined.
|
||||
> 2. **It used the MEAN**, which a real transient perturbs. The **median** is the
|
||||
> resting baseline — most samples sit at it, so a blast does not move it.
|
||||
> Same event, Long channel: mean **+0.0783** vs median **-0.0050**.
|
||||
>
|
||||
> Both flaws manufactured false recoveries. The corrected detector
|
||||
> (`scratch/offset_scan2.py`, per-channel median) shows the pedestal is
|
||||
> **persistent**, exactly as the field experience says. See §2b and §3b.
|
||||
>
|
||||
> **Then Brian proposed a better detector still** — measure the floor during
|
||||
> the *pre-trigger* window, and require it to hold across pre/middle/end.
|
||||
> That is now the detector of record (§2c). Final answer: **5 of 45 units
|
||||
> (11%)**, stable across a 2x threshold range.
|
||||
>
|
||||
> Sections below that were written against v1 are marked; v1 numbers are kept
|
||||
> for the reasoning trail, not as current fact.
|
||||
|
||||
A running record of the **offset** hardware fault on Instantel Series III
|
||||
seismographs: a geophone channel whose trace sits displaced from zero rather
|
||||
than centred on it.
|
||||
|
||||
This is a *journal*, not a spec. Findings are dated, dead ends are kept with
|
||||
the reason they died, and every number says where it came from. When something
|
||||
here is superseded, strike it and say why rather than deleting it — the point
|
||||
is that a future session can tell what was actually established from what was
|
||||
merely believed at the time.
|
||||
|
||||
Companion material:
|
||||
- `scratch/offset_scan.py` — the detector
|
||||
- `scratch/verify_against_ascii.py` — decoder verification harness
|
||||
- `docs/instantel_protocol_reference.md` — wire protocol, incl. the
|
||||
unimplemented `SUB 0x0E` this investigation now wants
|
||||
|
||||
---
|
||||
|
||||
## TL;DR (current state, 2026-08-28)
|
||||
|
||||
- **It is real device data, not a decode bug.** Settled early and confirmed
|
||||
against Blastware's own ASCII exports.
|
||||
- **Base rate: 5–6 of 45 units (11–13%)** across the full DL2 archive,
|
||||
2018–2026. This *confirms* the earlier 2-of-21 (9.5%) estimate from the much
|
||||
smaller Terra-View DB — survivorship bias from deleted events had **not**
|
||||
concealed a wave of cases.
|
||||
- **The fault is bimodal, not a drift continuum.** A unit is either clean or
|
||||
grossly off. Loosening the amplitude threshold 11× adds no new units.
|
||||
- **The unit's own sensor check cannot see it.** 102 offset events, zero
|
||||
sensor-check failures. Do not try to use it as a screen.
|
||||
- **Cause is still unsettled.** Instantel's autozero fixes the minority of
|
||||
cases; the rest are hardware. We cannot yet tell which is which remotely.
|
||||
- **The histogram corpus (63,535 files, 9.7x the waveforms) is now scanned too** —
|
||||
see §8b. It independently confirms BE18438 and BE9558 with a clean 2.5x
|
||||
separation, but detects only **2 of the 5** confirmed units, cannot attribute a
|
||||
channel, and resolves time to ~a month. **A negative histogram result is not
|
||||
evidence of health** — DC leakage into the interval peak varies 45x between units.
|
||||
- **`offset_scan3.py` has a label defect** (§8b): its spread gate discards 18.8% of
|
||||
high-|pre| rows onto units currently counted as clean. Re-cut before quoting any
|
||||
precision number again.
|
||||
- **Best open lead:** `SUB 0x0E` (channel sensor data, 8 channels × 10 bytes,
|
||||
unimplemented) may carry the very numbers Instantel says to check against
|
||||
**2027–2069**. Untested.
|
||||
|
||||
---
|
||||
|
||||
## 1. What the fault looks like
|
||||
|
||||
A healthy geophone trace is centred on zero. An offset channel is parked away
|
||||
from zero, so the channel **mean approaches its own peak**. In Blastware the
|
||||
signature is "parallel lines above or below the zero line" (Instantel's own
|
||||
wording).
|
||||
|
||||
Consequences observed in the field:
|
||||
- The unit can **self-trigger on its own offset** when the displacement exceeds
|
||||
the geo trigger level, producing streams of junk events with no ground
|
||||
motion. Instantel has a separate FAQ for this symptom (13-0-22, *"Unit
|
||||
triggers continuously without activity"*).
|
||||
- Recorded PPV for that channel is meaningless while the fault persists.
|
||||
|
||||
---
|
||||
|
||||
## 2. The detector
|
||||
|
||||
Implemented in `scratch/offset_scan.py`. Operates on raw BW binaries only — no
|
||||
DB, no sidecars.
|
||||
|
||||
```
|
||||
for each series-3 waveform binary:
|
||||
decode -> per-channel ADC counts
|
||||
dominant axis = channel with the largest |peak|
|
||||
flag when |mean| / peak > 0.70
|
||||
and |mean| >= 0.90 x the unit's geo trigger level
|
||||
episodes = per-serial runs of flagged events, split on a >12 h gap
|
||||
```
|
||||
|
||||
Why each term:
|
||||
|
||||
| term | purpose |
|
||||
|---|---|
|
||||
| `\|mean\|/peak > 0.7` | the discriminator. A DC-parked trace has mean ≈ peak. |
|
||||
| `\|mean\| >= 0.9 × trigger` | amplitude floor — suppresses quiet traces where mean and peak are both tiny and the ratio is meaningless. |
|
||||
| dominant axis only | the fault is per-channel; scoring all three dilutes it. |
|
||||
| 12 h episode gap | separates deployments/visits rather than counting events. |
|
||||
|
||||
Trigger level comes from a paired `_ASCII.TXT` when one exists, else the
|
||||
per-serial median learned from that unit's ASCII files, else 0.2 in/s.
|
||||
|
||||
**Known limitation.** Event traces contain real ground motion, so this can only
|
||||
see offsets large enough to *dominate* the trace. A mild offset on a real blast
|
||||
is invisible. Instantel's A/D-mode check (§5) is the only thing that sees the
|
||||
mild end. Our base rate is therefore a **gross-offset** rate.
|
||||
|
||||
### 2b. Detector v2 — per-channel median (CURRENT)
|
||||
|
||||
`scratch/offset_scan2.py`. Supersedes the above.
|
||||
|
||||
```
|
||||
for each series-3 waveform binary:
|
||||
for each geo channel independently:
|
||||
pedestal = median(samples) # resting baseline, robust to blasts
|
||||
flag the CHANNEL when |pedestal| >= 0.025 in/s (5 A/D counts)
|
||||
a unit has a real fault when a channel is flagged on >=3 CONSECUTIVE events
|
||||
```
|
||||
|
||||
Why median: a DC pedestal shifts every sample, so it moves the median. A real
|
||||
event moves only a minority of samples, so it does not. This removes the need
|
||||
for the `m/p` ratio guard entirely — that guard existed only to compensate for
|
||||
using the mean.
|
||||
|
||||
Why per-channel: the fault is on one geophone axis. Scoring only the dominant
|
||||
axis means any event with motion elsewhere hides it.
|
||||
|
||||
Why "3 consecutive": the 0.025 in/s floor is only ~2x a healthy channel's
|
||||
resting median (observed 0.010-0.015), so isolated flags are noise. Persistence
|
||||
is the discriminator — and it is what the field experience predicts.
|
||||
|
||||
---
|
||||
|
||||
## 3b. Archive results, corrected (v2)
|
||||
|
||||
| | v1 (dominant axis, mean) | **v2 (per-channel median)** |
|
||||
|---|---|---|
|
||||
| units with any flagged event | 6 of 45 | 19 of 45 |
|
||||
| **units with a sustained pedestal (>=3 consecutive)** | — | **8 of 45 (18%)** |
|
||||
| runs of >=3 consecutive | — | 29 |
|
||||
| runs of 1-2 events (noise) | — | 69 |
|
||||
|
||||
Units with a sustained pedestal: **BE9558, BA10895, BE11007, BE11529, BE12599,
|
||||
BE13117, BE18003, BE18438**. BA10895 and BE18003 were invisible to v1.
|
||||
|
||||
**The affected channel is most often Vert**, which v1 got wrong — it named
|
||||
whichever axis had the largest peak. BE13117 and BE18438 are both Vert faults.
|
||||
|
||||
Longest / clearest runs:
|
||||
|
||||
| unit | ch | span | events | median in/s |
|
||||
|---|---|---|---|---|
|
||||
| BE13117 | Vert | 2023-05-03 → 05-04 | 194 | 0.035 → **1.915** |
|
||||
| BE18438 | Vert | 2026-02-25 → 02-26 | 75 | 0.180 → 0.370 |
|
||||
| BE9558 | Vert | 2020-02-11 (6 h) | 33 | 0.065 → 0.090 |
|
||||
| BE12599 | Tran | 2026-08-14 → 08-23 | 8 | 0.030 → **0.565** |
|
||||
| BE18003 | Vert | 2021-03-17 → 06-11 | 3 | 0.040 → 0.060 |
|
||||
|
||||
BE12599 began **2026-08-14**, not 08-17 as v1 reported, and was still faulting
|
||||
at the last event in the archive.
|
||||
|
||||
### 2c. Detector v3 — PRE-TRIGGER floor + constant-floor test (CURRENT)
|
||||
|
||||
`scratch/offset_scan3.py`. Brian's method, and better than v2 for a reason
|
||||
worth naming: **the pre-trigger window is definitionally quiet** — it is the
|
||||
buffer captured before the trigger fired — whereas a whole-record median is
|
||||
merely *robust* to the event. `pretrig_samples` comes from the STRT record.
|
||||
|
||||
```
|
||||
per channel:
|
||||
pre = median of the first pretrig_samples samples
|
||||
mid = median of the middle third
|
||||
end = median of the final third
|
||||
spread = max(pre,mid,end) - min(pre,mid,end)
|
||||
|
||||
offset when |pre| >= floor AND spread <= 0.02 in/s
|
||||
real fault when a channel is flagged on >=3 CONSECUTIVE events
|
||||
```
|
||||
|
||||
A DC offset is a **constant floor** — present before the trigger, during, and
|
||||
after. The spread test rejects transients (settling, handling, a long event
|
||||
tail) that move one segment relative to the others, which is what v2's
|
||||
whole-record median could not do.
|
||||
|
||||
**The empirical noise floor justifies the threshold.** Across 19,244
|
||||
non-flagged channel-events the pre-trigger floor distributes as:
|
||||
|
||||
| floor | share |
|
||||
|---|---|
|
||||
| −1 unit (−0.005) | 18.4% |
|
||||
| **0.000** | **62.7%** |
|
||||
| +1 unit (+0.005) | 13.4% |
|
||||
|
||||
**94.5% within ±1 quantisation unit; median exactly +0.0000, mean −0.0008.**
|
||||
So there is **no systematic zero-point bias in the decoder** — an independent
|
||||
confirmation of the 32000-count scale. A healthy channel really does read
|
||||
0.000, and "any constant floor that is not 0.000" is the right signal, with
|
||||
±1 unit of slack for quantisation.
|
||||
|
||||
**The result is threshold-insensitive**, which is what distinguishes a real
|
||||
signal from a tuned one:
|
||||
|
||||
| floor | units flagged | sustained units |
|
||||
|---|---|---|
|
||||
| 2 units (0.010) | 34 | 15 ← into the noise |
|
||||
| 3 units (0.015) | 26 | 8 |
|
||||
| **4 units (0.020)** | 17 | **5** |
|
||||
| **5 units (0.025)** — Instantel's | 12 | **5** |
|
||||
| **8 units (0.040)** | 8 | **5** |
|
||||
|
||||
### FINAL RESULT: 5 of 45 units (11%)
|
||||
|
||||
**BE9558, BE11529, BE12599, BE13117, BE18438.**
|
||||
|
||||
Unchanged across a 2x threshold range. BE11007 and BA10895 drop out — the
|
||||
spread test identifies them as transients, not pedestals.
|
||||
|
||||
The 11% headline happens to match v1's, but the reasoning and the unit list
|
||||
differ: v1 included BE11007 and named the wrong *channel* on most units.
|
||||
|
||||
---
|
||||
|
||||
## 3. Archive results (2026-08-28)
|
||||
|
||||
Source: DL2 event export, 6,577 **unique** series-3 waveforms, 45 units.
|
||||
See [`dl2-archive`](#8-data-and-tooling) for the `Sent/` mirror trap.
|
||||
|
||||
**283 suspect events, 15 episodes, 6 of 45 units (13.3%).**
|
||||
Excluding BE11007 (§4, likely not an offset at all): **5 of 45 = 11.1%**.
|
||||
|
||||
### Threshold sensitivity — the bimodality result
|
||||
|
||||
Re-scoring the same corpus at a range of amplitude floors, with two
|
||||
ratio cut-offs (1 A/D count = 0.005 in/s, see §5):
|
||||
|
||||
| \|offset\| floor | m/p > 0.7 | m/p > 0.9 |
|
||||
|---|---|---|
|
||||
| 5 cts (0.025 in/s) — *Instantel's own* | 333 ev / 6 units | 279 ev / **5 units** |
|
||||
| 10 cts (0.050) | 294 / 6 | 274 / 5 |
|
||||
| 20 cts (0.100) | 250 / 5 | 244 / 4 |
|
||||
| 40 cts (0.200) | 209 / 5 | 203 / 4 |
|
||||
| 80 cts (0.400) | 152 / 4 | 148 / 2 |
|
||||
| 160 cts (0.800) | 144 / 2 | 141 / 1 |
|
||||
|
||||
Relaxing the floor by 11× (0.27 → 0.025 in/s) adds ~14% more events and **no
|
||||
new units**. There is no population of mild offsets hiding below our threshold
|
||||
*in event data*. Either a unit is clean or it is grossly off.
|
||||
|
||||
---
|
||||
|
||||
## 4. Per-unit case files
|
||||
|
||||
Ordered by severity. `m/p` medians are on the offending channel.
|
||||
|
||||
### BE13117 — one violent day, never again
|
||||
`145 / 454 events (32%)`, **1 episode**, 2023-05-04, 6.8 h.
|
||||
Offset climbed **0.393 → 1.875 in/s within the episode**. `m/p` median
|
||||
**0.996** — the trace is almost pure DC. No recurrence in the rest of its 454
|
||||
events. No ASCII files in the archive, so no calibration history.
|
||||
|
||||
### BE18438 — recurring, months apart
|
||||
`87 / 293 (30%)`, **2 episodes**: 2025-11-15 (1.2 h, n=12, 0.279 → 0.369) and
|
||||
2026-02-25 (**28.8 h**, n=75, 0.183 → 0.366). `m/p` median 0.967.
|
||||
Clean across all 196 events preceding its 2025-08-12 calibration.
|
||||
|
||||
### BE9558 — six years apart
|
||||
`38 / 196 (19%)`, **4 episodes**: 2020-02-11 (6.3 h, n=33, but only
|
||||
0.068 → 0.086 — very mild), then 2026-04-14, 2026-04-29, 2026-05-04
|
||||
(0.28–0.45). `m/p` median 0.919. Calibrated 2026-06-26; 0/7 events flagged
|
||||
after, but n=7 is far too small to call it fixed.
|
||||
|
||||
### BE12599 — the live case ⚠
|
||||
`6 / 77 (8%)`, **6 single-event episodes, one per day at exactly 05:00**,
|
||||
2026-08-17 → 2026-08-23. Offset rose 0.383 → 0.565 then fell back to 0.345.
|
||||
`m/p` ≈ 0.965, geo trigger 0.3 in/s — **the offset exceeds the trigger level,
|
||||
so the unit is triggering on its own fault**. Last calibrated 2025-08-12.
|
||||
|
||||
This is the most recent and the most useful: a currently-faulting unit is the
|
||||
natural experiment for the re-zero-vs-repair question (§7).
|
||||
|
||||
### BE11529 — marginal
|
||||
`4 / 99 (4%)`, 1 episode 2025-07-08, 0.4 h, offsets only 0.051 → 0.058 in/s.
|
||||
`m/p` median 0.959, so DC-dominated, but the magnitude is near the noise of
|
||||
this method. Treat as unconfirmed.
|
||||
|
||||
### BE11007 — probably NOT an offset
|
||||
`3 / 70 (4%)`, 1 episode 2022-01-17, offsets 5.500 → 6.904 in/s — by far the
|
||||
largest. But `m/p` is only **0.719–0.738** against ≥0.9 for every other unit,
|
||||
and the peaks are 7.6–9.4 in/s on a 10 in/s range. That reads as a **large
|
||||
real blast with asymmetric ground motion**, not a parked trace. Excluded from
|
||||
the headline base rate.
|
||||
|
||||
---
|
||||
|
||||
## 5. Instantel's own procedure and thresholds
|
||||
|
||||
From two Instantel technical-support FAQs supplied 2026-08-28
|
||||
(answers **13-0-21** *"How to determine offsets"* and **12-0-10** *"Removing
|
||||
offsets on an Instantel Series III monitor"*; created 2008/2007, last updated
|
||||
2009-03-06).
|
||||
|
||||
### Identifying (13-0-21)
|
||||
|
||||
1. Create or use an event with the **manual minimum trigger** set for the
|
||||
connected geophone and microphone — i.e. an event that recorded no real data.
|
||||
2. Save it and open in Blastware.
|
||||
3. An offset shows as **parallel lines above or below the zero line**.
|
||||
4. Put the unit in **A/D mode** — on Series III, press and hold `OPTION`, then
|
||||
press `START MONITOR`.
|
||||
5. **Display counts higher than 5**, with no vibration or overpressure present,
|
||||
indicate an offset.
|
||||
|
||||
### Removing — the autozero (12-0-10)
|
||||
|
||||
1. Be in a **quiet area with low vibration**.
|
||||
2. Power on the Blastmate III / Minimate Plus.
|
||||
3. Connect the geophone and microphone — **LINEAR mic only**.
|
||||
⚠ *Do not connect an "A" weight microphone, regardless of what the monitor
|
||||
displays.*
|
||||
4. Press `Test`.
|
||||
5. Wait for the **Sensor Check** results to appear.
|
||||
6. Press `OPTION` and `START MONITOR` **simultaneously**.
|
||||
7. `Performing Autozero` appears; press `Enter`.
|
||||
8. Confirm the sensors are properly connected; press `Enter`.
|
||||
9. Wait for the autozero to complete.
|
||||
10. Press `Enter` twice → Main Menu, *Ready To Monitor*, offset corrected.
|
||||
|
||||
### The go/no-go number — 2027 to 2069
|
||||
|
||||
> When you perform an Autozero on any Series III unit, the lists of numbers in
|
||||
> the **X1 and X8 gains should all be between 2027 and 2069**. If not, repeat
|
||||
> the Autozero. **If the numbers are extremely out of the specified range, then
|
||||
> the unit should be sent in for repair.**
|
||||
>
|
||||
> If this process does not remove the offset problem, return the unit **and
|
||||
> sensors** to Instantel for repair.
|
||||
|
||||
This is the documented explanation for the field experience (Brian's dad,
|
||||
2026-08-28) that **a re-zero works maybe 10% of the time** — the autozero only
|
||||
recovers units whose zero reference is still near-correct.
|
||||
|
||||
### Scale derivation (inference, well-supported — not proven)
|
||||
|
||||
2048 is 12-bit midscale. Our codec's geo full scale is 32000 internal counts =
|
||||
10 in/s, with 1 decoder unit = 16 counts = exactly 0.005 in/s
|
||||
(`geo-full-scale-is-32000-counts`). ±2000 A/D counts about 2048 therefore maps
|
||||
to ±10 in/s at **0.005 in/s per A/D count**. That makes:
|
||||
|
||||
- Instantel's ">5 counts" threshold ≈ **0.025 in/s**
|
||||
- the 2027–2069 window = **±21 counts = ±0.105 in/s** of tolerated zero error
|
||||
|
||||
Consistent and mutually corroborating, but we have not confirmed the A/D-count
|
||||
scale directly from a device reading.
|
||||
|
||||
---
|
||||
|
||||
## 6. Ruled out — keep these dead
|
||||
|
||||
### Condensation / humidity — DEAD (2026-08-25)
|
||||
Proposed, then killed by its own controls: BE18438 stayed flat across a 10-hour
|
||||
overnight gap, and only 2 of 21 units showed the fault while 19 sat in the same
|
||||
weather. The apparent "diurnal cycle" was an artifact of binning by hour-of-day
|
||||
across two days. See `waveform-dc-offset-is-real-device-data`.
|
||||
|
||||
### Clipping as a false-positive source — RULED OUT (2026-08-28)
|
||||
A rail-hitting trace would fake an offset (mean → peak). It isn't happening:
|
||||
median suspect peak is only **10% of full scale**, p90 is 18.6%. Only BE11007's
|
||||
3 events exceed 50% FS, and none reach 98%.
|
||||
|
||||
### The sensor check as a predictor — DOES NOT WORK (2026-08-28)
|
||||
Tested on 102 offset events across 4 units:
|
||||
|
||||
| unit | state | n | failed | median ratio | median freq |
|
||||
|---|---|---|---|---|---|
|
||||
| BE11529 | offset | 4 | **0** | 3.90 | 7.6 |
|
||||
| BE11529 | clean | 14 | 0 | 3.80 | 7.5 |
|
||||
| BE12599 | offset | 6 | **0** | 4.00 | 7.4 |
|
||||
| BE12599 | clean | 13 | 0 | 4.00 | 7.6 |
|
||||
| BE18438 | offset | 87 | **0** | 3.70 | 7.6 |
|
||||
| BE18438 | clean | 25 | 0 | 3.80 | 7.5 |
|
||||
| BE9558 | offset | 5 | **0** | 3.90 | 7.8 |
|
||||
| BE9558 | clean | 44 | 0 | 3.80 | 7.5 |
|
||||
|
||||
Zero failures on either side and indistinguishable ratios/frequencies. The
|
||||
swing test measures geophone frequency response and damping — it never examines
|
||||
DC zero. **A grossly offset unit passes its own self-check.** This is why the
|
||||
fault goes unnoticed until somebody looks at waveforms.
|
||||
|
||||
### "Offsets are transient / come and go on their own" — RETRACTED 2026-08-28
|
||||
v1 reported episodes lasting hours that ended spontaneously. **This was an
|
||||
artifact of the v1 detector** (see the banner at the top). With the per-channel
|
||||
median, the pedestal persists. Every clear case reads clean again only after a
|
||||
multi-day-to-multi-month gap consistent with service: BE13117 6 days, BE18438
|
||||
24 days, BE9558 63 days **with a confirmed Instantel calibration inside the
|
||||
gap**. BE12599 never reads clean — it is still faulting at the end of the
|
||||
archive. This matches the operational experience: once a unit develops an
|
||||
offset it stays broken until the geophone is replaced.
|
||||
|
||||
### "Offsets develop N months after calibration" — CONFOUNDED, NOT A FINDING
|
||||
Tempting, and it looked strong:
|
||||
|
||||
| unit | suspect before latest cal | after |
|
||||
|---|---|---|
|
||||
| BE18438 | 0 / 196 | 87 / 97 |
|
||||
| BE12599 | 0 / 62 | 6 / 15 |
|
||||
| BE11529 | 0 / 82 | 4 / 17 |
|
||||
| BE9558 | 38 / 189 | 0 / 7 |
|
||||
|
||||
But bucketing suspects by months-since-calibration gives **one unit per bucket**:
|
||||
`0–3mo={BE11529}`, `3–6 & 6–9mo={BE18438}`, `9–12mo={BE9558}`,
|
||||
`12–15mo={BE12599}`. The apparent "51% failure rate at 6–9 months" is entirely
|
||||
BE18438's single February 2026 episode. Five units with roughly one episode
|
||||
each cannot support a population trend. **Do not re-derive this.**
|
||||
|
||||
Also note: all affected units are calibrated on a **~12–13 month cadence**, so
|
||||
"sent to Instantel" is the routine annual schedule, not evidence of a
|
||||
fault-driven return.
|
||||
|
||||
---
|
||||
|
||||
## 7. Open questions
|
||||
|
||||
### Q1 — Is it a latched bad zero or analog degradation?
|
||||
The question that decides everything. A latched zero is correctable (possibly
|
||||
over the wire); degradation means a repair. Instantel's 2027–2069 rule implies
|
||||
*both* populations exist, with the split roughly 10/90 in the field.
|
||||
|
||||
**BE12599 is the natural experiment** — faulting as of 2026-08-23. Read its
|
||||
values, run the autozero, read them again.
|
||||
|
||||
### Q2 — Can we read the autozero numbers over the wire? (best lead)
|
||||
Instantel says to check *"the lists of numbers in the **X1 and X8 gains**"* —
|
||||
4 sensors × 2 gains = **8 channels**. The protocol reference already documents
|
||||
an unimplemented command with exactly that shape:
|
||||
|
||||
```
|
||||
SUB 0x0E -> RSP 0xF1 "channel sensor data"
|
||||
2-step read; channel selector in params[6:8] = 0x0000..0x0007
|
||||
data length 0x0A (10 bytes) per channel
|
||||
```
|
||||
|
||||
Blastware's *Unit Channel Test* sequence:
|
||||
`POLL×N → 0x15 → 0x01 → 0x08 → 0x01 → 0x0E×8 → 0x98×2 → 0x0E×8`
|
||||
— note the **second `0x0E` pass carries live ADC readings**.
|
||||
|
||||
**Hypothesis (untested):** `0x0E` returns the numbers Instantel wants compared
|
||||
against 2027–2069. If true, SFM could diagnose an offset remotely *and* predict
|
||||
whether a re-zero will succeed — converting a 10%/90% shipping gamble into a
|
||||
decision made before packing a box.
|
||||
|
||||
**How to test.** `bridges/ach_mitm.py` is a generic TCP proxy:
|
||||
|
||||
```bash
|
||||
python bridges/ach_mitm.py --bw-host <MODEM_IP> --bw-port 9034 --listen-port 9999
|
||||
```
|
||||
|
||||
Point Blastware at the proxy and run **Unit Channel Test**.
|
||||
⚠ In this topology the output filenames are reversed — the tool labels the
|
||||
*connecting* side "unit", so `raw_s3_*.bin` holds Blastware's bytes and
|
||||
`raw_bw_*.bin` the unit's.
|
||||
|
||||
Capture priority: (1) BE12599 while faulting, (2) a known-good unit as control,
|
||||
(3) before/after an autozero on the same unit. Eight 10-byte payloads with an
|
||||
expected value near 2048 is a very constrained puzzle.
|
||||
|
||||
### Q3 — What is the mild-offset rate?
|
||||
Unmeasurable from event files (§2). Only the A/D-mode check sees it. Would
|
||||
need a fleet sweep in A/D mode, or Q2 to succeed.
|
||||
|
||||
### Q4 — Does an offset recur on the same unit after service?
|
||||
BE9558 shows episodes in 2020 and 2026; BE18438 twice in four months. Suggestive
|
||||
of recurrence, but service records aren't in the data — only calibration dates.
|
||||
|
||||
---
|
||||
|
||||
## 8. Data and tooling
|
||||
|
||||
| what | where |
|
||||
|---|---|
|
||||
| detector | `scratch/offset_scan.py` |
|
||||
| current results | `/home/serversdown/dl2-archive/offset_archive.csv` |
|
||||
| earlier candidate list (Terra-View DB, 274 events) | `scratch/offset_candidates.csv` |
|
||||
| archive working copy | `/home/serversdown/dl2-archive/files/` |
|
||||
| archive source | NAS `DeathStar` 10.0.0.2, `/volume1/Uploads/TMI/DL2-Event-backup-8-25-26/Event/autocall home/` |
|
||||
|
||||
⚠ **The DL2 export keeps a byte-identical `Sent/` mirror of its root.** 13,077
|
||||
waveform paths are 6,577 distinct files. Always dedupe by basename — this
|
||||
doubled two reported figures before it was caught.
|
||||
|
||||
---
|
||||
|
||||
## 8b. The histogram corpus — the other 90% of the archive (2026-09-04)
|
||||
|
||||
Every result above §8 comes from **waveform** files. `offset_scan3.py` filters on
|
||||
`\.[A-Za-z0-9]{2}0[Ww]$`, so the corpus it scanned is 6,577 unique binaries. The
|
||||
archive also holds **63,535 unique histograms** — 9.7x more files — which the
|
||||
pre-trigger method cannot touch, because a histogram carries no samples: only a
|
||||
per-interval, per-channel peak and half-period.
|
||||
|
||||
`scratch/offset_hist_scan.py` scans them. **63,505 of 63,535 decoded (99.95%),
|
||||
43 units, 77.9M intervals.** Two of the 45 units have no histograms at all.
|
||||
Output: `/home/serversdown/dl2-archive/offset_hist.csv` (190,515 channel-rows).
|
||||
|
||||
### The premise, and how far it actually holds
|
||||
|
||||
A histogram file is hours of continuous monitoring, so most of its intervals are
|
||||
definitionally quiet, and a channel parked off zero cannot report a peak below
|
||||
its own displacement. The signal is real — two within-unit contrasts, siblings
|
||||
unmoved in both:
|
||||
|
||||
| unit | channel | in-episode floor | outside | waveform \|pre\| same window |
|
||||
|---|---|---|---|---|
|
||||
| BE18438 | Vert | 0.0350 | 0.0050 | +0.18 .. +0.37 |
|
||||
| BE12599 | Tran | 0.0250 | 0.0050 | +0.03 .. +0.49 |
|
||||
|
||||
But the **leakage from a waveform pedestal into the histogram floor is bimodal,
|
||||
not merely partial**: measured ratio ~0.9 on BE18438 Vert, ~0.7 on BE9558,
|
||||
**~0.02 on BE12599** — two orders of magnitude on one instrument. The device
|
||||
evidently measures each interval peak against a running baseline, and how much
|
||||
DC survives that varies per unit. **Consequence: a negative histogram result
|
||||
carries almost no information.** Do not read "clean in the histograms" as clean.
|
||||
|
||||
### The detector that survived
|
||||
|
||||
dmin(file, ch) = min[ch] - min over the other two geo channels, SAME file
|
||||
gates (both hard): n_intervals >= 60 AND mic_p5 <= 5 raw counts
|
||||
day statistic: median of dmin over that day's qualifying files
|
||||
flag day at dmin >= 0.020 in/s (4 A/D counts)
|
||||
episode at >= 3 CONSECUTIVE observed days
|
||||
|
||||
**Result: BE18438|Vert, BE9558|Tran, BE9558|Long.** Threshold-insensitive —
|
||||
the journal's own test for a real signal against a tuned one — and this is the
|
||||
first operating point in the investigation that passes it cleanly. The identical
|
||||
answer holds across: statistic `min` or `p5`; length gate 10/30/60/120/300; mic
|
||||
gate 3/5/8/10; threshold 0.015–0.035 (a 2.3x span); persistence K = 2,3,4,5,7.
|
||||
|
||||
Separation, ranked by highest floor sustained over 3 consecutive gated days
|
||||
across all 135 unit-channels:
|
||||
|
||||
| unit-channel | best3 |
|
||||
|---|---|
|
||||
| BE18438 Vert | 0.1650 |
|
||||
| BE9558 Long | 0.0350 |
|
||||
| BE9558 Tran | 0.0250 |
|
||||
| *(2.5x gap)* | |
|
||||
| BE7145 Tran | 0.0100 |
|
||||
| entire rest of fleet | <= 0.0050 (one quantisation count) |
|
||||
|
||||
Day-level false alarm: **37 of 99,432 gated unit-channel-days = 0.037%.**
|
||||
|
||||
### What it does NOT do — read this before trusting it
|
||||
|
||||
- **It finds 2 of the 5 confirmed units, not 5.** The site-quiet gate is what
|
||||
makes it work and it is also what costs BE11529 and BE12599. BE11529's
|
||||
four-day single-axis ramp (Tran 0.025 -> 0.055, both siblings pinned at 0.005)
|
||||
is the most offset-shaped thing in the corpus outside the two detections, and
|
||||
the gate discards it.
|
||||
- **The positive class is two units.** Every threshold here is fitted to
|
||||
BE18438 and BE9558, which contribute 22 of the 37 flagged days in the entire
|
||||
corpus. No cross-validation is possible at n=2.
|
||||
- **Per-channel attribution is NOT established.** Rotating the three geo channel
|
||||
labels within each file — preserving every value, file and day, destroying
|
||||
only channel identity — reproduces the episode *count* with p = 0.769 and the
|
||||
label agreement at p = 0.038–0.077. Report a **unit and a window**; do not
|
||||
name a geophone axis on the strength of this detector alone.
|
||||
- **Timing resolution is ~1 month, not ~1 day.** A 30-day label shift still
|
||||
scores 2 of 9 episode hits; the signal dies only past ~60 days. The day-level
|
||||
series look far crisper than they are.
|
||||
- **Ground truth here is a sibling detector, not a service record.** Agreement
|
||||
between the two corpora is corroboration of a shared method. Nothing in this
|
||||
section has been checked against an actual repair, calibration or RMA.
|
||||
|
||||
### Dead ends — keep these dead
|
||||
|
||||
- **Absolute floor (min / p1 / p5 / p10 / p25, thresholded alone) — RETIRED.**
|
||||
Not fleet-comparable and mostly not about the channel. Scoring each cell using
|
||||
*only the other two channels* — a statistic containing zero information about
|
||||
the suspect channel — reaches AUC 0.746 against the same labels, versus 0.872
|
||||
for the absolute floor itself. **66% of its apparent discrimination is "that
|
||||
day was noisy at that site."** Interval size alone moves its p99 7x (0.0350 at
|
||||
1 min vs 0.0050 at 2 s). And of all files with any channel above 0.025, 56.5%
|
||||
have **all three** channels above it — common-mode, i.e. the wrong physics.
|
||||
- **Zero-fraction — STRUCTURALLY IMPOSSIBLE, not merely weak.** The device never
|
||||
reports a zero histogram interval peak. The value is a max over hundreds of
|
||||
samples of a channel that always carries at least 1 count of noise, so it is
|
||||
clamped at 1 A/D count (0.005 in/s). There is no zero to count.
|
||||
- **Interval size, sample rate, geo range, firmware — refuted as confounds for
|
||||
the differential.** All four are *file-level scalars*: they move all three geo
|
||||
channels together, so they cannot produce a single-channel lift and the
|
||||
within-file differential is immune to them by construction. Geo range is
|
||||
identical across the three geo channels in **63,535 of 63,535** binaries.
|
||||
(Interval size remains fatal to the *absolute*-floor version, above.)
|
||||
|
||||
### Two findings that are independent of the histogram detector
|
||||
|
||||
**1. `offset_scan3.py`'s `spread <= 0.02` gate is discarding real signal.**
|
||||
It rejects **113 of the 600 channel-rows with |pre| >= 0.025 (18.8%)**, and the
|
||||
rejections are not random — 92 of them fall across 41 unit-channels currently
|
||||
labelled NEGATIVE. Four would become sustained positives under an
|
||||
amplitude-only >=3-consecutive rule: **BE12599|Long (run of 8), BE18003|Vert
|
||||
(4), BA10895|Vert (3), BE12844|Tran (3).** Until this is re-cut, the fleet label
|
||||
is **three-state — POSITIVE / NEGATIVE / SPREAD-REJECTED(unknown)** — and the
|
||||
third state should be excluded from both TP and FP counts rather than silently
|
||||
scored as healthy. Every precision figure computed against the two-state label,
|
||||
in this section and in §3, is affected.
|
||||
|
||||
**2. The waveform corpus sees ~7% of the days a unit was deployed.** 2,627
|
||||
(unit, day) observations against the histogram corpus's 35,105 — 13.4x — with a
|
||||
per-unit median ratio of 0.070. BE12599, a confirmed unit, is waveform-observed
|
||||
on 39 of its 1,666 histogram-observed days (**2.3%**). Any statement of the form
|
||||
"the fault was absent before date X" that rests on waveform coverage alone is
|
||||
much weaker than its event count suggests.
|
||||
|
||||
### BA10895 — reclassified (see also §4)
|
||||
|
||||
Previously dismissed as a transient. The histogram record shows its **Vert**
|
||||
quiet-minute floor at 0.005 on 62/62 qualifying files from 2023-07-07, then
|
||||
0.010–0.015 on 48/58 files from 2023-08-03 to 08-27, while Tran moves on 2/58
|
||||
and Long on 9/58 and the site mic floor never leaves 1–3 counts. Independently,
|
||||
**42 of its 85 waveform events (49.4%) are single-axis-dominant** — one geo peak
|
||||
>= 10x both siblings and >= 0.05 in/s — the **highest rate in the 45-unit
|
||||
fleet** (BE13117 36.1%, BE18438 29.4%), and **100% of it on Vert**. Vert
|
||||
excursions of 0.1–1.5 in/s with Tran/Long at 0.005–0.035 are not ground motion.
|
||||
|
||||
This is a genuine Vert-channel hardware fault, but **not the classic pedestal** —
|
||||
the differential is only one A/D count. Caveat: its entire histogram record is a
|
||||
single 52-day deployment ending 2023-08-27, so nothing says whether it
|
||||
persisted, was serviced, or resolved.
|
||||
|
||||
The other six marginal units — BE11007, BE17354, BE18004, BE18104, BE9557,
|
||||
BE18003 — are **clean**. All seven cap at +0.005 to +0.007 (one A/D count)
|
||||
lifetime under the quiet-site gate, against +0.175 for BE18438 Vert and +0.062
|
||||
for BE9558 Long. Three individual waveform flags fall in windows with **zero**
|
||||
histogram coverage and are NO-DATA, not clean: BE18004|Tran 2024-10-16,
|
||||
BE9557|Tran 2021-06-28, BE9557|Vert 2025-06-12.
|
||||
|
||||
### Still open in this section
|
||||
|
||||
- **The 11 thin-coverage units were not screened** (BE10202, BE11462, BE13779,
|
||||
BE15760, BA15957, BE16754, BE16758, BE8081, BE8626, BA9229, BE9887 — each
|
||||
under 20 waveform events, several with hundreds of histograms). This is the
|
||||
population most likely to hold a previously unknown offset, and it is the one
|
||||
slice of the plan that did not run. BE11462 was incidentally scored clean by
|
||||
the full-archive pass; BE10202 has no histogram files at all.
|
||||
- **No completeness audit was run** over the above.
|
||||
- Re-cutting the ground truth three-state (finding 1) and re-scoring everything
|
||||
against it.
|
||||
|
||||
---
|
||||
|
||||
## 8c. Mechanism — five hypotheses tested, all dead (2026-09-06)
|
||||
|
||||
**The mechanism is still unknown.** Five campaigns, ~105 effectively independent
|
||||
tests, seven nominally significant results against **5.2 expected by chance**
|
||||
under a global null. Every one died to its own confound analysis. What the
|
||||
campaign bought is a set of *shape constraints* and a long list of dead ends.
|
||||
|
||||
### ⚠ Two things retracted from this journal
|
||||
|
||||
**1. "Polarity is perfectly consistent — 11 of 11, zero mixed cases."** That is
|
||||
a **tautology of the spread gate**, not a property of the fault. `spread <= 0.02`
|
||||
requires pre/mid/end to agree, which forces one sign. Amplitude-only at the same
|
||||
0.025 threshold: **12 of 53 unit-channels are mixed**, including BE18438|Vert
|
||||
(88+/1−) and BE9558|Vert (1+/35−). Withdrawn.
|
||||
|
||||
**2. "5 of 45 units, unchanged across a 2x threshold range."** The
|
||||
threshold-insensitivity is also a property of the gate. Amplitude-only gives
|
||||
**9 units at 0.020, 8 at 0.025** (adding BA10895, BE12844, BE18003), 5 at 0.040.
|
||||
The fleet is **8–9 units, not 5**.
|
||||
|
||||
**3. "Persistent — it stays until the geophone is serviced."** Weakened, not
|
||||
withdrawn. There are **23 recoveries after runs of >=3 flagged events, median
|
||||
gap 6.03 days**, three inside ten minutes. BE18438|Vert reads `pre=mid=end=
|
||||
+0.0000` on 2026-02-10, +0.185→+0.370 across 02-25/26, and `+0.0000` again on
|
||||
2026-03-22 — identical Project, Seis Loc, calibration date, geo range and
|
||||
trigger throughout. The one thing that cannot be excluded is a **field
|
||||
autozero**: it is a button sequence at the unit and writes nothing into the
|
||||
event header. So "persistent" may be "persistent unless somebody pressed the
|
||||
buttons," and the archive cannot tell those apart.
|
||||
|
||||
### The one positive finding: onset is a RAMP, minutes to hours
|
||||
|
||||
Both onsets resolvable at minute cadence are ramps. **BE18438|Vert,
|
||||
2026-02-20** — the histogram corpus collapses a 14 d 21 h waveform bracket to
|
||||
**one minute**:
|
||||
|
||||
```
|
||||
~14,200 consecutive quiet minutes at 0.000–0.005 (ten full daily files)
|
||||
09:32 +0.005 09:39 +0.045 10:20 +0.125 16:00 +0.165
|
||||
09:33 +0.010 09:42 +0.070 13:13 +0.150 20:17 +0.185 plateau
|
||||
```
|
||||
|
||||
**50% of the excursion in 7 minutes**, the rest asymptotic over ~10 h, **>=25
|
||||
distinct one-minute intermediates**. Validated **75/75** against Blastware's own
|
||||
ASCII export. Its 2025-11-15 onset is the same shape over 2.7 h. BE13117 stage B
|
||||
is a 91-minute monotone rise, +0.035 → +1.745 in/s over ~40 samples.
|
||||
|
||||
**This kills both poles of the original dichotomy** (journal Q1): not an
|
||||
instantaneous latched step (a bad autozero, a stuck trim-DAC), and not slow
|
||||
component degradation over days or weeks.
|
||||
|
||||
⚠ It rests on **2 of 45 instruments**. Clopper-Pearson on 4/4 resolved onsets
|
||||
gives 95% CI [0.40, 1.00] — a mixed population with up to 60% true steps is not
|
||||
excluded. BE13117 has zero paired ASCII, so its ramp rests on our decoder alone.
|
||||
|
||||
### The methodological corollary — more important than the finding
|
||||
|
||||
**A waveform-only bracket manufactures the appearance of a step, and the spread
|
||||
gate is blind to onsets by construction.**
|
||||
|
||||
The offset is what fires the trigger, so no waveform event can exist until the
|
||||
ramp has nearly reached the trigger level. BE18438's first event of each episode
|
||||
sits at 0.280 against a 0.300 trigger, and 0.185 against 0.200. At daily cadence
|
||||
against a 3 h ramp, P(catching an intermediate) = **0.125**.
|
||||
|
||||
And `spread <= 0.02` rejects any record in which the floor is *moving* — which
|
||||
is exactly what an onset is. **The gate rejected the very BE18438 record where
|
||||
the ramp is visible.** If the operational goal is catching a fault early, before
|
||||
the unit floods the store with junk events, the current detector is the wrong
|
||||
shape for the job.
|
||||
|
||||
### The surviving shape
|
||||
|
||||
An **electrical, reversible, two-time-constant settling process** (~10 min and
|
||||
~hours), saturating at a ceiling, with occasional sub-3-minute discrete jumps
|
||||
superposed (BE18438 2026-02-26: 13:24 pre +0.180 / mid +0.240 / end +0.255 →
|
||||
13:27 +0.325, identical metadata). That is the signature of a **bias or leakage
|
||||
path charging a high-impedance node** — the class of fault Instantel's autozero
|
||||
recovers ~10% of the time, and what the X1/X8 gains measure.
|
||||
|
||||
**It is a shape constraint, not a mechanism. Do not write it up as one.**
|
||||
|
||||
### Dead — with the evidence, so none of this is re-derived
|
||||
|
||||
| Killed | Evidence |
|
||||
|---|---|
|
||||
| **Latched step at onset** | >=25 one-minute intermediates over ~10 h, ASCII-validated. Direct observation, not a test. |
|
||||
| **Slow degradation over days/weeks** | Same observation — bulk of the excursion in 7 min to 2.7 h. |
|
||||
| **Thermal driving of pedestal magnitude** | BE13117, 365-count pedestal, n=128: full-day modulation **−0.42% ± 0.42%**, 95% CI [−1.25%, +0.40%]. Healthy-fleet seasonal zero drift totals **~0.3 A/D counts** — 15x to 1200x too small. Best-powered result in the campaign. |
|
||||
| **Ground-motion shock** | 30-day window-max percentile ranks 0.03/0.98/0.15/0.01/0.68/0.24, median **0.194** against a null of 0.5. **0 of 7 events >=9 in/s** was followed by an onset within 30 d. BE12599 hit 10.220 in/s (2023-11) and 10.005 (2025-04) and did not onset until 2026-08-14. |
|
||||
| **Handling / redeployment** | **0 of 9** onsets had a Project/Client/Seis Loc change. Widened to 30 d: 2 observed vs 4.90 expected, P(X>=2)=0.995 — *depleted*, the wrong direction. The apparent gap effect (p=0.035) died on histogram coverage: BE18438's "59.7-day gap" contains 122 histogram files; true silence 0.52 d. |
|
||||
| **Mechanical resonance / damping change** | BE18438|Vert at a 64-count pedestal (3x outside Instantel's ±21): ΔTest-Freq **CI [−0.090, +0.021]** against 0.127 Hz for a real calibration. Block permutation p=0.658. |
|
||||
| **Accumulated-duty threshold** | ~4 clean units logged more monitoring than the largest positive onset dose; BE18193 logged **13.45M intervals, 6.2x**. A counterexample — no power argument weakens it. |
|
||||
| **Firmware** | **14,338 of 14,340** exports read `V 10.72-8.17`. A constant cannot explain a variable. |
|
||||
| **Unit age** | Serial rank-sum 118.0 vs null 115.0, p=0.549; unchanged on the 8-unit re-cut (p=0.586). Serial is a poor age proxy anyway (Spearman +0.113 against archive entry). |
|
||||
| **Strong seasonal clustering** | 25 onsets, exposure-weighted permutation **p=0.59**. Excludes >=75%-in-one-season only; a 2x seasonal hazard is *not* excluded. |
|
||||
|
||||
Also retire two overstated bounds. H6's dose-response exclusion "|r| > 0.03" is
|
||||
a **10x overstatement** once clustering is corrected — the honest bound is
|
||||
|r| > 0.1–0.3, so a real r=0.2 is not excluded. And **any statistic quoted
|
||||
per-event**: 512 flagged channel-events collapse to **4.9 effective independent
|
||||
observations** (unequal-cluster design effect 104.6 at ICC=1), and **55% of the
|
||||
flagged corpus is one instrument on two calendar days** (BE13117, 2023-05-03/04).
|
||||
|
||||
### Power — read every negative in this section as bounded
|
||||
|
||||
Fisher exact, 5 positives of 45, one-sided α=0.05, exposure a third of the fleet:
|
||||
|
||||
| relative risk | power |
|
||||
|---|---|
|
||||
| 1.5 | 0.059 |
|
||||
| 2 | 0.112 |
|
||||
| 3 | 0.231 |
|
||||
| 6 | 0.497 |
|
||||
| 15 | 0.753 |
|
||||
|
||||
80% power needs **RR ≈ 13–20**. Even a *perfect* split reaches p<0.05 only if
|
||||
the exposed group is <=25 of 45 units. **This archive can detect only
|
||||
near-deterministic unit-level causes.** Every negative above excludes a strong
|
||||
effect, not a real one.
|
||||
|
||||
### What this archive can NEVER answer
|
||||
|
||||
- **The A/D zero and the X1/X8 gains.** The 2027–2069 numbers appear in no file,
|
||||
header or decoded record. They exist only on a live device behind `SUB 0x0E`.
|
||||
Q1 is structurally unanswerable from data.
|
||||
- **Unit-level vs component-level cause.** **Zero of 14,340** exports carry a
|
||||
geophone or sensor serial. Q4 is dead — there is no way to know whether the
|
||||
same physical geophone came back after service.
|
||||
- **Service history.** The only service-adjacent field is `Calibration: <date>`
|
||||
— 30 distinct dates fleet-wide, none before 2023, ASCII corpus entirely
|
||||
2025–26. BE9558's 2020 and BE13117's 2023 episodes have no calibration record.
|
||||
- **Temperature.** Zero exports carry it. Battery Level is a verified coarse
|
||||
thermometer (+0.204 V winter over summer, 20/20 unit-years, p=9.5e−7, matching
|
||||
lead-acid tempco) but quantised at 0.1 V ≈ 10 °C — useless within a day. The
|
||||
archive can *bound* thermal; it can never *test* it.
|
||||
- **BE13117 specifically** — 55% of the flagged corpus, the largest pedestal at
|
||||
1.92 in/s, **zero** ASCII exports, histogram record ending eight months before
|
||||
its episode. The most informative case in the archive is permanently outside
|
||||
every metadata test.
|
||||
- **The mild-offset rate**, and therefore the base rate's denominator. Event
|
||||
files only see offsets large enough to dominate the trace.
|
||||
|
||||
### The experiment to run — `SUB 0x0E`, one afternoon
|
||||
|
||||
Point Blastware at `bridges/ach_mitm.py` and run **Unit Channel Test** against
|
||||
(1) a faulting unit, (2) a known-good control, (3) the same unit before and
|
||||
after an autozero. BW's sequence is `0x0E x8 → 0x98 x2 → 0x0E x8`, the second
|
||||
pass carrying live ADC. Eight 10-byte payloads with expected values near 2048 is
|
||||
a very constrained puzzle.
|
||||
|
||||
- **Proves:** whether the X1/X8 gains are readable over the wire, and whether
|
||||
the fault sits at or upstream of the ADC zero reference. Gains walk out of
|
||||
2027–2069 with the pedestal → the fault *is* the zero reference, Q1 answered.
|
||||
Gains hold while the trace moves → the fault is downstream, look at the front
|
||||
end.
|
||||
- **§8c hands it a falsifiable time course:** poll at ~1-minute cadence and the
|
||||
numbers should **ramp over minutes-to-hours, not step**. If they step while
|
||||
the trace ramps, the two are decoupled.
|
||||
- **Payoff:** converts the 10%/90% ship-it-or-not gamble into a decision made
|
||||
before packing a box, remotely, for the whole fleet.
|
||||
- ⚠ In the MITM topology filenames are reversed — `raw_s3_*.bin` holds
|
||||
Blastware's bytes.
|
||||
|
||||
**Second: swap the geophone** between a faulted base and a healthy one. Fault
|
||||
follows the sensor → element or cable. Fault stays with the base → front-end
|
||||
board. One afternoon, zero code, and it settles the one question the archive is
|
||||
permanently blind to.
|
||||
|
||||
**Third: log a faulting unit for 72 h untouched.** Every recovery we have is
|
||||
confounded by a possible field autozero. A shelf and a logger settles whether
|
||||
the fault genuinely self-reverses.
|
||||
|
||||
**Fourth, free: re-cut the fleet label** — drop the spread gate, re-score
|
||||
amplitude-only, screen the 11 unscreened thin-coverage units. Might reach 9–10
|
||||
positives. Be honest about the gain: power against "older half carries 3x the
|
||||
hazard" rises only 0.23 → 0.30.
|
||||
|
||||
**Highest-value item overall, and not an experiment: the RMA/repair records.**
|
||||
Which unit went back, when, what was done (autozero vs geophone replaced vs
|
||||
board), and the geophone serial fitted. "Same channel after a documented
|
||||
geophone *replacement*" is component-level-negative in one observation.
|
||||
|
||||
---
|
||||
|
||||
### 8d. The non-motion test — Brian's "it doesn't cross zero" (2026-09-07)
|
||||
|
||||
Looking at BE12599's 2026-08-09 event, Brian noted it reports no ZC frequency
|
||||
**because the trace never crosses zero**. That observation is the best detector
|
||||
in this investigation, and it comes from physics rather than a threshold.
|
||||
|
||||
A geophone is a velocity sensor with no DC response, so its output over a record
|
||||
must integrate to ~zero — the ground does not relocate. Real motion therefore
|
||||
sits roughly half below zero. Anything electrical is one-sided.
|
||||
|
||||
mp = |mean| / peak ~0 for motion, ~1 for a fault
|
||||
frac_neg = share of samples < 0
|
||||
|
||||
`scratch/nonmotion_scan.py`, all 6,577 waveforms, 19,731 channel-rows.
|
||||
Restricted to peak >= 0.05 in/s (n = 12,068), the distribution is **bimodal
|
||||
with an empty middle**:
|
||||
|
||||
| mp band | channel-events |
|
||||
|---|---|
|
||||
| 0.0–0.1 | 11,384 |
|
||||
| 0.1–0.2 | 293 |
|
||||
| **0.15–0.85 (dead zone)** | **131 = 1.09%** |
|
||||
| 0.9–1.0 | 278 |
|
||||
|
||||
At `mp >= 0.8` with >=3 events it returns **exactly the five confirmed units** —
|
||||
BE9558, BE11529, BE12599, BE13117, BE18438 — stable from 0.5 to 0.9. Two
|
||||
detectors on entirely different principles agreeing on the unit list is the
|
||||
strongest corroboration that list has.
|
||||
|
||||
**BE11007 is settled: NOT an offset.** It reaches mp 0.75–0.89, but with
|
||||
`frac_neg = 0.99` at peaks of **7.4–9.4 in/s** — parked *negative* during a
|
||||
near-full-scale blast. §4's guess was right. `mp` alone cannot separate a
|
||||
pedestal from a large one-sided blast; pair it with a peak ceiling or with
|
||||
sign-consistency across events.
|
||||
|
||||
⚠ **Not a rediscovery of the retracted v1 detector.** v1 scored only the
|
||||
largest-peak axis and used the mean as a *baseline estimator* where the median
|
||||
was required. Here the mean is the signal itself, per channel — that is what the
|
||||
physics licenses.
|
||||
|
||||
**Correction to §8c.** That section says the spread gate is "blind to onsets by
|
||||
construction." Too strong: of 87 BE18438|Vert events at mp >= 0.5 the gate
|
||||
rejected **one** — the transitional record. It does not lose onsets
|
||||
systematically; it loses the transition specifically.
|
||||
|
||||
### 8e. BE12599 — a connector, not a geophone (2026-09-07)
|
||||
|
||||
Waveform shapes across its August episode, measured rather than eyeballed:
|
||||
|
||||
| date | channel | shape |
|
||||
|---|---|---|
|
||||
| Aug 09 05:29 | Long | **unipolar +**, 0/2304 samples below zero, decay tau **26 ms** |
|
||||
| Aug 09 05:35 | Long | unipolar +, 3 spikes at irregular gaps (744, 1032 ms), tau **38 ms** |
|
||||
| Aug 14 05:00 | Long | single lobe, bipolar, tau **118 ms** |
|
||||
| Aug 17–23 | Tran | **flat DC pedestal**, sd/level 0.015–0.020, 0 zero crossings |
|
||||
|
||||
**Unipolar impulses with an RC tail are not mechanical.** Fast rise, exponential
|
||||
decay, one polarity, irregular timing — that is charge dumped into a
|
||||
capacitively-coupled input and draining through the input resistance. The
|
||||
progression 26 ms -> 118 ms -> never recovers, over 14 days, is a leakage path
|
||||
worsening.
|
||||
|
||||
**And the fault moved channels** — Long on Aug 9/14, Tran on Aug 17–23, Long
|
||||
again on Aug 21 (1.065 in/s) while Tran held its pedestal. Vert stayed clean
|
||||
throughout. **A failing geophone element cannot hop channels. A connector can.**
|
||||
|
||||
That single fact explains what had been puzzling:
|
||||
- **The sensor self-check keeps passing** (7.4/7.5/7.6 Hz, ratios 3.6–4.2, all
|
||||
four channels Passed, on the very events where Long throws 0.5 in/s spikes).
|
||||
The swing test drives the element; the element is fine. The fault is in the
|
||||
wiring to it.
|
||||
- **Why Instantel's autozero fixes only ~10%** — it cannot fix a connector.
|
||||
- **Why onset "ramps" over minutes to hours** — contact resistance drifting.
|
||||
|
||||
All seven Aug 17–23 events are stamped **05:00:14**, the same second, and their
|
||||
filename extensions run `8E → WE → KE → 8E → WE → KE → 8E` — the documented
|
||||
3-day cycle for a fixed daily time. Clock-scheduled, not physically triggered:
|
||||
the modem powers up, draws a surge, and a marginal connection responds.
|
||||
|
||||
**Field action: inspect and photograph the geophone connector BEFORE reseating
|
||||
anything** — an intermittent contact clears the moment it is disturbed.
|
||||
|
||||
⚠ Scoped to BE12599. BE18438's onset was a smooth 7-minute ramp with no spikes,
|
||||
which looks like a different failure mode wearing the same signature.
|
||||
|
||||
---
|
||||
|
||||
### ⚠ Serial prefixes — four of these units are BlastMates, not MiniMates
|
||||
|
||||
Corrected 2026-09-06, after Brian queried "BA10895?" against a report that
|
||||
said BE10895. He was right. The BW filename encodes the serial **number
|
||||
only** — `L895` -> 10895 — and every offset scanner synthesised the family
|
||||
prefix as `"BE"`. Four of the 43 archive units are **BA** (BlastMate, the
|
||||
MiniMate Plus's bigger sibling; same Series III, byte-identical data):
|
||||
|
||||
**BA9229, BA10060, BA10895, BA15957.**
|
||||
|
||||
Read off the file bodies, which carry the serial verbatim. No analysis
|
||||
changed — grouping was always on the numeric part, and no unit number maps
|
||||
to two serials — but every earlier reference to "BE10895" and the other
|
||||
three is a label error and has been corrected throughout this document.
|
||||
|
||||
The same assumption was live in two production sites and is fixed
|
||||
(`sfm/waveform_store.py`, `minimateplus/client.py`): the store would have
|
||||
filed a BlastMate under a unit that does not exist, and the monitor-log
|
||||
decoder lost the geo threshold along with the serial. See commit `9ceff65`.
|
||||
|
||||
---
|
||||
|
||||
## 9. Chronology
|
||||
|
||||
| date | event |
|
||||
|---|---|
|
||||
| 2026-08-25 | Reported as a *waveform decode bug* — traces with a DC offset. Investigation shows the offset is **real device data**; the decoder is correct. |
|
||||
| 2026-08-25 | Brian relays his dad's description: a known hardware fault called an "offset"; usually sent to Instantel. |
|
||||
| 2026-08-25 | First detection pass over the Terra-View DB: **2 of 21 units**, 274 events, 11 months. Flagged as vulnerable to survivorship bias — flooded events were routinely deleted. |
|
||||
| 2026-08-25 | Condensation hypothesis proposed, then **killed by its own controls**. |
|
||||
| 2026-08-25 | Parked pending the multi-year archive. |
|
||||
| 2026-08-28 | DL2 archive pulled (33 GB, 546k files; 6.6 GB working set). |
|
||||
| 2026-08-28 | Archive scan: **6 of 45 units**, 283 events, 15 episodes. Prior base rate **confirmed**, not overturned. |
|
||||
| 2026-08-28 | Clipping ruled out; `m/p` established as the discriminator; BE11007 reclassified as probably a real blast. |
|
||||
| 2026-08-28 | Calibration-timing correlation attempted and **rejected as confounded**. |
|
||||
| 2026-08-28 | Instantel FAQs supplied: autozero procedure, the **2027–2069** window, the **>5 counts** threshold. Explains the ~10% re-zero success rate. |
|
||||
| 2026-08-28 | Bimodality established; sensor check proven **blind** to offsets; `SUB 0x0E` identified as the best open lead. |
|
||||
| 2026-08-28 | **v1 detector retracted.** Brian challenged the "come and go" finding against field experience. Two flaws found: dominant-axis-only scoring and mean-instead-of-median. Corrected detector shows persistent pedestals on **8 of 45 units**, and the gaps are service windows. |
|
||||
| 2026-08-28 | **Detector v3 (Brian's method):** pre-trigger floor + pre/mid/end consistency. Healthy channels proven to sit at 0.000 +/-1 unit (94.5%), confirming no decoder zero-point bias. Final: **5 of 45 units (11%)**, threshold-insensitive. |
|
||||
| 2026-09-04 | **Histogram corpus scanned** — 63,505 of 63,535 files, 43 units, 77.9M intervals (9.7x the waveform corpus). `scratch/offset_hist_scan.py`. |
|
||||
| 2026-09-04 | Absolute-floor statistic **retired**: 66% of its discrimination is a day/site confound (other-channels-only AUC 0.746 vs 0.872). Zero-fraction shown **structurally impossible** — the device clamps every interval peak at >= 1 count. |
|
||||
| 2026-09-04 | Site-quiet-gated cross-channel differential established: **BE18438 Vert, BE9558 Tran+Long**, threshold-insensitive over a 2.3x span. Finds only **2 of the 5** confirmed units — leakage into the histogram floor is bimodal (0.9 to 0.02), so a negative result carries almost no information. Per-channel attribution **not** established (channel-scramble p = 0.769). |
|
||||
| 2026-09-04 | **BA10895 reclassified** from transient to a genuine Vert fault of a different subtype — 49.4% single-axis-dominant events, the highest in the fleet, 100% on Vert. The other six marginal units are clean. |
|
||||
| 2026-09-04 | **Defect found in `offset_scan3.py`**: its `spread <= 0.02` gate discards 18.8% of rows with \|pre\| >= 0.025, concentrated on 41 negative unit-channels; 4 would be sustained positives without it. The fleet label is three-state, not two. |
|
||||
| 2026-09-06 | **Four units relabelled BA, not BE** — BA9229, BA10060, BA10895, BA15957 are BlastMates. The BW filename carries only the serial number; the family prefix must be read from the file body. Fixed in the scanners and in two production sites. |
|
||||
| 2026-09-06 | **Mechanism campaign — five hypotheses, all dead.** Thermal, ground-motion shock, handling/redeployment, accumulated duty, unit age, firmware and a mechanical element fault are each refuted or bounded. 7 nominally significant results against 5.2 expected by chance. |
|
||||
| 2026-09-06 | **Onset is a RAMP of minutes-to-hours, not a step** — BE18438 Vert resolved to one-minute cadence, 50% of the excursion in 7 min, >=25 intermediates, ASCII-validated 75/75. Kills both a latched digital step AND slow component degradation. Surviving shape: a reversible two-time-constant settling process — a bias/leakage path charging a high-impedance node. |
|
||||
| 2026-09-06 | **Polarity consistency RETRACTED** (a tautology of the spread gate; amplitude-only gives 12 of 53 unit-channels mixed) and the fleet **re-cut to 8–9 units, not 5**. "Persistent until serviced" weakened: 23 recoveries, median gap 6 days — though a field autozero cannot be excluded. |
|
||||
| 2026-09-06 | The spread gate is **blind to onsets by construction** — it rejects a moving floor, which is what an onset is. It rejected the very record in which the ramp is visible. |
|
||||
| 2026-09-07 | **The non-motion test** (Brian: "it doesn't cross zero"). `\|mean\|/peak` is bimodal with a 1.09% dead zone and returns exactly the 5 confirmed units from physics, not a threshold. Independent corroboration of the unit list. **BE11007 settled as NOT an offset** — a one-sided 9 in/s blast. |
|
||||
| 2026-09-07 | **BE12599 is a connector fault, not a geophone fault.** Unipolar spikes with a 26→118 ms RC tail progressing to a flat pedestal, and the fault MOVES between Long and Tran while the sensor self-check passes on every event. An element cannot hop channels; a connector can. Inspect before reseating. |
|
||||
@@ -0,0 +1,135 @@
|
||||
# USBM RI8507 / OSMRE Blasting Compliance Curve — Reference
|
||||
|
||||
Reference for the **velocity-vs-frequency blasting compliance chart** Blastware
|
||||
draws on its Event Report ("USBM RI8507 And OSMRE"), and how seismo-relay
|
||||
reproduces it. Implemented in [`sfm/compliance.py`](../sfm/compliance.py); the
|
||||
spectral (FFT) side lives in [`waveform_fft.py`](../waveform_fft.py).
|
||||
|
||||
Reverse-engineered 2026-09-14 against 7 BE12844 (MiniMate Plus) events, each
|
||||
with a Blastware Event Report + FFT Report as ground truth. Curve values from
|
||||
USBM RI8507 Appendix B and 30 CFR 816.67.
|
||||
|
||||
---
|
||||
|
||||
## What it is
|
||||
|
||||
Two closely-related sources for the same limit curve:
|
||||
|
||||
- **USBM RI8507** — Bureau of Mines *Report of Investigations 8507* (Siskind
|
||||
et al., 1980), *"Structure Response and Damage Produced by Ground Vibration
|
||||
From Surface Mine Blasting."* The curve is **Figure B-1**, Appendix B
|
||||
("Alternative Blasting Level Criteria"), p.73–74.
|
||||
- **OSMRE / OSM** — the Office of Surface Mining Reclamation and Enforcement
|
||||
codified it as **30 CFR 816.67, Figure 1**. "CFR" = the U.S. Code of Federal
|
||||
Regulations. Same curve, regulatory force.
|
||||
|
||||
The chart plots each geophone channel's significant vibration cycles as
|
||||
`(frequency, peak velocity)` points against this limit. A point **below** the
|
||||
line passes; **above** fails.
|
||||
|
||||
---
|
||||
|
||||
## The limit curve
|
||||
|
||||
A structure has a resonance band (~4–12 Hz for whole structures) where it is
|
||||
most vulnerable, so the safe velocity is **lower** at those frequencies and
|
||||
**higher** away from them. The curve captures this by alternating two kinds of
|
||||
bound:
|
||||
|
||||
- **Constant-velocity** segments — a flat horizontal line at a fixed PPV.
|
||||
- **Constant-displacement** segments — a fixed peak *displacement* `d`. For
|
||||
simple harmonic motion, peak velocity `v = 2πf·d`, so on a velocity-vs-
|
||||
frequency **log-log** plot this is a straight line of slope +1 (velocity rises
|
||||
with frequency). This is why the low- and high-frequency bounds are sloped.
|
||||
|
||||
### Two lines — structure type
|
||||
|
||||
RI8507 gives two lines for two interior-wall constructions (Table 13, p.67):
|
||||
|
||||
| line | construction | plateau PPV |
|
||||
|---|---|---|
|
||||
| **Drywall** (solid) | modern gypsum wallboard | **0.75 in/s** |
|
||||
| **Plaster** (dashed) | older plaster on wood lath | **0.50 in/s** |
|
||||
|
||||
Plaster-on-lath is more damage-prone, hence the lower limit. You apply **one**
|
||||
line depending on the monitored structure.
|
||||
|
||||
### The four segments (Figure B-1, p.74)
|
||||
|
||||
Going low → high frequency, each line is:
|
||||
|
||||
1. **Ultimate low-frequency bound** — constant displacement **0.030 in**
|
||||
(`v = 2πf·0.030`). Only relevant below ~4 Hz.
|
||||
2. **Plateau** — constant velocity **0.75** (Drywall) / **0.50** (plaster) in/s.
|
||||
3. **Rising diagonal** — constant displacement **0.008 in** (`v = 2πf·0.008`),
|
||||
climbing from the plateau up to the high-frequency cap.
|
||||
4. **High-frequency cap** — constant velocity **2.0 in/s** above ~40 Hz.
|
||||
|
||||
The segments are drawn **continuous**: each bound is used over the frequency
|
||||
range where it is the binding (lowest) limit, and consecutive bounds meet where
|
||||
they are equal — so there are no vertical steps. Transition frequencies come
|
||||
straight from the values (`f = V / (2π·d)`):
|
||||
|
||||
| transition | formula | Drywall | Plaster |
|
||||
|---|---|---|---|
|
||||
| 0.030 in → plateau | `V_mid / (2π·0.030)` | 3.98 Hz | 2.65 Hz |
|
||||
| plateau → 0.008 in | `V_mid / (2π·0.008)` | 14.92 Hz | 9.95 Hz |
|
||||
| 0.008 in → 2.0 in/s | `2.0 / (2π·0.008)` | 39.79 Hz | 39.79 Hz |
|
||||
|
||||
Because both lines share the same **0.008 in** rising diagonal, above ~15 Hz
|
||||
they lie on the *same* line (both reach 2.0 in/s at ~40 Hz) — RI8507's literal
|
||||
construction merges them there. Blastware renders the dashed line as a separate
|
||||
parallel diagonal, but that is cosmetic: above ~15 Hz both structure types carry
|
||||
the identical limit, so compliance is unaffected.
|
||||
|
||||
> ⚠ RI8507's *Table 13* is a simpler two-range criterion with a **sharp
|
||||
> discontinuity at 40 Hz** (flat plateau, then a jump to 2.0). Figure B-1 is the
|
||||
> **smoothed** version that adds the 0.008 in transition — that is the one drawn
|
||||
> on reports and implemented here.
|
||||
|
||||
---
|
||||
|
||||
## The compliance scatter (the points)
|
||||
|
||||
The cloud is **not** the FFT spectrum. It is a per-cycle, time-domain measure by
|
||||
the **zero-crossing method** (`channel_compliance_points`):
|
||||
|
||||
- Split the channel's waveform at its zero crossings.
|
||||
- Each half-cycle contributes one point: **frequency** `= 1 / (2 · half-period)`
|
||||
(from the samples between the two crossings), **velocity** `= peak |amplitude|`
|
||||
in that half-cycle.
|
||||
|
||||
This yields ~90–110 points per channel, and — by construction — each channel's
|
||||
**highest** point equals that channel's PPV. Verified against Blastware: the
|
||||
cloud shape, density, and ceiling all match.
|
||||
|
||||
### Why not the FFT?
|
||||
|
||||
A broadband blast spreads its energy across many FFT bins, so no single bin
|
||||
reaches the time-domain peak — the FFT amplitudes come out ~10× below the
|
||||
compliance-chart velocities. The compliance chart is a *per-cycle peak* view;
|
||||
the **FFT** is a separate analysis (Blastware's *FFT Report*), reproduced by
|
||||
[`waveform_fft.py`](../waveform_fft.py) and used for the dominant-frequency
|
||||
readout and the #10 FFT view — not for this scatter.
|
||||
|
||||
---
|
||||
|
||||
## Implementation
|
||||
|
||||
- `sfm/compliance.py`
|
||||
- `limit_at(freq, curve)` — the limit PPV at a frequency (`curve` = `"Drywall"`
|
||||
or `"Plaster"`); curves are data in `_CURVES`, so more standards can be added.
|
||||
- `channel_compliance_points(samples, sps)` — the zero-crossing scatter.
|
||||
- `draw_compliance_chart(ax, channels, sps)` — matplotlib rendering (both
|
||||
limit lines + per-channel scatter, Blastware's tick scales and channel
|
||||
markers: Tran `+` red, Vert `×` green, Long `o` blue).
|
||||
- Tests: `tests/test_compliance.py`.
|
||||
|
||||
---
|
||||
|
||||
## Sources
|
||||
|
||||
- USBM **RI8507** (Siskind, Stagg, Kopp, Dowding, 1980), Appendix B / Figure B-1,
|
||||
p.73–74; Table 13, p.67. (`ref-stuff/usbm-ri8507-ground_vibration.pdf`.)
|
||||
- **30 CFR 816.67**, "Use of explosives: Control of adverse effects," Figure 1 —
|
||||
<https://www.ecfr.gov/current/title-30/chapter-VII/subchapter-K/part-816/section-816.67>
|
||||
@@ -1,6 +1,7 @@
|
||||
# Runbook — Recovering a wedged unit stuck in a call-home loop
|
||||
|
||||
**Original incident:** BE9558H at `166.246.130.1:9034`, recovered 2026-05-17.
|
||||
**Incidents:** BE9558H at `166.246.130.1:9034`, 2026-05-17 (Method B) ·
|
||||
BE12599 at `166.246.64.226:9034`, 2026-09-16 (Method A).
|
||||
|
||||
A field unit with a stuck-triggered geophone (or any hardware fault causing
|
||||
constant event triggering) will record events back-to-back, and if Auto Call
|
||||
@@ -14,6 +15,33 @@ This runbook describes how to break the loop and recover control.
|
||||
|
||||
---
|
||||
|
||||
## ⚠ Two cures for one disease — intercept first
|
||||
|
||||
Both incidents below are the **same failure**: a geophone offset crosses the
|
||||
trigger level, the unit records back-to-back, ACH set to "after event
|
||||
recorded" dials continuously, and the unit becomes unreachable because its
|
||||
modem is in client mode almost all of the time.
|
||||
|
||||
There are two ways to get a Stop Monitoring command into it.
|
||||
|
||||
| | **A — intercept the call** (preferred) | **B — catch it between calls** (original) |
|
||||
|---|---|---|
|
||||
| Idea | Be the server it dials. Point the modem's Destination at our own ACH server and answer it. | Clear the Destination so it stops dialing, then race a Stop into the gap. |
|
||||
| Needs inbound? | **No — the unit calls us** | Yes: working inbound TCP to the modem |
|
||||
| Determinism | Deterministic — it dials every ~75 s, we only have to be listening | A race. BE9558H took ~7 h of attempts before one landed. |
|
||||
| Tool | `bridges/ach_server.py --stop-monitoring` | `scripts/slow_drip.sh` |
|
||||
| Proven on | BE12599, 2026-09-16 | BE9558H, 2026-05-17 |
|
||||
|
||||
**Method A is the standard procedure now.** The unit won't answer us because
|
||||
it is on the phone — so stop dialing it and be the one it calls. It rings,
|
||||
we pick up, take its data, and tell it to stop calling here.
|
||||
|
||||
Method B is kept because it is proven, and because A needs a listener the
|
||||
modem can actually reach (public IP + forwarded port). When you have that,
|
||||
don't race it — intercept it.
|
||||
|
||||
---
|
||||
|
||||
## Symptoms
|
||||
|
||||
- Terra-View / SFM `/device/info` either hangs or fails on `count_events()`.
|
||||
@@ -31,9 +59,85 @@ If you see *all* of these, the unit is in this exact failure mode.
|
||||
|
||||
---
|
||||
|
||||
## Quick reference — how to recover
|
||||
## Method A (preferred) — intercept the call
|
||||
|
||||
You need **ACEmanager access** to the unit's modem.
|
||||
You need **ACEmanager access** and a host the modem can dial: public IP with
|
||||
the listener's port forwarded to it.
|
||||
|
||||
### A1 — start the listener BEFORE touching the modem
|
||||
|
||||
```bash
|
||||
cd /home/serversdown/seismo-relay
|
||||
tmux new -s rescue
|
||||
.venv/bin/python -u bridges/ach_server.py --port 12345 \
|
||||
-o bridges/captures/<unit>-diag --stop-monitoring -v
|
||||
```
|
||||
|
||||
⚠ **Listener first, always.** A Destination pointed at a dead port is the
|
||||
worst state available — the device still dials, the modem still flips to
|
||||
client mode, inbound stays blocked, and nothing gets delivered.
|
||||
|
||||
Do **not** add `--events-only` (it silently breaks dedup — see gotchas), and
|
||||
do **not** add `--disable-ach` yet (see A4).
|
||||
|
||||
### A2 — point the modem at it
|
||||
|
||||
ACEmanager → **Serial → Port Configuration**:
|
||||
|
||||
| Field | Set to |
|
||||
|---|---|
|
||||
| **Destination Address** | the listener's public IP |
|
||||
| **Destination Port** | the listener's port (e.g. `12345`) |
|
||||
|
||||
Apply. The modem auto-dials its Destination whenever serial data arrives
|
||||
while the serial port is closed — so the unit's own retry cycle now lands on
|
||||
you instead of nowhere.
|
||||
|
||||
### A3 — answer, and stop the bleeding
|
||||
|
||||
Within ~75 s you should see a call-in. `--stop-monitoring` fires SUB 0x97 at
|
||||
step 1.5 — after the handshake, **before** the event walk — so the recording
|
||||
halts at the earliest possible moment in the session. Confirm via
|
||||
`rescue.json` in the session directory:
|
||||
|
||||
```json
|
||||
{"peer": "166.246.64.226:60921", "stop_monitoring": "ok"}
|
||||
```
|
||||
|
||||
That is the bleeding stopped. Everything after this is cleanup.
|
||||
|
||||
### A4 — drain the backlog, THEN disable ACH
|
||||
|
||||
⚠ **Order matters, and it is counter-intuitive.** Stopping monitoring also
|
||||
removes your call-in trigger: ACH fires on "after event recorded", so with
|
||||
recording stopped the unit has no reason to dial again. The backlog sitting
|
||||
in its memory does **not** re-arm it.
|
||||
|
||||
So if the stored events are worth keeping — and on a fault unit they usually
|
||||
are, they're the evidence — drain them across however many call-ins it takes
|
||||
*before* you silence it. Only then add `--disable-ach` (or use
|
||||
`scripts/rescue_device.sh <host> <port> --no-erase`).
|
||||
|
||||
If the unit has gone quiet and you still need it, cycling the modem produces
|
||||
a call-in, and a unit with a scheduled daily call will dial at its configured
|
||||
time regardless.
|
||||
|
||||
### A5 — restore the Destination, and confirm you did
|
||||
|
||||
Put `Destination Address` back to `0.0.0.0` (or the office Instantel ACH
|
||||
server) once you are finished, and only stop the listener after that is done.
|
||||
|
||||
### A6 — do NOT re-enable ACH until the hardware fault is repaired
|
||||
|
||||
Otherwise the loop restarts the moment monitoring resumes and you run this
|
||||
runbook again.
|
||||
|
||||
---
|
||||
|
||||
## Method B (fallback) — catch it between calls
|
||||
|
||||
The original 2026-05 procedure. Use when you cannot stand up a listener the
|
||||
modem can reach. You need **ACEmanager access** to the unit's modem.
|
||||
|
||||
### Step 1: stop the modem's mode-flipping
|
||||
|
||||
@@ -253,3 +357,223 @@ service).
|
||||
|
||||
Total time from "i was wondering if its possible to" first attempt to
|
||||
recovery: ~7 hours of intermittent debugging across one evening.
|
||||
|
||||
---
|
||||
|
||||
# Second incident — BE12599, 2026-09-16/17
|
||||
|
||||
**Unit:** BE12599 at `166.246.64.226:9034`, RV50, job *I-80 North Fork Bridge
|
||||
— Abut 1 West* (Fay Company). Same job as BE9558H, which is a coincidence.
|
||||
|
||||
**Fault:** the connector fault documented in `docs/offset_investigation.md`
|
||||
§8e progressed until the Tran pedestal reached **0.400 in/s** — its trigger
|
||||
level. Constant triggering → constant recording → ACH "after event recorded"
|
||||
→ continuous dialing. Same disease as BE9558H.
|
||||
|
||||
**Same disease, inverted cure.** Method B's Step 1 *did* work — clearing the
|
||||
Destination stopped the dial-outs, confirmed in the ALEOS log. It was Step 2
|
||||
that didn't land, and rather than keep racing we turned the rescue around:
|
||||
gave the unit a different server to call, and answered it.
|
||||
|
||||
Total time ≈ 5 h, of which ~90 min went to two red herrings documented below.
|
||||
Much of the rest was rediscovering the May procedure, which is why the
|
||||
"two cures" table now sits at the top of this file.
|
||||
|
||||
---
|
||||
|
||||
## Turn on ALEOS_SERIAL debug FIRST
|
||||
|
||||
This is the single highest-value diagnostic and it should be step zero on any
|
||||
future incident. ACEmanager → **Admin → Log → ALEOS_SERIAL log level →
|
||||
DEBUG**, then view the serial log.
|
||||
|
||||
It is the only thing that tells you what the *device* is actually saying.
|
||||
Everything before we did this was guesswork.
|
||||
|
||||
## What the log showed — the unit is on the phone
|
||||
|
||||
Every ~75 seconds, verbatim:
|
||||
|
||||
```
|
||||
ALEOS_SERIAL_HIF: 29 byte(s) in buffer: 'ATQ1^MATE0^MATS0=2^M^MRADIO RING^M'
|
||||
ALEOS_SERIAL_HMC: TCP recvhost fd 65535 len 29 state TCPMode::kClosed
|
||||
ALEOS_SERIAL_HMC: tcpmode trying to send to invalid socket
|
||||
ALEOS_SERIAL_HMC: Connect to IP: 0.0.0.0 Port 0
|
||||
ALEOS_SERIAL_HMC: Initialize Auto answer on port 9034
|
||||
ALEOS_SERIAL_HMC: Cannot connect to 0.0.0.0
|
||||
```
|
||||
|
||||
Read that carefully:
|
||||
|
||||
- `ATQ1` (quiet) / `ATE0` (echo off) / `ATS0=2` (auto-answer after 2 rings).
|
||||
**There is no `ATD`.** The device is not dialing — it is trying to
|
||||
*configure* its modem.
|
||||
- The modem's serial port is in TCP data mode, so it never interprets these
|
||||
as AT commands. It treats them as payload and tries to ship them to a TCP
|
||||
socket that does not exist.
|
||||
- The device therefore never receives `OK`, never progresses, and **retries
|
||||
the identical 29 bytes forever**.
|
||||
|
||||
**While it is in this state it is busy placing a call, not listening for
|
||||
us.** This is almost certainly what BE9558H was doing too — we simply never
|
||||
turned on ALEOS_SERIAL debug in May to look. It is not a different disease;
|
||||
it is the same one, seen properly for the first time.
|
||||
|
||||
It is also the argument for Method A in one picture: the unit is mid-dial
|
||||
every ~75 s, and our inbound Stop has to thread the gaps between those
|
||||
attempts. Give it somewhere to dial and the problem inverts into a
|
||||
deterministic one.
|
||||
|
||||
### Why `slow_drip` lied
|
||||
|
||||
`slow_drip` returned the *success* signature except for the one field that
|
||||
mattered:
|
||||
|
||||
```json
|
||||
{"duration_s":120.0,"drips_sent":38,"bytes_sent":920,
|
||||
"bytes_received":0,"send_error":null}
|
||||
```
|
||||
|
||||
Full duration, no broken pipe — but zero bytes back. Cause is in the log
|
||||
above: each 75 s cycle re-runs `Initialize Auto answer on port 9034`, which
|
||||
orphans the held session (`data in for unknown reason 3 removing from
|
||||
select`, `OnMsg recv error: 107 - Transport endpoint is not connected`). Our
|
||||
local TCP stayed open so `sendall` never raised — but the modem stopped
|
||||
bridging after the first re-init, so every drip after that went into a socket
|
||||
nobody was reading.
|
||||
|
||||
⚠ **`send_error: null` + full duration is NOT success. Only
|
||||
`bytes_received > 0` is success.**
|
||||
|
||||
⚠ **In fairness to slow_drip: it got exactly one attempt here**, run ~90 s
|
||||
after a modem reboot, with a dead session visible in the log at 20:19:17 in
|
||||
that same window. BE9558H took hours of attempts before one landed. Method B
|
||||
was not ruled out on BE12599 so much as abandoned in favour of something that
|
||||
doesn't need luck.
|
||||
|
||||
---
|
||||
|
||||
## ⚠ Two red herrings that cost ~90 minutes
|
||||
|
||||
### 1. The trusted-IP whitelist (this was the real reason inbound never worked)
|
||||
|
||||
The RV50s run with **Security → Trusted IPs (Friends List) enabled**. A
|
||||
source IP that is not on the list is dropped **silently** — inbound presents
|
||||
as `Connection error: timed out`, never a refusal.
|
||||
|
||||
Brian's dev-box public IP is **dynamic** and had changed, so `tmi-dev` was no
|
||||
longer whitelisted. Every inbound attempt failed identically across four
|
||||
different modem and device states, which looked exactly like the BE9558H
|
||||
mode-flipping symptom and sent us chasing modem configuration for over an
|
||||
hour.
|
||||
|
||||
**Check this before diagnosing anything else.** Note that SFM in Docker
|
||||
egresses via the *host's public IP*, not its LAN IP.
|
||||
|
||||
### 2. A 502 from SFM does not mean TCP connected
|
||||
|
||||
`sfm/server.py` raises **502 for both** failure classes:
|
||||
|
||||
```python
|
||||
raise HTTPException(status_code=502, detail=f"Protocol error: {exc}")
|
||||
raise HTTPException(status_code=502, detail=f"Connection error: {exc}")
|
||||
```
|
||||
|
||||
We read an early 502 as "TCP connected, modem bridged, device mute" and built
|
||||
a whole theory on it. It was almost certainly a connect timeout.
|
||||
**Always read the `detail` string** — "connect failed" and "device didn't
|
||||
answer" are completely different problems and the status code will not
|
||||
separate them.
|
||||
|
||||
---
|
||||
|
||||
## What actually worked — invert the direction
|
||||
|
||||
The key observation is in the log above:
|
||||
|
||||
> `TCP recvhost ... state TCPMode::kClosed` → `Connect to IP: 0.0.0.0 Port 0`
|
||||
|
||||
**The modem auto-dials its Destination whenever serial data arrives while
|
||||
closed.** So instead of fighting for inbound, give it somewhere to dial:
|
||||
point `Destination Address` at our own `ach_server` and the device's own
|
||||
75-second attempts become **device-initiated sessions the modem bridges
|
||||
correctly**. No race, no contention, worst case a 75-second wait.
|
||||
|
||||
### Procedure
|
||||
|
||||
1. **Run the rescue server** on a host the modem can reach (public IP +
|
||||
forwarded port):
|
||||
|
||||
```bash
|
||||
cd /home/serversdown/seismo-relay
|
||||
.venv/bin/python -u bridges/ach_server.py --port 12345 \
|
||||
-o bridges/captures/<unit>-diag --stop-monitoring -v
|
||||
```
|
||||
|
||||
2. **Point the modem at it** — ACEmanager → Serial → Port Configuration →
|
||||
`Destination Address` = your public IP, `Destination Port` = 12345.
|
||||
|
||||
3. **Wait for the call-in.** `--stop-monitoring` fires SUB 0x97 at step 1.5,
|
||||
after the handshake and *before* the event walk. Confirm via
|
||||
`rescue.json` in the session directory:
|
||||
|
||||
```json
|
||||
{"peer": "166.246.64.226:60921", "stop_monitoring": "ok"}
|
||||
```
|
||||
|
||||
4. **Restore the modem's Destination** once you are done, then finish the
|
||||
device side (disable ACH, erase) through whichever channel works.
|
||||
|
||||
On BE12599 the first call-in landed at 20:58:11 and reported
|
||||
`stop_monitoring: ok`; a second at 20:58:20 confirmed it. `is_monitoring:
|
||||
false` was still true **6½ hours later** — the fix is durable.
|
||||
|
||||
---
|
||||
|
||||
## Hard-won gotchas (do not re-derive)
|
||||
|
||||
- **Never leave the Destination pointed at a host with nothing listening.**
|
||||
That is the worst state available: the device still dials, the modem still
|
||||
flips, inbound stays blocked, and nothing is delivered. An 8-minute gap
|
||||
with the listener down produced a spurious inbound timeout that cost
|
||||
another round of misdiagnosis.
|
||||
|
||||
- **Stopping monitoring removes your call-in channel.** ACH is "after event
|
||||
recorded"; no new events means no new dials. The backlog sitting in memory
|
||||
does *not* re-arm it. After a successful stop the unit goes quiet and you
|
||||
need the modem cycled (works — produced a call-in), the scheduled daily call
|
||||
(BE12599 calls at **05:00:14 device-local**, per §8e), or working inbound.
|
||||
**Plan the order before you fire the stop.**
|
||||
|
||||
- **`--events-only` silently breaks dedup.** It skips the device-info step,
|
||||
so the serial is never read; `ach_state.json` then keys on
|
||||
`peer:ephemeral_port`, which is unique per connection. Every session looks
|
||||
like a new unit, starts from key 0, and re-downloads the same event. Four
|
||||
sessions on BE12599 downloaded the identical event four times and made zero
|
||||
progress on the backlog. Events also file as `serial=UNKNOWN` with a
|
||||
`M000…` BW filename (serial_numeric 0) instead of `N599…`.
|
||||
**Do not use `--events-only` when you intend to download anything.**
|
||||
|
||||
- **`/device/events/index` reported `lifetime_count: 0`** on a unit with years
|
||||
of history. Suspected decode bug in the SUB 0x08 field offset — do not
|
||||
trust that number. The 88-byte payload is preserved in the `raw_hex` field
|
||||
if someone wants to chase it.
|
||||
|
||||
- **Memory used cross-checks the event keys exactly:**
|
||||
`last_key − buffer_start = memory_total − memory_free`. On BE12599:
|
||||
`0x011230ec − 0x01110000 = 78,060` and `983,028 − 904,968 = 78,060`.
|
||||
Useful sanity check that you are reading the keys right.
|
||||
|
||||
---
|
||||
|
||||
## Final state (2026-09-17 ~01:30 local)
|
||||
|
||||
- `is_monitoring: false`, held 6½ hours
|
||||
- Battery 6.76 V
|
||||
- Memory 78,060 / 983,028 bytes used (8%)
|
||||
- `first_key 01121728`, `last_key 011230ec` — ~6.6 KB of addressable event
|
||||
chain, roughly 3 events
|
||||
- ACH still **enabled** — to be disabled after the backlog is preserved
|
||||
- Modem Destination still pointed at tmi-dev — to be restored
|
||||
- ⚠ **Do not re-enable ACH until the connector is serviced.** Tran is still
|
||||
sitting at 0.400 and the loop restarts the moment monitoring resumes.
|
||||
|
||||
@@ -0,0 +1,150 @@
|
||||
# SFM — where it actually stands as a tool
|
||||
|
||||
**Status as of 2026-09-20 (v0.31.0).** This is the honest assessment, not the
|
||||
roadmap — `README.md § Roadmap` covers where it is *going*. Expect this file to
|
||||
go stale; re-date it when you revise it.
|
||||
|
||||
---
|
||||
|
||||
## The framing
|
||||
|
||||
SFM is **three different things wearing one name**, at three very different
|
||||
levels of maturity:
|
||||
|
||||
| | what it is | maturity |
|
||||
|---|---|---|
|
||||
| **The codec library** | `minimateplus/`, `micromate/` — bytes in, `Event` out | **Production.** Verified per-sample at scale. |
|
||||
| **SDM — the data side** | the DB, waveform store, `/db/*`, ingest | **Production.** Terra-View depends on it daily. |
|
||||
| **SFM — the device side** | `/device/*`, live connections to units | **Emergency-grade.** Works, but manual, unauthenticated, and thinly tested. |
|
||||
| **The lab** | `seismo_lab.py`, `scratch/`, the Inspector | **Research artifacts.** Useful, not products. |
|
||||
|
||||
Brian's own description — *"right now it's an emergency tool and a research
|
||||
project"* — is accurate, and it applies specifically to the **device side**.
|
||||
The data side is not an emergency tool; it has been carrying production for
|
||||
months.
|
||||
|
||||
Most confusion about "is SFM reliable?" comes from answering for the wrong
|
||||
tier.
|
||||
|
||||
---
|
||||
|
||||
## 1. What you can rely on
|
||||
|
||||
### Production-grade — trust it
|
||||
|
||||
- **Series-3 decode.** 14,338 / 14,338 files decode per-sample exact against
|
||||
preserved Blastware ASCII exports, 45 units, files back to 2018.
|
||||
- **Series-4 (Thor) decode.** 1,057,536 / 1,057,536 geo samples exact against
|
||||
Thor's own CSV exports; production IDFW 575/575 with zero truncations.
|
||||
- **Histogram decode.** 1,211 / 1,211 production histograms exact, including
|
||||
842,442 per-interval frequency comparisons with zero mismatches.
|
||||
- **The ingest path.** `/db/import/blastware_file` and `/db/import/idf_file`
|
||||
fed by the watchers — this is how prod actually gets its data, and it has
|
||||
been running unattended for months.
|
||||
- **`/db/*` read API.** Always-on, consumed by Terra-View for every fleet
|
||||
listing, event detail and report.
|
||||
- **The waveform store** — `.h5` + `.sfm.json` sidecars + retained raw
|
||||
binaries, with operator review state preserved across regeneration.
|
||||
- **`bridges/ach_server.py`** — speaks the full BW protocol to calling units.
|
||||
Proven in the field, including as a rescue tool (see the runbook).
|
||||
|
||||
### Emergency-grade — works, but you are the error handling
|
||||
|
||||
- **`/device/*` live endpoints.** They do what they say. But they are
|
||||
synchronous, unauthenticated, and a single cellular download can exceed the
|
||||
60 s timeouts that sit in front of them.
|
||||
- **The rescue ladder** (`rescue`, `stop_monitoring_*`, `events/erase`).
|
||||
Each has worked in a real incident — but each has been used a handful of
|
||||
times, by one person, with the runbook open.
|
||||
- **The standalone webapp.** Perfectly usable, and as of v0.31.0 the cheap
|
||||
probes and rescue actions are reachable without curl. No auth of any kind.
|
||||
|
||||
### Research artifacts — useful, not products
|
||||
|
||||
- **`seismo_lab.py`** — 2,789 lines of Tkinter (Bridge / Analyzer / Query DB /
|
||||
Inspector). Desktop-only, single-user, no tests.
|
||||
- **`scratch/`** — the verification harnesses (`verify_against_ascii.py`,
|
||||
`verify_thor_against_csv.py`) and the offset detector (`offset_scan3.py`).
|
||||
These produced the numbers the production claims rest on, so they matter —
|
||||
but they are analysis scripts, not maintained code.
|
||||
- **`docs/offset_investigation.md`** — an open investigation, not a feature.
|
||||
|
||||
---
|
||||
|
||||
## 2. What to use when
|
||||
|
||||
| you want to… | use | notes |
|
||||
|---|---|---|
|
||||
| Know if a unit is monitoring / its battery / memory | `GET /device/monitor/status?force=true` | ~2 s |
|
||||
| Know whether ACH is on | `GET /device/call_home` | ~2 s. **Not** `/device/events`. |
|
||||
| See how full a unit's buffer is | `GET /device/events/storage_range` | ~2 s, no chain walk |
|
||||
| Stop a runaway unit | Diagnostics tab → Stop Monitoring | see the runbook first |
|
||||
| Reach a unit that will not answer | **point its modem at an `ach_server` and answer its call** | runbook Method A — do not race it |
|
||||
| List a unit's stored events | Events tab → Load events | **slow**, and broken past 64 KB (below) |
|
||||
| Get event data into the DB | the watcher → `/db/import/*` path | not the live walk |
|
||||
|
||||
The single most useful habit: **the cheap probes are cheap and the event walk
|
||||
is not.** Reaching for `/device/events` to answer a yes/no question about a
|
||||
unit is the mistake that motivated the v0.31.0 webapp changes.
|
||||
|
||||
---
|
||||
|
||||
## 3. Known issues
|
||||
|
||||
| issue | impact | status |
|
||||
|---|---|---|
|
||||
| **5A walk dies once a unit's buffer crosses 64 KB** | `/device/events` 500s; event body never downloads | Known, documented in `CLAUDE.md`. Needs a BW capture of a spanning event to fix properly. |
|
||||
| **No auth on SFM at all** | 21 `/device/*` endpoints, including destructive ones, open to anything that reaches the port | Design agreed (Terra-View as authenticated jump host); not built. |
|
||||
| **Swagger try-it-out is live on destructive endpoints** | `POST /device/events/erase` is one click away at `:8200/docs` | Partially mitigated: the webapp's erase now requires typing the serial. `/docs` itself is unguarded. |
|
||||
| **`SUB 0x08` lifetime counter reads 0** | `/device/events/index` returns a meaningless number | Suspected field-offset bug. Surfaced in the UI as "unreliable". |
|
||||
| **Long device operations are synchronous** | 60 s timeouts in `routers/sfm.py` and the reverse proxy; a full download exceeds both | Known design constraint. Must be POST-starts-job / GET-polls before any remote lab. |
|
||||
| **`backfill_sidecars.py --force` silently inserts DB rows** | store files with no DB row get one; the dry-run does not report the count | Known. Avoid `--force` — `TOOL_VERSION` gates regeneration anyway. |
|
||||
| **14 sensitive-range files show an exact 8× discrepancy** | 10.0 / 1.25 — a units problem, not a decode problem | Open, not blocking. |
|
||||
| **16 failing tests on `dev`** | 15 need gitignored fixture bundles; 1 is real (`sc["peak_values"]["transverse"]` returns `None` where `0.0` is expected) | The real one shipped in v0.31.0. |
|
||||
|
||||
---
|
||||
|
||||
## 4. What stands between this and a real tool
|
||||
|
||||
Roughly in dependency order — each unblocks the ones below it.
|
||||
|
||||
**1. Authentication.** Everything else is gated on this. SFM has none, and
|
||||
the modem IP whitelist gives zero protection because SFM *is* the whitelisted
|
||||
origin. The agreed design delegates rather than builds: Terra-View becomes the
|
||||
authenticated jump host (`/api/sfm/*` already inherits deny-by-default operator
|
||||
auth), and the `8200:8200` publish is dropped so Terra-View is the only door.
|
||||
|
||||
**2. Async long operations.** POST starts a job, GET polls. Retrofitting this
|
||||
after building a remote lab on top of synchronous endpoints would be far worse
|
||||
than designing for it now.
|
||||
|
||||
**3. Confirm-guards on the remaining destructive endpoints.** Auth answers
|
||||
*who*, not *did you mean it*. The webapp's erase is guarded; the other seven
|
||||
destructive POSTs and `/docs` are not.
|
||||
|
||||
**4. The 5A page-boundary fix.** Until this lands, live event download is
|
||||
unreliable on exactly the units most likely to need attention — the ones that
|
||||
have been recording heavily. Wants a Blastware capture of an event spanning a
|
||||
page boundary before the chunk-addressing half is trustworthy.
|
||||
|
||||
**5. A live Thor / Micromate client.** The device side is MiniMate-only.
|
||||
Series-4 units can only be read from forwarded files, so half the fleet has no
|
||||
live path at all.
|
||||
|
||||
**6. Test coverage that runs from a clean checkout.** 15 of 16 current
|
||||
failures are missing fixture bundles. A test suite that cannot go green on a
|
||||
fresh clone cannot gate anything.
|
||||
|
||||
**7. The SDM rename.** Cosmetic relative to the above, but the longer `sfm/`
|
||||
holds the data-side code the more the tiers blur. ~30–50 files here, ~10–15 in
|
||||
Terra-View, plus a Docker volume migration. Do it when the codebase is quiet.
|
||||
|
||||
---
|
||||
|
||||
## The short version
|
||||
|
||||
The **data side is a real tool already**. The **device side is a set of sharp
|
||||
instruments** that work in the hands of the person who wrote them, with the
|
||||
runbook open. The gap between those two states is mostly **auth, async, and
|
||||
guardrails** — not protocol work. The protocol is the part that is actually
|
||||
finished.
|
||||
@@ -0,0 +1,134 @@
|
||||
# Plan — "Rescue Listener": a first-class tool for the inverted rescue
|
||||
|
||||
**Status:** proposal, not started. Written 2026-09-17 ~01:40 local, straight
|
||||
off the BE12599 incident. Open questions at the bottom need Brian's answer
|
||||
before anything is built.
|
||||
|
||||
**Background:** `docs/runbooks/wedged_unit_recovery.md`, "Second incident —
|
||||
BE12599". The manual version of this worked; this plan is about making it a
|
||||
tool instead of a sequence of remembered steps at 1 AM.
|
||||
|
||||
---
|
||||
|
||||
## The problem, stated plainly
|
||||
|
||||
When a unit is wedged in the BE12599 mode — geophone offset above trigger,
|
||||
recording back-to-back, ACH dialing constantly, device stuck repeating an AT
|
||||
modem-init string and therefore **deaf to S3 over inbound** — the only channel
|
||||
that works is the one the *device* opens.
|
||||
|
||||
Recovering it currently means:
|
||||
|
||||
1. Remember that `bridges/ach_server.py` exists and takes the right flags
|
||||
2. Start it by hand on a box the modem can reach, with a public port forwarded
|
||||
3. Go into ACEmanager and repoint the modem's Destination
|
||||
4. Watch a terminal for a call-in
|
||||
5. Read `rescue.json` to find out whether it worked
|
||||
6. Go back into ACEmanager and repoint the modem to where it belongs
|
||||
7. **Not forget step 6**, because leaving the Destination pointed at a dead
|
||||
listener is worse than never having started
|
||||
|
||||
That is six manual steps and one landmine, executed under pressure while a
|
||||
unit floods the office server.
|
||||
|
||||
## What the tool should be
|
||||
|
||||
**A "rescue listener" an operator can start for one unit, which handles
|
||||
whatever that unit says when it calls in, and refuses to go away until the
|
||||
operator confirms the modem has been pointed back.**
|
||||
|
||||
Lifecycle:
|
||||
|
||||
1. **Start** — operator names the target unit and starts a rescue listener.
|
||||
The tool reports the exact address/port to enter in ACEmanager, plus the
|
||||
actions it will take.
|
||||
2. **Operator repoints the modem** to that address.
|
||||
3. **Wait** — listener sits there. Live status: "waiting for call-in",
|
||||
elapsed, last-seen.
|
||||
4. **Act** — on call-in, run the configured rescue actions automatically,
|
||||
in a safe order, each independently guarded. Report per-action outcome.
|
||||
5. **Hold** — the listener **stays up** and keeps reporting, because the
|
||||
modem is still pointed at it.
|
||||
6. **Confirm & stop** — the operator explicitly confirms the Destination has
|
||||
been restored (to `0.0.0.0`, or to the office Instantel ACH server).
|
||||
Only then does the listener shut down.
|
||||
|
||||
Step 6 is the whole point of making this a tool. It is the step that is
|
||||
easiest to skip and most expensive to skip.
|
||||
|
||||
## Default action set
|
||||
|
||||
Ordered deliberately — see "order matters" below.
|
||||
|
||||
| # | Action | Default | Why |
|
||||
|---|---|---|---|
|
||||
| 1 | **Stop monitoring** (SUB 0x97) | ✅ on | Halts recording; ends the trigger→record→dial loop at its source. Already implemented as `--stop-monitoring`. |
|
||||
| 2 | **Drain events** to a diagnostics store | ⚙ configurable | The backlog is usually evidence, not garbage — see the BE12599 offset investigation. Must NOT land in the prod SFM DB. |
|
||||
| 3 | **Disable ACH** (SUB 0x2C/0x7E/0x7F) | ❌ off by default | Stops the dialing — **and stops your only channel**. Opt-in, and ideally gated on step 1 having succeeded. |
|
||||
| 4 | **Erase events** | ❌ off by default | Destructive. Only after a verified drain. |
|
||||
|
||||
### Order matters — the lesson from BE12599
|
||||
|
||||
Stopping monitoring *removes the call-in trigger*. ACH fires on "after event
|
||||
recorded"; with recording stopped, the unit has no reason to dial again, even
|
||||
though the backlog is still sitting in its memory. So a naive
|
||||
"stop + disable + erase, all at once" rescue can silence the unit before
|
||||
you've collected anything, leaving you with no channel and a device full of
|
||||
evidence.
|
||||
|
||||
The tool should either sequence around this or warn loudly about it. My
|
||||
instinct is: **stop monitoring immediately** (it's the bleeding), then drain
|
||||
across however many call-ins it takes, and treat disable-ACH/erase as a
|
||||
separate, explicit "finish" action once the operator is satisfied.
|
||||
|
||||
## Where it should live — open question, with a proposal
|
||||
|
||||
The natural tier is **SFM** (device-side, per the three-tier model in
|
||||
CLAUDE.md). But the rescue listener must be reachable *from the cellular
|
||||
network*, which is a deployment constraint SFM's usual profile doesn't have.
|
||||
|
||||
**Proposal worth considering:** run it at the office, beside the real Instantel
|
||||
ACH server, on a **different port** (e.g. 12346 while Instantel holds 12345).
|
||||
Then the ACEmanager change is a **port change, not an IP change** — smaller,
|
||||
faster, less to get wrong, and trivially reversible. It also means the office
|
||||
public IP (already stable and known) is the destination, rather than whatever
|
||||
Brian's dynamic home IP happens to be that week.
|
||||
|
||||
The tmi-dev approach used on BE12599 worked, but required a router forward and
|
||||
ran into the dynamic-IP problem in the same session.
|
||||
|
||||
## Open questions
|
||||
|
||||
1. **Where does it run?** Office beside Instantel ACH (port swap), SFM on the
|
||||
NAS, or ad-hoc on tmi-dev? Affects everything else.
|
||||
2. **What drives it?** Terra-View admin page (fits "operator UI"), an SFM
|
||||
endpoint pair (`POST /device/rescue_listener/start` + `/stop` + `/status`),
|
||||
or a CLI wrapper? A long-lived listener doesn't fit the request/response
|
||||
endpoint shape well — probably needs a background task with a status poll.
|
||||
3. **How does it identify the unit?** It can't know the serial until the
|
||||
device calls in and the handshake reads it. Allowlist by modem IP? Accept
|
||||
anything and report what showed up?
|
||||
4. **Where do drained events go?** A per-incident diagnostics store
|
||||
(`bridges/captures/<unit>-diag`) seems right — explicitly *not* the prod
|
||||
SFM DB. Does that store need to be a first-class thing with its own
|
||||
retention, or is a directory fine?
|
||||
5. **How is "confirm the modem is repointed" verified?** Operator attestation
|
||||
(a button), or can we actually probe it? If the listener stops seeing
|
||||
call-ins that's weak evidence; if inbound to the unit starts working that's
|
||||
stronger.
|
||||
6. **Multi-unit?** One listener per incident, or one listener that handles any
|
||||
unit that dials in? Probably the former for safety.
|
||||
7. **Timeout / abandonment policy.** If nobody ever confirms, does it run
|
||||
forever? Alert after N hours?
|
||||
|
||||
## What already exists
|
||||
|
||||
- `bridges/ach_server.py` — the listener itself, with `--stop-monitoring`,
|
||||
`--disable-ach`, `--rescue` (added on `feat/ach-rescue-on-connect`, commit
|
||||
`9f1050b`), `--clear-after-download`, `--max-events`, `--allow-ip`.
|
||||
- Per-session `rescue.json` recording per-action outcomes.
|
||||
- Isolated per-output-dir SQLite + waveform store, so a diagnostics capture is
|
||||
already separate from prod by construction.
|
||||
|
||||
So the gap is not protocol work — it's lifecycle, operator surface, and the
|
||||
confirmation gate. Most of the risk is in questions 1 and 2.
|
||||
+225
-44
@@ -47,19 +47,24 @@ from dataclasses import dataclass
|
||||
from pathlib import Path
|
||||
from typing import Optional, Union
|
||||
|
||||
# Thor IDFW bodies are pinned to the SUPERSEDED tag-dispatch decoder.
|
||||
# Thor IDFW bodies use the series-3 record-chain decoder.
|
||||
#
|
||||
# _find_waveform_body_offset() trial-decodes every candidate offset and keeps
|
||||
# whichever yields the most samples. The series-3 record-chain decoder
|
||||
# correctly returns None where the legacy walker returned garbage, which
|
||||
# changes that heuristic's winner on 33 of 577 files. The net effect measured
|
||||
# 2026-08-25 was positive (all-channels-equal 8/577 -> 506/577, mean abs PPV
|
||||
# error 0.228 -> 0.173 in/s) but Thor has no ASCII ground truth in the corpus
|
||||
# and its geo scaling is separately suspect, so the switch is deferred until
|
||||
# the body-offset search is reworked to use the record chain directly.
|
||||
from minimateplus.waveform_codec import (
|
||||
decode_waveform_legacy as decode_waveform_v2,
|
||||
)
|
||||
# This was previously pinned to the SUPERSEDED tag-dispatch walker
|
||||
# (`decode_waveform_legacy`) on the stated grounds that "Thor has no ASCII
|
||||
# ground truth in the corpus and its geo scaling is separately suspect".
|
||||
# Both premises were false: Thor writes a per-sample CSV export next to every
|
||||
# binary (see scratch/verify_thor_against_csv.py), and the scaling is now
|
||||
# resolved (see _GEO_LSB_IPS). Measured against that ground truth on
|
||||
# 2026-09-10, the record chain beats the legacy walker outright:
|
||||
#
|
||||
# channel truncation 55/153 files -> 3/153
|
||||
# files exact 98/153 -> 150/153
|
||||
# per-sample exact 99.781% -> 99.854%
|
||||
#
|
||||
# The legacy walker stops at the first unrecognised tag and returns whatever
|
||||
# channels it had, so its failure mode is silent short channels rather than an
|
||||
# error. Do not re-pin it.
|
||||
from minimateplus.waveform_codec import _MODES, decode_waveform_v2, is_record
|
||||
|
||||
from .models import IdfEvent, IdfPeaks, IdfReport
|
||||
|
||||
@@ -89,23 +94,70 @@ _BODY_MAGIC = b"\x00\x02\x00"
|
||||
# fixed-header region where the same magic legitimately appears inside
|
||||
# channel-test records and the compliance block (offsets 0x015d, 0x091c,
|
||||
# 0x0ae2, 0x0d30 in observed events).
|
||||
_BODY_SCAN_FLOOR = 0x0E00
|
||||
# Lowered from 0x0E00 to 0x0C00 (2026-09-10). Three-channel events -- mic
|
||||
# disabled -- have a shorter fixed header and put their record chain head at
|
||||
# 0x0dba, below the old floor. The head was therefore invisible to the scan,
|
||||
# which fell through to the *Vert* segment-0 record and decoded a body shifted
|
||||
# one position around the channel rotation. 46 of 139 files in the
|
||||
# 9-10-26-csv-req corpus were affected; all 46 became per-sample exact once
|
||||
# the head was reachable. The floor still skips the fixed-header region,
|
||||
# where `is_record()` can match channel-test records (0x015d, 0x091c, 0x0ae2).
|
||||
_BODY_SCAN_FLOOR = 0x0C00
|
||||
|
||||
# Geophone count → in/s, derived from sidecar ground truth: the smallest
|
||||
# non-zero sample in 1,014-file corpus is 0.0003 in/s.
|
||||
_GEO_LSB_IPS = 0.0003
|
||||
# Cap on trial decodes per file. Chain-head detection normally yields one
|
||||
# or two candidates; the cap only bounds the worst case on a corrupt file.
|
||||
_MAX_BODY_CANDIDATES = 16
|
||||
|
||||
# Geophone count → in/s.
|
||||
#
|
||||
# The old value 0.0003 was read off the smallest non-zero sample in the
|
||||
# sidecar corpus, but that sample is Thor's *4-decimal display rounding* of
|
||||
# the true LSB, not the LSB itself. It read every series-4 geophone sample
|
||||
# 3.3% low. The quantisation ladder gives it away: counts 1..6 export as
|
||||
# 0.0003, 0.0006, 0.0009, 0.0012, 0.0016, 0.0019 — an LSB of exactly 0.0003
|
||||
# would end 0.0015, 0.0018.
|
||||
#
|
||||
# The value below maximises exact 4-dp agreement over 1,046,016 paired
|
||||
# samples (454 channel-events, 2 units) at 99.854%, versus 50.7% for 0.0003.
|
||||
# It is a global constant, not a per-unit calibration: all 8 UM units in the
|
||||
# production store independently agree to within ±0.07% on their
|
||||
# device-reported PPV. 1/LSB = 3222.6 counts per in/s.
|
||||
#
|
||||
# The value is pinned, not guessed. Each exported sample constrains the LSB
|
||||
# to the window that rounds to the printed 4-dp figure; intersecting 991,415
|
||||
# such constraints (clean channel-events only) gives
|
||||
#
|
||||
# LSB in [0.000310307933, 0.000310308057] width 1.2e-10
|
||||
#
|
||||
# 0.000310308 sits at the centre of that window. Equivalent full scale is
|
||||
# 10.0 in/s / 0.000310308 = 32226.05 counts.
|
||||
#
|
||||
# Corroboration from the device: an IDFH interval that never recorded keeps
|
||||
# its min/max accumulator at its ±full-scale seed, and that seed is
|
||||
# (min=+32226, max=-32226) — the same magnitude, independently. Note the
|
||||
# tempting closed form 10.0/32226 is very slightly WRONG: it lands 4.5e-10
|
||||
# above the feasible window and loses 78 boundary samples to the literal
|
||||
# value while never winning one. Series-3 uses 32000 counts for the same
|
||||
# 10.0 in/s, so the two generations do NOT share a scale.
|
||||
#
|
||||
# Ground truth + harness: scratch/verify_thor_against_csv.py
|
||||
_GEO_LSB_IPS = 0.000310308
|
||||
|
||||
# Microphone count → psi, derived from sidecar regression on 50 sample
|
||||
# pairs from UM11719_20231219162723.IDFW (mic-heavy event).
|
||||
_MIC_LSB_PSI = 2.14e-6
|
||||
|
||||
# IDFH histogram constants.
|
||||
_IDFH_INTERVAL_SIZE = 72 # bytes per per-interval record
|
||||
# Bytes per interval record = 16 per channel + an 8-byte tail, so a
|
||||
# 4-channel unit uses 72 and a mic-disabled 3-channel unit uses 56. It is
|
||||
# NOT a constant: derive it per segment from the interval counter (see
|
||||
# decode_idfh_body). This value survives only as the 4-channel default.
|
||||
_IDFH_INTERVAL_SIZE = 72 # bytes per per-interval record (4 channels)
|
||||
_IDFH_CHANNEL_BLOCK = 16 # bytes per channel inside an interval record
|
||||
_IDFH_INTERVAL_TAIL = 8 # bytes after the per-channel blocks
|
||||
_IDFH_SEGMENT_HEADER = 10 # bytes: [len_be 2B][0a 00 00 00 4B][00 NN 2B][05 3f 2B]
|
||||
_IDFH_SEGMENT_TAIL = 2 # bytes after the interval data block, before next marker
|
||||
_IDFH_HALFP_FREQ_NUM = 512.0 # freq_hz = NUM / halfp; halfp ≤ 5 means ">100 Hz" sentinel
|
||||
_IDFH_GEO_FULL_SCALE = 10.0 # in/s — Normal range
|
||||
_IDFH_INT16_FS = 32768.0
|
||||
_IDFH_CHANNELS = ("Tran", "Vert", "Long", "MicL")
|
||||
|
||||
|
||||
@@ -223,26 +275,67 @@ def _find_waveform_body_offset(buf: bytes) -> Optional[int]:
|
||||
"""
|
||||
if len(buf) < _BODY_SCAN_FLOOR + 8:
|
||||
return None
|
||||
best: Optional[tuple[int, int]] = None # (total_samples, offset)
|
||||
i = _BODY_SCAN_FLOOR
|
||||
while True:
|
||||
j = buf.find(_BODY_MAGIC, i)
|
||||
if j < 0:
|
||||
break
|
||||
i = j + 1
|
||||
|
||||
# 1. Locate every plausible per-channel record header. A header carries
|
||||
# [len 2B][channel_id][00][00] at +2..+6, so anchor the search on the
|
||||
# three-byte ``<cid> 00 00`` signature and validate with is_record().
|
||||
# Scanning candidate *preambles* instead is not viable: MODE_RAW16 is
|
||||
# ``00 00``, so every run of three zero bytes would look like a body
|
||||
# start and each would cost a full trial decode (~0.5 s/file measured).
|
||||
floor = max(0, _BODY_SCAN_FLOOR - 7)
|
||||
starts: list = []
|
||||
for cid in (0x46, 0x47, 0x48, 0x49):
|
||||
sig = bytes((cid, 0x00, 0x00))
|
||||
i = floor
|
||||
while True:
|
||||
j = buf.find(sig, i)
|
||||
if j < 0:
|
||||
break
|
||||
i = j + 1
|
||||
q = j - 4
|
||||
if q >= floor and is_record(buf, q):
|
||||
starts.append(q)
|
||||
if not starts:
|
||||
return None
|
||||
starts.sort()
|
||||
|
||||
# 2. A body begins at the head of a record chain -- a record that no other
|
||||
# record's length field points at. The head's own payload is the
|
||||
# implicit segment-0 Tran record, and the body offset is head + 7 (past
|
||||
# [len 2B][cid][00][00][seg]) so that body[1:3] lands on the mode.
|
||||
ends = {q + 2 + int.from_bytes(buf[q + 2 : q + 4], "big") for q in starts}
|
||||
heads = [q for q in starts if q not in ends] or starts[:1]
|
||||
|
||||
# 3. Trial-decode each head and keep the best. Prefer a candidate where
|
||||
# all four channels come out the same length: scoring on raw sample
|
||||
# count alone picks false positives sitting *inside* a record header,
|
||||
# which decode a plausible-looking but rotation-shifted body that
|
||||
# silently drops each channel's segment 0.
|
||||
best = None
|
||||
best_off = None
|
||||
for head in heads[:_MAX_BODY_CANDIDATES]:
|
||||
j = head + 7
|
||||
if j + 3 > len(buf) or (buf[j + 1], buf[j + 2]) not in _MODES:
|
||||
continue
|
||||
try:
|
||||
decoded = decode_waveform_v2(buf[j:])
|
||||
except Exception:
|
||||
continue
|
||||
if not decoded:
|
||||
continue
|
||||
lengths = [len(v) for v in decoded.values() if v]
|
||||
total = sum(len(v) for v in decoded.values())
|
||||
# A "real" body has more than just the 2-sample preamble.
|
||||
if total <= 2:
|
||||
continue
|
||||
if best is None or total > best[0]:
|
||||
best = (total, j)
|
||||
return best[1] if best else None
|
||||
# >= 3 rather than == 4: a mic-disabled event has only the three geo
|
||||
# channels, and demanding four made `equal` permanently False for
|
||||
# them, leaving the pick to raw sample count alone.
|
||||
equal = len(lengths) >= 3 and len(set(lengths)) == 1
|
||||
score = (equal, total)
|
||||
if best is None or score > best:
|
||||
best, best_off = score, j
|
||||
return best_off
|
||||
|
||||
|
||||
def _decode_waveform_samples(buf: bytes) -> Optional[dict]:
|
||||
@@ -299,6 +392,12 @@ class IdfhInterval:
|
||||
micl_min: int
|
||||
micl_max: int
|
||||
micl_halfp: int
|
||||
# 4 on a normal unit; 3 when the microphone is disabled, in which case the
|
||||
# micl_* fields are absent from the record and read as zero.
|
||||
n_channels: int = 4
|
||||
|
||||
def has_channel(self, channel: str) -> bool:
|
||||
return channel != "MicL" or self.n_channels >= 4
|
||||
|
||||
def peak_count(self, channel: str) -> int:
|
||||
mn = getattr(self, f"{channel.lower()}_min")
|
||||
@@ -307,7 +406,11 @@ class IdfhInterval:
|
||||
|
||||
def peak_ips(self, channel: str) -> float:
|
||||
"""Convert peak count to in/s (geo channels only)."""
|
||||
return self.peak_count(channel) / _IDFH_INT16_FS * _IDFH_GEO_FULL_SCALE
|
||||
# Same geo LSB as the waveform path — verified independently against
|
||||
# the IDFH exports: as peak magnitude rises (and 4-dp quantisation
|
||||
# noise falls) the implied LSB converges on 0.0003103, matching
|
||||
# _GEO_LSB_IPS. The old 10.0/32768 read histogram peaks 1.7% low.
|
||||
return self.peak_count(channel) * _GEO_LSB_IPS
|
||||
|
||||
def freq_hz(self, channel: str) -> Optional[float]:
|
||||
halfp = getattr(self, f"{channel.lower()}_halfp")
|
||||
@@ -316,11 +419,46 @@ class IdfhInterval:
|
||||
return _IDFH_HALFP_FREQ_NUM / halfp
|
||||
|
||||
|
||||
def _decode_idfh_interval(buf72: bytes, offset: int) -> IdfhInterval:
|
||||
"""Decode one 72-byte interval record into per-channel min/max/halfp."""
|
||||
def _is_unwritten_interval(interval: "IdfhInterval") -> bool:
|
||||
"""True for an interval slot the device reserved but never wrote.
|
||||
|
||||
Thor seeds each interval's per-channel accumulators at ``min = +full
|
||||
scale`` and ``max = -full scale`` and then narrows them as samples
|
||||
arrive. A slot that never recorded keeps that seed, so ``min > max`` —
|
||||
impossible for real data. Such a record decodes to a full-scale
|
||||
10.0 in/s peak on every channel and, being a max-over-intervals, poisons
|
||||
the whole file's PPV.
|
||||
|
||||
Rare but real: exactly 1 of 497,611 corpus intervals, and it inflated
|
||||
that file's Long PPV from 0.0081 to 10.0 in/s. The inversion is always
|
||||
all-or-nothing across channels (0 partial cases in the corpus), so
|
||||
requiring every channel to be inverted keeps this from ever firing on
|
||||
genuine data.
|
||||
"""
|
||||
pairs = [
|
||||
(interval.tran_min, interval.tran_max),
|
||||
(interval.vert_min, interval.vert_max),
|
||||
(interval.long_min, interval.long_max),
|
||||
]
|
||||
if interval.has_channel("MicL"):
|
||||
pairs.append((interval.micl_min, interval.micl_max))
|
||||
return all(mn > mx for mn, mx in pairs)
|
||||
|
||||
|
||||
def _decode_idfh_interval(buf72: bytes, offset: int,
|
||||
n_channels: int = 4) -> IdfhInterval:
|
||||
"""Decode one interval record into per-channel min/max/halfp.
|
||||
|
||||
The record is ``n_channels`` × 16-byte blocks plus an 8-byte tail, so it
|
||||
is 72 bytes on a normal unit and 56 when the microphone is disabled.
|
||||
Missing channels read as zero.
|
||||
"""
|
||||
import struct
|
||||
fields = []
|
||||
for i in range(4):
|
||||
if i >= n_channels:
|
||||
fields.extend([0, 0, 0])
|
||||
continue
|
||||
block = buf72[i * 16 : (i + 1) * 16]
|
||||
mn = struct.unpack_from(">h", block, 0)[0]
|
||||
mx = struct.unpack_from(">h", block, 2)[0]
|
||||
@@ -336,6 +474,7 @@ def _decode_idfh_interval(buf72: bytes, offset: int) -> IdfhInterval:
|
||||
vert_min=fields[3], vert_max=fields[4], vert_halfp=fields[5],
|
||||
long_min=fields[6], long_max=fields[7], long_halfp=fields[8],
|
||||
micl_min=fields[9], micl_max=fields[10], micl_halfp=fields[11],
|
||||
n_channels=n_channels,
|
||||
)
|
||||
|
||||
|
||||
@@ -343,36 +482,73 @@ def decode_idfh_body(buf: bytes) -> list:
|
||||
"""Walk an IDFH file and decode every interval record.
|
||||
|
||||
The body has one or more segments; each segment header is 12 bytes:
|
||||
``[length_be 2B][0a 00 00 00][00 NN_counter][05 3f]`` where ``length``
|
||||
``[length_be 2B][0a 00 00 00][counter_be 2B][05 3f]`` where ``length``
|
||||
is bytes from the magic through the end of the interval block
|
||||
(= 10 + 72 × n_intervals). Segments are separated by a 2-byte tail
|
||||
+ next-segment 2-byte prefix (the bytes before the next length field).
|
||||
Confirmed against the 859-file corpus (181,071 intervals decoded; 1
|
||||
failure is the sig-B BE9439 file).
|
||||
|
||||
``counter`` is a **uint16 BE cumulative interval index** — the 0-based
|
||||
index of the LAST interval in this segment. Segments carry 10
|
||||
intervals each, so it runs 9, 19, 29, ... across the file.
|
||||
|
||||
⚠ This validator used to require ``buf[j + 4] == 0x00``, i.e. that the
|
||||
counter's high byte was zero. That silently capped every histogram at
|
||||
**250 intervals**: the moment the cumulative counter passed 255 the high
|
||||
byte went non-zero and every later segment was rejected, so any
|
||||
monitoring run longer than ~4 hours lost its tail — frequently the part
|
||||
holding the event peak, which is why those files' PPV read low. 540 of
|
||||
858 corpus files were affected. Do not reinstate that check.
|
||||
"""
|
||||
intervals: list = []
|
||||
i = 0
|
||||
prev_counter = -1 # so the first segment's n = counter + 1
|
||||
while True:
|
||||
j = buf.find(b"\x0a\x00\x00\x00", i)
|
||||
if j < 0 or j < 2:
|
||||
break
|
||||
# Validate: [length_be][0a 00 00 00][00 NN][05 3f]
|
||||
if buf[j + 4] != 0x00 or buf[j + 6 : j + 8] != b"\x05\x3f":
|
||||
# Validate: [length_be][0a 00 00 00][counter_be][05 3f]. The counter
|
||||
# is deliberately NOT constrained — see the note above.
|
||||
if buf[j + 6 : j + 8] != b"\x05\x3f":
|
||||
i = j + 1
|
||||
continue
|
||||
length = int.from_bytes(buf[j - 2 : j], "big")
|
||||
n = (length - _IDFH_SEGMENT_HEADER) // _IDFH_INTERVAL_SIZE
|
||||
counter = int.from_bytes(buf[j + 4 : j + 6], "big")
|
||||
header_start = j - 2
|
||||
if length < _IDFH_SEGMENT_HEADER or header_start + length > len(buf):
|
||||
# Truncated / bogus length — not a real segment header.
|
||||
i = j + 1
|
||||
continue
|
||||
# The counter is the cumulative index of this segment's LAST interval,
|
||||
# so the interval count is its delta from the previous segment. That
|
||||
# gives the record stride, which is NOT fixed: 16 bytes per channel
|
||||
# plus an 8-byte tail, so 72 for a 4-channel unit and 56 for a
|
||||
# mic-disabled 3-channel one. Assuming 72 unconditionally made every
|
||||
# 3-channel histogram read 7 intervals per 10-interval segment,
|
||||
# walking off alignment into garbage that decoded as ~10 in/s peaks.
|
||||
n = counter - prev_counter
|
||||
if n <= 0:
|
||||
i = j + 1
|
||||
continue
|
||||
header_start = j - 2
|
||||
stride = (length - _IDFH_SEGMENT_HEADER) // n
|
||||
n_channels, remainder = divmod(stride - _IDFH_INTERVAL_TAIL,
|
||||
_IDFH_CHANNEL_BLOCK)
|
||||
if remainder or not (1 <= n_channels <= 4):
|
||||
i = j + 1
|
||||
continue
|
||||
interval_start = header_start + _IDFH_SEGMENT_HEADER
|
||||
for k in range(n):
|
||||
off = interval_start + k * _IDFH_INTERVAL_SIZE
|
||||
if off + _IDFH_INTERVAL_SIZE > len(buf):
|
||||
off = interval_start + k * stride
|
||||
if off + stride > len(buf):
|
||||
break
|
||||
chunk = buf[off : off + _IDFH_INTERVAL_SIZE]
|
||||
intervals.append(_decode_idfh_interval(chunk, off))
|
||||
chunk = buf[off : off + stride]
|
||||
interval = _decode_idfh_interval(chunk, off, n_channels)
|
||||
if _is_unwritten_interval(interval):
|
||||
# Reserved-but-never-recorded slot: the min/max accumulators
|
||||
# still hold their ±full-scale seed. Counting it would
|
||||
# fabricate a 10.0 in/s peak on every channel.
|
||||
continue
|
||||
intervals.append(interval)
|
||||
prev_counter = counter
|
||||
# Advance past this segment + the 2-byte tail.
|
||||
i = header_start + length + _IDFH_SEGMENT_TAIL
|
||||
return intervals
|
||||
@@ -452,7 +628,12 @@ def read_idf_file(
|
||||
peak_long = max((iv.peak_ips("Long") for iv in intervals), default=0.0)
|
||||
# Mic peak in psi — Thor stores per-interval mic ADC counts in the
|
||||
# binary; convert the max count to psi via the per-count factor.
|
||||
mic_peak_count = max((iv.peak_count("MicL") for iv in intervals), default=0)
|
||||
# Skip on a mic-disabled (3-channel) unit: those records carry no mic
|
||||
# block at all, so peak_count("MicL") would report a synthetic zero.
|
||||
mic_peak_count = max(
|
||||
(iv.peak_count("MicL") for iv in intervals if iv.has_channel("MicL")),
|
||||
default=0,
|
||||
)
|
||||
mic_peak_psi = mic_count_to_psi(mic_peak_count) if mic_peak_count else None
|
||||
rep = IdfReport(
|
||||
serial_number=md.serial,
|
||||
|
||||
@@ -0,0 +1,89 @@
|
||||
r"""Decode the Thor / Micromate (series-4) sensor self-check waveforms from an
|
||||
IDFW event binary.
|
||||
|
||||
Reverse-engineered 2026-09-15 against 4 UM (Thor) oracle events. The IDFW
|
||||
binary carries the sensor self-check in its fixed-header region (before the
|
||||
waveform body), as up to four records tagged ``01 0e 3c/3d/3e/3f`` — the SAME
|
||||
channel ids as the series-3 MiniMate Plus (Tran / Vert / Long / MicL), which is
|
||||
the physical self-test:
|
||||
|
||||
* 3c / 3d / 3e = Tran / Vert / Long geophone ring-downs (a damped impulse
|
||||
response — resonant frequency + damping).
|
||||
* 3f = MicL pulse train (the mic's known-signal gain check). Absent
|
||||
on three-channel (mic-disabled) units.
|
||||
|
||||
Record framing (per record)::
|
||||
|
||||
01 0e [id:1] [flags:3] [count:2 BE] [pad:10] [int16-BE samples × count]
|
||||
\___ 18-byte header ___/
|
||||
|
||||
Unlike series-3's delta-coded trailing block, series-4 stores each trace as a
|
||||
raw int16 big-endian array. ``count`` (the 2-byte field at header offset +8)
|
||||
is the sample count; the record is padded to a fixed stride after that.
|
||||
"""
|
||||
from __future__ import annotations
|
||||
|
||||
import struct
|
||||
from typing import Dict, List
|
||||
|
||||
# Record id → channel. Same ids/order as series-3 (minimateplus.sensor_check).
|
||||
_ID_TO_CHANNEL = {0x3C: "Tran", 0x3D: "Vert", 0x3E: "Long", 0x3F: "MicL"}
|
||||
_CHAIN_IDS = (0x3C, 0x3D, 0x3E, 0x3F)
|
||||
|
||||
_MARKER = b"\x01\x0e" # precedes the 1-byte channel id
|
||||
_HEADER_LEN = 18 # bytes from the marker start to the first sample
|
||||
_COUNT_OFF = 8 # 2-byte BE sample count, from the marker start
|
||||
_MAX_COUNT = 4000 # sanity cap (traces are ~70-200 samples)
|
||||
|
||||
|
||||
def _find_chain(raw: bytes):
|
||||
"""Locate the sensor-check record chain. Returns a list of
|
||||
``(offset, id, count)`` for the first run of markers whose ids run
|
||||
3c, 3d, 3e[, 3f] in order, or ``[]``.
|
||||
|
||||
Records are padded to a fixed stride, so the next marker is not at
|
||||
``header + count*2``; instead collect every ``01 0e [id]`` marker with a
|
||||
sane count and take the first id-ordered run. Validating the id sequence
|
||||
(not a lone ``01 0e 3c``) keeps a stray marker in the waveform body from
|
||||
matching — the real chain sits in the fixed header, ahead of the body.
|
||||
"""
|
||||
n = len(raw)
|
||||
markers = []
|
||||
for p in range(n - _HEADER_LEN):
|
||||
if raw[p:p + 2] == _MARKER and raw[p + 2] in _ID_TO_CHANNEL:
|
||||
count = int.from_bytes(raw[p + _COUNT_OFF:p + _COUNT_OFF + 2], "big")
|
||||
if 0 < count <= _MAX_COUNT:
|
||||
markers.append((p, raw[p + 2], count))
|
||||
|
||||
for i, (off, rid, _c) in enumerate(markers):
|
||||
if rid != 0x3C:
|
||||
continue
|
||||
run = [markers[i]]
|
||||
for m in markers[i + 1:]:
|
||||
if len(run) < len(_CHAIN_IDS) and m[1] == _CHAIN_IDS[len(run)]:
|
||||
run.append(m)
|
||||
else:
|
||||
break
|
||||
if len(run) >= 3: # 3-channel (mic-disabled) units are valid
|
||||
return run
|
||||
return []
|
||||
|
||||
|
||||
def decode_idf_sensor_check(raw: bytes) -> Dict[str, List[int]]:
|
||||
"""Decode the sensor self-check traces from a Thor/Micromate IDFW binary.
|
||||
|
||||
Returns ``{"Tran": [...], "Vert": [...], "Long": [...], "MicL": [...]}`` in
|
||||
raw int16 ADC counts (MicL omitted on 3-channel units), or ``{}`` if the
|
||||
binary carries no sensor-check chain (a non-IDF file, or an IDFH histogram).
|
||||
"""
|
||||
chain = _find_chain(raw)
|
||||
if not chain:
|
||||
return {}
|
||||
out: Dict[str, List[int]] = {}
|
||||
for off, rid, count in chain:
|
||||
start = off + _HEADER_LEN
|
||||
blob = raw[start:start + count * 2]
|
||||
if len(blob) < count * 2:
|
||||
continue
|
||||
out[_ID_TO_CHANNEL[rid]] = list(struct.unpack(">%dh" % count, blob))
|
||||
return out
|
||||
@@ -0,0 +1,75 @@
|
||||
"""Structural annotation of a Series-3 Blastware waveform binary.
|
||||
|
||||
Pure, no I/O: takes the raw file bytes and returns a flat, gap-free tiling of
|
||||
labelled :class:`Span` regions for a hex viewer to paint. Every byte is
|
||||
covered — anything the decoder can't account for becomes an ``unknown`` span,
|
||||
so undecoded regions (e.g. a stored spectral/FFT block, if one exists) stand
|
||||
out instead of hiding.
|
||||
|
||||
File layout (see ``blastware_file.py``): ``[header][21B STRT][body][26B footer]``.
|
||||
The body is the record chain walked by :func:`waveform_codec.walk_records`.
|
||||
"""
|
||||
from __future__ import annotations
|
||||
|
||||
from dataclasses import dataclass
|
||||
from typing import List
|
||||
|
||||
from .waveform_codec import walk_records
|
||||
|
||||
_STRT_LEN = 21
|
||||
_FOOTER_LEN = 26
|
||||
|
||||
|
||||
@dataclass
|
||||
class Span:
|
||||
start: int # inclusive byte offset
|
||||
end: int # exclusive byte offset
|
||||
label: str # human-readable description
|
||||
kind: str # 'header' | 'strt' | 'sample' | 'footer' | 'unknown'
|
||||
|
||||
|
||||
def _tile(known: List[Span], total: int) -> List[Span]:
|
||||
"""Sort *known* spans and fill every gap with an ``unknown`` span, so the
|
||||
result is a contiguous, non-overlapping tiling of ``[0, total)``. Overlaps
|
||||
are resolved by clamping to the running position (first writer wins)."""
|
||||
out: List[Span] = []
|
||||
pos = 0
|
||||
for s in sorted(known, key=lambda x: (x.start, x.end)):
|
||||
if s.end <= pos:
|
||||
continue # fully behind — dropped overlap
|
||||
start = max(s.start, pos)
|
||||
if start > pos:
|
||||
out.append(Span(pos, start, "unknown", "unknown"))
|
||||
out.append(s if start == s.start else Span(start, s.end, s.label, s.kind))
|
||||
pos = s.end
|
||||
if pos < total:
|
||||
out.append(Span(pos, total, "unknown", "unknown"))
|
||||
return out
|
||||
|
||||
|
||||
def annotate_blastware_binary(raw: bytes) -> List[Span]:
|
||||
"""Annotate a Series-3 waveform binary into a gap-free list of spans."""
|
||||
total = len(raw)
|
||||
strt_pos = raw.find(b"STRT")
|
||||
if strt_pos < 0:
|
||||
return [Span(0, total, "unrecognized — no STRT record", "unknown")]
|
||||
|
||||
known: List[Span] = []
|
||||
if strt_pos > 0:
|
||||
known.append(Span(0, strt_pos, "File header", "header"))
|
||||
known.append(Span(strt_pos, strt_pos + _STRT_LEN, "STRT record", "strt"))
|
||||
|
||||
body_start = strt_pos + _STRT_LEN
|
||||
footer_start = total - _FOOTER_LEN
|
||||
if footer_start >= body_start:
|
||||
known.append(Span(footer_start, total, "File footer", "footer"))
|
||||
else:
|
||||
footer_start = total # file too short for a footer
|
||||
|
||||
body = raw[body_start:footer_start]
|
||||
for rec in walk_records(body):
|
||||
hi, lo = rec["mode"]
|
||||
label = f"{rec['channel']} record (seg {rec['segment_index']}, mode {hi:02x} {lo:02x})"
|
||||
known.append(Span(body_start + rec["offset"], body_start + rec["end"], label, "sample"))
|
||||
|
||||
return _tile(known, total)
|
||||
@@ -30,6 +30,7 @@ from __future__ import annotations
|
||||
|
||||
import datetime
|
||||
import logging
|
||||
import re
|
||||
import struct
|
||||
from typing import Optional
|
||||
|
||||
@@ -2532,10 +2533,17 @@ def _decode_0a_partial_header(raw_data: bytes, index: int, key4: bytes) -> Optio
|
||||
ts2 = try_ts(raw_data[ts1_end + 1:ts1_end + 1 + ts_size])
|
||||
|
||||
# Extract serial and geo threshold from "BE11529\0" and "Geo: X.XXX in/s\0".
|
||||
#
|
||||
# Match any two-letter family prefix, not a literal "BE" — a BlastMate
|
||||
# reports "BA10895", and the old `find(b"BE")` returned -1 on one. That
|
||||
# skipped this whole block, so the geo threshold went missing along with
|
||||
# the serial. Requiring the NUL terminator in the pattern also makes the
|
||||
# match stricter than the bare two-byte search it replaces.
|
||||
serial: Optional[str] = None
|
||||
geo_ips: Optional[float] = None
|
||||
|
||||
serial_pos = raw_data.find(b"BE")
|
||||
serial_match = re.search(rb"[A-Z]{2}\d{3,6}(?=\x00)", raw_data)
|
||||
serial_pos = serial_match.start() if serial_match else -1
|
||||
if serial_pos >= 0:
|
||||
# Read null-terminated serial starting at serial_pos.
|
||||
null_pos = raw_data.find(b"\x00", serial_pos)
|
||||
|
||||
@@ -50,7 +50,7 @@ SIDECAR_KIND = "sfm.event"
|
||||
# bumped without a `pip install` re-run — leading to confusing stale
|
||||
# version stamps in sidecars. Bump this constant and CHANGELOG.md
|
||||
# together at release time.
|
||||
TOOL_VERSION = "0.26.0"
|
||||
TOOL_VERSION = "0.31.0" # +/sensor_check group (schema v2); gates the backfill regen
|
||||
|
||||
try:
|
||||
# Best-effort: prefer the installed metadata when it's NEWER than the
|
||||
@@ -960,6 +960,11 @@ def read_blastware_file(path: Union[str, Path]) -> Event:
|
||||
project=project, client=client, operator=user, sensor_location=seisloc,
|
||||
)
|
||||
ev.raw_samples = samples
|
||||
# Sensor self-check traces from the binary's trailing block (waveform
|
||||
# events only; returns {} for histograms / when absent). Carried on the
|
||||
# Event so the .h5 writer persists them device-agnostically.
|
||||
from minimateplus.sensor_check import decode_sensor_check
|
||||
ev.sensor_check = decode_sensor_check(raw) or None
|
||||
# Only compute peaks from samples when we actually have samples.
|
||||
# For events the codec couldn't decode (histogram-mode bodies, until
|
||||
# the §7.6.2 histogram codec is wired in), samples is an empty dict
|
||||
|
||||
@@ -413,10 +413,18 @@ def detect_multi_interval_stride(body: bytes) -> Optional[int]:
|
||||
|
||||
if (_ctr(stride) - _ctr(0)) & 0xFFFF != 1:
|
||||
continue
|
||||
# confirm on a third block when the body is long enough
|
||||
if 2 * stride + _MULTI_HEADER_LEN <= len(body):
|
||||
if not _is_multi_header(body, 2 * stride):
|
||||
continue
|
||||
# Confirm on a third block WHEN ONE IS ACTUALLY PRESENT. A body can
|
||||
# be longer than two strides and still hold only two real blocks: a
|
||||
# final *partial* block leaves trailing padding. E.g. 51 intervals at
|
||||
# 2 s = one full 30-interval block + a 21-interval remainder, in a
|
||||
# 2787-byte body — long enough to demand a third header at 1224 that
|
||||
# does not exist. Requiring it unconditionally threw away the correct
|
||||
# stride and the file decoded to nothing (BE18193 T193L0XM.CI0H).
|
||||
# The block-counter check above is the decisive anti-false-positive
|
||||
# test; this one is corroboration, so a missing third header means
|
||||
# end-of-stream, not disqualification.
|
||||
if (2 * stride + _MULTI_HEADER_LEN <= len(body)
|
||||
and _is_multi_header(body, 2 * stride)):
|
||||
if (_ctr(2 * stride) - _ctr(stride)) & 0xFFFF != 1:
|
||||
continue
|
||||
return stride
|
||||
|
||||
@@ -544,6 +544,15 @@ class Event:
|
||||
pretrig_samples: Optional[int] = None # from STRT record: pre-trigger sample count
|
||||
rectime_seconds: Optional[int] = None # from STRT record: record duration (seconds)
|
||||
|
||||
# Sensor self-check traces keyed by channel label — the short diagnostic
|
||||
# waveforms the unit records when it pulses each sensor before monitoring
|
||||
# (geophone ring-downs + a mic pulse train). Decoded from the binary by
|
||||
# the per-series decoder (minimateplus.sensor_check / micromate.sensor_check)
|
||||
# and carried here so the .h5 writer can persist them device-agnostically.
|
||||
# Raw ADC counts; the source series' scale differs but the trace is a
|
||||
# shape diagnostic (rendered fit-to-box). None when absent.
|
||||
sensor_check: Optional[dict] = None # {"Tran": [...], ..., "MicL": [...]}
|
||||
|
||||
# ── Debug / introspection ─────────────────────────────────────────────────
|
||||
# Raw 210-byte waveform record bytes, set when debug mode is active.
|
||||
# Exposed by the SFM server via ?debug=true so field layouts can be verified.
|
||||
|
||||
@@ -0,0 +1,146 @@
|
||||
r"""Decode the Blastware sensor self-check waveforms from a series-3 event binary.
|
||||
|
||||
Reverse-engineered 2026-09-15 against 7 BE12844 (MiniMate Plus) oracle events.
|
||||
After the main waveform record-chain and the trailing metadata / per-channel
|
||||
calibration records, the binary carries four length-prefixed records tagged
|
||||
0x3c-0x3f: the sensor self-check traces the unit records when it pulses each
|
||||
sensor before monitoring. Blastware draws these as the little waveforms in the
|
||||
"Sensor Check" strip on the right of the Event Report.
|
||||
|
||||
* 0x3c / 0x3d / 0x3e = Tran / Vert / Long geophone ring-downs (a damped
|
||||
oscillation at the geophone's resonance, ~7-8 Hz at 1024 sps).
|
||||
* 0x3f = MicL, a pulse train at the mic self-test frequency
|
||||
(~20 Hz), whose zero-crossing frequency is BW's mic "Channel Test" freq.
|
||||
|
||||
Record framing (per record, all four chained by their length prefix)::
|
||||
|
||||
[len:2 BE][id:1][00 00][Nchan:1][12-byte header][delta stream][40 02][6B]
|
||||
\_________________ payload (len bytes) _______________________________/
|
||||
|
||||
The delta stream is ``payload[20 : len-8]`` (the ``40 02`` terminator sits at
|
||||
``len-8``, followed by 6 trailing bytes). It uses the exact same 10/20/30/00
|
||||
delta-block tags as the main waveform codec
|
||||
(:mod:`minimateplus.waveform_codec`), decoded here from an implicit anchor of 0
|
||||
— so the traces come out in the same 16-count raw units as the main waveform
|
||||
(LSB = 0.005 in/s at Normal range for the geophones).
|
||||
"""
|
||||
from __future__ import annotations
|
||||
|
||||
from typing import Dict, List
|
||||
|
||||
from minimateplus.waveform_codec import walk_body
|
||||
|
||||
# Record id → channel. Order mirrors the trailing per-channel calibration
|
||||
# records (Tran / Vert / Long / MicL), confirmed against BW's sensor-check
|
||||
# frequencies on all 7 oracle events.
|
||||
_ID_TO_CHANNEL = {0x3C: "Tran", 0x3D: "Vert", 0x3E: "Long", 0x3F: "MicL"}
|
||||
_CHAIN_IDS = (0x3C, 0x3D, 0x3E, 0x3F)
|
||||
|
||||
_HEADER_LEN = 20 # payload bytes before the delta stream
|
||||
_TRAILER_LEN = 8 # 40 02 terminator + 6 trailing bytes after the stream
|
||||
|
||||
|
||||
def _s4(nib: int) -> int:
|
||||
"""Sign-extend a 4-bit nibble delta."""
|
||||
return nib - 16 if nib >= 8 else nib
|
||||
|
||||
|
||||
def _i8(byte: int) -> int:
|
||||
"""Sign-extend an 8-bit int delta."""
|
||||
return byte - 256 if byte >= 128 else byte
|
||||
|
||||
|
||||
def _decode_delta_stream(buf: bytes) -> List[int]:
|
||||
"""Accumulate a 10/20/30/00 delta-block stream from an anchor of 0,
|
||||
stopping at the 0x40 terminator.
|
||||
|
||||
Mirrors the block semantics in
|
||||
:func:`minimateplus.waveform_codec.decode_waveform_v2` (fully decoded &
|
||||
byte-exact as of 2026-05-11); see that module for the format details.
|
||||
"""
|
||||
out: List[int] = []
|
||||
cur = 0
|
||||
for blk in walk_body(buf, 0):
|
||||
fam = blk.tag_hi & 0xF0
|
||||
if fam == 0x10:
|
||||
# nibble deltas, high nibble first
|
||||
for byte in blk.data:
|
||||
for nib in ((byte >> 4) & 0xF, byte & 0xF):
|
||||
cur += _s4(nib)
|
||||
out.append(cur)
|
||||
elif fam == 0x20:
|
||||
# int8 deltas
|
||||
for byte in blk.data:
|
||||
cur += _i8(byte)
|
||||
out.append(cur)
|
||||
elif fam == 0x30:
|
||||
# 12-bit signed deltas, packed as tag_lo/4 groups of 6 bytes
|
||||
for g in range(blk.tag_lo // 4):
|
||||
grp = blk.data[g * 6:(g + 1) * 6]
|
||||
if len(grp) < 6:
|
||||
break
|
||||
high_word = (grp[0] << 8) | grp[1]
|
||||
for k in range(4):
|
||||
nib = (high_word >> (12 - 4 * k)) & 0xF
|
||||
v = (nib << 8) | grp[2 + k]
|
||||
if v >= 0x800:
|
||||
v -= 0x1000
|
||||
cur += v
|
||||
out.append(cur)
|
||||
elif fam == 0x00:
|
||||
# RLE zero-delta run (wide form carries the high nibble in the tag)
|
||||
run = ((blk.tag_hi & 0x0F) << 8) | blk.tag_lo
|
||||
out.extend([cur] * run)
|
||||
elif fam == 0x40:
|
||||
# segment / record terminator
|
||||
break
|
||||
return out
|
||||
|
||||
|
||||
def _find_chain(body: bytes):
|
||||
"""Locate the four length-prefixed sensor-check records.
|
||||
|
||||
Returns a list of ``(offset, id, length)`` or ``None``. The chain is
|
||||
validated by walking the ids 0x3c → 0x3d → 0x3e → 0x3f via their own length
|
||||
prefixes, so a stray 0x3c byte in the waveform data cannot match.
|
||||
"""
|
||||
for p in range(len(body) - 6):
|
||||
if body[p + 2] == 0x3C and body[p + 3] == 0 and body[p + 4] == 0:
|
||||
q = p
|
||||
recs = []
|
||||
ok = True
|
||||
for expect in _CHAIN_IDS:
|
||||
if q + 3 > len(body) or body[q + 2] != expect:
|
||||
ok = False
|
||||
break
|
||||
length = int.from_bytes(body[q:q + 2], "big")
|
||||
recs.append((q, expect, length))
|
||||
q = q + 2 + length
|
||||
if ok and len(recs) == 4:
|
||||
return recs
|
||||
return None
|
||||
|
||||
|
||||
def decode_sensor_check(raw: bytes) -> Dict[str, List[int]]:
|
||||
"""Decode the four sensor self-check traces from a series-3 event binary.
|
||||
|
||||
Returns ``{"Tran": [...], "Vert": [...], "Long": [...], "MicL": [...]}`` in
|
||||
raw decode units (same 16-count LSB as the main waveform), or ``{}`` if the
|
||||
binary carries no sensor-check block (a histogram event, a non-series-3
|
||||
file, or a unit/firmware that doesn't store it).
|
||||
"""
|
||||
strt = raw.find(b"STRT")
|
||||
if strt < 0 or len(raw) < strt + 21 + 26:
|
||||
return {}
|
||||
body = raw[strt + 21: len(raw) - 26]
|
||||
chain = _find_chain(body)
|
||||
if not chain:
|
||||
return {}
|
||||
out: Dict[str, List[int]] = {}
|
||||
for off, rid, length in chain:
|
||||
payload = body[off + 2: off + 2 + length]
|
||||
if len(payload) < _HEADER_LEN + _TRAILER_LEN:
|
||||
continue
|
||||
stream = payload[_HEADER_LEN: length - _TRAILER_LEN]
|
||||
out[_ID_TO_CHANNEL[rid]] = _decode_delta_stream(stream)
|
||||
return out
|
||||
@@ -722,7 +722,18 @@ STREAM_END_ID = 0x06
|
||||
MODE_DELTA = (0x02, 0x00)
|
||||
MODE_ABSOLUTE = (0x01, 0x00)
|
||||
MODE_RAW12 = (0x00, 0x03)
|
||||
_MODES = (MODE_DELTA, MODE_ABSOLUTE, MODE_RAW12)
|
||||
# Raw int16 BE absolute samples, 10-byte header, no tags — the same shape as
|
||||
# MODE_RAW12 but two bytes per sample instead of 1.5. Found on Thor/Micromate
|
||||
# segment-0 records (2026-09-10): a `len=1032` record carries exactly
|
||||
# (1032 - 8) / 2 = 512 samples and reproduces Thor's own export 512/512
|
||||
# exactly. Before this mode existed the record fell through the dispatch
|
||||
# unhandled, so the channel silently lost its first 512 samples.
|
||||
MODE_RAW16 = (0x00, 0x00)
|
||||
_MODES = (MODE_DELTA, MODE_ABSOLUTE, MODE_RAW12, MODE_RAW16)
|
||||
|
||||
# Preambles whose leading data is untagged and therefore cannot be
|
||||
# block-walked; find_first_record() must scan for the next record instead.
|
||||
_UNTAGGED_MODES = (MODE_RAW12, MODE_RAW16)
|
||||
|
||||
|
||||
def _u16(b: bytes, p: int) -> int:
|
||||
@@ -747,7 +758,18 @@ def data_block_len(body: bytes, p: int) -> Tuple[Optional[int], Optional[int]]:
|
||||
hi = t0 & 0xF0
|
||||
nn = ((t0 & 0x0F) << 8) | t1
|
||||
if hi == 0x40: # int16 BE data block
|
||||
return (None, None) if (nn == 0 or nn > 0x08) else (2 * nn + 2, nn)
|
||||
# NN was capped at 0x08 until 2026-09-11. That cap had no basis: the
|
||||
# two corpora available at the time only ever used NN in {1,2,3,4,8},
|
||||
# so it was never exercised. Loud UM12947 events use NN of 12, 16,
|
||||
# 20 ... up to 196, and every value above 8 halted the walk, which
|
||||
# surfaced as silently short channels (walk_body/run stop at the first
|
||||
# unrecognised tag rather than raising). Verified against Thor's own
|
||||
# exports: 22 length-mismatched files -> 0, and the affected corpus
|
||||
# went to 1,476,242/1,476,249 samples exact. The real bound is the
|
||||
# buffer; the caller additionally clamps to the record end.
|
||||
if nn == 0 or p + 2 * nn + 2 > len(body):
|
||||
return None, None
|
||||
return 2 * nn + 2, nn
|
||||
if nn == 0 or nn % 4:
|
||||
return None, None
|
||||
if hi == 0x00:
|
||||
@@ -761,6 +783,11 @@ def data_block_len(body: bytes, p: int) -> Tuple[Optional[int], Optional[int]]:
|
||||
return None, None
|
||||
|
||||
|
||||
def unpack16(data: bytes) -> List[int]:
|
||||
"""Raw int16 BE absolute samples (MODE_RAW16)."""
|
||||
return [_i16(data, 2 * k) for k in range(len(data) // 2)]
|
||||
|
||||
|
||||
def unpack12(data: bytes) -> List[int]:
|
||||
"""Raw 12-bit packed samples: 6 bytes -> 4 signed values."""
|
||||
out: List[int] = []
|
||||
@@ -785,13 +812,17 @@ def find_first_record(body: bytes) -> Optional[int]:
|
||||
"""Offset of the first record, or None.
|
||||
|
||||
Under the normal ``00 02 00`` preamble the leading bytes are segment-0's
|
||||
Tran blocks, so walk them. Under the ``00 00 03`` preamble that data is
|
||||
raw 12-bit with no tags at all and cannot be block-walked — scan instead.
|
||||
Tran blocks, so walk them. Under the untagged preambles (``00 00 03``
|
||||
raw-12 and ``00 00 00`` raw-16) that data has no tags at all and cannot
|
||||
be block-walked — scan for the next record header instead.
|
||||
"""
|
||||
if len(body) >= 3 and (body[1], body[2]) == MODE_RAW12:
|
||||
if len(body) >= 3 and (body[1], body[2]) in _UNTAGGED_MODES:
|
||||
scan_from = 3
|
||||
else:
|
||||
i = 7
|
||||
# Tagged preamble. MODE_DELTA carries a 14-byte record header (two
|
||||
# int16 anchors), so its blocks start at body[7]; MODE_ABSOLUTE has a
|
||||
# 10-byte header and starts at body[3].
|
||||
i = 3 if (len(body) >= 3 and (body[1], body[2]) == MODE_ABSOLUTE) else 7
|
||||
while i < len(body):
|
||||
if is_record(body, i):
|
||||
nxt = i + 2 + _u16(body, i + 2)
|
||||
@@ -850,7 +881,7 @@ def decode_waveform_v2(body: bytes) -> Optional[dict]:
|
||||
if len(body) < 8 or body[0] != 0x00:
|
||||
return None
|
||||
preamble = (body[1], body[2])
|
||||
if preamble not in (MODE_DELTA, MODE_RAW12):
|
||||
if preamble not in (MODE_DELTA, MODE_ABSOLUTE, MODE_RAW12, MODE_RAW16):
|
||||
return None
|
||||
first = find_first_record(body)
|
||||
if first is None:
|
||||
@@ -895,6 +926,10 @@ def decode_waveform_v2(body: bytes) -> Optional[dict]:
|
||||
if preamble == MODE_DELTA:
|
||||
out["Tran"].extend([_i16(body, 3), _i16(body, 5)])
|
||||
run("Tran", 7, first, absolute=False)
|
||||
elif preamble == MODE_ABSOLUTE:
|
||||
run("Tran", 3, first, absolute=True)
|
||||
elif preamble == MODE_RAW16:
|
||||
out["Tran"].extend(unpack16(body[3:first]))
|
||||
else:
|
||||
out["Tran"].extend(unpack12(body[3:first]))
|
||||
|
||||
@@ -908,4 +943,6 @@ def decode_waveform_v2(body: bytes) -> Optional[dict]:
|
||||
run(ch, off + 10, end, absolute=True)
|
||||
elif mode == MODE_RAW12:
|
||||
out[ch].extend(unpack12(body[off + 10:end]))
|
||||
elif mode == MODE_RAW16:
|
||||
out[ch].extend(unpack16(body[off + 10:end]))
|
||||
return out
|
||||
|
||||
+1
-1
@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
|
||||
|
||||
[project]
|
||||
name = "seismo-relay"
|
||||
version = "0.26.0"
|
||||
version = "0.31.0"
|
||||
description = "Python client and REST server for MiniMate Plus seismographs"
|
||||
requires-python = ">=3.10"
|
||||
dependencies = [
|
||||
|
||||
@@ -0,0 +1,91 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Detect NON-MOTION on a geophone channel: |mean| / peak.
|
||||
|
||||
A geophone is a velocity sensor with no DC response, so its output over a
|
||||
record must integrate to ~zero — the ground does not relocate. Real motion
|
||||
therefore sits roughly half above and half below zero. Anything electrical —
|
||||
a charge-injection spike, a step, a parked pedestal — is one-sided.
|
||||
|
||||
mp = |mean| / peak ~0 for motion, ~1 for a pedestal
|
||||
frac_neg = share of samples < 0 ~0.3-0.5 for motion, ~0 for a fault
|
||||
|
||||
Why this beats the pre-trigger floor (`offset_scan3.py`): that detector's
|
||||
`spread <= 0.02` gate rejects any record whose floor is MOVING, which is
|
||||
exactly what an onset is — it discarded the one BE18438 record in which the
|
||||
ramp was visible. This test is indifferent to whether the fault is a spike,
|
||||
a ramp or a flat pedestal; none of them cross zero.
|
||||
|
||||
⚠ Not a rediscovery of the retracted v1 detector. v1 scored only the
|
||||
largest-peak axis and used the mean as a BASELINE estimator, where the median
|
||||
was required. Here the mean is the signal itself, per channel, and that is
|
||||
what the physics licenses.
|
||||
"""
|
||||
from __future__ import annotations
|
||||
import argparse, csv, re, statistics, sys
|
||||
from concurrent.futures import ProcessPoolExecutor, as_completed
|
||||
from pathlib import Path
|
||||
sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
|
||||
from minimateplus.event_file_io import read_blastware_file
|
||||
|
||||
GEO=("Tran","Vert","Long"); K=10.0/32000.0
|
||||
_WAVE=re.compile(r"\.[A-Za-z0-9]{2}0[Ww]$"); _STEM=re.compile(r"^([B-Z])(\d{3})")
|
||||
_SER=re.compile(rb"[A-Z]{2}\d{3,6}")
|
||||
|
||||
def serial_of(name, path=None):
|
||||
m=_STEM.match(name)
|
||||
if not m: return "?"
|
||||
num=(ord(m.group(1))-ord("B"))*1000+int(m.group(2))
|
||||
if path is not None:
|
||||
try:
|
||||
for s in _SER.findall(Path(path).read_bytes()):
|
||||
s=s.decode()
|
||||
if s[2:].lstrip("0")==str(num): return s
|
||||
except Exception: pass
|
||||
return f"BE{num}"
|
||||
|
||||
def scan(ps):
|
||||
import logging; logging.disable(logging.WARNING)
|
||||
p=Path(ps)
|
||||
try: ev=read_blastware_file(p)
|
||||
except Exception: return None
|
||||
s=ev.raw_samples or {}
|
||||
if not all(s.get(c) for c in GEO): return None
|
||||
ts=ev.timestamp
|
||||
stamp=(f"{ts.year:04d}-{ts.month:02d}-{ts.day:02d}T"
|
||||
f"{ts.hour:02d}:{ts.minute:02d}:{ts.second:02d}") if ts else ""
|
||||
ser=serial_of(p.name,p); out=[]
|
||||
for ch in GEO:
|
||||
a=[x*K for x in s[ch]]
|
||||
pk=max(abs(x) for x in a)
|
||||
if pk<=0: continue
|
||||
out.append({"serial":ser,"timestamp":stamp,"filename":p.name,"channel":ch,
|
||||
"peak":round(pk,4),
|
||||
"mean":round(statistics.fmean(a),4),
|
||||
"mp":round(abs(statistics.fmean(a))/pk,4),
|
||||
"frac_neg":round(sum(1 for x in a if x<0)/len(a),4),
|
||||
"n":len(a)})
|
||||
return out
|
||||
|
||||
COLS=["serial","timestamp","filename","channel","peak","mean","mp","frac_neg","n"]
|
||||
|
||||
def main():
|
||||
ap=argparse.ArgumentParser()
|
||||
ap.add_argument("--dir",required=True); ap.add_argument("--out",required=True)
|
||||
ap.add_argument("--jobs",type=int,default=4)
|
||||
a=ap.parse_args()
|
||||
seen=set(); files=[]
|
||||
for q in sorted(Path(a.dir).rglob("*")):
|
||||
if q.is_file() and _WAVE.search(q.name) and q.name not in seen:
|
||||
seen.add(q.name); files.append(str(q))
|
||||
print(f"unique waveform binaries: {len(files)}",flush=True)
|
||||
rows=[]
|
||||
with ProcessPoolExecutor(max_workers=a.jobs) as ex:
|
||||
for i,f in enumerate(as_completed([ex.submit(scan,p) for p in files]),1):
|
||||
r=f.result()
|
||||
if r: rows.extend(r)
|
||||
if i%1000==0: print(f" {i}/{len(files)}",flush=True)
|
||||
with open(a.out,"w",newline="") as fh:
|
||||
w=csv.DictWriter(fh,fieldnames=COLS); w.writeheader(); w.writerows(rows)
|
||||
print(f"\nwrote {a.out} ({len(rows)} channel-rows)")
|
||||
|
||||
if __name__=="__main__": main()
|
||||
@@ -0,0 +1,234 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Offset detector — HISTOGRAM corpus (the other 90% of the archive).
|
||||
|
||||
`offset_scan3.py` measures the pre-trigger floor in *waveform* samples. That
|
||||
covers 6,577 of the archive's 70,112 unique series-3 files; the remaining
|
||||
63,535 are **histograms**, which carry no samples — only a per-interval,
|
||||
per-channel peak + half-period. So the pre-trigger method cannot run on them.
|
||||
|
||||
The histogram analogue of "the resting floor" is the **low percentile of the
|
||||
per-interval peaks**. A histogram file is typically hours of continuous
|
||||
monitoring, so the great majority of its intervals are definitionally quiet;
|
||||
the bottom of that distribution is what the channel reads when nothing is
|
||||
happening. A healthy channel bottoms out at 0.000-0.005 in/s. A channel
|
||||
parked off zero cannot report a peak below its own displacement, so its floor
|
||||
is pinned up.
|
||||
|
||||
⚠ The DC leakage into the histogram peak is PARTIAL. Measured within-unit
|
||||
against episodes already established from the waveform scan:
|
||||
|
||||
BE18438 Vert in-episode 0.0350 vs 0.0050 outside (waveform pre = +0.18..+0.37)
|
||||
BE12599 Tran in-episode 0.0250 vs 0.0050 outside (waveform pre = +0.03..+0.49)
|
||||
|
||||
so the device's per-interval peak is evidently measured against a running /
|
||||
AC-coupled baseline that removes most, but not all, of the DC. The residual
|
||||
is real and channel-specific, but the margin is ~5 quantisation counts rather
|
||||
than the ~70 the waveform detector enjoys. Do not carry the waveform
|
||||
detector's 0.025 in/s floor across unexamined — calibrate on the CSV.
|
||||
|
||||
Because the absolute floor also moves with site noise (traffic, wind, a
|
||||
generator), the statistic that matters most is the **cross-channel
|
||||
differential**: a channel's floor minus the quietest of the other two geo
|
||||
channels in the same file. Site noise lifts all three together and cancels;
|
||||
a DC offset lifts one.
|
||||
|
||||
This script does not decide anything. It emits every candidate statistic per
|
||||
(file, channel) so thresholds can be calibrated against the waveform-derived
|
||||
ground truth in `offset_v3.csv` rather than guessed.
|
||||
|
||||
Usage:
|
||||
python scratch/offset_hist_scan.py --dir /home/serversdown/dl2-archive/files \
|
||||
--out /home/serversdown/dl2-archive/offset_hist.csv --jobs 4
|
||||
"""
|
||||
from __future__ import annotations
|
||||
|
||||
import argparse
|
||||
import csv
|
||||
import datetime
|
||||
import logging
|
||||
import re
|
||||
import statistics
|
||||
import sys
|
||||
from concurrent.futures import ProcessPoolExecutor, as_completed
|
||||
from pathlib import Path
|
||||
|
||||
sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
|
||||
from minimateplus.event_file_io import read_blastware_file # noqa: E402
|
||||
|
||||
GEO = ("Tran", "Vert", "Long")
|
||||
K = 10.0 / 32000.0 # ADC count -> in/s (see CLAUDE.md: full scale 32000)
|
||||
_HIST = re.compile(r"\.[A-Za-z0-9]{2}0[Hh]$")
|
||||
_STEM = re.compile(r"^([B-Z])(\d{3})")
|
||||
_B36 = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"
|
||||
|
||||
|
||||
_SERIAL_RE = re.compile(rb"\b([A-Z]{2}\d{3,6})\b")
|
||||
|
||||
|
||||
def serial_of(name: str, path=None) -> str:
|
||||
"""Real serial for a BW file.
|
||||
|
||||
The filename encodes only the NUMBER: `<letter><3 digits>` where
|
||||
letter = chr(ord('B') + serial // 1000). The two-letter family prefix
|
||||
("BE", "BA", ...) is **not** in the filename, so it must be read out of
|
||||
the file body. Four units in the DL2 archive are BA, not BE — assuming
|
||||
"BE" mislabels BA9229, BA10060, BA10895 and BA15957.
|
||||
"""
|
||||
m = _STEM.match(name)
|
||||
if not m:
|
||||
return "?"
|
||||
num = (ord(m.group(1)) - ord("B")) * 1000 + int(m.group(2))
|
||||
if path is not None:
|
||||
try:
|
||||
for s in _SERIAL_RE.findall(Path(path).read_bytes()):
|
||||
s = s.decode()
|
||||
if s[2:].lstrip("0") == str(num):
|
||||
return s
|
||||
except Exception:
|
||||
pass
|
||||
return f"BE{num}" # last-resort fallback; prefix unverified
|
||||
|
||||
|
||||
def stem_time(name: str):
|
||||
"""Decode the filename's base-36 timestamp. Epoch 1985-01-01, 1296 s/tick.
|
||||
|
||||
Preferred over the file's own footer timestamp only because it costs
|
||||
nothing; the caller falls back to the decoded event when this fails.
|
||||
"""
|
||||
try:
|
||||
base, ext = name.rsplit(".", 1)
|
||||
n = 0
|
||||
for c in base[4:8].upper():
|
||||
n = n * 36 + _B36.index(c)
|
||||
ab = _B36.index(ext[0].upper()) * 36 + _B36.index(ext[1].upper())
|
||||
return datetime.datetime(1985, 1, 1) + datetime.timedelta(seconds=n * 1296 + ab)
|
||||
except Exception:
|
||||
return None
|
||||
|
||||
|
||||
def _pct(sorted_vals, q):
|
||||
"""Nearest-rank percentile on an already-sorted list."""
|
||||
if not sorted_vals:
|
||||
return None
|
||||
i = min(len(sorted_vals) - 1, max(0, int(len(sorted_vals) * q / 100.0)))
|
||||
return sorted_vals[i]
|
||||
|
||||
|
||||
def scan(path_str: str):
|
||||
logging.disable(logging.WARNING) # per-worker: the codec warns on undecodables
|
||||
p = Path(path_str)
|
||||
try:
|
||||
ev = read_blastware_file(p)
|
||||
except Exception:
|
||||
return None
|
||||
s = ev.raw_samples or {}
|
||||
if not any(s.get(c) for c in GEO):
|
||||
return None
|
||||
|
||||
ts = stem_time(p.name) or ev.timestamp
|
||||
stamp = ""
|
||||
if ts is not None:
|
||||
stamp = (f"{ts.year:04d}-{ts.month:02d}-{ts.day:02d}T"
|
||||
f"{ts.hour:02d}:{ts.minute:02d}:{ts.second:02d}")
|
||||
|
||||
# Per-channel floor candidates, in in/s.
|
||||
stats = {}
|
||||
for ch in GEO:
|
||||
v = sorted(s.get(ch) or [])
|
||||
if not v:
|
||||
continue
|
||||
stats[ch] = {
|
||||
"n": len(v),
|
||||
"min": v[0] * K,
|
||||
"p1": _pct(v, 1) * K,
|
||||
"p5": _pct(v, 5) * K,
|
||||
"p10": _pct(v, 10) * K,
|
||||
"p25": _pct(v, 25) * K,
|
||||
"med": statistics.median(v) * K,
|
||||
"peak": v[-1] * K,
|
||||
"zeros": sum(1 for x in v if x == 0) / len(v),
|
||||
}
|
||||
if len(stats) < 2: # need at least one sibling channel for the differential
|
||||
return None
|
||||
|
||||
# Mic floor as a site-noise proxy (raw counts; the dB conversion is not
|
||||
# needed — only its relative movement matters here).
|
||||
mic = sorted(s.get("MicL") or [])
|
||||
mic_p5 = _pct(mic, 5) if mic else ""
|
||||
|
||||
rows = []
|
||||
for ch, st in stats.items():
|
||||
others = [stats[o]["p5"] for o in stats if o != ch]
|
||||
rows.append({
|
||||
"serial": serial_of(p.name, p),
|
||||
"timestamp": stamp,
|
||||
"filename": p.name,
|
||||
"channel": ch,
|
||||
"n_intervals": st["n"],
|
||||
"min": round(st["min"], 4),
|
||||
"p1": round(st["p1"], 4),
|
||||
"p5": round(st["p5"], 4),
|
||||
"p10": round(st["p10"], 4),
|
||||
"p25": round(st["p25"], 4),
|
||||
"median": round(st["med"], 4),
|
||||
"peak": round(st["peak"], 4),
|
||||
"frac_zero": round(st["zeros"], 4),
|
||||
# the site-noise-cancelling statistic: this channel's floor above
|
||||
# the quietest sibling geo channel in the same file
|
||||
"diff_p5": round(st["p5"] - min(others), 4),
|
||||
"mic_p5": mic_p5,
|
||||
})
|
||||
return rows
|
||||
|
||||
|
||||
COLS = ["serial", "timestamp", "filename", "channel", "n_intervals",
|
||||
"min", "p1", "p5", "p10", "p25", "median", "peak", "frac_zero",
|
||||
"diff_p5", "mic_p5"]
|
||||
|
||||
|
||||
def main():
|
||||
ap = argparse.ArgumentParser()
|
||||
ap.add_argument("--dir", required=True)
|
||||
ap.add_argument("--out", required=True)
|
||||
ap.add_argument("--jobs", type=int, default=4)
|
||||
ap.add_argument("--limit", type=int, default=0, help="stop after N files (smoke test)")
|
||||
a = ap.parse_args()
|
||||
|
||||
# Dedupe by basename — the DL2 export keeps a byte-identical `Sent/`
|
||||
# mirror of its root, which doubled two figures before it was caught.
|
||||
seen, files = set(), []
|
||||
for q in sorted(Path(a.dir).rglob("*")):
|
||||
if q.is_file() and _HIST.search(q.name) and q.name not in seen:
|
||||
seen.add(q.name)
|
||||
files.append(str(q))
|
||||
if a.limit:
|
||||
files = files[:a.limit]
|
||||
print(f"unique histogram binaries: {len(files)}", flush=True)
|
||||
|
||||
rows, undecodable = [], 0
|
||||
with ProcessPoolExecutor(max_workers=a.jobs) as ex:
|
||||
futs = [ex.submit(scan, f) for f in files]
|
||||
for i, fut in enumerate(as_completed(futs), 1):
|
||||
r = fut.result()
|
||||
if r:
|
||||
rows.extend(r)
|
||||
else:
|
||||
undecodable += 1
|
||||
if i % 5000 == 0:
|
||||
print(f" {i}/{len(files)}", flush=True)
|
||||
|
||||
with open(a.out, "w", newline="") as fh:
|
||||
w = csv.DictWriter(fh, fieldnames=COLS)
|
||||
w.writeheader()
|
||||
w.writerows(rows)
|
||||
|
||||
files_ok = len({r["filename"] for r in rows})
|
||||
units = len({r["serial"] for r in rows})
|
||||
ivals = sum(r["n_intervals"] for r in rows) // 3
|
||||
print(f"\ndecoded {files_ok}/{len(files)} files "
|
||||
f"({undecodable} undecodable), {units} units, ~{ivals/1e6:.1f}M intervals")
|
||||
print(f"wrote {a.out} ({len(rows)} channel-rows)")
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
||||
@@ -0,0 +1,171 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Scan series-3 waveform binaries for the 'offset' hardware fault.
|
||||
|
||||
A healthy geophone trace is centred on zero. An offset unit sits displaced,
|
||||
so the channel mean approaches its own peak. Detector (unchanged from the
|
||||
2026-08-25 run, see memory note `offset-archive-analysis-backlog`):
|
||||
|
||||
dominant-axis |mean| / peak > 0.7
|
||||
AND |mean| >= 0.9 * the unit's geo trigger level
|
||||
|
||||
Trigger level is read from a paired _ASCII.TXT where one exists, otherwise
|
||||
from a per-serial median learned across that unit's ASCII files, otherwise
|
||||
--default-trigger.
|
||||
|
||||
Serial is decoded from the BW filename: prefix letter encodes thousands
|
||||
(chr(ord('B') + n)), next 3 digits the remainder -- T193 -> BE18193.
|
||||
|
||||
Usage:
|
||||
python scratch/offset_scan.py --dir <path> [--jobs N] --out offsets.csv
|
||||
"""
|
||||
from __future__ import annotations
|
||||
|
||||
import argparse, csv, json, re, sys
|
||||
from collections import defaultdict
|
||||
from concurrent.futures import ProcessPoolExecutor, as_completed
|
||||
from pathlib import Path
|
||||
|
||||
sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
|
||||
|
||||
from minimateplus.event_file_io import read_blastware_file
|
||||
from minimateplus.bw_ascii_report import parse_report
|
||||
|
||||
GEO = ("Tran", "Vert", "Long")
|
||||
_GEO_FS_COUNTS = 32000.0
|
||||
_WAVE_RE = re.compile(r"\.[A-Za-z0-9]{2}0[Ww]$")
|
||||
_STEM_RE = re.compile(r"^([B-Z])(\d{3})")
|
||||
|
||||
MEAN_OVER_PEAK_MIN = 0.7
|
||||
TRIGGER_FRACTION = 0.9
|
||||
|
||||
|
||||
def serial_from_name(name: str):
|
||||
m = _STEM_RE.match(name)
|
||||
if not m:
|
||||
return None
|
||||
letter, digits = m.group(1), m.group(2)
|
||||
return f"BE{(ord(letter) - ord('B')) * 1000 + int(digits)}"
|
||||
|
||||
|
||||
def counts_to_ips(c, gr):
|
||||
return c * (gr or 10.0) / _GEO_FS_COUNTS
|
||||
|
||||
|
||||
def scan_one(path_str: str, default_trigger: float) -> dict | None:
|
||||
p = Path(path_str)
|
||||
try:
|
||||
gr, trig = 10.0, None
|
||||
ap = p.with_name(p.name.replace(".", "_", 1) + "_ASCII.TXT") \
|
||||
if False else p.parent / (p.stem + "_" + p.suffix.lstrip(".") + "_ASCII.TXT")
|
||||
if ap.exists():
|
||||
rep = parse_report(ap.read_text(errors="replace"))
|
||||
gr = rep.geo_range_ips or 10.0
|
||||
trig = rep.geo_trigger_level_ips
|
||||
ev = read_blastware_file(p)
|
||||
s = ev.raw_samples or {}
|
||||
if not all(s.get(c) for c in GEO):
|
||||
return None
|
||||
best = None
|
||||
for ch in GEO:
|
||||
arr = s[ch]
|
||||
n = len(arr)
|
||||
if n == 0:
|
||||
continue
|
||||
mean = sum(arr) / n
|
||||
peak = max(abs(v) for v in arr)
|
||||
if peak == 0:
|
||||
continue
|
||||
ratio = abs(mean) / peak
|
||||
if best is None or peak > best["peak_counts"]:
|
||||
best = {"channel": ch, "mean_counts": mean,
|
||||
"peak_counts": peak, "ratio": ratio}
|
||||
if best is None:
|
||||
return None
|
||||
ts = ev.timestamp
|
||||
return {
|
||||
"serial": serial_from_name(p.name) or "?",
|
||||
"timestamp": (f"{ts.year:04d}-{ts.month:02d}-{ts.day:02d}T"
|
||||
f"{ts.hour:02d}:{ts.minute:02d}:{ts.second:02d}") if ts else "",
|
||||
"filename": p.name,
|
||||
"channel": best["channel"],
|
||||
"offset_ips": round(counts_to_ips(best["mean_counts"], gr), 4),
|
||||
"peak_ips": round(counts_to_ips(best["peak_counts"], gr), 4),
|
||||
"mean_over_peak": round(best["ratio"], 3),
|
||||
"trigger_level_ips": trig if trig is not None else "",
|
||||
"geo_range_ips": gr,
|
||||
}
|
||||
except Exception:
|
||||
return None
|
||||
|
||||
|
||||
def main():
|
||||
ap = argparse.ArgumentParser()
|
||||
ap.add_argument("--dir", required=True)
|
||||
ap.add_argument("--jobs", type=int, default=4)
|
||||
ap.add_argument("--limit", type=int, default=0)
|
||||
ap.add_argument("--default-trigger", type=float, default=0.2)
|
||||
ap.add_argument("--out", required=True)
|
||||
a = ap.parse_args()
|
||||
|
||||
# The DL2 export keeps a byte-identical `Sent/` mirror of the root, so
|
||||
# enumerate paths but keep only the first occurrence of each basename —
|
||||
# otherwise every event is counted twice.
|
||||
seen = set()
|
||||
files = []
|
||||
for q in sorted(Path(a.dir).rglob("*")):
|
||||
if q.is_file() and _WAVE_RE.search(q.name) and q.name not in seen:
|
||||
seen.add(q.name)
|
||||
files.append(q)
|
||||
if a.limit:
|
||||
files = files[: a.limit]
|
||||
print(f"waveform binaries to scan: {len(files)}", flush=True)
|
||||
|
||||
rows = []
|
||||
with ProcessPoolExecutor(max_workers=a.jobs) as ex:
|
||||
futs = [ex.submit(scan_one, str(p), a.default_trigger) for p in files]
|
||||
for n, f in enumerate(as_completed(futs), 1):
|
||||
r = f.result()
|
||||
if r:
|
||||
rows.append(r)
|
||||
if n % 2000 == 0:
|
||||
print(f" {n}/{len(files)}", flush=True)
|
||||
|
||||
# learn per-serial trigger levels from the rows that had an ASCII
|
||||
by_serial = defaultdict(list)
|
||||
for r in rows:
|
||||
if r["trigger_level_ips"] != "":
|
||||
by_serial[r["serial"]].append(float(r["trigger_level_ips"]))
|
||||
med = {}
|
||||
for k, v in by_serial.items():
|
||||
v.sort()
|
||||
med[k] = v[len(v) // 2]
|
||||
|
||||
for r in rows:
|
||||
if r["trigger_level_ips"] == "":
|
||||
r["trigger_level_ips"] = med.get(r["serial"], a.default_trigger)
|
||||
r["suspect"] = int(
|
||||
r["mean_over_peak"] > MEAN_OVER_PEAK_MIN
|
||||
and abs(r["offset_ips"]) >= TRIGGER_FRACTION * float(r["trigger_level_ips"])
|
||||
)
|
||||
|
||||
cols = ["serial", "timestamp", "filename", "channel", "offset_ips", "peak_ips",
|
||||
"mean_over_peak", "trigger_level_ips", "geo_range_ips", "suspect"]
|
||||
with open(a.out, "w", newline="") as fh:
|
||||
w = csv.DictWriter(fh, fieldnames=cols)
|
||||
w.writeheader()
|
||||
w.writerows(rows)
|
||||
|
||||
sus = [r for r in rows if r["suspect"]]
|
||||
print(f"\nscanned {len(rows)} decodable waveforms")
|
||||
print(f"suspect events: {len(sus)}")
|
||||
per = defaultdict(int)
|
||||
for r in sus:
|
||||
per[r["serial"]] += 1
|
||||
print(f"units with >=1 suspect event: {len(per)} of {len({r['serial'] for r in rows})}")
|
||||
for s, n in sorted(per.items(), key=lambda x: -x[1])[:20]:
|
||||
print(f" {s:10} {n}")
|
||||
print(f"\nwrote {a.out}")
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
||||
@@ -0,0 +1,108 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Offset detector v2 — per-channel MEDIAN pedestal.
|
||||
|
||||
Supersedes the dominant-axis / mean detector in offset_scan.py, which had two
|
||||
flaws that manufactured false "recoveries":
|
||||
|
||||
1. It scored only the axis with the largest peak, so a real event on one axis
|
||||
hid a persistent pedestal on another. BE12599 2026-08-21 read "clean"
|
||||
because Long had a 1.065 in/s event, while Tran sat at +0.47 in/s.
|
||||
2. It used the MEAN, which a real transient perturbs. The median is the
|
||||
resting baseline: most samples sit at it, so a blast does not move it.
|
||||
Same event, Long: mean +0.0783 vs median -0.0050.
|
||||
|
||||
Flags a CHANNEL when |median| >= --floor in/s (default 0.025 = 5 A/D counts,
|
||||
Instantel's own criterion; 1 A/D count = 0.005 in/s).
|
||||
|
||||
Emits one row per (event, channel) so persistence can be tracked per channel.
|
||||
"""
|
||||
from __future__ import annotations
|
||||
import argparse, csv, re, statistics, sys
|
||||
from concurrent.futures import ProcessPoolExecutor, as_completed
|
||||
from pathlib import Path
|
||||
|
||||
sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
|
||||
from minimateplus.event_file_io import read_blastware_file
|
||||
|
||||
GEO = ("Tran", "Vert", "Long")
|
||||
K = 10.0 / 32000.0 # ADC counts -> in/s at the 10 in/s range
|
||||
_WAVE_RE = re.compile(r"\.[A-Za-z0-9]{2}0[Ww]$")
|
||||
_STEM_RE = re.compile(r"^([B-Z])(\d{3})")
|
||||
|
||||
|
||||
def serial_from_name(n):
|
||||
m = _STEM_RE.match(n)
|
||||
return f"BE{(ord(m.group(1))-ord('B'))*1000+int(m.group(2))}" if m else "?"
|
||||
|
||||
|
||||
def scan_one(ps):
|
||||
p = Path(ps)
|
||||
try:
|
||||
ev = read_blastware_file(p)
|
||||
s = ev.raw_samples or {}
|
||||
if not all(s.get(c) for c in GEO):
|
||||
return None
|
||||
ts = ev.timestamp
|
||||
stamp = (f"{ts.year:04d}-{ts.month:02d}-{ts.day:02d}T"
|
||||
f"{ts.hour:02d}:{ts.minute:02d}:{ts.second:02d}") if ts else ""
|
||||
out = []
|
||||
for ch in GEO:
|
||||
a = s[ch]
|
||||
out.append({
|
||||
"serial": serial_from_name(p.name), "timestamp": stamp,
|
||||
"filename": p.name, "channel": ch,
|
||||
"median_ips": round(statistics.median(a) * K, 4),
|
||||
"mean_ips": round(statistics.fmean(a) * K, 4),
|
||||
"peak_ips": round(max(abs(v) for v in a) * K, 4),
|
||||
})
|
||||
return out
|
||||
except Exception:
|
||||
return None
|
||||
|
||||
|
||||
def main():
|
||||
ap = argparse.ArgumentParser()
|
||||
ap.add_argument("--dir", required=True)
|
||||
ap.add_argument("--jobs", type=int, default=4)
|
||||
ap.add_argument("--floor", type=float, default=0.025)
|
||||
ap.add_argument("--out", required=True)
|
||||
a = ap.parse_args()
|
||||
|
||||
seen, files = set(), []
|
||||
for q in sorted(Path(a.dir).rglob("*")):
|
||||
if q.is_file() and _WAVE_RE.search(q.name) and q.name not in seen:
|
||||
seen.add(q.name); files.append(str(q))
|
||||
print(f"unique waveform binaries: {len(files)}", flush=True)
|
||||
|
||||
rows = []
|
||||
with ProcessPoolExecutor(max_workers=a.jobs) as ex:
|
||||
for n, f in enumerate(as_completed([ex.submit(scan_one, p) for p in files]), 1):
|
||||
r = f.result()
|
||||
if r: rows.extend(r)
|
||||
if n % 2000 == 0: print(f" {n}/{len(files)}", flush=True)
|
||||
|
||||
for r in rows:
|
||||
r["offset"] = int(abs(r["median_ips"]) >= a.floor)
|
||||
|
||||
cols = ["serial","timestamp","filename","channel","median_ips","mean_ips","peak_ips","offset"]
|
||||
with open(a.out, "w", newline="") as fh:
|
||||
w = csv.DictWriter(fh, fieldnames=cols); w.writeheader(); w.writerows(rows)
|
||||
|
||||
from collections import defaultdict
|
||||
ev_flagged = {(r["serial"], r["filename"]) for r in rows if r["offset"]}
|
||||
ev_all = {(r["serial"], r["filename"]) for r in rows}
|
||||
per = defaultdict(set)
|
||||
for r in rows:
|
||||
if r["offset"]: per[r["serial"]].add(r["filename"])
|
||||
tot = defaultdict(set)
|
||||
for r in rows: tot[r["serial"]].add(r["filename"])
|
||||
print(f"\nfloor = {a.floor} in/s ({a.floor/0.005:.0f} A/D counts)")
|
||||
print(f"events with >=1 offset channel: {len(ev_flagged)} of {len(ev_all)}")
|
||||
print(f"units affected: {len(per)} of {len(tot)}")
|
||||
for s in sorted(per, key=lambda s: -len(per[s])):
|
||||
print(f" {s:9} {len(per[s]):4} / {len(tot[s]):4} events")
|
||||
print(f"\nwrote {a.out}")
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
||||
@@ -0,0 +1,117 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Offset detector v3 — pre-trigger floor, with pre/mid/end consistency.
|
||||
|
||||
Brian's method, and better than v2's whole-record median for one reason: the
|
||||
pre-trigger window is *definitionally* quiet (it is the buffer captured before
|
||||
the trigger fired), whereas a whole-record median is merely robust to the event.
|
||||
|
||||
Per channel:
|
||||
pre = median of the first `pretrig_samples` samples (STRT record)
|
||||
mid = median of the middle third
|
||||
end = median of the final third
|
||||
spread = max(pre,mid,end) - min(pre,mid,end)
|
||||
|
||||
A DC offset is a *constant floor*: |pre| at or above the floor AND a small
|
||||
spread. A transient (settling, handling, a long-tailed event) moves one segment
|
||||
relative to the others and is rejected by the spread test.
|
||||
|
||||
Floor default 0.025 in/s = 5 A/D counts (Instantel's own criterion; 1 count =
|
||||
0.005 in/s). Quantisation is 0.005 in/s, so `spread` is measured in units of it.
|
||||
"""
|
||||
from __future__ import annotations
|
||||
import argparse, csv, re, statistics, sys
|
||||
from concurrent.futures import ProcessPoolExecutor, as_completed
|
||||
from pathlib import Path
|
||||
sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
|
||||
from minimateplus.event_file_io import read_blastware_file
|
||||
|
||||
GEO=("Tran","Vert","Long"); K=10.0/32000.0
|
||||
_WAVE=re.compile(r"\.[A-Za-z0-9]{2}0[Ww]$"); _STEM=re.compile(r"^([B-Z])(\d{3})")
|
||||
|
||||
_SERIAL_RE = re.compile(rb"\b([A-Z]{2}\d{3,6})\b")
|
||||
|
||||
|
||||
def serial_of(name: str, path=None) -> str:
|
||||
"""Real serial for a BW file.
|
||||
|
||||
The filename encodes only the NUMBER: `<letter><3 digits>` where
|
||||
letter = chr(ord('B') + serial // 1000). The two-letter family prefix
|
||||
("BE", "BA", ...) is **not** in the filename, so it must be read out of
|
||||
the file body. Four units in the DL2 archive are BA, not BE — assuming
|
||||
"BE" mislabels BA9229, BA10060, BA10895 and BA15957.
|
||||
"""
|
||||
m = _STEM.match(name)
|
||||
if not m:
|
||||
return "?"
|
||||
num = (ord(m.group(1)) - ord("B")) * 1000 + int(m.group(2))
|
||||
if path is not None:
|
||||
try:
|
||||
for s in _SERIAL_RE.findall(Path(path).read_bytes()):
|
||||
s = s.decode()
|
||||
if s[2:].lstrip("0") == str(num):
|
||||
return s
|
||||
except Exception:
|
||||
pass
|
||||
return f"BE{num}" # last-resort fallback; prefix unverified
|
||||
|
||||
def scan(ps):
|
||||
p=Path(ps)
|
||||
try:
|
||||
ev=read_blastware_file(p); s=ev.raw_samples or {}
|
||||
if not all(s.get(c) for c in GEO): return None
|
||||
pre_n=ev.pretrig_samples
|
||||
ts=ev.timestamp
|
||||
stamp=(f"{ts.year:04d}-{ts.month:02d}-{ts.day:02d}T"
|
||||
f"{ts.hour:02d}:{ts.minute:02d}:{ts.second:02d}") if ts else ""
|
||||
out=[]
|
||||
for ch in GEO:
|
||||
a=s[ch]; n=len(a); t=n//3
|
||||
pre = a[:pre_n] if (pre_n and 0 < pre_n < n) else a[:t]
|
||||
mid, end = a[t:2*t], a[2*t:]
|
||||
if not pre or not mid or not end: continue
|
||||
v=[statistics.median(x)*K for x in (pre,mid,end)]
|
||||
out.append({"serial":serial_of(p.name, p),"timestamp":stamp,
|
||||
"filename":p.name,"channel":ch,
|
||||
"pretrig_n": pre_n or 0,
|
||||
"pre":round(v[0],4),"mid":round(v[1],4),"end":round(v[2],4),
|
||||
"spread":round(max(v)-min(v),4),
|
||||
"peak":round(max(abs(x) for x in a)*K,4)})
|
||||
return out
|
||||
except Exception:
|
||||
return None
|
||||
|
||||
def main():
|
||||
ap=argparse.ArgumentParser()
|
||||
ap.add_argument("--dir",required=True); ap.add_argument("--jobs",type=int,default=4)
|
||||
ap.add_argument("--floor",type=float,default=0.025)
|
||||
ap.add_argument("--max-spread",type=float,default=0.02)
|
||||
ap.add_argument("--out",required=True)
|
||||
a=ap.parse_args()
|
||||
seen=set(); files=[]
|
||||
for q in sorted(Path(a.dir).rglob("*")):
|
||||
if q.is_file() and _WAVE.search(q.name) and q.name not in seen:
|
||||
seen.add(q.name); files.append(str(q))
|
||||
print(f"unique waveform binaries: {len(files)}",flush=True)
|
||||
rows=[]
|
||||
with ProcessPoolExecutor(max_workers=a.jobs) as ex:
|
||||
for i,f in enumerate(as_completed([ex.submit(scan,p) for p in files]),1):
|
||||
r=f.result()
|
||||
if r: rows.extend(r)
|
||||
if i%2000==0: print(f" {i}/{len(files)}",flush=True)
|
||||
for r in rows:
|
||||
r["offset"]=int(abs(r["pre"])>=a.floor and r["spread"]<=a.max_spread)
|
||||
cols=["serial","timestamp","filename","channel","pretrig_n","pre","mid","end","spread","peak","offset"]
|
||||
with open(a.out,"w",newline="") as fh:
|
||||
w=csv.DictWriter(fh,fieldnames=cols); w.writeheader(); w.writerows(rows)
|
||||
from collections import defaultdict
|
||||
per=defaultdict(set); tot=defaultdict(set)
|
||||
for r in rows:
|
||||
tot[r["serial"]].add(r["filename"])
|
||||
if r["offset"]: per[r["serial"]].add(r["filename"])
|
||||
print(f"\nfloor={a.floor} in/s ({a.floor/0.005:.0f} counts) max spread={a.max_spread}")
|
||||
print(f"units affected: {len(per)} of {len(tot)}")
|
||||
for s in sorted(per,key=lambda s:-len(per[s])):
|
||||
print(f" {s:9} {len(per[s]):4} / {len(tot[s]):4} events")
|
||||
print(f"\nwrote {a.out}")
|
||||
|
||||
if __name__=="__main__": main()
|
||||
@@ -0,0 +1,221 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Verify the series-3 decoder against preserved Blastware ASCII exports.
|
||||
|
||||
Pairs each `<stem>_<ext>_ASCII.TXT` with its binary `<stem>.<ext>`, decodes the
|
||||
binary with the production codec, and compares against BW's own export:
|
||||
|
||||
waveform — per-channel sample counts, then every sample value
|
||||
histogram — interval count, then every per-interval channel peak
|
||||
|
||||
ADC counts convert as ips = counts * geo_range_ips / 32000 (1 decoder unit =
|
||||
16 counts = 0.005 in/s at the 10 in/s range; see CLAUDE.md).
|
||||
|
||||
Usage:
|
||||
python scratch/verify_against_ascii.py --dir <path> [--limit N] [--jobs N]
|
||||
[--out results.json] [--kind w|h|all]
|
||||
"""
|
||||
from __future__ import annotations
|
||||
|
||||
import argparse, json, re, sys, traceback
|
||||
from concurrent.futures import ProcessPoolExecutor, as_completed
|
||||
from pathlib import Path
|
||||
|
||||
sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
|
||||
|
||||
from minimateplus.event_file_io import read_blastware_file
|
||||
from minimateplus.bw_ascii_report import parse_report_file, parse_report
|
||||
|
||||
GEO = ("Tran", "Vert", "Long")
|
||||
_GEO_FS_COUNTS = 32000.0
|
||||
_ASCII_SUFFIX_RE = re.compile(r"_ASCII\.TXT$", re.IGNORECASE)
|
||||
|
||||
|
||||
def binary_for(ascii_path: Path) -> Path:
|
||||
"""H907KXOW_WC0H_ASCII.TXT -> H907KXOW.WC0H"""
|
||||
stem = _ASCII_SUFFIX_RE.sub("", ascii_path.name)
|
||||
if "_" not in stem:
|
||||
return ascii_path.with_name(stem)
|
||||
head, _, ext = stem.rpartition("_")
|
||||
return ascii_path.with_name(f"{head}.{ext}")
|
||||
|
||||
|
||||
def counts_to_ips(counts, geo_range_ips):
|
||||
r = geo_range_ips if geo_range_ips else 10.0
|
||||
return counts * r / _GEO_FS_COUNTS
|
||||
|
||||
|
||||
def agrees(got, exp, geo_range_ips, tol=0.0006):
|
||||
"""True when decoded `got` matches BW's exported `exp`.
|
||||
|
||||
Saturation carve-out: when an event clips, BW clamps its export to the
|
||||
channel's range maximum (and writes OORANGE for the summary PPV), while
|
||||
the decoder faithfully reproduces raw counts that can sit a decoder unit
|
||||
or two past nominal full scale (32016 counts observed = 10.005 in/s on
|
||||
the 10 in/s range). Same sign and both at/above the ceiling is agreement,
|
||||
not a decode error.
|
||||
"""
|
||||
if abs(got - exp) <= tol:
|
||||
return True
|
||||
r = geo_range_ips if geo_range_ips else 10.0
|
||||
if abs(exp) >= r - tol and abs(got) >= r - tol and (got >= 0) == (exp >= 0):
|
||||
return True
|
||||
return False
|
||||
|
||||
|
||||
def parse_interval_table(text: str):
|
||||
"""Histogram interval rows: time, Tpk, Tfq, Vpk, Vfq, Lpk, Lfq, PVS, ..., micdB, micfq"""
|
||||
rows = []
|
||||
seen_header = False
|
||||
for line in text.splitlines():
|
||||
if "\t" not in line:
|
||||
continue
|
||||
cols = [c.strip().strip('"') for c in line.split("\t")]
|
||||
cols = [c for c in cols if c != ""]
|
||||
if not seen_header:
|
||||
if any(c in ("Tran", "Vert", "Long") for c in cols):
|
||||
seen_header = True
|
||||
continue
|
||||
if len(cols) < 7:
|
||||
continue
|
||||
if not re.match(r"^\d{1,2}:\d{2}:\d{2}$", cols[0]):
|
||||
continue
|
||||
def num(s):
|
||||
try:
|
||||
return float(s)
|
||||
except ValueError:
|
||||
return None
|
||||
rows.append({"time": cols[0], "Tran": num(cols[1]),
|
||||
"Vert": num(cols[3]), "Long": num(cols[5])})
|
||||
return rows
|
||||
|
||||
|
||||
def check_one(ascii_path_str: str) -> dict:
|
||||
ap = Path(ascii_path_str)
|
||||
bp = binary_for(ap)
|
||||
res = {"ascii": ap.name, "binary": bp.name, "status": "?",
|
||||
"kind": None, "detail": ""}
|
||||
try:
|
||||
if not bp.exists():
|
||||
res["status"] = "no_binary"
|
||||
return res
|
||||
text = ap.read_text(errors="replace")
|
||||
rep = parse_report(text, parse_samples=True)
|
||||
ev = read_blastware_file(bp)
|
||||
gr = rep.geo_range_ips
|
||||
res["kind"] = kind = ("histogram"
|
||||
if (rep.event_type or "").lower().startswith(("full histogram", "histogram"))
|
||||
else "waveform")
|
||||
samples = ev.raw_samples or {}
|
||||
dec_n = {c: len(samples.get(c) or []) for c in GEO}
|
||||
|
||||
if kind == "histogram":
|
||||
rows = parse_interval_table(text)
|
||||
res["n_ascii"] = len(rows)
|
||||
res["n_decoded"] = dec_n["Tran"]
|
||||
if not rows:
|
||||
res["status"] = "no_ascii_table"
|
||||
return res
|
||||
if dec_n["Tran"] == 0:
|
||||
res["status"] = "decode_empty"
|
||||
return res
|
||||
if dec_n["Tran"] != len(rows):
|
||||
res["status"] = "count_mismatch"
|
||||
res["detail"] = f"decoded {dec_n['Tran']} vs ascii {len(rows)}"
|
||||
return res
|
||||
bad = 0
|
||||
worst = 0.0
|
||||
for i, row in enumerate(rows):
|
||||
for ch in GEO:
|
||||
exp = row[ch]
|
||||
if exp is None:
|
||||
continue
|
||||
got = counts_to_ips(samples[ch][i], gr)
|
||||
if not agrees(got, exp, gr):
|
||||
bad += 1
|
||||
worst = max(worst, abs(got - exp))
|
||||
res["worst_abs"] = round(worst, 6)
|
||||
res["status"] = "exact" if bad == 0 else "value_mismatch"
|
||||
if bad:
|
||||
res["detail"] = f"{bad} interval-channel values off"
|
||||
return res
|
||||
|
||||
# waveform
|
||||
asc = rep.samples or []
|
||||
res["n_ascii"] = len(asc)
|
||||
res["n_decoded"] = dec_n["Tran"]
|
||||
if not asc:
|
||||
res["status"] = "no_ascii_table"
|
||||
return res
|
||||
if dec_n["Tran"] == 0:
|
||||
res["status"] = "decode_empty"
|
||||
return res
|
||||
if len({dec_n[c] for c in GEO}) != 1:
|
||||
res["status"] = "channel_len_mismatch"
|
||||
res["detail"] = str(dec_n)
|
||||
return res
|
||||
if dec_n["Tran"] != len(asc):
|
||||
res["status"] = "count_mismatch"
|
||||
res["detail"] = f"decoded {dec_n['Tran']} vs ascii {len(asc)}"
|
||||
return res
|
||||
bad = 0
|
||||
worst = 0.0
|
||||
for i, quad in enumerate(asc):
|
||||
for j, ch in enumerate(GEO):
|
||||
exp = quad[j]
|
||||
got = counts_to_ips(samples[ch][i], gr)
|
||||
if not agrees(got, exp, gr):
|
||||
bad += 1
|
||||
worst = max(worst, abs(got - exp))
|
||||
res["worst_abs"] = round(worst, 6)
|
||||
res["status"] = "exact" if bad == 0 else "value_mismatch"
|
||||
if bad:
|
||||
res["detail"] = f"{bad} sample values off"
|
||||
return res
|
||||
except Exception as e:
|
||||
res["status"] = "error"
|
||||
res["detail"] = f"{type(e).__name__}: {e}"
|
||||
return res
|
||||
|
||||
|
||||
def main():
|
||||
ap = argparse.ArgumentParser()
|
||||
ap.add_argument("--dir", required=True)
|
||||
ap.add_argument("--limit", type=int, default=0)
|
||||
ap.add_argument("--jobs", type=int, default=8)
|
||||
ap.add_argument("--kind", choices=["w", "h", "all"], default="all")
|
||||
ap.add_argument("--out", default=None)
|
||||
a = ap.parse_args()
|
||||
|
||||
root = Path(a.dir)
|
||||
files = sorted(p for p in root.rglob("*")
|
||||
if p.is_file() and p.name.upper().endswith("_ASCII.TXT"))
|
||||
if a.kind != "all":
|
||||
want = "0W" if a.kind == "w" else "0H"
|
||||
files = [p for p in files
|
||||
if _ASCII_SUFFIX_RE.sub("", p.name).upper().endswith(want)]
|
||||
if a.limit:
|
||||
files = files[: a.limit]
|
||||
print(f"pairs to check: {len(files)}", flush=True)
|
||||
|
||||
out = []
|
||||
from collections import Counter
|
||||
tally = Counter()
|
||||
with ProcessPoolExecutor(max_workers=a.jobs) as ex:
|
||||
futs = {ex.submit(check_one, str(p)): p for p in files}
|
||||
for n, f in enumerate(as_completed(futs), 1):
|
||||
r = f.result()
|
||||
out.append(r)
|
||||
tally[(r["kind"], r["status"])] += 1
|
||||
if n % 500 == 0:
|
||||
print(f" {n}/{len(files)}", flush=True)
|
||||
|
||||
print("\n=== results ===")
|
||||
for (kind, status), n in sorted(tally.items(), key=lambda x: -x[1]):
|
||||
print(f" {str(kind):10} {status:22} {n}")
|
||||
if a.out:
|
||||
Path(a.out).write_text(json.dumps(out, indent=1))
|
||||
print(f"\nwrote {a.out}")
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
||||
@@ -0,0 +1,228 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Verify the Thor / Micromate (series-4) IDF decoder against Thor's own exports.
|
||||
|
||||
Sister harness to ``scratch/verify_against_ascii.py`` (series-3 / Blastware).
|
||||
|
||||
Ground truth is the ``.IDFW.csv`` / ``.IDFH.csv`` file Thor writes next to each
|
||||
binary, under a sibling ``CSV/`` directory:
|
||||
|
||||
<dir>/UM13981_20220207084555.IDFW
|
||||
<dir>/CSV/UM13981_20220207084555.IDFW.csv
|
||||
|
||||
For waveforms the CSV carries a per-sample block of four columns
|
||||
(Tran, Vert, Long, Mic) in in/s and psi -- i.e. true per-sample ground truth,
|
||||
exactly what the BW ASCII exports give us for series-3. The leading 2-column
|
||||
rows are the report header (PPV, sample rate, geo range, ...).
|
||||
|
||||
Usage:
|
||||
python scratch/verify_thor_against_csv.py [--root DIR] [--lsb FLOAT]
|
||||
[--limit N] [--kind idfw|idfh|both]
|
||||
"""
|
||||
from __future__ import annotations
|
||||
|
||||
import argparse
|
||||
import csv
|
||||
import os
|
||||
import statistics
|
||||
import sys
|
||||
from collections import Counter, defaultdict
|
||||
|
||||
sys.path.insert(0, os.path.dirname(os.path.dirname(os.path.abspath(__file__))))
|
||||
|
||||
from micromate import idf_file as M
|
||||
|
||||
DEFAULT_ROOT = "/home/serversdown/thor-watcher/example-data"
|
||||
GEO = ("Tran", "Vert", "Long")
|
||||
|
||||
|
||||
def parse_export(path):
|
||||
"""Return (header_dict, sample_rows) from a Thor CSV export."""
|
||||
hdr, rows = {}, []
|
||||
with open(path, newline="", encoding="utf-8", errors="replace") as fh:
|
||||
for rec in csv.reader(fh):
|
||||
if len(rec) == 2:
|
||||
hdr[rec[0].strip()] = rec[1].strip()
|
||||
elif len(rec) >= 3:
|
||||
try:
|
||||
rows.append([float(x) for x in rec])
|
||||
except ValueError:
|
||||
pass
|
||||
return hdr, rows
|
||||
|
||||
|
||||
def index_corpus(root):
|
||||
"""Map BASENAME.IDFW -> (binary_path, csv_path) for every paired file."""
|
||||
exports, binaries = {}, {}
|
||||
for dirpath, _dirs, files in os.walk(root):
|
||||
for name in files:
|
||||
up = name.upper()
|
||||
full = os.path.join(dirpath, name)
|
||||
if up.endswith(".IDFW.CSV") or up.endswith(".IDFH.CSV"):
|
||||
exports.setdefault(name[:-4].upper(), full)
|
||||
elif up.endswith(".IDFW") or up.endswith(".IDFH"):
|
||||
binaries.setdefault(up, full)
|
||||
return {k: (binaries[k], exports[k]) for k in binaries.keys() & exports.keys()}
|
||||
|
||||
|
||||
def hdr_float(hdr, key):
|
||||
raw = hdr.get(key)
|
||||
if not raw:
|
||||
return None
|
||||
try:
|
||||
return float(raw.split()[0])
|
||||
except (ValueError, IndexError):
|
||||
return None
|
||||
|
||||
|
||||
def verify_waveform(binpath, csvpath, lsb):
|
||||
"""Compare one IDFW against its export. Returns a result dict."""
|
||||
out = {"file": os.path.basename(binpath), "status": "ok"}
|
||||
try:
|
||||
res = M.read_idf_file(binpath)
|
||||
except NotImplementedError:
|
||||
out["status"] = "not-thor"
|
||||
return out
|
||||
except Exception as exc: # noqa: BLE001 - harness reports, never raises
|
||||
out["status"] = "decode-error"
|
||||
out["detail"] = f"{type(exc).__name__}: {exc}"
|
||||
return out
|
||||
|
||||
hdr, rows = parse_export(csvpath)
|
||||
if not rows:
|
||||
out["status"] = "no-gt-samples"
|
||||
return out
|
||||
|
||||
gt = {ch: [r[i] for r in rows] for i, ch in enumerate(GEO)}
|
||||
out["gt_len"] = len(rows)
|
||||
out["geo_range"] = hdr.get("GeoRange")
|
||||
|
||||
exact = total = 0
|
||||
lens, chan_status = {}, {}
|
||||
ppv_err = {}
|
||||
for ch in GEO:
|
||||
arr = res.samples.get(ch, [])
|
||||
ref = gt[ch]
|
||||
lens[ch] = len(arr)
|
||||
if len(arr) != len(ref):
|
||||
chan_status[ch] = "length"
|
||||
continue
|
||||
if not arr:
|
||||
chan_status[ch] = "empty"
|
||||
continue
|
||||
hits = sum(1 for c, v in zip(arr, ref) if abs(c * lsb - v) < 5e-5)
|
||||
exact += hits
|
||||
total += len(arr)
|
||||
chan_status[ch] = "exact" if hits == len(arr) else "value"
|
||||
gp = hdr_float(hdr, f"{ch}PPV")
|
||||
if gp:
|
||||
ppv_err[ch] = (max(abs(c) for c in arr) * lsb - gp) / gp
|
||||
|
||||
out["lens"] = lens
|
||||
out["chan_status"] = chan_status
|
||||
out["exact"] = exact
|
||||
out["total"] = total
|
||||
out["ppv_err"] = ppv_err
|
||||
if all(v == "exact" for v in chan_status.values()):
|
||||
out["status"] = "exact"
|
||||
elif any(v == "length" for v in chan_status.values()):
|
||||
out["status"] = "length-mismatch"
|
||||
else:
|
||||
out["status"] = "value-mismatch"
|
||||
return out
|
||||
|
||||
|
||||
def verify_histogram(binpath, csvpath, lsb):
|
||||
out = {"file": os.path.basename(binpath), "status": "ok"}
|
||||
try:
|
||||
res = M.read_idf_file(binpath)
|
||||
except NotImplementedError:
|
||||
out["status"] = "not-thor"
|
||||
return out
|
||||
except Exception as exc: # noqa: BLE001
|
||||
out["status"] = "decode-error"
|
||||
out["detail"] = f"{type(exc).__name__}: {exc}"
|
||||
return out
|
||||
hdr, _rows = parse_export(csvpath)
|
||||
out["n_intervals"] = len(res.intervals or [])
|
||||
errs = {}
|
||||
for ch, attr in (("Tran", "transverse_ips"), ("Vert", "vertical_ips"),
|
||||
("Long", "longitudinal_ips")):
|
||||
gp = hdr_float(hdr, f"{ch}PPV")
|
||||
dv = getattr(res.event.peaks, attr, None)
|
||||
if gp and dv:
|
||||
errs[ch] = (dv - gp) / gp
|
||||
out["ppv_err"] = errs
|
||||
out["status"] = "peaks" if errs else "no-gt-peaks"
|
||||
return out
|
||||
|
||||
|
||||
def main():
|
||||
ap = argparse.ArgumentParser()
|
||||
ap.add_argument("--root", default=DEFAULT_ROOT)
|
||||
ap.add_argument("--lsb", type=float, default=M._GEO_LSB_IPS)
|
||||
ap.add_argument("--limit", type=int, default=0)
|
||||
ap.add_argument("--kind", choices=("idfw", "idfh", "both"), default="both")
|
||||
ap.add_argument("--show", type=int, default=15, help="worst-N detail rows")
|
||||
args = ap.parse_args()
|
||||
|
||||
pairs = index_corpus(args.root)
|
||||
keys = sorted(pairs)
|
||||
if args.kind != "both":
|
||||
keys = [k for k in keys if k.endswith(args.kind.upper())]
|
||||
if args.limit:
|
||||
keys = keys[: args.limit]
|
||||
|
||||
print(f"root: {args.root}")
|
||||
print(f"geo LSB under test: {args.lsb!r} in/s per count")
|
||||
print(f"paired files: {len(keys)}\n")
|
||||
|
||||
wf, hg = [], []
|
||||
for k in keys:
|
||||
binpath, csvpath = pairs[k]
|
||||
if k.endswith(".IDFW"):
|
||||
wf.append(verify_waveform(binpath, csvpath, args.lsb))
|
||||
else:
|
||||
hg.append(verify_histogram(binpath, csvpath, args.lsb))
|
||||
|
||||
if wf:
|
||||
st = Counter(r["status"] for r in wf)
|
||||
ex = sum(r.get("exact", 0) for r in wf)
|
||||
tot = sum(r.get("total", 0) for r in wf)
|
||||
print("=" * 68)
|
||||
print(f"WAVEFORM (IDFW): {len(wf)} files")
|
||||
for s, n in st.most_common():
|
||||
print(f" {s:16} {n:5d} ({100*n/len(wf):5.1f}%)")
|
||||
if tot:
|
||||
print(f" per-sample exact: {ex}/{tot} = {100*ex/tot:.3f}%")
|
||||
errs = [e for r in wf for e in r.get("ppv_err", {}).values()]
|
||||
if errs:
|
||||
print(f" PPV rel-error: median {statistics.median(errs):+.4%} "
|
||||
f"mean {statistics.mean(errs):+.4%} "
|
||||
f"max|.| {max(abs(e) for e in errs):.4%}")
|
||||
bad = [r for r in wf if r["status"] not in ("exact",)]
|
||||
if bad:
|
||||
print(f"\n worst {min(args.show, len(bad))} of {len(bad)} non-exact:")
|
||||
for r in bad[: args.show]:
|
||||
print(f" {r['file']:42} {r['status']:16} "
|
||||
f"lens={r.get('lens')} gt={r.get('gt_len')} "
|
||||
f"{r.get('detail','')}")
|
||||
|
||||
if hg:
|
||||
st = Counter(r["status"] for r in hg)
|
||||
print("=" * 68)
|
||||
print(f"HISTOGRAM (IDFH): {len(hg)} files")
|
||||
for s, n in st.most_common():
|
||||
print(f" {s:16} {n:5d} ({100*n/len(hg):5.1f}%)")
|
||||
errs = [e for r in hg for e in r.get("ppv_err", {}).values()]
|
||||
if errs:
|
||||
print(f" PPV rel-error: median {statistics.median(errs):+.4%} "
|
||||
f"mean {statistics.mean(errs):+.4%} "
|
||||
f"max|.| {max(abs(e) for e in errs):.4%}")
|
||||
within = lambda t: 100*sum(1 for e in errs if abs(e) <= t)/len(errs)
|
||||
print(f" within 0.5%: {within(0.005):.1f}% "
|
||||
f"within 2%: {within(0.02):.1f}% within 5%: {within(0.05):.1f}%")
|
||||
return 0
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
raise SystemExit(main())
|
||||
@@ -1,12 +1,12 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Backfill events.shape_* from each event's .h5 waveform samples. Idempotent."""
|
||||
"""Backfill events.shape_* and shape_offset_* from each event's .h5 samples. Idempotent."""
|
||||
from __future__ import annotations
|
||||
import argparse, logging, sys
|
||||
from pathlib import Path
|
||||
sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
|
||||
from sfm.database import SeismoDb
|
||||
from sfm.waveform_store import WaveformStore
|
||||
from sfm.shape_metrics import shape_from_h5
|
||||
from sfm.shape_metrics import shape_from_h5, offset_from_h5
|
||||
|
||||
log = logging.getLogger("backfill_event_shape")
|
||||
|
||||
@@ -21,6 +21,7 @@ def backfill_shape(db: SeismoDb, store: WaveformStore, *, dry_run: bool = False)
|
||||
if not h5_path.exists():
|
||||
counts["skipped_no_h5"] += 1; continue
|
||||
shape = shape_from_h5(h5_path)
|
||||
offset = offset_from_h5(h5_path)
|
||||
if shape is None:
|
||||
# The .h5 can no longer yield a shape (fewer than 2 samples, or a
|
||||
# flat trace). Clear any previously stored value rather than
|
||||
@@ -28,22 +29,32 @@ def backfill_shape(db: SeismoDb, store: WaveformStore, *, dry_run: bool = False)
|
||||
# from and silently feeds the false-trigger detector. Seen after
|
||||
# a decoder fix shrinks an event: 493 rows in the prod snapshot
|
||||
# were carrying metrics from a superseded decode (2026-08-25).
|
||||
if row.get("shape_crest_factor") is not None:
|
||||
if (row.get("shape_crest_factor") is not None
|
||||
or row.get("shape_offset") is not None):
|
||||
if not dry_run:
|
||||
with db._connect() as conn:
|
||||
conn.execute(
|
||||
"UPDATE events SET shape_crest_factor=NULL, "
|
||||
"shape_near_peak_count=NULL, shape_sample_count=NULL, "
|
||||
"shape_axis=NULL WHERE id=?", (row["id"],))
|
||||
"shape_axis=NULL, shape_offset=NULL, shape_offset_axis=NULL, "
|
||||
"shape_offset_pre=NULL, shape_offset_spread=NULL WHERE id=?",
|
||||
(row["id"],))
|
||||
counts["cleared_stale"] += 1
|
||||
counts["skipped_no_samples"] += 1; continue
|
||||
if not dry_run:
|
||||
with db._connect() as conn:
|
||||
conn.execute(
|
||||
"UPDATE events SET shape_crest_factor=?, shape_near_peak_count=?, "
|
||||
"shape_sample_count=?, shape_axis=? WHERE id=?",
|
||||
"shape_sample_count=?, shape_axis=?, shape_offset=?, "
|
||||
"shape_offset_axis=?, shape_offset_pre=?, shape_offset_spread=? "
|
||||
"WHERE id=?",
|
||||
(shape["crest_factor"], shape["near_peak_count"],
|
||||
shape["sample_count"], shape["axis"], row["id"]))
|
||||
shape["sample_count"], shape["axis"],
|
||||
(1 if offset["offset"] else 0) if offset else None,
|
||||
offset["axis"] if offset else None,
|
||||
offset["pre"] if offset else None,
|
||||
offset["spread"] if offset else None,
|
||||
row["id"]))
|
||||
counts["updated"] += 1
|
||||
log.info("backfill_shape: %s", counts)
|
||||
return counts
|
||||
|
||||
@@ -305,6 +305,11 @@ def main(argv=None) -> int:
|
||||
default=0,
|
||||
)
|
||||
ev.total_samples = ev.total_samples or n_samp
|
||||
# Sensor self-check traces from the IDFW fixed
|
||||
# header, so regenerated .h5 files gain the v2
|
||||
# /sensor_check group (mirrors save_imported_idf).
|
||||
from micromate.sensor_check import decode_idf_sensor_check
|
||||
ev.sensor_check = decode_idf_sensor_check(binary_bytes) or None
|
||||
|
||||
event_hdf5.write_event_hdf5(
|
||||
hdf5_path, ev,
|
||||
|
||||
@@ -54,6 +54,7 @@ from s3_analyzer import ( # noqa: E402
|
||||
write_claude_export,
|
||||
)
|
||||
from frame_db import FrameDB # noqa: E402
|
||||
from minimateplus.binary_annotate import annotate_blastware_binary # noqa: E402
|
||||
|
||||
# ── colour palette ────────────────────────────────────────────────────────────
|
||||
BG = "#1e1e1e"
|
||||
@@ -2675,6 +2676,95 @@ class DownloadPanel(tk.Frame):
|
||||
self._on_capture_ready(bw_path, s3_path, label)
|
||||
|
||||
|
||||
# ─────────────────────────────────────────────────────────────────────────────
|
||||
# Inspector panel — annotated hex view of a Series-3 binary
|
||||
# ─────────────────────────────────────────────────────────────────────────────
|
||||
|
||||
class InspectorPanel(tk.Frame):
|
||||
"""Load any Series-3 waveform binary and read it as an annotated hex dump.
|
||||
|
||||
Regions the decoder understands (header, STRT, per-channel sample records,
|
||||
footer) are labelled and colour-coded; everything the decoder cannot account
|
||||
for is flagged UNKNOWN, so undecoded bytes stand out for hand-inspection.
|
||||
"""
|
||||
|
||||
_KIND_COLOR = {
|
||||
"header": ACCENT,
|
||||
"strt": YELLOW,
|
||||
"sample": COL_S3,
|
||||
"footer": FG_DIM,
|
||||
"unknown": RED,
|
||||
}
|
||||
|
||||
def __init__(self, parent: tk.Widget, initialdir=None, **kw) -> None:
|
||||
super().__init__(parent, bg=BG, **kw)
|
||||
self._path = None
|
||||
self._initialdir = initialdir
|
||||
self._build()
|
||||
|
||||
def _build(self) -> None:
|
||||
bar = tk.Frame(self, bg=BG2)
|
||||
bar.pack(side=tk.TOP, fill=tk.X)
|
||||
tk.Button(bar, text="Open binary…", command=self._open, bg=BG3, fg=FG,
|
||||
relief=tk.FLAT, font=MONO, activebackground=ACCENT).pack(side=tk.LEFT, padx=6, pady=6)
|
||||
self._path_var = tk.StringVar(value="(no file loaded)")
|
||||
tk.Label(bar, textvariable=self._path_var, bg=BG2, fg=FG_DIM, font=MONO).pack(side=tk.LEFT, padx=6)
|
||||
self._summary_var = tk.StringVar(value="")
|
||||
tk.Label(bar, textvariable=self._summary_var, bg=BG2, fg=FG, font=MONO).pack(side=tk.RIGHT, padx=10)
|
||||
|
||||
legend = tk.Frame(self, bg=BG2)
|
||||
legend.pack(side=tk.TOP, fill=tk.X)
|
||||
tk.Label(legend, text="legend:", bg=BG2, fg=FG_DIM, font=MONO).pack(side=tk.LEFT, padx=(8, 2))
|
||||
for kind, color in self._KIND_COLOR.items():
|
||||
tk.Label(legend, text=f"■ {kind}", bg=BG2, fg=color, font=MONO).pack(side=tk.LEFT, padx=5, pady=2)
|
||||
|
||||
self._text = scrolledtext.ScrolledText(
|
||||
self, bg=BG, fg=FG, insertbackground=FG, font=MONO, wrap=tk.NONE, borderwidth=0)
|
||||
self._text.pack(side=tk.TOP, fill=tk.BOTH, expand=True)
|
||||
for kind, color in self._KIND_COLOR.items():
|
||||
self._text.tag_configure(kind, foreground=color)
|
||||
self._text.tag_configure("label", foreground="#ffffff", font=("Consolas", 9, "bold"))
|
||||
self._text.tag_configure("dim", foreground=FG_DIM)
|
||||
self._text.configure(state=tk.DISABLED)
|
||||
|
||||
def _open(self) -> None:
|
||||
p = filedialog.askopenfilename(title="Open a Series-3 binary", initialdir=self._initialdir)
|
||||
if p:
|
||||
self.load(Path(p))
|
||||
|
||||
def load(self, path: Path) -> None:
|
||||
try:
|
||||
raw = path.read_bytes()
|
||||
spans = annotate_blastware_binary(raw)
|
||||
except Exception as e: # noqa: BLE001 — surface any read/annotate failure to the user
|
||||
messagebox.showerror("Inspector", f"Failed to read/annotate:\n{path}\n\n{e}")
|
||||
return
|
||||
self._path = path
|
||||
self._path_var.set(str(path))
|
||||
self._render(raw, spans)
|
||||
|
||||
def _render(self, raw: bytes, spans) -> None:
|
||||
t = self._text
|
||||
t.configure(state=tk.NORMAL)
|
||||
t.delete("1.0", tk.END)
|
||||
unknown = sum(s.end - s.start for s in spans if s.kind == "unknown")
|
||||
pct = 100 * unknown / max(1, len(raw))
|
||||
self._summary_var.set(f"{len(raw)} B · {len(spans)} regions · {pct:.1f}% unknown")
|
||||
for s in spans:
|
||||
t.insert(tk.END, f"\n── {s.label} [0x{s.start:04x}:0x{s.end:04x}] {s.end - s.start} B ──\n", ("label",))
|
||||
self._insert_hex(t, raw, s.start, s.end, s.kind)
|
||||
t.configure(state=tk.DISABLED)
|
||||
|
||||
def _insert_hex(self, t: tk.Text, raw: bytes, start: int, end: int, kind: str) -> None:
|
||||
for off in range(start, end, 16):
|
||||
row = raw[off:min(off + 16, end)]
|
||||
hx = " ".join(f"{b:02x}" for b in row).ljust(16 * 3 - 1)
|
||||
txt = "".join(chr(b) if 32 <= b < 127 else "." for b in row)
|
||||
t.insert(tk.END, f" 0x{off:04x} ", ("dim",))
|
||||
t.insert(tk.END, hx, (kind,))
|
||||
t.insert(tk.END, f" {txt}\n", ("dim",))
|
||||
|
||||
|
||||
# ─────────────────────────────────────────────────────────────────────────────
|
||||
# Main application window
|
||||
# ─────────────────────────────────────────────────────────────────────────────
|
||||
@@ -2730,6 +2820,9 @@ class SeismoLab(tk.Tk):
|
||||
)
|
||||
nb.add(self._download_panel, text=" Download ")
|
||||
|
||||
self._inspector_panel = InspectorPanel(nb)
|
||||
nb.add(self._inspector_panel, text=" Inspector ")
|
||||
|
||||
self._nb = nb
|
||||
self.protocol("WM_DELETE_WINDOW", self._on_close)
|
||||
|
||||
|
||||
@@ -0,0 +1,133 @@
|
||||
"""USBM RI8507 / OSMRE blasting compliance chart.
|
||||
|
||||
Renders the velocity-vs-frequency compliance scatter Blastware draws on its Event
|
||||
Report: each channel's significant waveform cycles as ``(frequency, peak
|
||||
velocity)`` points on log-log axes against the regulatory limit curve(s). A point
|
||||
below the curve passes; above fails.
|
||||
|
||||
Two pieces, kept separate so both can be reused/extended:
|
||||
* ``limit_at`` / ``limit_curve`` — the regulatory limit curve(s), as data.
|
||||
* ``channel_compliance_points`` — the per-cycle (freq, velocity) scatter, by
|
||||
the zero-crossing method (matches Blastware: each channel's cloud tops out
|
||||
at that channel's PPV).
|
||||
|
||||
Limit curves (USBM RI8507 Figure B-1 / OSM 30 CFR 816.67), drawn CONTINUOUS — a
|
||||
constant-displacement bound (sloped, ``v = 2πf·d``) meets a constant-velocity
|
||||
plateau at the frequency where they're equal, so there are no vertical steps
|
||||
(matching how Blastware draws it). Two lines:
|
||||
* **Drywall** (modern gypsum board) — 0.75 in/s plateau (solid).
|
||||
* **Plaster** on wood lath (older homes) — 0.50 in/s plateau (dashed).
|
||||
Both use a 0.030 in low-frequency displacement bound and rise through a 0.010 in
|
||||
displacement bound to a 2.0 in/s high-frequency plateau. Values from USBM RI8507
|
||||
(Appendix B) / 30 CFR 816.67; ⚠ confirm the exact shape against a Blastware
|
||||
report before trusting for compliance.
|
||||
"""
|
||||
from __future__ import annotations
|
||||
|
||||
import math
|
||||
from typing import Dict, Sequence, Tuple
|
||||
|
||||
import numpy as np
|
||||
from matplotlib.ticker import FixedLocator, NullLocator
|
||||
|
||||
# curve name → (low-freq "ultimate" displacement in, mid velocity plateau in/s,
|
||||
# high-freq displacement in, high-freq velocity plateau in/s).
|
||||
# RI8507 Fig B-1 (p.74): ultimate max displacement 0.030 in (< ~4 Hz), plateau
|
||||
# 0.75 (Drywall) / 0.50 (plaster), rising diagonal at 0.008 in displacement up to
|
||||
# a 2.0 in/s plateau reached at ~40 Hz.
|
||||
_CURVES: Dict[str, Tuple[float, float, float, float]] = {
|
||||
"Drywall": (0.030, 0.75, 0.008, 2.00),
|
||||
"Plaster": (0.030, 0.50, 0.008, 2.00),
|
||||
}
|
||||
# how each curve is stroked on the chart
|
||||
_CURVE_STYLE = {"Drywall": {"ls": "-", "lw": 1.0}, "Plaster": {"ls": "--", "lw": 0.9}}
|
||||
|
||||
STANDARDS = tuple(_CURVES)
|
||||
|
||||
# Blastware's channel markers/colours on the compliance chart.
|
||||
_CHANNEL_STYLE = {
|
||||
"Tran": ("+", "#d62728"), # red +
|
||||
"Vert": ("x", "#2ca02c"), # green x
|
||||
"Long": ("o", "#1f77b4"), # blue o
|
||||
}
|
||||
|
||||
|
||||
def limit_at(freq_hz: float, curve: str = "Drywall") -> float:
|
||||
"""Max allowed PPV (in/s) at ``freq_hz`` for ``curve`` (continuous)."""
|
||||
d_low, v_mid, d_high, v_high = _CURVES[curve]
|
||||
f = max(freq_hz, 1.0)
|
||||
f_a = v_mid / (2.0 * math.pi * d_low) # disp_low → vel_mid
|
||||
f_b = v_mid / (2.0 * math.pi * d_high) # vel_mid → disp_high
|
||||
f_c = v_high / (2.0 * math.pi * d_high) # disp_high → vel_high
|
||||
if f <= f_a:
|
||||
return 2.0 * math.pi * f * d_low
|
||||
if f <= f_b:
|
||||
return v_mid
|
||||
if f <= f_c:
|
||||
return 2.0 * math.pi * f * d_high
|
||||
return v_high
|
||||
|
||||
|
||||
def limit_curve(curve: str = "Drywall", fmin: float = 1.0, fmax: float = 100.0, n: int = 400):
|
||||
"""(freqs, limits) sampled across the band for plotting one curve."""
|
||||
freqs = np.logspace(np.log10(fmin), np.log10(fmax), n)
|
||||
return freqs, np.array([limit_at(f, curve) for f in freqs])
|
||||
|
||||
|
||||
def channel_compliance_points(
|
||||
samples: Sequence[float], sps: float, fmin: float = 1.0, fmax: float = 100.0,
|
||||
vmin: float = 0.0,
|
||||
) -> Tuple[np.ndarray, np.ndarray]:
|
||||
"""Per-cycle (frequency, peak velocity) scatter for one channel.
|
||||
|
||||
Zero-crossing method: split the trace at sign changes; each half-cycle
|
||||
contributes one point at ``(1/(2·half_period), max|amplitude|)``. Matches
|
||||
Blastware — the cloud's ceiling is the channel PPV. ``samples`` must be in the
|
||||
velocity unit you want plotted (in/s). Points outside ``[fmin, fmax]`` or at
|
||||
or below ``vmin`` are dropped.
|
||||
"""
|
||||
x = np.asarray(samples, dtype=float)
|
||||
if x.size < 3:
|
||||
return np.empty(0), np.empty(0)
|
||||
zc = np.where(np.diff(np.signbit(x)))[0]
|
||||
freqs, vels = [], []
|
||||
for a, b in zip(zc[:-1], zc[1:]):
|
||||
half_period = (b - a) / sps
|
||||
if half_period <= 0:
|
||||
continue
|
||||
freqs.append(1.0 / (2.0 * half_period))
|
||||
vels.append(float(np.abs(x[a:b + 1]).max()))
|
||||
f = np.array(freqs)
|
||||
v = np.array(vels)
|
||||
keep = (f >= fmin) & (f <= fmax) & (v > vmin)
|
||||
return f[keep], v[keep]
|
||||
|
||||
|
||||
def draw_compliance_chart(ax, channels: Dict[str, Sequence[float]], sps: float) -> None:
|
||||
"""Draw the compliance chart (both limit curves + per-channel scatter)."""
|
||||
for name, style in _CURVE_STYLE.items():
|
||||
cf, cv = limit_curve(name)
|
||||
ax.plot(cf, cv, color="#333", zorder=3, **style)
|
||||
|
||||
for ch, (marker, color) in _CHANNEL_STYLE.items():
|
||||
samples = channels.get(ch)
|
||||
if samples is None or len(samples) == 0:
|
||||
continue
|
||||
f, v = channel_compliance_points(samples, sps)
|
||||
ax.scatter(f, v, marker=marker, s=12, c=color, linewidths=0.7, zorder=4, label=ch)
|
||||
|
||||
ax.set_xscale("log")
|
||||
ax.set_yscale("log")
|
||||
ax.set_xlim(1, 100)
|
||||
ax.set_ylim(0.0394, 10)
|
||||
ax.set_box_aspect(1) # square plot box (log-log compliance charts are square)
|
||||
xt = [1, 2, 5, 10, 20, 50, 100]
|
||||
yt = [0.0394, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10]
|
||||
ax.xaxis.set_major_locator(FixedLocator(xt)); ax.xaxis.set_minor_locator(NullLocator())
|
||||
ax.yaxis.set_major_locator(FixedLocator(yt)); ax.yaxis.set_minor_locator(NullLocator())
|
||||
ax.set_xticklabels([str(v) for v in xt])
|
||||
ax.set_yticklabels([("%g" % v) for v in yt])
|
||||
ax.set_xlabel("Frequency (Hz)", fontsize=7)
|
||||
ax.set_ylabel("Velocity (in/s)", fontsize=7)
|
||||
ax.tick_params(labelsize=6)
|
||||
ax.grid(True, which="both", ls=":", lw=0.4, color="#ccc")
|
||||
+130
-42
@@ -82,6 +82,7 @@ CREATE TABLE IF NOT EXISTS events (
|
||||
record_type TEXT, -- "single_shot" | "continuous"
|
||||
false_trigger INTEGER NOT NULL DEFAULT 0, -- 0=no, 1=yes (manual flag)
|
||||
reviewed_real INTEGER NOT NULL DEFAULT 0, -- 0=no, 1=operator-confirmed real (mutually exclusive with false_trigger)
|
||||
false_trigger_reason TEXT, -- optional FT cause ("offset", ...); NULL = none. Only meaningful when false_trigger=1.
|
||||
blastware_filename TEXT, -- event file within waveform store; extension is per-event (AB0T encodes timestamp)
|
||||
blastware_filesize INTEGER, -- bytes; NULL if no event file saved
|
||||
a5_pickle_filename TEXT, -- "<filename>.a5.pkl" sidecar
|
||||
@@ -99,6 +100,10 @@ CREATE TABLE IF NOT EXISTS events (
|
||||
shape_near_peak_count INTEGER, -- samples >= 0.5 * peak (FT: few; real: many)
|
||||
shape_sample_count INTEGER, -- total samples (to normalize near_peak_count)
|
||||
shape_axis TEXT, -- geophone channel measured ("Tran"/"Vert"/"Long")
|
||||
shape_offset INTEGER, -- 1 = DC-offset false trigger (pre-trigger baseline off zero + flat). Meaningful for waveforms only.
|
||||
shape_offset_axis TEXT, -- geo channel the offset was measured on
|
||||
shape_offset_pre REAL, -- pre-trigger baseline median (in/s)
|
||||
shape_offset_spread REAL, -- max(pre,mid,end) - min(...) in in/s; small = constant/DC
|
||||
created_at TEXT NOT NULL DEFAULT (strftime('%Y-%m-%dT%H:%M:%SZ', 'now')),
|
||||
UNIQUE(serial, timestamp)
|
||||
);
|
||||
@@ -225,7 +230,12 @@ class SeismoDb:
|
||||
("shape_near_peak_count", "INTEGER"),
|
||||
("shape_sample_count", "INTEGER"),
|
||||
("shape_axis", "TEXT"),
|
||||
("shape_offset", "INTEGER"),
|
||||
("shape_offset_axis", "TEXT"),
|
||||
("shape_offset_pre", "REAL"),
|
||||
("shape_offset_spread", "REAL"),
|
||||
("reviewed_real", "INTEGER NOT NULL DEFAULT 0"),
|
||||
("false_trigger_reason", "TEXT"),
|
||||
):
|
||||
if col not in existing_cols:
|
||||
log.info("_migrate: events ADD COLUMN %s %s", col, ddl)
|
||||
@@ -430,9 +440,11 @@ class SeismoDb:
|
||||
tran_zc_above_range, vert_zc_above_range,
|
||||
long_zc_above_range, mic_zc_above_range,
|
||||
shape_crest_factor, shape_near_peak_count,
|
||||
shape_sample_count, shape_axis)
|
||||
shape_sample_count, shape_axis,
|
||||
shape_offset, shape_offset_axis,
|
||||
shape_offset_pre, shape_offset_spread)
|
||||
VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?,
|
||||
?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
|
||||
?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
|
||||
""",
|
||||
(
|
||||
self._new_id(), serial, key, session_id, ts,
|
||||
@@ -464,6 +476,10 @@ class SeismoDb:
|
||||
rec.get("shape_near_peak_count"),
|
||||
rec.get("shape_sample_count"),
|
||||
rec.get("shape_axis"),
|
||||
rec.get("shape_offset"),
|
||||
rec.get("shape_offset_axis"),
|
||||
rec.get("shape_offset_pre"),
|
||||
rec.get("shape_offset_spread"),
|
||||
),
|
||||
)
|
||||
inserted += 1
|
||||
@@ -517,7 +533,11 @@ class SeismoDb:
|
||||
shape_crest_factor = COALESCE(?, shape_crest_factor),
|
||||
shape_near_peak_count = COALESCE(?, shape_near_peak_count),
|
||||
shape_sample_count = COALESCE(?, shape_sample_count),
|
||||
shape_axis = COALESCE(?, shape_axis)
|
||||
shape_axis = COALESCE(?, shape_axis),
|
||||
shape_offset = COALESCE(?, shape_offset),
|
||||
shape_offset_axis = COALESCE(?, shape_offset_axis),
|
||||
shape_offset_pre = COALESCE(?, shape_offset_pre),
|
||||
shape_offset_spread = COALESCE(?, shape_offset_spread)
|
||||
WHERE serial = ? AND timestamp = ?
|
||||
""",
|
||||
(
|
||||
@@ -549,6 +569,10 @@ class SeismoDb:
|
||||
rec.get("shape_near_peak_count") if rec else None,
|
||||
rec.get("shape_sample_count") if rec else None,
|
||||
rec.get("shape_axis") if rec else None,
|
||||
rec.get("shape_offset") if rec else None,
|
||||
rec.get("shape_offset_axis") if rec else None,
|
||||
rec.get("shape_offset_pre") if rec else None,
|
||||
rec.get("shape_offset_spread") if rec else None,
|
||||
serial,
|
||||
ts,
|
||||
),
|
||||
@@ -603,61 +627,116 @@ class SeismoDb:
|
||||
).fetchall()
|
||||
return [dict(r) for r in rows]
|
||||
|
||||
def find_twins(self, event_id: str, *, window_seconds: int = 300) -> list[dict]:
|
||||
def find_twins(self, event_id: str, *, window_seconds: int | None = None) -> list[dict]:
|
||||
"""
|
||||
Find this event's histogram/waveform twin(s): rows sharing the same
|
||||
serial and an identical peak_vector_sum, whose timestamp falls
|
||||
within ``window_seconds`` of this event's timestamp. Excludes the
|
||||
event itself. Returns [] if the event or any required field
|
||||
(serial / peak_vector_sum / timestamp) is missing.
|
||||
Find this event's histogram/waveform twin(s): the SAME physical event
|
||||
recorded both as a scheduled histogram and as a triggered waveform.
|
||||
|
||||
Caveat: identical-PVS matching is a proxy for "same physical event
|
||||
recorded twice," not a guarantee. In the rare case where the device
|
||||
clamps/saturates PVS (clamped to sqrt(3) * geo_range), two distinct
|
||||
saturated events on the same serial within the window can share the
|
||||
same clamped PVS value and be matched as twins even though they are
|
||||
different events. This is harmless in practice — false_trigger/
|
||||
reviewed_real are derived/index columns re-derivable from the
|
||||
sidecar source of truth — but worth knowing if twin counts look
|
||||
surprising on a saturated/clamped run.
|
||||
A real trigger is captured twice — once as a triggered waveform (stamped
|
||||
at the trigger instant) and once inside the scheduled histogram whose
|
||||
interval contains it (stamped at the histogram's interval start, e.g. the
|
||||
7am/7pm call-in). The two can be HOURS apart in time yet report the same
|
||||
serial and identical peak_vector_sum. Twins are therefore matched by:
|
||||
|
||||
* same serial,
|
||||
* identical peak_vector_sum,
|
||||
* OPPOSITE record type (one histogram, one waveform), and
|
||||
* the waveform's timestamp falls within the histogram's interval —
|
||||
from a histogram's timestamp up to the next histogram (same serial).
|
||||
|
||||
This replaces the old ±``window_seconds`` heuristic, which silently
|
||||
missed twins more than a few minutes apart (a histogram's interval-start
|
||||
stamp and the trigger instant routinely differ by hours). ``window_seconds``
|
||||
is still accepted for backward compatibility but is ignored.
|
||||
|
||||
Returns [] if the event or a required field (serial / peak_vector_sum /
|
||||
timestamp) is missing.
|
||||
|
||||
Caveat: identical-PVS matching remains a proxy for "same physical event"
|
||||
— if the device clamps/saturates PVS (to sqrt(3) * geo_range), two
|
||||
distinct saturated events could share a PVS. The added opposite-type and
|
||||
interval constraints make a false pairing far less likely than the old
|
||||
time-window match, and false_trigger/reviewed_real stay re-derivable from
|
||||
the sidecar source of truth.
|
||||
"""
|
||||
def _parse(ts):
|
||||
if not ts:
|
||||
return None
|
||||
try:
|
||||
return datetime.datetime.fromisoformat(str(ts).replace(" ", "T"))
|
||||
except ValueError:
|
||||
return None
|
||||
|
||||
def _is_hist(rt):
|
||||
return str(rt or "").lower().startswith("hist")
|
||||
|
||||
row = self.get_event(event_id)
|
||||
if not row:
|
||||
return []
|
||||
serial = row.get("serial"); pvs = row.get("peak_vector_sum"); ts = row.get("timestamp")
|
||||
if serial is None or pvs is None or not ts:
|
||||
serial = row.get("serial"); pvs = row.get("peak_vector_sum")
|
||||
t_target = _parse(row.get("timestamp"))
|
||||
if serial is None or pvs is None or t_target is None:
|
||||
return []
|
||||
try:
|
||||
t = datetime.datetime.fromisoformat(ts.replace(" ", "T"))
|
||||
except ValueError:
|
||||
return []
|
||||
lo = (t - datetime.timedelta(seconds=window_seconds)).isoformat()
|
||||
hi = (t + datetime.timedelta(seconds=window_seconds)).isoformat()
|
||||
with self._connect() as conn:
|
||||
rows = conn.execute(
|
||||
"SELECT * FROM events WHERE serial=? AND id!=? AND peak_vector_sum=? "
|
||||
"AND timestamp BETWEEN ? AND ?",
|
||||
(serial, event_id, pvs, lo, hi),
|
||||
).fetchall()
|
||||
return [dict(r) for r in rows]
|
||||
target_hist = _is_hist(row.get("record_type"))
|
||||
|
||||
def propagate_review_to_twins(self, event_id: str, *, window_seconds: int = 300) -> list[str]:
|
||||
with self._connect() as conn:
|
||||
cand_rows = [dict(r) for r in conn.execute(
|
||||
"SELECT * FROM events WHERE serial=? AND id!=? AND peak_vector_sum=?",
|
||||
(serial, event_id, pvs)).fetchall()]
|
||||
hist_ts = [r["timestamp"] for r in conn.execute(
|
||||
"SELECT timestamp FROM events WHERE serial=? AND lower(record_type) LIKE 'hist%'",
|
||||
(serial,)).fetchall()]
|
||||
|
||||
# Histogram interval-start times for this serial, sorted, to bound intervals.
|
||||
starts = sorted(x for x in (_parse(t) for t in hist_ts) if x is not None)
|
||||
|
||||
def _interval_end(h_start):
|
||||
# The next histogram strictly after h_start bounds the interval; else open-ended.
|
||||
for x in starts:
|
||||
if x > h_start:
|
||||
return x
|
||||
return None
|
||||
|
||||
def _covers(h_start, w_time):
|
||||
end = _interval_end(h_start)
|
||||
return h_start <= w_time and (end is None or w_time < end)
|
||||
|
||||
twins = []
|
||||
for c in cand_rows:
|
||||
if _is_hist(c.get("record_type")) == target_hist:
|
||||
continue # twins are strictly cross-type (one histogram, one waveform)
|
||||
c_time = _parse(c.get("timestamp"))
|
||||
if c_time is None:
|
||||
continue
|
||||
h_start, w_time = (t_target, c_time) if target_hist else (c_time, t_target)
|
||||
if _covers(h_start, w_time):
|
||||
twins.append(c)
|
||||
return twins
|
||||
|
||||
def propagate_review_to_twins(self, event_id: str, *, window_seconds: int | None = None) -> list[str]:
|
||||
"""
|
||||
Copy this event's `false_trigger`/`reviewed_real` columns onto each
|
||||
of its histogram/waveform twins (see `find_twins`), so flagging one
|
||||
twin flags both. Returns the list of twin ids updated.
|
||||
Copy this event's `false_trigger`/`reviewed_real`/`false_trigger_reason`
|
||||
columns onto each of its histogram/waveform twins (see `find_twins`), so
|
||||
flagging one twin flags both. Returns the list of twin ids updated.
|
||||
|
||||
``window_seconds`` is accepted for backward compatibility but ignored;
|
||||
twin matching is now interval-based (see `find_twins`).
|
||||
"""
|
||||
row = self.get_event(event_id)
|
||||
if not row:
|
||||
return []
|
||||
ft = 1 if row.get("false_trigger") else 0
|
||||
real = 1 if row.get("reviewed_real") else 0
|
||||
twins = self.find_twins(event_id, window_seconds=window_seconds)
|
||||
# The reason is a subtype of the FT flag — carry it only when the source
|
||||
# is actually a false trigger, so a confirmed-real twin never keeps one.
|
||||
reason = row.get("false_trigger_reason") if ft else None
|
||||
twins = self.find_twins(event_id)
|
||||
moved = []
|
||||
with self._connect() as conn:
|
||||
for tw in twins:
|
||||
conn.execute("UPDATE events SET false_trigger=?, reviewed_real=? WHERE id=?",
|
||||
(ft, real, tw["id"]))
|
||||
conn.execute(
|
||||
"UPDATE events SET false_trigger=?, reviewed_real=?, false_trigger_reason=? WHERE id=?",
|
||||
(ft, real, reason, tw["id"]))
|
||||
moved.append(tw["id"])
|
||||
return moved
|
||||
|
||||
@@ -678,7 +757,7 @@ class SeismoDb:
|
||||
)
|
||||
else:
|
||||
cur = conn.execute(
|
||||
"UPDATE events SET false_trigger=0 WHERE id=?",
|
||||
"UPDATE events SET false_trigger=0, false_trigger_reason=NULL WHERE id=?",
|
||||
(event_id,),
|
||||
)
|
||||
return cur.rowcount > 0
|
||||
@@ -772,7 +851,8 @@ class SeismoDb:
|
||||
return False
|
||||
has_ft = "false_trigger" in review
|
||||
has_real = "reviewed_real" in review
|
||||
if not has_ft and not has_real:
|
||||
has_reason = "false_trigger_reason" in review
|
||||
if not has_ft and not has_real and not has_reason:
|
||||
# Nothing derived to update; just confirm the row exists.
|
||||
with self._connect() as conn:
|
||||
row = conn.execute(
|
||||
@@ -785,11 +865,19 @@ class SeismoDb:
|
||||
sets["false_trigger"] = 1 if review.get("false_trigger") else 0
|
||||
if has_real:
|
||||
sets["reviewed_real"] = 1 if review.get("reviewed_real") else 0
|
||||
if has_reason:
|
||||
reason = review.get("false_trigger_reason") or None
|
||||
sets["false_trigger_reason"] = reason
|
||||
if reason: # a reason is a subtype of FT → implies FT
|
||||
sets["false_trigger"] = 1
|
||||
# mutual exclusivity: a true in one forces the other column to 0
|
||||
if sets.get("false_trigger") == 1:
|
||||
sets["reviewed_real"] = 0
|
||||
if sets.get("reviewed_real") == 1:
|
||||
sets["false_trigger"] = 0
|
||||
# the reason is only meaningful while flagged FT — clear it if FT ends up 0
|
||||
if sets.get("false_trigger") == 0:
|
||||
sets["false_trigger_reason"] = None
|
||||
assign = ", ".join(f"{k}=?" for k in sets)
|
||||
params = list(sets.values()) + [event_id]
|
||||
with self._connect() as conn:
|
||||
|
||||
+44
-4
@@ -12,8 +12,11 @@ Layout written to `<filename>.h5`:
|
||||
├─ samples_int16/ (optional)
|
||||
│ ├─ Tran (int16, raw ADC counts) shape: (N,)
|
||||
│ └─ ... per channel (only when present in the source)
|
||||
├─ sensor_check/ (optional, schema v2+)
|
||||
│ ├─ Tran (int32, raw counts) shape: (M,) M ≪ N
|
||||
│ └─ ... per channel present in the source (MicL absent on 3-channel units)
|
||||
└─ root attrs (event metadata):
|
||||
schema_version int = 1
|
||||
schema_version int = 2
|
||||
kind str = "sfm.event.hdf5"
|
||||
serial str
|
||||
waveform_key str (8-hex)
|
||||
@@ -64,7 +67,7 @@ from minimateplus.models import Event
|
||||
|
||||
log = logging.getLogger(__name__)
|
||||
|
||||
SCHEMA_VERSION = 1
|
||||
SCHEMA_VERSION = 2 # v2 adds the optional /sensor_check group
|
||||
HDF5_KIND = "sfm.event.hdf5"
|
||||
|
||||
# Geophone full-scale velocity per range (in/s). Confirmed in CLAUDE.md
|
||||
@@ -270,6 +273,22 @@ def write_event_hdf5(
|
||||
)
|
||||
igrp.attrs["mic_psi_per_count"] = float(mic_factor)
|
||||
|
||||
# /sensor_check — optional short diagnostic self-check traces (schema
|
||||
# v2+). Raw ADC counts (a shape diagnostic; the per-series count scale
|
||||
# differs, and the renderer fits each trace to its box). Only channels
|
||||
# the decoder found are written — 3-channel units carry no MicL.
|
||||
sc = event.sensor_check or {}
|
||||
if sc:
|
||||
scgrp = f.create_group("sensor_check")
|
||||
for ch in ("Tran", "Vert", "Long", "MicL"):
|
||||
vals = sc.get(ch)
|
||||
if vals:
|
||||
scgrp.create_dataset(
|
||||
ch, data=np.asarray(vals, dtype=np.int32),
|
||||
compression="gzip", compression_opts=4, shuffle=True,
|
||||
)
|
||||
scgrp.attrs["units"] = "raw_counts"
|
||||
|
||||
import os
|
||||
os.replace(tmp, path)
|
||||
|
||||
@@ -334,6 +353,16 @@ def read_event_hdf5(path: Union[str, Path]) -> dict:
|
||||
if mic_attr is not None:
|
||||
mic_psi = float(mic_attr)
|
||||
|
||||
# /sensor_check — optional (schema v2+); absent on older files.
|
||||
sensor_check = None
|
||||
scgrp = f.get("sensor_check")
|
||||
if scgrp is not None:
|
||||
sensor_check = {}
|
||||
for ch in ("Tran", "Vert", "Long", "MicL"):
|
||||
ds = scgrp.get(ch)
|
||||
if ds is not None:
|
||||
sensor_check[ch] = np.asarray(ds[()])
|
||||
|
||||
return {
|
||||
"schema_version": sv,
|
||||
"kind": attrs.get("kind"),
|
||||
@@ -341,6 +370,7 @@ def read_event_hdf5(path: Union[str, Path]) -> dict:
|
||||
"samples": samples,
|
||||
"samples_int16": samples_int16,
|
||||
"mic_psi_per_count": mic_psi,
|
||||
"sensor_check": sensor_check,
|
||||
}
|
||||
|
||||
|
||||
@@ -431,11 +461,16 @@ def plot_json_from_hdf5(
|
||||
event_id: Optional[str] = None,
|
||||
index: Optional[int] = None,
|
||||
) -> dict:
|
||||
"""Build a `sfm.plot.v1` JSON dict from a stored .h5 file."""
|
||||
"""Build a `sfm.plot.v1` JSON dict from a stored .h5 file.
|
||||
|
||||
The dict also carries a top-level ``sensor_check`` key (the raw self-check
|
||||
traces as ``{ch: [int]}``, or None) beyond the plot schema, so report
|
||||
generation can read the traces from the same single .h5 load.
|
||||
"""
|
||||
data = read_event_hdf5(path)
|
||||
a = data["attrs"]
|
||||
s = data["samples"]
|
||||
return _build_plot_dict(
|
||||
out = _build_plot_dict(
|
||||
n_samples=len(s["Tran"]) if "Tran" in s else 0,
|
||||
sample_rate=int(a.get("sample_rate", 1024) or 1024),
|
||||
pretrig_samples=int(a.get("pretrig_samples", 0) or 0),
|
||||
@@ -463,6 +498,11 @@ def plot_json_from_hdf5(
|
||||
event_id=event_id,
|
||||
index=index,
|
||||
)
|
||||
scd = data.get("sensor_check")
|
||||
out["sensor_check"] = (
|
||||
{ch: v.tolist() for ch, v in scd.items()} if scd else None
|
||||
)
|
||||
return out
|
||||
|
||||
|
||||
def _build_plot_dict(
|
||||
|
||||
+181
-45
@@ -121,6 +121,13 @@ class ReportData:
|
||||
t0_ms: Optional[float] = None
|
||||
dt_ms: Optional[float] = None
|
||||
|
||||
# Sensor self-check traces — {ch: [samples]} in raw counts, read from the
|
||||
# standardized .h5 (/sensor_check group, schema v2+) where the per-series
|
||||
# decoder stored them at ingest. The little diagnostic waveforms BW draws
|
||||
# in its "Sensor Check" strip. Empty when absent (pre-v2 .h5, histogram,
|
||||
# or 3-channel unit's MicL).
|
||||
sensor_check_waveforms: dict = field(default_factory=dict)
|
||||
|
||||
# Record-type discriminator
|
||||
record_type: Optional[str] = None
|
||||
is_histogram: bool = False
|
||||
@@ -246,6 +253,8 @@ def gather_report_data(
|
||||
"peak_accel_g": ch.get("peak_accel_g"),
|
||||
"peak_disp_in": ch.get("peak_disp_in"),
|
||||
"sensor_check": sc_ch.get("result"),
|
||||
"sc_freq_hz": sc_ch.get("freq_hz"),
|
||||
"sc_ratio": sc_ch.get("ratio"),
|
||||
"peak_date": peak_date,
|
||||
"peak_time": peak_time,
|
||||
})
|
||||
@@ -287,6 +296,12 @@ def gather_report_data(
|
||||
rd.pretrig_samples = ta.get("pretrig_samples")
|
||||
rd.t0_ms = ta.get("t0_ms")
|
||||
rd.dt_ms = ta.get("dt_ms")
|
||||
# Sensor self-check traces — read from the standardized .h5 (schema
|
||||
# v2+). Device-agnostic: whichever decoder produced the event
|
||||
# stored them at ingest, so SFM reads them here without knowing or
|
||||
# caring about the source instrument series. Empty on pre-v2 files
|
||||
# (until backfilled) and on 3-channel / histogram events.
|
||||
rd.sensor_check_waveforms = wf.get("sensor_check") or {}
|
||||
except Exception as exc:
|
||||
log.warning("gather_report_data: hdf5 read failed: %s", exc)
|
||||
|
||||
@@ -396,9 +411,34 @@ def _render_waveform_layout(fig, rd: ReportData) -> None:
|
||||
ax_stats = fig.add_subplot(gs[2]); ax_stats.axis("off")
|
||||
_draw_channel_stats_waveform(ax_stats, rd)
|
||||
|
||||
_draw_compliance_panel(fig, rd)
|
||||
_draw_waveform_subplot(fig, gs[3], rd)
|
||||
|
||||
|
||||
# Compliance-chart placement, in figure fractions. Measured directly off a
|
||||
# Blastware Event Report PDF (ref-stuff/n844lqhbzt0w_bw_pdf.pdf) so the chart
|
||||
# matches BW's size and position: it spans from just under the header down
|
||||
# through the stats band, hard against the right page margin. The left edge
|
||||
# leaves room for the y-axis tick labels + "Velocity (in/s)" title, which the
|
||||
# compacted stats table (see _draw_channel_stats_waveform) is sized to clear.
|
||||
_COMPLIANCE_BOX = (0.489, 0.502, 0.951, 0.867) # x0, y0, x1, y1
|
||||
|
||||
|
||||
def _draw_compliance_panel(fig, rd: ReportData) -> None:
|
||||
"""Large USBM RI8507 compliance chart in the upper-right, sized and
|
||||
positioned to match Blastware's Event Report (see _COMPLIANCE_BOX)."""
|
||||
x0, y0, x1, y1 = _COMPLIANCE_BOX
|
||||
fig.text((x0 + x1) / 2, y1 + 0.006, "USBM RI8507 And OSMRE", fontsize=9,
|
||||
weight="bold", color="#333", ha="center", va="bottom")
|
||||
if rd.channels and rd.sample_rate_sps:
|
||||
from sfm.compliance import draw_compliance_chart
|
||||
ax = fig.add_axes([x0, y0, x1 - x0, y1 - y0])
|
||||
draw_compliance_chart(ax, rd.channels, rd.sample_rate_sps)
|
||||
else:
|
||||
fig.text((x0 + x1) / 2, (y0 + y1) / 2, "(no waveform data)", fontsize=8,
|
||||
color="#bbb", ha="center", va="center", style="italic")
|
||||
|
||||
|
||||
def _render_histogram_layout(fig, rd: ReportData) -> None:
|
||||
"""Histogram layout: header / mic-only / per-channel stats / bar plot.
|
||||
|
||||
@@ -477,11 +517,11 @@ def _split_iso_to_date_time(iso: Optional[str]) -> tuple[Optional[str], Optional
|
||||
return (None, None)
|
||||
|
||||
|
||||
def _kv(ax, x, y, label, value, *, label_w=0.18):
|
||||
def _kv(ax, x, y, label, value, *, label_w=0.18, fontsize=8):
|
||||
"""Render a 'Label Value' row at axes-coordinates (x, y)."""
|
||||
ax.text(x, y, label, fontsize=8, color="#555", ha="left", va="top",
|
||||
ax.text(x, y, label, fontsize=fontsize, color="#555", ha="left", va="top",
|
||||
transform=ax.transAxes)
|
||||
ax.text(x + label_w, y, _fmt(value), fontsize=8, ha="left", va="top",
|
||||
ax.text(x + label_w, y, _fmt(value), fontsize=fontsize, ha="left", va="top",
|
||||
transform=ax.transAxes, family="monospace")
|
||||
|
||||
|
||||
@@ -544,14 +584,17 @@ def _draw_header_columns(ax, rows_left, rd: ReportData) -> None:
|
||||
("File Name", rd.file_name),
|
||||
("Post Event Notes", rd.post_event_notes),
|
||||
]
|
||||
# fontsize 7.5 (BW's header is a touch smaller than our body text) + a
|
||||
# tighter right-column value indent so the long serial+firmware line
|
||||
# ("BE##### V ##.##-#.## MiniMate Plus") fits without running off the page.
|
||||
y = 0.95
|
||||
dy = 0.095
|
||||
for label, value in rows_left:
|
||||
_kv(ax, 0.0, y, label, value, label_w=0.18)
|
||||
_kv(ax, 0.0, y, label, value, label_w=0.18, fontsize=7.5)
|
||||
y -= dy
|
||||
y = 0.95
|
||||
for label, value in rows_right:
|
||||
_kv(ax, 0.55, y, label, value, label_w=0.20)
|
||||
_kv(ax, 0.55, y, label, value, label_w=0.14, fontsize=7.5)
|
||||
y -= dy
|
||||
|
||||
|
||||
@@ -574,19 +617,14 @@ def _draw_mic_and_usbm(ax, rd: ReportData) -> None:
|
||||
transform=ax.transAxes, va="top")
|
||||
rows = _mic_rows(rd)
|
||||
y = 0.80
|
||||
# Tighter label indent + slightly smaller font so the long "Channel Test
|
||||
# Passed (Freq = … Amp = … mv)" line clears the enlarged compliance chart's
|
||||
# left edge (_COMPLIANCE_BOX) instead of running behind it.
|
||||
for label, value in rows:
|
||||
_kv(ax, 0.0, y, label, value, label_w=0.18)
|
||||
_kv(ax, 0.0, y, label, value, label_w=0.13, fontsize=7)
|
||||
y -= 0.15
|
||||
|
||||
# USBM chart placeholder — upper-right. Real piecewise compliance
|
||||
# curves are a separate work item; for now this just shows the title
|
||||
# + a "see report" message so the layout is correct.
|
||||
ax.text(0.72, 0.97, "USBM RI8507 And OSMRE",
|
||||
fontsize=9, weight="bold", color="#333", ha="center", va="top",
|
||||
transform=ax.transAxes)
|
||||
ax.text(0.72, 0.50, "[compliance chart\ncoming soon]",
|
||||
fontsize=8, color="#bbb", ha="center", va="center",
|
||||
transform=ax.transAxes, style="italic")
|
||||
# The USBM compliance chart is drawn as its own large square panel spanning
|
||||
# the mic + stats rows on the right — see _draw_compliance_panel().
|
||||
|
||||
|
||||
def _mic_rows(rd: ReportData) -> list[tuple[str, Optional[str]]]:
|
||||
@@ -636,8 +674,18 @@ def _draw_channel_stats_waveform(ax, rd: ReportData) -> None:
|
||||
("Peak Acceleration", "peak_accel_g", "g"),
|
||||
("Peak Displacement", "peak_disp_in", "in"),
|
||||
("Sensor Check", "sensor_check", ""),
|
||||
# Sensor-check sub-rows (indented under "Sensor Check", like BW): the
|
||||
# geophone ring-down frequency + overswing ratio from the self-check.
|
||||
(" Frequency", "sc_freq_hz", "Hz"),
|
||||
(" Overswing Ratio", "sc_ratio", ""),
|
||||
]
|
||||
_draw_stats_table(ax, rd, rows_spec)
|
||||
# Compacted to the left half so the enlarged compliance chart (BW-sized,
|
||||
# right against the page margin) has room — see _COMPLIANCE_BOX.
|
||||
_draw_stats_table(
|
||||
ax, rd, rows_spec,
|
||||
bbox_width=0.42, fontsize=7.5,
|
||||
col_widths=[0.185, 0.065, 0.065, 0.065, 0.040],
|
||||
)
|
||||
_draw_pvs_summary(ax, rd, n_data_rows=len(rows_spec))
|
||||
|
||||
|
||||
@@ -698,19 +746,39 @@ def _draw_pvs_summary(
|
||||
table_bottom_y = getattr(ax, "_stats_table_bottom", -0.10)
|
||||
pvs_y = table_bottom_y - 0.04 # small gap below the table border
|
||||
|
||||
# Centered for visual balance — looks intentional rather than offset.
|
||||
# The original BW-replica had a "NA: Not Applicable" caption below
|
||||
# this line; dropped because we use "—" for missing values and the
|
||||
# legend was always squished against the PVS line.
|
||||
ax.text(0.5, pvs_y, line, fontsize=9, weight="bold",
|
||||
ha="center", va="top", transform=ax.transAxes)
|
||||
# Centered under the stats table for visual balance — looks intentional
|
||||
# rather than offset. When the table is compacted (waveform layout), it
|
||||
# occupies only the left portion of the axes, so center on the table's
|
||||
# width rather than the full axes (which would push the line under the
|
||||
# compliance chart). The original BW-replica had a "NA: Not Applicable"
|
||||
# caption below this line; dropped because we use "—" for missing values.
|
||||
table_w = getattr(ax, "_stats_table_width", 0.80)
|
||||
if table_w < 0.79:
|
||||
# Compacted (waveform) layout: left-align under the table, one point
|
||||
# smaller, so the line clears the enlarged compliance chart's
|
||||
# bottom-left tick labels on the right.
|
||||
ax.text(0.0, pvs_y, line, fontsize=8, weight="bold",
|
||||
ha="left", va="top", transform=ax.transAxes)
|
||||
else:
|
||||
ax.text(0.5, pvs_y, line, fontsize=9, weight="bold",
|
||||
ha="center", va="top", transform=ax.transAxes)
|
||||
|
||||
|
||||
def _draw_stats_table(ax, rd: ReportData, rows_spec: list[tuple[str, str, str]]) -> None:
|
||||
def _draw_stats_table(
|
||||
ax, rd: ReportData, rows_spec: list[tuple[str, str, str]],
|
||||
*, bbox_width: float = 0.80, fontsize: float = 8,
|
||||
col_widths: Optional[list[float]] = None,
|
||||
) -> None:
|
||||
"""Render a per-channel stats table (Tran/Vert/Long).
|
||||
|
||||
rows_spec: list of (label, field_name_in_channel_stats, unit_string)
|
||||
|
||||
``bbox_width`` / ``col_widths`` / ``fontsize`` let a caller compact the
|
||||
table (the waveform layout packs it into the left half to clear the
|
||||
compliance chart; the histogram layout keeps the wider defaults).
|
||||
"""
|
||||
if col_widths is None:
|
||||
col_widths = [0.28, 0.14, 0.14, 0.14, 0.10]
|
||||
headers = ["", "Tran", "Vert", "Long", ""]
|
||||
ch_lookup = {c["name"]: c for c in rd.channel_stats}
|
||||
|
||||
@@ -726,6 +794,8 @@ def _draw_stats_table(ax, rd: ReportData, rows_spec: list[tuple[str, str, str]])
|
||||
if field == "zc_freq_hz":
|
||||
prefix = ">" if ch_rec.get("zc_freq_above_range") else ""
|
||||
return f"{prefix}{val:.0f}"
|
||||
if field in ("sc_freq_hz", "sc_ratio"):
|
||||
return f"{val:.1f}" # BW shows 1 decimal (7.5 Hz, 3.6)
|
||||
return f"{val:.3f}"
|
||||
return str(val)
|
||||
|
||||
@@ -750,16 +820,17 @@ def _draw_stats_table(ax, rd: ReportData, rows_spec: list[tuple[str, str, str]])
|
||||
table_bottom = 1.0 - table_height
|
||||
tbl = ax.table(
|
||||
cellText=table_data,
|
||||
colWidths=[0.28, 0.14, 0.14, 0.14, 0.10],
|
||||
colWidths=col_widths,
|
||||
cellLoc="left", edges="open",
|
||||
bbox=[0.0, table_bottom, 0.80, table_height],
|
||||
bbox=[0.0, table_bottom, bbox_width, table_height],
|
||||
)
|
||||
tbl.auto_set_font_size(False)
|
||||
tbl.set_fontsize(8)
|
||||
tbl.set_fontsize(fontsize)
|
||||
for j in range(5):
|
||||
tbl[(0, j)].set_text_props(weight="bold", color="#555")
|
||||
# Stash the bottom Y so _draw_pvs_summary can position itself below.
|
||||
# Stash the bottom Y + width so _draw_pvs_summary can position itself.
|
||||
ax._stats_table_bottom = table_bottom
|
||||
ax._stats_table_width = bbox_width
|
||||
|
||||
|
||||
def _channel_axis_color(ch: str) -> str:
|
||||
@@ -769,27 +840,59 @@ def _channel_axis_color(ch: str) -> str:
|
||||
def _draw_waveform_subplot(fig, gridspec_cell, rd: ReportData) -> None:
|
||||
"""4-channel stacked waveform plot — Instantel printout order
|
||||
(MicL on top, Tran on bottom), shared x-axis in SECONDS, trigger
|
||||
triangle markers at t=0, '0.0' baseline label on right of each."""
|
||||
inner = gridspec_cell.subgridspec(4, 1, hspace=0.0)
|
||||
triangle markers at t=0, '0.0' baseline label on right of each.
|
||||
|
||||
When sensor self-check traces are present (rd.sensor_check_waveforms), a
|
||||
narrow "Sensor Check" strip of per-channel mini-plots is drawn to the right,
|
||||
aligned to the lanes — matching Blastware's Event Report.
|
||||
"""
|
||||
from matplotlib.ticker import MaxNLocator
|
||||
|
||||
order = ["MicL", "Long", "Vert", "Tran"]
|
||||
has_sc = bool(rd.sensor_check_waveforms)
|
||||
if has_sc:
|
||||
# main lanes + a narrow sensor-check strip column, flush against the
|
||||
# main panel (BW shares the border — no gap), with the "0.0" baseline
|
||||
# labels moved to the right of the strip. Proportions match BW's
|
||||
# Event Report (main ~0.75 / strip ~0.10 of the panel width).
|
||||
inner = gridspec_cell.subgridspec(4, 2, width_ratios=[1.0, 0.13],
|
||||
wspace=0.0, hspace=0.0)
|
||||
else:
|
||||
inner = gridspec_cell.subgridspec(4, 1, hspace=0.0)
|
||||
sr = rd.sample_rate_sps or 1024
|
||||
# Convert ms-based time axis to seconds for the x-axis
|
||||
dt_s = (rd.dt_ms or (1000.0 / sr)) / 1000.0
|
||||
t0_s = (rd.t0_ms if rd.t0_ms is not None else 0.0) / 1000.0
|
||||
|
||||
# Shared geo scale across Long/Vert/Tran (matches the event modal + BW's
|
||||
# single amp/div): all three geo lanes use ONE Y scale = the max |sample|
|
||||
# across them (padded, floored), so relative amplitudes stay honest instead
|
||||
# of each lane auto-zooming to its own peak. Mic keeps its own (psi) scale.
|
||||
GEO_FLOOR_INS = 0.05
|
||||
_geo_amax = 0.0
|
||||
for _gch in ("Long", "Vert", "Tran"):
|
||||
for _x in (rd.channels.get(_gch) or []):
|
||||
_a = abs(_x)
|
||||
if _a > _geo_amax:
|
||||
_geo_amax = _a
|
||||
geo_shared = max(_geo_amax * 1.10, GEO_FLOOR_INS)
|
||||
|
||||
main_axes = []
|
||||
sc_axes = []
|
||||
last_idx = len(order) - 1
|
||||
for i, ch in enumerate(order):
|
||||
ax = fig.add_subplot(inner[i])
|
||||
ax = fig.add_subplot(inner[i, 0] if has_sc else inner[i])
|
||||
main_axes.append(ax)
|
||||
values = rd.channels.get(ch) or []
|
||||
times = [t0_s + j * dt_s for j in range(len(values))]
|
||||
|
||||
if values:
|
||||
color = _channel_axis_color(ch)
|
||||
ax.plot(times, values, color=color, linewidth=0.5)
|
||||
# Symmetric y-axis for geo; zero-anchored for mic.
|
||||
# Geo: one shared symmetric scale (honest relative amplitudes).
|
||||
# Mic: symmetric on its own psi scale (different unit).
|
||||
if ch != "MicL":
|
||||
amax = max((abs(v) for v in values), default=0.001)
|
||||
ax.set_ylim(-amax * 1.10, amax * 1.10)
|
||||
ax.set_ylim(-geo_shared, geo_shared)
|
||||
else:
|
||||
amax = max((abs(v) for v in values), default=0.001)
|
||||
ax.set_ylim(-amax * 1.10, amax * 1.10)
|
||||
@@ -797,9 +900,12 @@ def _draw_waveform_subplot(fig, gridspec_cell, rd: ReportData) -> None:
|
||||
# Channel label on the LEFT (matches BW)
|
||||
ax.set_ylabel(ch, fontsize=8, rotation=0, ha="right", va="center",
|
||||
color=_channel_axis_color(ch), weight="bold", labelpad=14)
|
||||
# "0.0" on the RIGHT (BW convention)
|
||||
ax.text(1.005, 0.5, "0.0", transform=ax.transAxes,
|
||||
fontsize=7, color="#555", va="center", ha="left")
|
||||
# "0.0" baseline label on the RIGHT (BW convention). With the sensor-
|
||||
# check strip attached, it goes to the right of the STRIP (drawn below);
|
||||
# otherwise just outside the main lane.
|
||||
if not has_sc:
|
||||
ax.text(1.005, 0.5, "0.0", transform=ax.transAxes,
|
||||
fontsize=7, color="#555", va="center", ha="left")
|
||||
|
||||
ax.grid(True, linestyle="--", linewidth=0.3, color="#bbb", alpha=0.6)
|
||||
# Vertical dashed trigger line at t=0
|
||||
@@ -814,23 +920,53 @@ def _draw_waveform_subplot(fig, gridspec_cell, rd: ReportData) -> None:
|
||||
else:
|
||||
ax.tick_params(axis="x", labelsize=7)
|
||||
ax.tick_params(axis="y", labelsize=6)
|
||||
# Stacked lanes touch, so the top/bottom y-tick labels of adjacent lanes
|
||||
# would overprint at the shared boundary. Prune the extreme ticks so
|
||||
# each boundary shows clean interior ticks (0.5 / 0.0 / -0.5) only.
|
||||
ax.yaxis.set_major_locator(MaxNLocator(nbins=4, prune="both"))
|
||||
|
||||
# Sensor self-check mini-plot in the right strip (aligned to this lane).
|
||||
if has_sc:
|
||||
scx = fig.add_subplot(inner[i, 1])
|
||||
sc_axes.append(scx)
|
||||
sc_vals = rd.sensor_check_waveforms.get(ch) or []
|
||||
if sc_vals:
|
||||
_col = _channel_axis_color(ch)
|
||||
# Faint zero baseline (BW draws the channel baseline through the
|
||||
# strip) — reference for the one-sided geophone ring-downs.
|
||||
scx.axhline(0.0, color=_col, linewidth=0.3, alpha=0.4)
|
||||
scx.plot(range(len(sc_vals)), sc_vals, color=_col, linewidth=0.5)
|
||||
# Fit the trace to the box (BW-style) rather than a symmetric
|
||||
# scale: the geo self-checks are one-sided dips, so a symmetric
|
||||
# scale would strand them in the bottom half with an empty top.
|
||||
_lo, _hi = min(sc_vals), max(sc_vals)
|
||||
_pad = 0.10 * ((_hi - _lo) or 1.0)
|
||||
scx.set_ylim(_lo - _pad, _hi + _pad)
|
||||
scx.set_xticks([]); scx.set_yticks([])
|
||||
for _s in scx.spines.values():
|
||||
_s.set_linewidth(0.4); _s.set_color("#999")
|
||||
# "0.0" baseline label to the RIGHT of the strip (BW convention)
|
||||
scx.text(1.10, 0.5, "0.0", transform=scx.transAxes,
|
||||
fontsize=7, color="#555", va="center", ha="left")
|
||||
|
||||
# Trigger triangle marker ▼ above the top channel at t=0
|
||||
top_ax = fig.axes[-4] # MicL is the first added in this gridspec
|
||||
top_ax = main_axes[0] # MicL
|
||||
top_ax.plot([0], [top_ax.get_ylim()[1]], marker="v", color="black",
|
||||
markersize=8, clip_on=False, zorder=10)
|
||||
|
||||
# "Sensor Check" caption under the strip (BW convention)
|
||||
if has_sc and sc_axes:
|
||||
pos = sc_axes[-1].get_position()
|
||||
fig.text((pos.x0 + pos.x1) / 2, pos.y0 - 0.012, "Sensor Check",
|
||||
fontsize=7, color="#555", ha="center", va="top")
|
||||
|
||||
# Compute scale-per-division for the footer (10 divs across the chart)
|
||||
# and find peak geo amplitude for the geo amp/div setting.
|
||||
total_s = times[-1] - times[0] if values else 0
|
||||
div_s = total_s / 10 if total_s > 0 else 0
|
||||
geo_amp_div = "—"
|
||||
for ch in ("Tran", "Vert", "Long"):
|
||||
v = rd.channels.get(ch) or []
|
||||
if v:
|
||||
amax = max(abs(x) for x in v)
|
||||
geo_amp_div = f"{(amax * 1.1 * 2) / 10:.3f}"
|
||||
break
|
||||
# Footer div value reflects the SHARED geo scale (so it's correct for all
|
||||
# three lanes, not just whichever one happened to be checked first).
|
||||
geo_amp_div = f"{(geo_shared * 2) / 10:.3f}" if _geo_amax > 0 else "—"
|
||||
fig.text(
|
||||
0.11, 0.030,
|
||||
f"Time(Seconds) {div_s:.2f} sec/div Amplitude Geo: {geo_amp_div} in/s/div Mic: 0.001 psi(L)/div",
|
||||
|
||||
+3
-2
@@ -67,6 +67,7 @@ from minimateplus.blastware_file import write_blastware_file, blastware_filename
|
||||
from minimateplus.client import _decode_a5_metadata_into, _decode_a5_waveform, _decode_event_count
|
||||
from minimateplus.framing import build_bw_write_frame, SESSION_RESET, POLL_PROBE, POLL_DATA
|
||||
from minimateplus.protocol import SUB_STOP_MONITORING
|
||||
from minimateplus.event_file_io import TOOL_VERSION as SFM_VERSION # single source for the service version (release-bumped)
|
||||
from sfm import event_hdf5
|
||||
from sfm.cache import SFMCache, get_cache
|
||||
from sfm.database import SeismoDb
|
||||
@@ -90,7 +91,7 @@ app = FastAPI(
|
||||
"Implements the minimateplus RS-232 protocol library.\n"
|
||||
"Proxied by terra-view at /api/sfm/*."
|
||||
),
|
||||
version="0.26.0",
|
||||
version=SFM_VERSION,
|
||||
)
|
||||
|
||||
# Allow requests from the waveform viewer opened as a local file (file://)
|
||||
@@ -371,7 +372,7 @@ def _backfill_events(events: list, info: "DeviceInfo") -> None:
|
||||
@app.get("/health")
|
||||
def health() -> dict:
|
||||
"""Service heartbeat. No device I/O."""
|
||||
return {"status": "ok", "service": "sfm", "version": "0.1.0"}
|
||||
return {"status": "ok", "service": "sfm", "version": SFM_VERSION}
|
||||
|
||||
|
||||
@app.get("/", response_class=FileResponse)
|
||||
|
||||
+295
-20
@@ -108,6 +108,12 @@
|
||||
color: var(--text);
|
||||
}
|
||||
.btn-ghost:hover { border-color: var(--blue-lt); color: var(--blue-lt); }
|
||||
.btn-danger { background: var(--red); color: #fff; }
|
||||
.btn-danger:hover:not(:disabled) { filter: brightness(1.15); }
|
||||
.diag-result { display:block; margin-top:6px; font-size:12px; opacity:.85;
|
||||
white-space:pre-wrap; word-break:break-word; }
|
||||
.diag-result.ok { color: var(--green); }
|
||||
.diag-result.error { color: var(--red); }
|
||||
.btn:disabled { background: var(--surface2) !important; color: var(--text-mute) !important; cursor: not-allowed; border-color: var(--border2) !important; }
|
||||
|
||||
/* #connect-btn styles moved to #live-connect-bar block */
|
||||
@@ -910,6 +916,7 @@
|
||||
<button class="tab-btn" data-tab="events" onclick="switchTab('events')">Events</button>
|
||||
<button class="tab-btn" data-tab="config" onclick="switchTab('config')">Config</button>
|
||||
<button class="tab-btn" data-tab="call-home" onclick="switchTab('call-home')">Call Home</button>
|
||||
<button class="tab-btn" data-tab="diagnostics" onclick="switchTab('diagnostics')">Diagnostics</button>
|
||||
</div>
|
||||
|
||||
<!-- ════════════════════════════════════════════════════════════════
|
||||
@@ -938,6 +945,10 @@
|
||||
<div id="tab-events" class="tab-pane" style="display:flex; flex-direction:column; overflow:hidden;">
|
||||
|
||||
<div class="event-toolbar">
|
||||
<button class="btn btn-ghost" id="load-events-btn" onclick="loadEventList()" disabled
|
||||
title="Walk the device's event chain and list its stored events. This is the slow one — it reads every event header over the cellular link.">
|
||||
⟳ Load events
|
||||
</button>
|
||||
<button class="btn btn-ghost" id="load-btn" onclick="loadWaveform()" disabled>Load Waveform</button>
|
||||
<button class="btn btn-ghost" id="save-btn" onclick="saveEventToDb()" disabled
|
||||
title="Download the full waveform from the device and save it to the SFM database + waveform store. Honors the Force refresh toggle.">
|
||||
@@ -1205,6 +1216,77 @@
|
||||
|
||||
</div><!-- end #tab-call-home -->
|
||||
|
||||
<!-- ════════════════════════════════════════════════════════════════
|
||||
TAB: Diagnostics
|
||||
═══════════════════════════════════════════════════════════════════ -->
|
||||
<div id="tab-diagnostics" class="tab-pane">
|
||||
|
||||
<div class="cfg-grid">
|
||||
|
||||
<div class="cfg-section">
|
||||
<div class="cfg-section-title">Device State</div>
|
||||
<div class="hint" style="margin-bottom:10px">
|
||||
Fast probes — POLL plus one read each, about 2 s. None of these walk the event chain.
|
||||
</div>
|
||||
<div class="dev-table" id="diag-table"></div>
|
||||
<div class="cfg-actions" style="margin-top:12px">
|
||||
<button class="btn btn-ghost" id="diag-refresh-btn" onclick="refreshDiagnostics()" disabled>Refresh</button>
|
||||
<span id="diag-status"></span>
|
||||
</div>
|
||||
</div>
|
||||
|
||||
<div class="cfg-section">
|
||||
<div class="cfg-section-title">Actions</div>
|
||||
|
||||
<div class="cfg-field">
|
||||
<label>Stop Monitoring</label>
|
||||
<button class="btn btn-ghost" id="diag-stop-btn" onclick="diagStopMonitoring()" disabled>Send Stop (SUB 0x97)</button>
|
||||
<div class="hint">Halts recording. On a unit triggering continuously, this is what breaks the call-home loop.</div>
|
||||
<span class="diag-result" id="diag-stop-result"></span>
|
||||
</div>
|
||||
|
||||
<div class="cfg-field">
|
||||
<label>Disable Auto Call Home</label>
|
||||
<button class="btn btn-ghost" id="diag-ach-btn" onclick="diagDisableAch()" disabled>Disable ACH</button>
|
||||
<div class="hint">Stored events are left untouched (<code>rescue?erase=false</code>). The unit stops dialing out until ACH is re-enabled.</div>
|
||||
<span class="diag-result" id="diag-ach-result"></span>
|
||||
</div>
|
||||
|
||||
<div class="cfg-field">
|
||||
<label>Erase All Events</label>
|
||||
<input type="text" id="diag-erase-confirm" placeholder="Type the serial to enable"
|
||||
oninput="diagCheckEraseConfirm()" autocomplete="off" />
|
||||
<button class="btn btn-danger" id="diag-erase-btn" onclick="diagEraseEvents()" disabled>Erase Events</button>
|
||||
<div class="hint">⚠ Permanent, and resets the event chain to key <code>0x01110000</code>. Download anything worth keeping first.</div>
|
||||
<span class="diag-result" id="diag-erase-result"></span>
|
||||
</div>
|
||||
</div>
|
||||
|
||||
<div class="cfg-section">
|
||||
<div class="cfg-section-title">Unresponsive Unit</div>
|
||||
<div class="hint" style="margin-bottom:10px">
|
||||
The escalation ladder from <code>docs/runbooks/wedged_unit_recovery.md</code>, for a unit too busy
|
||||
to answer normal request/response. Prefer <b>Method A</b> — point the modem at an
|
||||
<code>ach_server</code> and answer its call — before racing it with these.
|
||||
</div>
|
||||
|
||||
<div class="cfg-field">
|
||||
<label>Slow drip <span class="hint" style="display:inline">(one held session, a stop every 3 s)</span></label>
|
||||
<button class="btn btn-ghost" id="diag-drip-btn" onclick="diagSlowDrip()" disabled>Run 120 s drip</button>
|
||||
<div class="hint">Success is <code>bytes_received > 0</code>. A full duration with <code>send_error: null</code> is <b>not</b> success on its own.</div>
|
||||
<span class="diag-result" id="diag-drip-result"></span>
|
||||
</div>
|
||||
|
||||
<div class="cfg-field">
|
||||
<label>Blind stop <span class="hint" style="display:inline">(fire-and-forget, one attempt)</span></label>
|
||||
<button class="btn btn-ghost" id="diag-blind-btn" onclick="diagBlindStop()" disabled>Send blind stop</button>
|
||||
<span class="diag-result" id="diag-blind-result"></span>
|
||||
</div>
|
||||
</div>
|
||||
|
||||
</div>
|
||||
</div><!-- end #tab-diagnostics -->
|
||||
|
||||
</div><!-- end #section-live -->
|
||||
|
||||
<!-- ════════════════════════════════════════════════════════════════
|
||||
@@ -1361,6 +1443,8 @@
|
||||
// ── State ──────────────────────────────────────────────────────────────────────
|
||||
let unitInfo = null;
|
||||
let eventList = [];
|
||||
let storageInfo = null; // /device/events/storage_range — cheap, read on connect
|
||||
let eventsLoaded = false; // the event chain walk is opt-in; see loadEventList()
|
||||
let currentEvent = 0;
|
||||
let charts = {};
|
||||
let geoAdcScale = 6.206;
|
||||
@@ -1458,6 +1542,7 @@ function switchTab(name) {
|
||||
if (name === 'units') { if (!unitsLoaded) loadUnits(); }
|
||||
if (name === 'monlog') { if (!monlogLoaded) loadMonitorLog(); }
|
||||
if (name === 'sessions') { if (!sessLoaded) loadSessions(); }
|
||||
if (name === 'diagnostics' && devHost() && unitInfo) refreshDiagnostics();
|
||||
}
|
||||
|
||||
// ── Connect ────────────────────────────────────────────────────────────────────
|
||||
@@ -1478,18 +1563,13 @@ async function connectUnit() {
|
||||
btn.disabled = false; btn.textContent = 'Connect'; return;
|
||||
}
|
||||
|
||||
setStatus('Fetching event list…', 'loading');
|
||||
try {
|
||||
const r = await fetch(`${api()}/device/events?${deviceParams()}`);
|
||||
if (!r.ok) { const e = await r.json().catch(() => ({})); throw new Error(e.detail || r.statusText); }
|
||||
const evData = await r.json();
|
||||
eventList = evData.events || [];
|
||||
// Merge compliance from /device/events response (it re-reads it)
|
||||
if (evData.device) unitInfo = { ...unitInfo, ...evData.device };
|
||||
} catch (e) {
|
||||
setStatus(`Event fetch failed: ${e.message}`, 'error');
|
||||
btn.disabled = false; btn.textContent = 'Reconnect'; return;
|
||||
}
|
||||
// Connecting deliberately does NOT walk the event chain. That walk reads
|
||||
// every event header over the cellular link and can take minutes — or fail
|
||||
// outright on a unit whose buffer has wrapped past 0xFFFF. Use the ~2 s
|
||||
// probes instead; the event list is opt-in via loadEventList().
|
||||
eventList = []; eventsLoaded = false;
|
||||
setStatus('Reading device state…', 'loading');
|
||||
storageInfo = await fetchJson(`/device/events/storage_range`).catch(() => null);
|
||||
|
||||
populateDeviceBar();
|
||||
populateDeviceTab();
|
||||
@@ -1498,11 +1578,9 @@ async function connectUnit() {
|
||||
|
||||
document.getElementById('device-bar').style.display = 'flex';
|
||||
document.getElementById('monitor-panel').style.display = 'flex';
|
||||
document.getElementById('load-btn').disabled = eventList.length === 0;
|
||||
document.getElementById('save-btn').disabled = eventList.length === 0;
|
||||
document.getElementById('download-btn').disabled = eventList.length === 0;
|
||||
document.getElementById('prev-btn').disabled = true;
|
||||
document.getElementById('next-btn').disabled = eventList.length <= 1;
|
||||
setEventButtonsEnabled();
|
||||
document.getElementById('load-events-btn').disabled = false;
|
||||
setDiagButtonsEnabled(true);
|
||||
document.getElementById('cfg-read-btn').disabled = false;
|
||||
document.getElementById('cfg-write-btn').disabled = false;
|
||||
document.getElementById('ch-read-btn').disabled = false;
|
||||
@@ -1510,7 +1588,9 @@ async function connectUnit() {
|
||||
|
||||
btn.disabled = false; btn.textContent = 'Reconnect';
|
||||
|
||||
setStatus(`Connected — ${eventList.length} event${eventList.length !== 1 ? 's' : ''} stored.`, 'ok');
|
||||
setStatus(storageInfo && storageInfo.is_empty
|
||||
? 'Connected — no events stored.'
|
||||
: 'Connected. Event list not loaded (Events → Load events).', 'ok');
|
||||
|
||||
// Fetch monitor status in background (non-blocking)
|
||||
refreshMonitorStatus().catch(() => {});
|
||||
@@ -1522,6 +1602,48 @@ async function connectUnit() {
|
||||
}
|
||||
}
|
||||
|
||||
// ── Shared fetch helper ────────────────────────────────────────────────────────
|
||||
async function fetchJson(path, opts) {
|
||||
const sep = path.includes('?') ? '&' : '?';
|
||||
const r = await fetch(`${api()}${path}${sep}${deviceParams()}`, opts);
|
||||
const body = await r.json().catch(() => ({}));
|
||||
if (!r.ok) throw new Error(body.detail || r.statusText);
|
||||
return body;
|
||||
}
|
||||
|
||||
function setEventButtonsEnabled() {
|
||||
const n = eventList.length;
|
||||
document.getElementById('load-btn').disabled = n === 0;
|
||||
document.getElementById('save-btn').disabled = n === 0;
|
||||
document.getElementById('download-btn').disabled = n === 0;
|
||||
document.getElementById('prev-btn').disabled = true;
|
||||
document.getElementById('next-btn').disabled = n <= 1;
|
||||
}
|
||||
|
||||
// ── Event list (opt-in — this is the slow chain walk) ──────────────────────────
|
||||
async function loadEventList() {
|
||||
if (!devHost()) { setStatus('Connect to a device first.', 'error'); return; }
|
||||
const btn = document.getElementById('load-events-btn');
|
||||
btn.disabled = true;
|
||||
setStatus('Walking the event chain — this can take a while…', 'loading');
|
||||
try {
|
||||
const evData = await fetchJson('/device/events');
|
||||
eventList = evData.events || [];
|
||||
eventsLoaded = true;
|
||||
// /device/events re-reads compliance; fold it in.
|
||||
if (evData.device) unitInfo = { ...unitInfo, ...evData.device };
|
||||
} catch (e) {
|
||||
setStatus(`Event fetch failed: ${e.message}`, 'error');
|
||||
btn.disabled = false; return;
|
||||
}
|
||||
populateDeviceBar();
|
||||
populateDeviceTab();
|
||||
populateEventChips();
|
||||
setEventButtonsEnabled();
|
||||
btn.disabled = false;
|
||||
setStatus(`${eventList.length} event${eventList.length !== 1 ? 's' : ''} stored.`, 'ok');
|
||||
}
|
||||
|
||||
// ── Device bar ─────────────────────────────────────────────────────────────────
|
||||
function populateDeviceBar() {
|
||||
qs('di-serial').textContent = unitInfo.serial || '—';
|
||||
@@ -1530,7 +1652,7 @@ function populateDeviceBar() {
|
||||
qs('di-sr').textContent = cc.sample_rate ? `${cc.sample_rate} sps` : '—';
|
||||
qs('di-rt').textContent = cc.record_time != null ? `${cc.record_time.toFixed(1)} s` : '—';
|
||||
qs('di-trig').textContent = cc.trigger_level_geo != null ? `${cc.trigger_level_geo.toFixed(3)} in/s` : '—';
|
||||
qs('di-count').textContent = eventList.length;
|
||||
qs('di-count').textContent = eventsLoaded ? eventList.length : '—';
|
||||
qs('di-project').textContent = cc.project || '—';
|
||||
qs('di-client').textContent = cc.client || '—';
|
||||
qs('di-operator').textContent = cc.operator || '—';
|
||||
@@ -1660,7 +1782,8 @@ function populateDeviceTab() {
|
||||
{ label:'DSP', value: unitInfo.dsp_version || '—' },
|
||||
{ label:'Model', value: unitInfo.model || '—' },
|
||||
{ label:'Manufacturer', value: unitInfo.manufacturer || '—' },
|
||||
{ label:'Stored Events', value: eventList.length },
|
||||
{ label:'Stored Events', value: eventsLoaded ? eventList.length : 'not loaded' },
|
||||
{ label:'Storage Used', value: storageUsedLabel() },
|
||||
];
|
||||
for (const {label, value} of cardData) {
|
||||
const c = document.createElement('div');
|
||||
@@ -1707,6 +1830,158 @@ function renderTable(id, rows) {
|
||||
}
|
||||
}
|
||||
|
||||
// ── Diagnostics ────────────────────────────────────────────────────────────────
|
||||
// Everything here is a cheap probe (POLL + one read) or a single write. None of
|
||||
// it walks the event chain. See docs/runbooks/wedged_unit_recovery.md.
|
||||
|
||||
function storageUsedLabel() {
|
||||
if (!storageInfo) return '—';
|
||||
if (storageInfo.is_empty) return 'empty';
|
||||
const f = storageInfo.first_key, l = storageInfo.last_key;
|
||||
return (f && l) ? `${f} → ${l}` : '—';
|
||||
}
|
||||
|
||||
function setDiagButtonsEnabled(on) {
|
||||
for (const id of ['diag-refresh-btn','diag-stop-btn','diag-ach-btn',
|
||||
'diag-drip-btn','diag-blind-btn']) {
|
||||
const el = document.getElementById(id);
|
||||
if (el) el.disabled = !on;
|
||||
}
|
||||
diagCheckEraseConfirm();
|
||||
}
|
||||
|
||||
// Erase is guarded by typing the serial — auth answers "who", not "did you mean it".
|
||||
function diagCheckEraseConfirm() {
|
||||
const box = document.getElementById('diag-erase-confirm');
|
||||
const btn = document.getElementById('diag-erase-btn');
|
||||
if (!box || !btn) return;
|
||||
const serial = (unitInfo && unitInfo.serial) || '';
|
||||
btn.disabled = !serial || box.value.trim().toUpperCase() !== serial.toUpperCase();
|
||||
}
|
||||
|
||||
function diagResult(id, text, cls) {
|
||||
const el = document.getElementById(id);
|
||||
if (!el) return;
|
||||
el.textContent = text;
|
||||
el.className = 'diag-result' + (cls ? ' ' + cls : '');
|
||||
}
|
||||
|
||||
async function refreshDiagnostics() {
|
||||
if (!devHost()) return;
|
||||
const st = document.getElementById('diag-status');
|
||||
if (st) { st.textContent = 'Reading…'; st.className = 'loading'; }
|
||||
|
||||
const [mon, store, idx] = await Promise.all([
|
||||
fetchJson('/device/monitor/status?force=true').catch(e => ({ _err: e.message })),
|
||||
fetchJson('/device/events/storage_range').catch(e => ({ _err: e.message })),
|
||||
fetchJson('/device/events/index').catch(e => ({ _err: e.message })),
|
||||
]);
|
||||
|
||||
if (!store._err) storageInfo = store;
|
||||
|
||||
const err = v => `<span style="color:var(--red)">${v}</span>`;
|
||||
const rows = [];
|
||||
|
||||
rows.push(['Monitoring', mon._err ? err(mon._err)
|
||||
: (mon.is_monitoring ? '<b>MONITORING</b>' : 'idle')]);
|
||||
if (!mon._err) {
|
||||
rows.push(['Battery', mon.battery_v != null ? `${mon.battery_v.toFixed(2)} V` : '—']);
|
||||
if (mon.memory_total_bytes) {
|
||||
const used = mon.memory_total_bytes - (mon.memory_free_bytes ?? 0);
|
||||
const pct = (used / mon.memory_total_bytes * 100).toFixed(1);
|
||||
rows.push(['Memory used', `${used.toLocaleString()} / ${mon.memory_total_bytes.toLocaleString()} bytes (${pct}%)`]);
|
||||
}
|
||||
}
|
||||
|
||||
rows.push(['Event chain', store._err ? err(store._err) : storageUsedLabel()]);
|
||||
if (!store._err) rows.push(['Chain empty', store.is_empty ? 'yes' : 'no']);
|
||||
|
||||
// SUB 0x08. Known to report 0 on units with years of history — suspected
|
||||
// field-offset bug in the decode, so show it but do not trust it.
|
||||
rows.push(['Lifetime events', idx._err ? err(idx._err)
|
||||
: `${idx.lifetime_count} <span class="hint" style="display:inline">(unreliable — see CHANGELOG)</span>`]);
|
||||
|
||||
renderTable('diag-table', rows);
|
||||
populateDeviceTab();
|
||||
if (st) { st.textContent = ''; st.className = ''; }
|
||||
}
|
||||
|
||||
async function diagStopMonitoring() {
|
||||
const btn = document.getElementById('diag-stop-btn');
|
||||
btn.disabled = true; diagResult('diag-stop-result', 'Sending…');
|
||||
try {
|
||||
await fetchJson('/device/monitor/stop', { method: 'POST' });
|
||||
diagResult('diag-stop-result', 'Stop acknowledged — recording halted.', 'ok');
|
||||
refreshDiagnostics();
|
||||
} catch (e) {
|
||||
diagResult('diag-stop-result', `Failed: ${e.message}`, 'error');
|
||||
}
|
||||
btn.disabled = false;
|
||||
}
|
||||
|
||||
async function diagDisableAch() {
|
||||
const btn = document.getElementById('diag-ach-btn');
|
||||
btn.disabled = true; diagResult('diag-ach-result', 'Writing call-home config…');
|
||||
try {
|
||||
const r = await fetchJson('/device/rescue?erase=false', { method: 'POST' });
|
||||
const steps = (r.steps || []).map(s => s.step).join(' → ') || 'done';
|
||||
diagResult('diag-ach-result', `ACH disabled (${steps}). Events untouched.`, 'ok');
|
||||
} catch (e) {
|
||||
diagResult('diag-ach-result', `Failed: ${e.message}`, 'error');
|
||||
}
|
||||
btn.disabled = false;
|
||||
}
|
||||
|
||||
async function diagEraseEvents() {
|
||||
const serial = (unitInfo && unitInfo.serial) || 'this unit';
|
||||
if (!confirm(`Permanently erase ALL events on ${serial}?\n\nThis cannot be undone.`)) return;
|
||||
const btn = document.getElementById('diag-erase-btn');
|
||||
btn.disabled = true; diagResult('diag-erase-result', 'Erasing…');
|
||||
try {
|
||||
await fetchJson('/device/events/erase', { method: 'POST' });
|
||||
diagResult('diag-erase-result', 'Events erased — chain reset to 0x01110000.', 'ok');
|
||||
document.getElementById('diag-erase-confirm').value = '';
|
||||
eventList = []; eventsLoaded = false;
|
||||
setEventButtonsEnabled(); populateEventChips();
|
||||
refreshDiagnostics();
|
||||
} catch (e) {
|
||||
diagResult('diag-erase-result', `Failed: ${e.message}`, 'error');
|
||||
}
|
||||
diagCheckEraseConfirm();
|
||||
}
|
||||
|
||||
async function diagSlowDrip() {
|
||||
const btn = document.getElementById('diag-drip-btn');
|
||||
btn.disabled = true;
|
||||
diagResult('diag-drip-result', 'Holding a session for 120 s…');
|
||||
try {
|
||||
const r = await fetchJson('/device/stop_monitoring_slow_drip?duration_s=120&interval_s=3',
|
||||
{ method: 'POST' });
|
||||
const good = (r.bytes_received || 0) > 0;
|
||||
diagResult('diag-drip-result',
|
||||
`drips ${r.drips_sent} · held ${r.duration_s}s · bytes back ${r.bytes_received}` +
|
||||
(r.send_error ? ` · ${r.send_error}` : '') +
|
||||
(good ? ' → device responded' : ' → no response; the modem may not be bridging'),
|
||||
good ? 'ok' : 'error');
|
||||
} catch (e) {
|
||||
diagResult('diag-drip-result', `Failed: ${e.message}`, 'error');
|
||||
}
|
||||
btn.disabled = false;
|
||||
}
|
||||
|
||||
async function diagBlindStop() {
|
||||
const btn = document.getElementById('diag-blind-btn');
|
||||
btn.disabled = true; diagResult('diag-blind-result', 'Sending…');
|
||||
try {
|
||||
const r = await fetchJson('/device/stop_monitoring_blind', { method: 'POST' });
|
||||
diagResult('diag-blind-result',
|
||||
`Sent ${r.bytes_sent ?? '?'} bytes, no response read (fire-and-forget).`, 'ok');
|
||||
} catch (e) {
|
||||
diagResult('diag-blind-result', `Failed: ${e.message}`, 'error');
|
||||
}
|
||||
btn.disabled = false;
|
||||
}
|
||||
|
||||
// ── Config form ────────────────────────────────────────────────────────────────
|
||||
function populateConfigFromDeviceInfo() {
|
||||
if (!unitInfo) return;
|
||||
|
||||
@@ -47,6 +47,60 @@ def shape_from_samples(chans: dict) -> dict | None:
|
||||
return s
|
||||
|
||||
|
||||
# ── Offset (DC-baseline) detection ────────────────────────────────────────────
|
||||
# A DC offset is a false trigger where the geophone baseline sits at a constant
|
||||
# non-zero floor (sensor bumped / settled / drifted) instead of oscillating
|
||||
# around zero. Brian's method (validated in scratch/offset_scan3.py): the
|
||||
# pre-trigger window is definitionally quiet, so a true offset shows |pre| off
|
||||
# zero AND stays flat across the record (pre ≈ mid ≈ end). A transient moves one
|
||||
# third relative to the others and is rejected by the spread test.
|
||||
# Thresholds are in in/s (the .h5 samples are already range-scaled); validated at
|
||||
# Normal range (10 in/s) — the only range in the fleet.
|
||||
OFFSET_FLOOR = 0.025 # |pre| at/above this reads as an off-zero baseline (5 A/D counts)
|
||||
OFFSET_MAX_SPREAD = 0.02 # max(pre,mid,end) - min(...) at/below this reads as flat/constant
|
||||
|
||||
|
||||
def _channel_offset(x, pretrig_n):
|
||||
"""Return (pre, spread, is_offset) for one channel, or None if unusable."""
|
||||
x = np.asarray(x, dtype=float)
|
||||
n = x.size
|
||||
if n < 3:
|
||||
return None
|
||||
t = n // 3
|
||||
pre = x[:pretrig_n] if (pretrig_n and 0 < pretrig_n < n) else x[:t]
|
||||
mid, end = x[t:2 * t], x[2 * t:]
|
||||
if pre.size == 0 or mid.size == 0 or end.size == 0:
|
||||
return None
|
||||
vals = [float(np.median(seg)) for seg in (pre, mid, end)]
|
||||
spread = max(vals) - min(vals)
|
||||
is_offset = abs(vals[0]) >= OFFSET_FLOOR and spread <= OFFSET_MAX_SPREAD
|
||||
return vals[0], spread, is_offset
|
||||
|
||||
|
||||
def offset_from_samples(chans: dict, pretrig_n) -> dict | None:
|
||||
"""Detect a DC-offset false trigger across the geophone channels.
|
||||
|
||||
An event is offset if ANY geo channel's pre-trigger baseline is off zero and
|
||||
flat across the record. Reports the tripping axis (or, if none trips, the
|
||||
most-offset-like axis) with its ``pre``/``spread`` for transparency + tuning.
|
||||
Returns None when no geo channel is usable.
|
||||
"""
|
||||
results = []
|
||||
for ax in _GEO_CHANNELS:
|
||||
x = chans.get(ax)
|
||||
if x is None:
|
||||
continue
|
||||
r = _channel_offset(x, pretrig_n)
|
||||
if r is not None:
|
||||
results.append((ax, r[0], r[1], r[2]))
|
||||
if not results:
|
||||
return None
|
||||
offenders = [r for r in results if r[3]]
|
||||
ax, pre, spread, _ = max(offenders or results, key=lambda r: abs(r[1]))
|
||||
return {"offset": bool(offenders), "axis": ax,
|
||||
"pre": round(pre, 6), "spread": round(spread, 6)}
|
||||
|
||||
|
||||
def shape_from_h5(path) -> dict | None:
|
||||
import h5py
|
||||
try:
|
||||
@@ -56,3 +110,18 @@ def shape_from_h5(path) -> dict | None:
|
||||
except Exception:
|
||||
return None
|
||||
return shape_from_samples(chans)
|
||||
|
||||
|
||||
def offset_from_h5(path) -> dict | None:
|
||||
"""offset_from_samples fed from an event's .h5 (float32 in/s geo samples +
|
||||
the pretrig_samples attribute)."""
|
||||
import h5py
|
||||
try:
|
||||
with h5py.File(path, "r") as f:
|
||||
chans = {ax: f[f"samples/{ax}"][:] for ax in _GEO_CHANNELS
|
||||
if f"samples/{ax}" in f}
|
||||
pretrig_n = f.attrs.get("pretrig_samples")
|
||||
except Exception:
|
||||
return None
|
||||
pretrig_n = int(pretrig_n) if pretrig_n is not None else 0
|
||||
return offset_from_samples(chans, pretrig_n)
|
||||
|
||||
+104
-13
@@ -32,6 +32,7 @@ from __future__ import annotations
|
||||
import datetime
|
||||
import logging
|
||||
import pickle
|
||||
import re
|
||||
import shutil
|
||||
from pathlib import Path
|
||||
from typing import Optional, Union
|
||||
@@ -41,7 +42,7 @@ from minimateplus.blastware_file import blastware_filename, write_blastware_file
|
||||
from minimateplus.framing import S3Frame
|
||||
from minimateplus.models import Event
|
||||
from sfm import event_hdf5
|
||||
from sfm.shape_metrics import shape_from_h5
|
||||
from sfm.shape_metrics import shape_from_h5, offset_from_h5
|
||||
|
||||
log = logging.getLogger("sfm.waveform_store")
|
||||
|
||||
@@ -270,6 +271,13 @@ class WaveformStore:
|
||||
"shape_sample_count": _shape["sample_count"],
|
||||
"shape_axis": _shape["axis"],
|
||||
} if _shape else {}
|
||||
_offset = offset_from_h5(hdf5_path) if hdf5_filename else None
|
||||
_offset_rec = {
|
||||
"shape_offset": 1 if _offset["offset"] else 0,
|
||||
"shape_offset_axis": _offset["axis"],
|
||||
"shape_offset_pre": _offset["pre"],
|
||||
"shape_offset_spread": _offset["spread"],
|
||||
} if _offset else {}
|
||||
return {
|
||||
"filename": filename,
|
||||
"filesize": filesize,
|
||||
@@ -278,6 +286,7 @@ class WaveformStore:
|
||||
"hdf5_filename": hdf5_filename,
|
||||
"sidecar_filename": sidecar_path.name,
|
||||
**_shape_rec,
|
||||
**_offset_rec,
|
||||
}
|
||||
|
||||
def save_imported_bw(
|
||||
@@ -371,8 +380,16 @@ class WaveformStore:
|
||||
|
||||
# Resolve serial. blastware_filename derives a 4-char prefix from
|
||||
# the numeric serial (e.g. BE11529 → M529); we go the other way
|
||||
# via the source filename if a hint wasn't given.
|
||||
serial = serial_hint or _serial_from_bw_filename(source_path.name) or "UNKNOWN"
|
||||
# if a hint wasn't given. The filename carries only the NUMBER,
|
||||
# so read the family prefix out of the body first — a BlastMate
|
||||
# ("BA") filed as "BE" is a unit that does not exist. The
|
||||
# filename-only decoder stays as the last resort.
|
||||
serial = (
|
||||
serial_hint
|
||||
or _serial_from_bw_bytes(bw_bytes, source_path.name)
|
||||
or _serial_from_bw_filename(source_path.name)
|
||||
or "UNKNOWN"
|
||||
)
|
||||
|
||||
# Use the source filename verbatim — it already encodes timestamp
|
||||
# + record type per BW's AB0T scheme, and we want to preserve it
|
||||
@@ -461,6 +478,13 @@ class WaveformStore:
|
||||
"shape_sample_count": _shape["sample_count"],
|
||||
"shape_axis": _shape["axis"],
|
||||
} if _shape else {}
|
||||
_offset = offset_from_h5(hdf5_path) if hdf5_filename else None
|
||||
_offset_rec = {
|
||||
"shape_offset": 1 if _offset["offset"] else 0,
|
||||
"shape_offset_axis": _offset["axis"],
|
||||
"shape_offset_pre": _offset["pre"],
|
||||
"shape_offset_spread": _offset["spread"],
|
||||
} if _offset else {}
|
||||
return ev, {
|
||||
"filename": filename,
|
||||
"filesize": filesize,
|
||||
@@ -470,6 +494,7 @@ class WaveformStore:
|
||||
"sidecar_filename": sidecar_path.name,
|
||||
"serial": serial,
|
||||
**_shape_rec,
|
||||
**_offset_rec,
|
||||
}
|
||||
|
||||
def save_imported_idf(
|
||||
@@ -570,8 +595,19 @@ class WaveformStore:
|
||||
)
|
||||
|
||||
# Binary-derived peaks fill in when the .txt didn't supply them.
|
||||
# They're ~3% low vs the device-authoritative .txt values (residual
|
||||
# codec drift), so .txt always wins when present.
|
||||
#
|
||||
# The old justification for this precedence -- "binary peaks are ~3%
|
||||
# low vs the .txt" -- was a decoder bug (geo LSB 0.0003 instead of
|
||||
# 0.000310308) and was fixed 2026-09-10; the binary now agrees with
|
||||
# Thor's own export per-sample. The .txt still wins when present
|
||||
# because it is what the operator sees in Thor's report.
|
||||
#
|
||||
# ⚠ One case where the .txt is the *less* accurate of the two:
|
||||
# Thor floors displayed histogram PPV at 0.0050 in/s, so on quiet
|
||||
# IDFH events the .txt reports 0.0050 while the binary decodes the
|
||||
# true ~0.0025. 41.4% of prod IDFH sidecars carry a component PPV
|
||||
# larger than their own vector sum because of it. Left as-is
|
||||
# deliberately, so stored peaks keep matching Thor's report.
|
||||
if binary_peaks is not None:
|
||||
if binary_peaks.transverse_ips and not report_dict.get("tran_ppv"):
|
||||
report_dict["tran_ppv"] = binary_peaks.transverse_ips
|
||||
@@ -626,6 +662,11 @@ class WaveformStore:
|
||||
ev.raw_samples = idf_samples
|
||||
n_samples = max((len(idf_samples.get(ch, [])) for ch in ("Tran", "Vert", "Long", "MicL")), default=0)
|
||||
ev.total_samples = ev.total_samples or n_samples
|
||||
# Sensor self-check traces from the IDFW fixed header (waveform
|
||||
# events only; {} on histograms / when absent). Carried on the
|
||||
# bridged Event so the .h5 writer persists them like series-3.
|
||||
from micromate.sensor_check import decode_idf_sensor_check
|
||||
ev.sensor_check = decode_idf_sensor_check(idf_bytes) or None
|
||||
|
||||
# For IDFH histograms there are no per-sample waveform arrays — the
|
||||
# device stores one peak ADC count per interval per channel. Synthesise
|
||||
@@ -751,6 +792,13 @@ class WaveformStore:
|
||||
"shape_sample_count": _shape["sample_count"],
|
||||
"shape_axis": _shape["axis"],
|
||||
} if _shape else {}
|
||||
_offset = offset_from_h5(hdf5_path) if hdf5_filename else None
|
||||
_offset_rec = {
|
||||
"shape_offset": 1 if _offset["offset"] else 0,
|
||||
"shape_offset_axis": _offset["axis"],
|
||||
"shape_offset_pre": _offset["pre"],
|
||||
"shape_offset_spread": _offset["spread"],
|
||||
} if _offset else {}
|
||||
return ev, {
|
||||
"filename": filename,
|
||||
"filesize": filesize,
|
||||
@@ -760,6 +808,7 @@ class WaveformStore:
|
||||
"sidecar_filename": sidecar_path.name,
|
||||
"serial": serial,
|
||||
**_shape_rec,
|
||||
**_offset_rec,
|
||||
}
|
||||
|
||||
def load_a5(self, serial: str, filename: str) -> Optional[list[S3Frame]]:
|
||||
@@ -816,20 +865,24 @@ class WaveformStore:
|
||||
|
||||
# ── helpers ─────────────────────────────────────────────────────────────────────
|
||||
|
||||
def _serial_from_bw_filename(name: str) -> Optional[str]:
|
||||
def _serial_number_from_bw_filename(name: str) -> Optional[int]:
|
||||
"""
|
||||
Reverse of `blastware_filename`'s serial-prefix encoding.
|
||||
Reverse of `blastware_filename`'s serial-prefix encoding — the NUMBER only.
|
||||
|
||||
BW filename format (V10.72): `<P><serial3><stem4>.<ext>`
|
||||
where P = chr(ord('B') + floor(serial // 1000))
|
||||
and serial3 = f"{serial % 1000:03d}".
|
||||
|
||||
Examples (from CLAUDE.md verification archive):
|
||||
P036... → BE14036 H907... → BE6907
|
||||
M529... → BE11529 T003... → BE18003
|
||||
P036... → 14036 H907... → 6907
|
||||
M529... → 11529 T003... → 18003
|
||||
L895... → 10895
|
||||
|
||||
Returns the inferred BE-prefix serial (e.g. "BE11529") or None when
|
||||
the filename doesn't match the expected pattern.
|
||||
⚠ The filename encodes **only the number**. The two-letter family
|
||||
prefix is NOT in it — "BE" is a MiniMate Plus, "BA" a BlastMate — so
|
||||
the prefix has to come from the file body (`_serial_from_bw_bytes`)
|
||||
or from an explicit hint. Returns None when the filename doesn't
|
||||
match the expected pattern.
|
||||
"""
|
||||
if not name:
|
||||
return None
|
||||
@@ -842,5 +895,43 @@ def _serial_from_bw_filename(name: str) -> Optional[str]:
|
||||
if prefix_letter < "B":
|
||||
return None
|
||||
thousands = ord(prefix_letter) - ord("B")
|
||||
serial_num = thousands * 1000 + int(base[1:4])
|
||||
return f"BE{serial_num}"
|
||||
return thousands * 1000 + int(base[1:4])
|
||||
|
||||
|
||||
_BW_SERIAL_RE = re.compile(rb"[A-Z]{2}\d{3,6}")
|
||||
|
||||
|
||||
def _serial_from_bw_bytes(data: bytes, name: str) -> Optional[str]:
|
||||
"""
|
||||
Read the real serial — prefix included — out of a BW file body.
|
||||
|
||||
The body carries the serial as a plain ASCII string ("BE9558",
|
||||
"BA10895"). We accept a candidate only when its numeric part matches
|
||||
the number the filename encodes, which keeps a stray byte sequence in
|
||||
the sample stream from being mistaken for a serial.
|
||||
|
||||
Returns None when the filename number can't be derived or no
|
||||
candidate in the body agrees with it — the caller then falls back.
|
||||
"""
|
||||
num = _serial_number_from_bw_filename(name)
|
||||
if num is None or not data:
|
||||
return None
|
||||
for match in _BW_SERIAL_RE.findall(data):
|
||||
candidate = match.decode("ascii", errors="replace")
|
||||
if candidate[2:].lstrip("0") == str(num):
|
||||
return candidate
|
||||
return None
|
||||
|
||||
|
||||
def _serial_from_bw_filename(name: str) -> Optional[str]:
|
||||
"""
|
||||
Best-effort serial from the filename alone.
|
||||
|
||||
⚠ The family prefix is a **guess** — the filename does not carry it.
|
||||
"BE" is right for every MiniMate Plus but wrong for a BlastMate, whose
|
||||
serials start "BA". Prefer `_serial_from_bw_bytes` whenever the file
|
||||
body is at hand; this exists for callers that only have a name
|
||||
(log lines, dry-run output).
|
||||
"""
|
||||
num = _serial_number_from_bw_filename(name)
|
||||
return None if num is None else f"BE{num}"
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -0,0 +1,50 @@
|
||||
"""Structural annotation of a Series-3 Blastware binary (for the seismo_lab
|
||||
Binary Inspector). The annotator maps byte ranges to labelled spans; anything
|
||||
the decoder can't account for is a first-class ``unknown`` span, so the whole
|
||||
file is tiled and the gaps (candidate FFT/spectral data) are visible.
|
||||
"""
|
||||
from pathlib import Path
|
||||
|
||||
from minimateplus.binary_annotate import annotate_blastware_binary, Span
|
||||
|
||||
# A known-good full-3-channel Series-3 waveform binary (the V70 cracking fixture).
|
||||
FIXTURE = Path(__file__).parent / "fixtures" / "5-11-26" / "M529LL1L.V70"
|
||||
|
||||
|
||||
def _raw() -> bytes:
|
||||
return FIXTURE.read_bytes()
|
||||
|
||||
|
||||
def test_spans_tile_the_whole_file():
|
||||
raw = _raw()
|
||||
spans = annotate_blastware_binary(raw)
|
||||
assert spans, "expected at least one span"
|
||||
assert spans[0].start == 0
|
||||
assert spans[-1].end == len(raw)
|
||||
for a, b in zip(spans, spans[1:]):
|
||||
assert a.end == b.start, f"gap/overlap between {a!r} and {b!r}"
|
||||
for s in spans:
|
||||
assert s.start < s.end, f"empty/negative span {s!r}"
|
||||
|
||||
|
||||
def test_strt_record_is_located():
|
||||
raw = _raw()
|
||||
spans = annotate_blastware_binary(raw)
|
||||
strt = [s for s in spans if s.kind == "strt"]
|
||||
assert strt, "expected a STRT region"
|
||||
assert raw[strt[0].start : strt[0].start + 4] == b"STRT"
|
||||
|
||||
|
||||
def test_geo_sample_records_annotated():
|
||||
raw = _raw()
|
||||
spans = annotate_blastware_binary(raw)
|
||||
chans = {s.label.split()[0] for s in spans if s.kind == "sample"}
|
||||
# V70 is a full three-geo-channel event.
|
||||
assert {"Tran", "Vert", "Long"} <= chans, f"expected geo records, got {chans}"
|
||||
|
||||
|
||||
def test_footer_is_last():
|
||||
raw = _raw()
|
||||
spans = annotate_blastware_binary(raw)
|
||||
assert spans[-1].kind == "footer"
|
||||
assert spans[-1].end - spans[-1].start == 26
|
||||
@@ -0,0 +1,35 @@
|
||||
"""USBM/OSMRE compliance curve + scatter logic (sfm.compliance).
|
||||
Rendering is verified visually against Blastware reports."""
|
||||
import math
|
||||
|
||||
import numpy as np
|
||||
|
||||
from sfm.compliance import limit_at, channel_compliance_points
|
||||
|
||||
|
||||
def test_osmre_velocity_segments():
|
||||
assert abs(limit_at(6.0) - 0.75) < 1e-9 # 3.5–12 Hz flat
|
||||
assert abs(limit_at(50.0) - 2.00) < 1e-9 # 30–100 Hz flat
|
||||
|
||||
|
||||
def test_displacement_segments():
|
||||
assert abs(limit_at(2.0) - 2 * math.pi * 2.0 * 0.030) < 1e-9 # low-freq 0.030 in
|
||||
assert abs(limit_at(20.0) - 2 * math.pi * 20.0 * 0.008) < 1e-9 # rising diagonal 0.008 in
|
||||
|
||||
|
||||
def test_limit_clamps_below_1hz():
|
||||
assert limit_at(0.1) == limit_at(1.0)
|
||||
|
||||
|
||||
def test_scatter_ceiling_is_ppv_at_dominant_freq():
|
||||
# ~27 Hz blast-like trace whose energy peaks mid-record (inside full cycles,
|
||||
# as a real event does): the scatter cloud's ceiling is the trace PPV and the
|
||||
# top point sits near the dominant frequency.
|
||||
sps, n = 1024.0, 3328
|
||||
t = np.arange(n) / sps
|
||||
env = np.exp(-((t - 1.5) ** 2) / (2 * 0.3 ** 2))
|
||||
x = 0.9 * env * np.sin(2 * np.pi * 27.0 * t)
|
||||
f, v = channel_compliance_points(x, sps)
|
||||
assert len(f) > 20
|
||||
assert v.max() >= 0.99 * np.abs(x).max()
|
||||
assert 20.0 < f[int(np.argmax(v))] < 35.0
|
||||
@@ -0,0 +1,71 @@
|
||||
"""The event .h5 carries the sensor self-check traces (schema v2).
|
||||
|
||||
The sensor check is decoded by the per-series decoder and attached to the
|
||||
standardized Event, so the .h5 writer persists it device-agnostically and SFM
|
||||
reads it back without knowing which instrument produced it. Old v1 files (no
|
||||
sensor_check group) must still read cleanly.
|
||||
"""
|
||||
import tempfile
|
||||
from pathlib import Path
|
||||
|
||||
import numpy as np
|
||||
|
||||
from minimateplus.models import Event
|
||||
from minimateplus.event_file_io import read_blastware_file
|
||||
from sfm import event_hdf5
|
||||
|
||||
S3_FIX = Path(__file__).parent / "fixtures" / "fft-oracle-2026-09-14" / "N844LQHB.ZT0W"
|
||||
|
||||
|
||||
def _write(ev, **kw):
|
||||
d = Path(tempfile.mkdtemp())
|
||||
p = d / "e.h5"
|
||||
event_hdf5.write_event_hdf5(p, ev, serial="BE12844", **kw)
|
||||
return p
|
||||
|
||||
|
||||
def test_sensor_check_roundtrips_through_hdf5():
|
||||
ev = Event(index=0)
|
||||
ev.raw_samples = {"Tran": [1, 2, -3], "Vert": [0, 1], "Long": [2], "MicL": [5, -5]}
|
||||
ev.sample_rate = 1024
|
||||
sc = {"Tran": [0, -990, -500, -100], "Vert": [0, -980, -480],
|
||||
"Long": [0, -986, -470], "MicL": [0, -1800, 1800, -1800]}
|
||||
ev.sensor_check = sc
|
||||
|
||||
r = event_hdf5.read_event_hdf5(_write(ev))
|
||||
assert r["schema_version"] == 2
|
||||
assert set(r["sensor_check"]) == {"Tran", "Vert", "Long", "MicL"}
|
||||
for ch, vals in sc.items():
|
||||
assert r["sensor_check"][ch].tolist() == vals
|
||||
|
||||
|
||||
def test_plot_json_carries_sensor_check():
|
||||
ev = Event(index=0)
|
||||
ev.raw_samples = {"Tran": [1, 2, 3]}
|
||||
ev.sample_rate = 1024
|
||||
ev.sensor_check = {"Tran": [0, -990, -500], "Vert": [0, -980],
|
||||
"Long": [0, -986]} # 3-channel: no MicL
|
||||
pj = event_hdf5.plot_json_from_hdf5(_write(ev))
|
||||
assert pj["sensor_check"] is not None
|
||||
assert "MicL" not in pj["sensor_check"]
|
||||
assert pj["sensor_check"]["Tran"] == [0, -990, -500]
|
||||
|
||||
|
||||
def test_event_without_sensor_check_still_reads_as_v2():
|
||||
ev = Event(index=0)
|
||||
ev.raw_samples = {"Tran": [1, 2, 3]}
|
||||
ev.sample_rate = 1024
|
||||
r = event_hdf5.read_event_hdf5(_write(ev))
|
||||
assert r["schema_version"] == 2
|
||||
assert r["sensor_check"] is None
|
||||
assert event_hdf5.plot_json_from_hdf5(_write(ev))["sensor_check"] is None
|
||||
|
||||
|
||||
def test_series3_decode_populates_event_sensor_check():
|
||||
# The real series-3 decoder attaches the traces to the Event, so the
|
||||
# ingest/backfill .h5 write picks them up with no extra plumbing.
|
||||
ev = read_blastware_file(S3_FIX)
|
||||
assert ev.sensor_check is not None
|
||||
assert set(ev.sensor_check) == {"Tran", "Vert", "Long", "MicL"}
|
||||
tran = np.asarray(ev.sensor_check["Tran"], dtype=float)
|
||||
assert tran.min() < -800 # the geophone ring-down deflection
|
||||
+57
-19
@@ -1,33 +1,71 @@
|
||||
import datetime
|
||||
import sqlite3
|
||||
from sfm.database import SeismoDb
|
||||
from minimateplus.models import Event, Timestamp
|
||||
|
||||
|
||||
def _ins(db, key, serial, pvs, ts):
|
||||
def _ins(db, key, serial, pvs, ts, record_type="Waveform"):
|
||||
ev = Event(index=0)
|
||||
ev._waveform_key = bytes.fromhex(key)
|
||||
ev.timestamp = ts
|
||||
# peak_vector_sum comes from peak_values; simplest: insert then UPDATE pvs directly
|
||||
db.insert_events([ev], serial=serial)
|
||||
row = [r for r in db.query_events(serial=serial) if r["waveform_key"] == key][0]
|
||||
import sqlite3
|
||||
with sqlite3.connect(db.db_path) as c:
|
||||
c.execute("UPDATE events SET peak_vector_sum=? WHERE id=?", (pvs, row["id"]))
|
||||
c.execute("UPDATE events SET peak_vector_sum=?, record_type=? WHERE id=?",
|
||||
(pvs, record_type, row["id"]))
|
||||
return row["id"]
|
||||
|
||||
|
||||
def test_find_twins_matches_same_serial_pvs_near_time(tmp_path):
|
||||
def _ts(hour, minute, second=0, day=25):
|
||||
return Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0, month=2, day=day,
|
||||
hour=hour, minute=minute, second=second)
|
||||
|
||||
|
||||
def test_histogram_and_waveform_twin_across_hours(tmp_path):
|
||||
# The real UM12947 case: histogram stamped at its 7pm interval start, the
|
||||
# triggered waveform 75 min later — same serial + identical PVS. The old
|
||||
# ±5-min window missed this; interval matching catches it, both directions.
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
base = Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0, month=2, day=25, hour=20, minute=19, second=5)
|
||||
twin = Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0, month=2, day=25, hour=20, minute=19, second=45)
|
||||
far = Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0, month=2, day=25, hour=21, minute=0, second=0)
|
||||
# d needs a timestamp distinct from `twin` (UNIQUE(serial, timestamp) would
|
||||
# otherwise collide with b and UPSERT onto its row instead of inserting a
|
||||
# new one) while staying near `base` in time.
|
||||
near = Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0, month=2, day=25, hour=20, minute=19, second=44)
|
||||
a = _ins(db, "01110001", "BE1", 0.4763, base)
|
||||
b = _ins(db, "01110002", "BE1", 0.4763, twin) # twin: same serial+pvs, 40s apart
|
||||
c = _ins(db, "01110003", "BE1", 0.4763, far) # same pvs but >window away
|
||||
d = _ins(db, "01110004", "BE1", 0.9999, near) # near time but different pvs
|
||||
ids = {r["id"] for r in db.find_twins(a, window_seconds=300)}
|
||||
assert ids == {b}
|
||||
hist_pm = _ins(db, "01110001", "BE1", 0.4763, _ts(19, 31, 17), "Histogram")
|
||||
wave = _ins(db, "01110002", "BE1", 0.4763, _ts(20, 46, 44), "Waveform")
|
||||
_ins(db, "01110003", "BE1", 0.0100, _ts(7, 0, 0, day=26), "Histogram") # bounds the interval
|
||||
assert {r["id"] for r in db.find_twins(hist_pm)} == {wave}
|
||||
assert {r["id"] for r in db.find_twins(wave)} == {hist_pm}
|
||||
|
||||
|
||||
def test_same_type_not_twinned(tmp_path):
|
||||
# Two waveforms, same serial + PVS, seconds apart → NOT twins (cross-type only).
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
a = _ins(db, "01110001", "BE1", 0.4763, _ts(20, 19, 5), "Waveform")
|
||||
_ins(db, "01110002", "BE1", 0.4763, _ts(20, 19, 45), "Waveform")
|
||||
assert db.find_twins(a) == []
|
||||
|
||||
|
||||
def test_waveform_matches_only_the_containing_interval(tmp_path):
|
||||
# Two overnight intervals with the same PVS; a waveform in the SECOND interval
|
||||
# must twin with that histogram, never the first — even though PVS matches both.
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
h1 = _ins(db, "01110001", "BE1", 0.4763, _ts(19, 0, 0, day=25), "Histogram")
|
||||
h2 = _ins(db, "01110002", "BE1", 0.4763, _ts(7, 0, 0, day=26), "Histogram")
|
||||
w = _ins(db, "01110003", "BE1", 0.4763, _ts(8, 0, 0, day=26), "Waveform")
|
||||
assert {r["id"] for r in db.find_twins(w)} == {h2}
|
||||
assert w not in {r["id"] for r in db.find_twins(h1)}
|
||||
|
||||
|
||||
def test_different_pvs_not_twinned(tmp_path):
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
h = _ins(db, "01110001", "BE1", 0.4763, _ts(19, 0, 0), "Histogram")
|
||||
_ins(db, "01110002", "BE1", 0.9999, _ts(20, 0, 0), "Waveform") # different PVS
|
||||
assert db.find_twins(h) == []
|
||||
|
||||
|
||||
def test_open_ended_latest_interval(tmp_path):
|
||||
# A waveform after the latest histogram (nothing bounds the interval) still twins.
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
h = _ins(db, "01110001", "BE1", 0.4763, _ts(19, 0, 0), "Histogram")
|
||||
w = _ins(db, "01110002", "BE1", 0.4763, _ts(23, 30, 0), "Waveform")
|
||||
assert {r["id"] for r in db.find_twins(h)} == {w}
|
||||
|
||||
|
||||
def test_missing_fields_returns_empty(tmp_path):
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
assert db.find_twins("nonexistent-id") == []
|
||||
|
||||
@@ -0,0 +1,103 @@
|
||||
import sqlite3
|
||||
|
||||
from sfm.database import SeismoDb
|
||||
from minimateplus.models import Event, Timestamp
|
||||
|
||||
|
||||
def _ev(db, key="0111aaaa", serial="BE1"):
|
||||
ev = Event(index=0)
|
||||
ev._waveform_key = bytes.fromhex(key)
|
||||
ev.timestamp = Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0,
|
||||
month=6, day=25, hour=8, minute=0, second=0)
|
||||
ev.record_type = "Waveform"
|
||||
db.insert_events([ev], serial=serial)
|
||||
return [r for r in db.query_events(serial=serial) if r["waveform_key"] == key][0]["id"]
|
||||
|
||||
|
||||
def test_flag_offset_reason_implies_ft(tmp_path):
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
eid = _ev(db)
|
||||
db.update_event_review(eid, {"false_trigger_reason": "offset"})
|
||||
row = db.get_event(eid)
|
||||
assert row["false_trigger"] == 1 # a reason is a subtype of FT
|
||||
assert row["false_trigger_reason"] == "offset"
|
||||
assert row["reviewed_real"] == 0
|
||||
|
||||
|
||||
def test_plain_ft_leaves_reason_null(tmp_path):
|
||||
# Reason is OPTIONAL — flagging FT without one records no reason.
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
eid = _ev(db)
|
||||
db.update_event_review(eid, {"false_trigger": True})
|
||||
row = db.get_event(eid)
|
||||
assert row["false_trigger"] == 1
|
||||
assert row["false_trigger_reason"] is None
|
||||
|
||||
|
||||
def test_confirm_real_clears_reason(tmp_path):
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
eid = _ev(db)
|
||||
db.update_event_review(eid, {"false_trigger_reason": "offset"})
|
||||
db.update_event_review(eid, {"reviewed_real": True})
|
||||
row = db.get_event(eid)
|
||||
assert row["reviewed_real"] == 1
|
||||
assert row["false_trigger"] == 0
|
||||
assert row["false_trigger_reason"] is None
|
||||
|
||||
|
||||
def test_clear_ft_clears_reason(tmp_path):
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
eid = _ev(db)
|
||||
db.update_event_review(eid, {"false_trigger_reason": "offset"})
|
||||
db.update_event_review(eid, {"false_trigger": False})
|
||||
row = db.get_event(eid)
|
||||
assert row["false_trigger"] == 0
|
||||
assert row["false_trigger_reason"] is None
|
||||
|
||||
|
||||
def test_set_false_trigger_false_clears_reason(tmp_path):
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
eid = _ev(db)
|
||||
db.update_event_review(eid, {"false_trigger_reason": "offset"})
|
||||
assert db.set_false_trigger(eid, False) is True
|
||||
row = db.get_event(eid)
|
||||
assert row["false_trigger"] == 0
|
||||
assert row["false_trigger_reason"] is None
|
||||
|
||||
|
||||
def test_reason_can_be_cleared_without_clearing_ft(tmp_path):
|
||||
# Setting reason to None removes the reason but leaves the FT flag intact.
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
eid = _ev(db)
|
||||
db.update_event_review(eid, {"false_trigger_reason": "offset"})
|
||||
db.update_event_review(eid, {"false_trigger_reason": None})
|
||||
row = db.get_event(eid)
|
||||
assert row["false_trigger"] == 1
|
||||
assert row["false_trigger_reason"] is None
|
||||
|
||||
|
||||
def _ts(h, m, d=25):
|
||||
return Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0,
|
||||
month=2, day=d, hour=h, minute=m, second=0)
|
||||
|
||||
|
||||
def test_offset_reason_propagates_to_twin(tmp_path):
|
||||
# Flag a waveform as offset → its histogram twin also becomes FT with reason=offset.
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
|
||||
def ins(key, ts, rt):
|
||||
ev = Event(index=0); ev._waveform_key = bytes.fromhex(key); ev.timestamp = ts
|
||||
db.insert_events([ev], serial="BE1")
|
||||
rid = [r for r in db.query_events(serial="BE1") if r["waveform_key"] == key][0]["id"]
|
||||
with sqlite3.connect(db.db_path) as c:
|
||||
c.execute("UPDATE events SET peak_vector_sum=0.4763, record_type=? WHERE id=?", (rt, rid))
|
||||
return rid
|
||||
|
||||
hist = ins("01110001", _ts(19, 31), "Histogram") # interval start
|
||||
wave = ins("01110002", _ts(20, 46), "Waveform") # trigger inside the interval
|
||||
|
||||
db.update_event_review(wave, {"false_trigger_reason": "offset"})
|
||||
db.propagate_review_to_twins(wave)
|
||||
row = db.get_event(hist)
|
||||
assert row["false_trigger"] == 1
|
||||
assert row["false_trigger_reason"] == "offset"
|
||||
@@ -0,0 +1,17 @@
|
||||
"""The /health version must track the release, not a stale literal.
|
||||
|
||||
terra-view's SFM Admin page displays whatever `/health` reports. It was
|
||||
hardcoded to "0.1.0" and never bumped, so the page showed 0.1.0 while the
|
||||
service was actually 0.26.0. These guard against that regression — and run
|
||||
without httpx (they call the endpoint function directly, no TestClient).
|
||||
"""
|
||||
from minimateplus.event_file_io import TOOL_VERSION
|
||||
from sfm.server import app, health
|
||||
|
||||
|
||||
def test_health_reports_current_tool_version():
|
||||
assert health()["version"] == TOOL_VERSION
|
||||
|
||||
|
||||
def test_openapi_version_matches_tool_version():
|
||||
assert app.version == TOOL_VERSION
|
||||
@@ -643,3 +643,38 @@ def test_multi_interval_matches_blastware_ascii_exactly():
|
||||
assert hz is None
|
||||
elif not cell.startswith("<"):
|
||||
assert hz is not None and abs(hz - float(cell)) <= max(0.55, float(cell) * 0.02)
|
||||
|
||||
|
||||
def test_partial_final_block_is_not_disqualified_by_missing_third_header():
|
||||
"""A body can exceed two strides yet hold only two real blocks.
|
||||
|
||||
Regression for BE18193 `T193L0XM.CI0H` — 51 intervals at 2 s = one full
|
||||
30-interval block plus a 21-interval remainder, in a body long enough to
|
||||
demand a third block header at ``2 * stride`` that does not exist. The
|
||||
third-block confirmation used to be mandatory whenever the body was long
|
||||
enough, so the correct stride was discarded and the file decoded to
|
||||
nothing. A missing third header means end-of-stream, not disqualification;
|
||||
the block-counter check is the decisive anti-false-positive test.
|
||||
"""
|
||||
full = [(1, 1, 2, 2, 3, 3, 4, 4)] * 30
|
||||
partial = [(5, 5, 6, 6, 7, 7, 8, 8)] * 21
|
||||
body = (_mk_multi_block(full, ctr=256)
|
||||
+ _mk_multi_block(partial, ctr=257)
|
||||
+ b"\xff" * 700) # trailing padding past 2 * stride
|
||||
stride = 12 + 20 * 30
|
||||
assert 2 * stride + 6 <= len(body), "padding must reach past two strides"
|
||||
# the whole point: a third header is absent, and that must not disqualify
|
||||
assert detect_multi_interval_stride(body) == stride
|
||||
recs = walk_multi_interval_blocks(body)
|
||||
assert len(recs) == 51
|
||||
assert recs[0]["t_peak"] == 1
|
||||
assert recs[-1]["t_peak"] == 5
|
||||
|
||||
|
||||
def test_third_block_still_rejects_a_mismatched_counter():
|
||||
"""The corroboration must still bite when a third block IS present."""
|
||||
ivs = [(1, 1, 2, 2, 3, 3, 4, 4)] * 4
|
||||
body = (_mk_multi_block(ivs, ctr=256)
|
||||
+ _mk_multi_block(ivs, ctr=257)
|
||||
+ _mk_multi_block(ivs, ctr=999)) # counter jumps — not consecutive
|
||||
assert detect_multi_interval_stride(body) != 12 + 20 * 4
|
||||
|
||||
@@ -0,0 +1,322 @@
|
||||
"""Per-sample verification of the Thor / Micromate (series-4) IDF binary codec.
|
||||
|
||||
Ground truth is Thor's own CSV export, written next to each binary by the
|
||||
Thor desktop application. For waveforms the export carries a per-sample
|
||||
block of four columns (Tran, Vert, Long, Mic) in in/s and psi -- the
|
||||
series-4 equivalent of Blastware's ``_ASCII.TXT`` exports.
|
||||
|
||||
The full-corpus harness is ``scratch/verify_thor_against_csv.py``; these
|
||||
tests pin the two constants that harness established so they cannot
|
||||
regress silently.
|
||||
"""
|
||||
from __future__ import annotations
|
||||
|
||||
import csv
|
||||
import os
|
||||
import sys
|
||||
from pathlib import Path
|
||||
|
||||
import pytest
|
||||
|
||||
sys.path.insert(0, os.path.dirname(os.path.dirname(os.path.abspath(__file__))))
|
||||
|
||||
from micromate.idf_file import (
|
||||
_GEO_LSB_IPS,
|
||||
geo_count_to_ips,
|
||||
read_idf_file,
|
||||
)
|
||||
|
||||
FIXTURES = Path(__file__).parent / "fixtures" / "thor-idf"
|
||||
IDFW = FIXTURES / "UM11719_20231219162723.IDFW"
|
||||
IDFH = FIXTURES / "UM11719_20231219162648.IDFH"
|
||||
|
||||
GEO_CHANNELS = ("Tran", "Vert", "Long")
|
||||
|
||||
# tests/fixtures/ is gitignored, so a fresh checkout has no sample data.
|
||||
# Skip rather than fail, matching test_idf_ascii_report.py. To populate:
|
||||
#
|
||||
# B="<thor-watcher>/example-data/THORDATA_example/THORDATA_example/UPMC Presby"
|
||||
# mkdir -p tests/fixtures/thor-idf
|
||||
# for f in UM11719/UM11719_20231219162723.IDFW \
|
||||
# UM11719/UM11719_20231219162648.IDFH \
|
||||
# UM13981/UM13981_20220207084555.IDFW \
|
||||
# UM13981/UM13981_20220207183102.IDFH \
|
||||
# UM13981/UM13981_20221202063059.IDFH; do
|
||||
# cp "$B/$f" tests/fixtures/thor-idf/
|
||||
# cp "$B/$(dirname $f)/CSV/$(basename $f).csv" tests/fixtures/thor-idf/
|
||||
# done
|
||||
pytestmark = pytest.mark.skipif(
|
||||
not FIXTURES.is_dir() or not any(FIXTURES.glob("*.IDFW")),
|
||||
reason=f"Thor IDF fixtures not present under {FIXTURES}",
|
||||
)
|
||||
|
||||
|
||||
def _parse_export(path: Path):
|
||||
"""Split a Thor CSV export into (header dict, per-sample rows)."""
|
||||
header, rows = {}, []
|
||||
with path.open(newline="", encoding="utf-8", errors="replace") as fh:
|
||||
for rec in csv.reader(fh):
|
||||
if len(rec) == 2:
|
||||
header[rec[0].strip()] = rec[1].strip()
|
||||
elif len(rec) >= 3:
|
||||
try:
|
||||
rows.append([float(x) for x in rec])
|
||||
except ValueError:
|
||||
pass
|
||||
return header, rows
|
||||
|
||||
|
||||
def _header_float(header, key):
|
||||
return float(header[key].split()[0])
|
||||
|
||||
|
||||
@pytest.fixture(scope="module")
|
||||
def idfw_export():
|
||||
return _parse_export(IDFW.with_suffix(".IDFW.csv"))
|
||||
|
||||
|
||||
# ─── The geo scale constant ────────────────────────────────────────────────
|
||||
|
||||
|
||||
def test_geo_lsb_matches_thor_quantisation():
|
||||
"""Thor's own export quantises geo samples to this LSB.
|
||||
|
||||
Derived by maximising exact-match count over 1,046,016 paired samples
|
||||
(454 channel-events, 2 units); independently corroborated on 8
|
||||
production units via their device-reported PPV. The historical value
|
||||
0.0003 read every series-4 geophone sample 3.3% low.
|
||||
"""
|
||||
assert _GEO_LSB_IPS == pytest.approx(0.000310308, rel=1e-6)
|
||||
|
||||
|
||||
def test_geo_lsb_is_not_the_legacy_value():
|
||||
# Guards against a revert to the truncated 0.0003 constant.
|
||||
assert abs(_GEO_LSB_IPS - 0.0003) > 1e-6
|
||||
|
||||
|
||||
# ─── Per-sample fidelity ───────────────────────────────────────────────────
|
||||
|
||||
|
||||
def test_waveform_channel_lengths_match_export(idfw_export):
|
||||
_header, rows = idfw_export
|
||||
result = read_idf_file(IDFW)
|
||||
for channel in GEO_CHANNELS:
|
||||
assert len(result.samples[channel]) == len(rows), (
|
||||
f"{channel} truncated: decoded {len(result.samples[channel])} "
|
||||
f"samples, export has {len(rows)}"
|
||||
)
|
||||
|
||||
|
||||
def test_waveform_samples_match_export_exactly(idfw_export):
|
||||
"""Every geo sample must reproduce Thor's exported value to 4 dp."""
|
||||
_header, rows = idfw_export
|
||||
result = read_idf_file(IDFW)
|
||||
for index, channel in enumerate(GEO_CHANNELS):
|
||||
decoded = result.samples[channel]
|
||||
expected = [row[index] for row in rows]
|
||||
mismatches = [
|
||||
(i, geo_count_to_ips(c), v)
|
||||
for i, (c, v) in enumerate(zip(decoded, expected))
|
||||
if abs(geo_count_to_ips(c) - v) >= 5e-5
|
||||
]
|
||||
assert not mismatches, (
|
||||
f"{channel}: {len(mismatches)} of {len(expected)} samples differ; "
|
||||
f"first three {mismatches[:3]}"
|
||||
)
|
||||
|
||||
|
||||
def test_waveform_ppv_matches_export(idfw_export):
|
||||
header, _rows = idfw_export
|
||||
result = read_idf_file(IDFW)
|
||||
for channel, attr in (
|
||||
("Tran", "transverse_ips"),
|
||||
("Vert", "vertical_ips"),
|
||||
("Long", "longitudinal_ips"),
|
||||
):
|
||||
decoded = getattr(result.event.peaks, attr)
|
||||
assert decoded == pytest.approx(
|
||||
_header_float(header, f"{channel}PPV"), abs=5e-5
|
||||
), f"{channel} PPV disagrees with Thor's export"
|
||||
|
||||
|
||||
# ─── Histogram path shares the same scale ──────────────────────────────────
|
||||
|
||||
|
||||
def test_histogram_peaks_match_export():
|
||||
header, _rows = _parse_export(IDFH.with_suffix(".IDFH.csv"))
|
||||
result = read_idf_file(IDFH)
|
||||
assert result.intervals, "IDFH decoded no intervals"
|
||||
for channel, attr in (
|
||||
("Tran", "transverse_ips"),
|
||||
("Vert", "vertical_ips"),
|
||||
("Long", "longitudinal_ips"),
|
||||
):
|
||||
decoded = getattr(result.event.peaks, attr)
|
||||
expected = _header_float(header, f"{channel}PPV")
|
||||
# Histogram peaks are stored per-interval, so the export's PPV is
|
||||
# reproduced within one quantisation step rather than exactly.
|
||||
assert decoded == pytest.approx(expected, abs=2 * _GEO_LSB_IPS), (
|
||||
f"{channel} histogram peak {decoded} vs export {expected}"
|
||||
)
|
||||
|
||||
|
||||
# ─── Regressions found 2026-09-10 ──────────────────────────────────────────
|
||||
|
||||
IDFH_LONG = FIXTURES / "UM13981_20220207183102.IDFH" # 719 intervals
|
||||
IDFH_SENTINEL = FIXTURES / "UM13981_20221202063059.IDFH" # holds an unwritten slot
|
||||
IDFW_RAW16 = FIXTURES / "UM13981_20220207084555.IDFW" # segment 0 is MODE_RAW16
|
||||
|
||||
|
||||
def test_histogram_decodes_past_250_intervals():
|
||||
"""The segment validator must not require a zero counter high byte.
|
||||
|
||||
The interval counter is a uint16 cumulative index. Requiring its high
|
||||
byte to be zero rejected every segment past interval 255, capping each
|
||||
histogram at 250 intervals and truncating any run longer than ~4 hours —
|
||||
frequently discarding the part that held the peak.
|
||||
"""
|
||||
result = read_idf_file(IDFH_LONG)
|
||||
header, _rows = _parse_export(IDFH_LONG.with_suffix(".IDFH.csv"))
|
||||
expected = float(header["NumberOfIntervals"])
|
||||
assert len(result.intervals) == 719
|
||||
assert len(result.intervals) == pytest.approx(expected, abs=1.0)
|
||||
|
||||
|
||||
def test_histogram_ignores_unwritten_interval_slot():
|
||||
"""A never-written interval keeps its ±full-scale seed and must be dropped.
|
||||
|
||||
Counting it fabricates a 10.0 in/s peak on every channel, which then wins
|
||||
the max-over-intervals and poisons the whole file's PPV.
|
||||
"""
|
||||
header, _rows = _parse_export(IDFH_SENTINEL.with_suffix(".IDFH.csv"))
|
||||
result = read_idf_file(IDFH_SENTINEL)
|
||||
for channel, attr in (
|
||||
("Tran", "transverse_ips"),
|
||||
("Vert", "vertical_ips"),
|
||||
("Long", "longitudinal_ips"),
|
||||
):
|
||||
decoded = getattr(result.event.peaks, attr)
|
||||
assert decoded < 1.0, f"{channel} peak {decoded} looks like the ±FS seed"
|
||||
assert decoded == pytest.approx(
|
||||
_header_float(header, f"{channel}PPV"), abs=2 * _GEO_LSB_IPS
|
||||
)
|
||||
|
||||
|
||||
def test_waveform_raw16_segment_zero_is_decoded():
|
||||
"""Segment-0 records can be raw int16 (MODE_RAW16, 10-byte header).
|
||||
|
||||
That mode was absent from the dispatch, so the record fell through
|
||||
unhandled and the channel silently lost its first 512 samples.
|
||||
"""
|
||||
rows = _parse_export(IDFW_RAW16.with_suffix(".IDFW.csv"))[1]
|
||||
result = read_idf_file(IDFW_RAW16)
|
||||
for index, channel in enumerate(GEO_CHANNELS):
|
||||
decoded = result.samples[channel]
|
||||
assert len(decoded) == len(rows), f"{channel} lost segment 0"
|
||||
expected = [row[index] for row in rows]
|
||||
bad = sum(
|
||||
1 for c, v in zip(decoded, expected)
|
||||
if abs(geo_count_to_ips(c) - v) >= 5e-5
|
||||
)
|
||||
assert bad == 0, f"{channel}: {bad} samples differ from Thor's export"
|
||||
|
||||
|
||||
def test_body_offset_search_is_not_quadratic():
|
||||
"""The body scan must stay cheap enough for bulk ingest.
|
||||
|
||||
MODE_RAW16 is (0x00, 0x00), so scanning for candidate *preambles* treats
|
||||
every run of three zero bytes as a body start and trial-decodes each one
|
||||
(~0.5 s/file measured). The search anchors on record headers instead.
|
||||
"""
|
||||
import time
|
||||
|
||||
start = time.perf_counter()
|
||||
for _ in range(3):
|
||||
read_idf_file(IDFW_RAW16)
|
||||
elapsed = (time.perf_counter() - start) / 3
|
||||
assert elapsed < 0.15, f"body-offset search took {elapsed*1000:.0f} ms/file"
|
||||
|
||||
|
||||
# ─── Mic-disabled (3-channel) units, found 2026-09-10 ──────────────────────
|
||||
|
||||
IDFW_3CH = FIXTURES / "UM20147_20250531135901.IDFW" # body head below old floor
|
||||
IDFH_3CH = FIXTURES / "UM20147_20250330070110.IDFH" # 56-byte interval records
|
||||
|
||||
|
||||
def test_three_channel_waveform_decodes_all_geo_channels():
|
||||
"""A mic-disabled unit's shorter header moves the record chain head.
|
||||
|
||||
Its head sits at 0x0dba, below the old ``_BODY_SCAN_FLOOR`` of 0x0E00, so
|
||||
the scan could not see it and fell through to the *Vert* segment-0 record
|
||||
— decoding a body shifted one position around the channel rotation, which
|
||||
surfaced as Vert being exactly 512 samples short.
|
||||
"""
|
||||
rows = _parse_export(IDFW_3CH.with_suffix(".IDFW.csv"))[1]
|
||||
result = read_idf_file(IDFW_3CH)
|
||||
for index, channel in enumerate(GEO_CHANNELS):
|
||||
decoded = result.samples[channel]
|
||||
assert len(decoded) == len(rows), (
|
||||
f"{channel}: {len(decoded)} samples, export has {len(rows)}"
|
||||
)
|
||||
expected = [row[index] for row in rows]
|
||||
bad = sum(
|
||||
1 for c, v in zip(decoded, expected)
|
||||
if abs(geo_count_to_ips(c) - v) >= 5e-5
|
||||
)
|
||||
assert bad == 0, f"{channel}: {bad} samples differ from Thor's export"
|
||||
# Mic is genuinely absent on these units, not merely undecoded.
|
||||
assert not result.samples.get("MicL")
|
||||
|
||||
|
||||
def test_three_channel_histogram_uses_56_byte_intervals():
|
||||
"""Interval stride is 16 bytes per channel + an 8-byte tail, not a constant.
|
||||
|
||||
A mic-disabled unit packs 56-byte records, so assuming 72 read 7 intervals
|
||||
out of every 10-interval segment and then walked off alignment into
|
||||
garbage, which decoded as ~10 in/s peaks. The true count comes from the
|
||||
segment's cumulative interval counter.
|
||||
"""
|
||||
header, _rows = _parse_export(IDFH_3CH.with_suffix(".IDFH.csv"))
|
||||
result = read_idf_file(IDFH_3CH)
|
||||
expected_intervals = float(header["NumberOfIntervals"])
|
||||
assert len(result.intervals) == pytest.approx(expected_intervals, abs=1.0)
|
||||
assert {iv.n_channels for iv in result.intervals} == {3}
|
||||
for channel, attr in (
|
||||
("Tran", "transverse_ips"),
|
||||
("Vert", "vertical_ips"),
|
||||
("Long", "longitudinal_ips"),
|
||||
):
|
||||
decoded = getattr(result.event.peaks, attr)
|
||||
assert decoded < 1.0, f"{channel} peak {decoded} looks like walked-off garbage"
|
||||
assert decoded == pytest.approx(
|
||||
_header_float(header, f"{channel}PPV"), rel=0.02
|
||||
)
|
||||
|
||||
|
||||
# ─── `40 NN` blocks with NN > 8, verified 2026-09-11 ───────────────────────
|
||||
|
||||
IDFW_WIDE40 = FIXTURES / "UM12947_20250806134504.IDFW"
|
||||
|
||||
|
||||
def test_wide_forty_nn_block_does_not_truncate_channels():
|
||||
"""Loud events use `40 NN` blocks with NN well above the old cap of 8.
|
||||
|
||||
``data_block_len()`` rejected NN > 0x08, which halted the block walk
|
||||
part-way through a record. The walker stops at the first unrecognised
|
||||
tag instead of raising, so this surfaced as silently short channels —
|
||||
here Tran 1812 / Vert 2132 / Long 2324 where the export has 2324 for all
|
||||
three. The affected files use NN of 12, 16, 20 ... up to 196.
|
||||
"""
|
||||
rows = _parse_export(IDFW_WIDE40.with_suffix(".IDFW.csv"))[1]
|
||||
result = read_idf_file(IDFW_WIDE40)
|
||||
for index, channel in enumerate(GEO_CHANNELS):
|
||||
decoded = result.samples[channel]
|
||||
assert len(decoded) == len(rows), (
|
||||
f"{channel}: {len(decoded)} samples, export has {len(rows)}"
|
||||
)
|
||||
expected = [row[index] for row in rows]
|
||||
bad = sum(
|
||||
1 for c, v in zip(decoded, expected)
|
||||
if abs(geo_count_to_ips(c) - v) >= 5e-5
|
||||
)
|
||||
assert bad == 0, f"{channel}: {bad} samples differ from Thor's export"
|
||||
@@ -0,0 +1,94 @@
|
||||
import numpy as np
|
||||
import h5py
|
||||
from sfm.shape_metrics import offset_from_samples, offset_from_h5
|
||||
|
||||
|
||||
def test_flags_constant_dc_floor():
|
||||
# A geophone channel sitting at a constant +0.05 in/s across the whole record
|
||||
# is a DC offset: baseline off zero AND flat across pre/mid/end thirds.
|
||||
n = 300
|
||||
chans = {"Tran": np.full(n, 0.05), "Vert": np.zeros(n), "Long": np.zeros(n)}
|
||||
r = offset_from_samples(chans, pretrig_n=50)
|
||||
assert r["offset"] is True
|
||||
assert r["axis"] == "Tran"
|
||||
assert abs(r["pre"] - 0.05) < 1e-6
|
||||
assert r["spread"] < 0.02
|
||||
|
||||
|
||||
def test_transient_rejected_by_spread():
|
||||
# Off-zero pre-trigger but the baseline SETTLES back over the record — a
|
||||
# transient, not a constant offset. The spread test must reject it.
|
||||
x = np.concatenate([np.full(100, 0.05), np.full(100, 0.025), np.zeros(100)])
|
||||
chans = {"Tran": x, "Vert": np.zeros(300), "Long": np.zeros(300)}
|
||||
r = offset_from_samples(chans, pretrig_n=100)
|
||||
assert r["offset"] is False
|
||||
|
||||
|
||||
def test_clean_oscillation_not_offset():
|
||||
t = np.arange(300)
|
||||
x = 0.4 * np.sin(2 * np.pi * t / 20) # oscillates around zero — baseline IS zero
|
||||
chans = {"Tran": x, "Vert": np.zeros(300), "Long": np.zeros(300)}
|
||||
r = offset_from_samples(chans, pretrig_n=50)
|
||||
assert r["offset"] is False
|
||||
|
||||
|
||||
def test_below_floor_not_offset_but_reports_pre():
|
||||
# A flat baseline below the floor is not an offset; still report the axis/pre
|
||||
# for tuning transparency.
|
||||
n = 300
|
||||
chans = {"Tran": np.full(n, 0.01), "Vert": np.zeros(n), "Long": np.zeros(n)}
|
||||
r = offset_from_samples(chans, pretrig_n=50)
|
||||
assert r["offset"] is False
|
||||
assert r["axis"] == "Tran"
|
||||
assert abs(r["pre"] - 0.01) < 1e-6
|
||||
|
||||
|
||||
def test_none_when_no_geo_channels():
|
||||
assert offset_from_samples({"MicL": np.full(300, 0.05)}, pretrig_n=50) is None
|
||||
|
||||
|
||||
def test_pretrig_fallback_when_invalid():
|
||||
# pretrig_n of 0 (missing/unusable) falls back to the first third.
|
||||
n = 300
|
||||
chans = {"Tran": np.full(n, 0.05), "Vert": np.zeros(n), "Long": np.zeros(n)}
|
||||
r = offset_from_samples(chans, pretrig_n=0)
|
||||
assert r["offset"] is True
|
||||
|
||||
|
||||
def test_flags_offset_on_any_axis():
|
||||
# Offset on Vert alone still flags the event, and Vert is reported.
|
||||
n = 300
|
||||
chans = {"Tran": np.zeros(n), "Vert": np.full(n, -0.06), "Long": np.zeros(n)}
|
||||
r = offset_from_samples(chans, pretrig_n=50)
|
||||
assert r["offset"] is True
|
||||
assert r["axis"] == "Vert"
|
||||
|
||||
|
||||
def _write_h5(path, chans, pretrig_n):
|
||||
with h5py.File(path, "w") as f:
|
||||
g = f.create_group("samples")
|
||||
for k, v in chans.items():
|
||||
g.create_dataset(k, data=np.asarray(v, dtype="float32"))
|
||||
if pretrig_n is not None:
|
||||
f.attrs["pretrig_samples"] = pretrig_n
|
||||
|
||||
|
||||
def test_offset_from_h5_reads_pretrig_attr(tmp_path):
|
||||
p = tmp_path / "ev.h5"
|
||||
n = 300
|
||||
_write_h5(p, {"Tran": np.full(n, 0.05), "Vert": np.zeros(n), "Long": np.zeros(n)},
|
||||
pretrig_n=50)
|
||||
r = offset_from_h5(str(p))
|
||||
assert r["offset"] is True and r["axis"] == "Tran"
|
||||
|
||||
|
||||
def test_offset_from_h5_missing_pretrig_attr_falls_back(tmp_path):
|
||||
p = tmp_path / "noattr.h5"
|
||||
n = 300
|
||||
_write_h5(p, {"Tran": np.full(n, 0.05), "Vert": np.zeros(n), "Long": np.zeros(n)},
|
||||
pretrig_n=None)
|
||||
assert offset_from_h5(str(p))["offset"] is True # falls back to first-third
|
||||
|
||||
|
||||
def test_offset_from_h5_missing_file_is_none(tmp_path):
|
||||
assert offset_from_h5(str(tmp_path / "nope.h5")) is None
|
||||
@@ -0,0 +1,64 @@
|
||||
from __future__ import annotations
|
||||
from pathlib import Path
|
||||
|
||||
import numpy as np, h5py
|
||||
|
||||
from sfm.database import SeismoDb
|
||||
from sfm.waveform_store import WaveformStore
|
||||
from scripts.backfill_event_shape import backfill_shape
|
||||
from minimateplus.models import Event, Timestamp, PeakValues
|
||||
|
||||
_FIX = Path(__file__).parent / "fixtures/histogram-extension-re/events-5-21-26/K558LL8B.7I0W"
|
||||
|
||||
|
||||
def _event(waveform_key="0111abcd"):
|
||||
ev = Event(index=0)
|
||||
ev._waveform_key = bytes.fromhex(waveform_key)
|
||||
ev.timestamp = Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0,
|
||||
month=6, day=25, hour=8, minute=50, second=0)
|
||||
ev.record_type = "Waveform"
|
||||
ev.peak_values = PeakValues(tran=0.075, vert=0.220, long=0.045,
|
||||
peak_vector_sum=0.231, micl=0.01)
|
||||
return ev
|
||||
|
||||
|
||||
def test_insert_stores_offset_from_record(tmp_path: Path):
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
ev = _event()
|
||||
rec = {ev._waveform_key.hex(): {
|
||||
"filename": "F.CE0W", "filesize": 10,
|
||||
"shape_offset": 1, "shape_offset_axis": "Tran",
|
||||
"shape_offset_pre": 0.05, "shape_offset_spread": 0.001}}
|
||||
db.insert_events([ev], serial="BE1", waveform_records=rec)
|
||||
row = db.query_events(serial="BE1")[0]
|
||||
assert row["shape_offset"] == 1
|
||||
assert row["shape_offset_axis"] == "Tran"
|
||||
assert abs(row["shape_offset_pre"] - 0.05) < 1e-6
|
||||
assert abs(row["shape_offset_spread"] - 0.001) < 1e-6
|
||||
|
||||
|
||||
def test_save_imported_bw_attaches_offset(tmp_path: Path):
|
||||
store = WaveformStore(tmp_path / "waveforms")
|
||||
ev, rec = store.save_imported_bw(_FIX.read_bytes(), source_path=_FIX, serial_hint="BE9558")
|
||||
assert rec["shape_offset"] in (0, 1)
|
||||
assert rec["shape_offset_axis"] in ("Tran", "Vert", "Long")
|
||||
assert "shape_offset_pre" in rec and "shape_offset_spread" in rec
|
||||
|
||||
|
||||
def test_backfill_updates_offset(tmp_path: Path):
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
store = WaveformStore(tmp_path / "waveforms")
|
||||
ev = Event(index=0); ev._waveform_key = bytes.fromhex("0111abcd")
|
||||
db.insert_events([ev], serial="BE1",
|
||||
waveform_records={ev._waveform_key.hex(): {"filename": "F.CE0W", "filesize": 10}})
|
||||
p = store.hdf5_path_for("BE1", "F.CE0W")
|
||||
with h5py.File(p, "w") as f:
|
||||
g = f.create_group("samples")
|
||||
g.create_dataset("Tran", data=np.full(300, 0.05, "float32"))
|
||||
g.create_dataset("Vert", data=np.zeros(300, "float32"))
|
||||
g.create_dataset("Long", data=np.zeros(300, "float32"))
|
||||
f.attrs["pretrig_samples"] = 50
|
||||
backfill_shape(db, store)
|
||||
row = db.query_events(serial="BE1")[0]
|
||||
assert row["shape_offset"] == 1
|
||||
assert row["shape_offset_axis"] == "Tran"
|
||||
@@ -0,0 +1,61 @@
|
||||
"""The event-report PDF must draw the three geo channels on ONE shared Y scale
|
||||
(max |sample| across Long/Vert/Tran, floored), not each trace auto-zoomed to its
|
||||
own peak — so relative amplitudes are honest and a small channel doesn't fill its
|
||||
lane looking as big as a large one. Mirrors the event-modal waveform behaviour.
|
||||
"""
|
||||
import matplotlib
|
||||
matplotlib.use("Agg")
|
||||
import matplotlib.pyplot as plt
|
||||
import pytest
|
||||
|
||||
from sfm.report_pdf import ReportData, _draw_waveform_subplot
|
||||
|
||||
|
||||
def _draw(channels):
|
||||
rd = ReportData(
|
||||
channels=channels,
|
||||
sample_rate_sps=1024,
|
||||
dt_ms=1000.0 / 1024,
|
||||
t0_ms=0.0,
|
||||
)
|
||||
fig = plt.figure()
|
||||
cell = fig.add_gridspec(1, 1)[0, 0]
|
||||
_draw_waveform_subplot(fig, cell, rd)
|
||||
by_label = {ax.get_ylabel(): ax for ax in fig.axes}
|
||||
try:
|
||||
yield_ = {k: by_label[k].get_ylim() for k in ("Long", "Vert", "Tran", "MicL")}
|
||||
finally:
|
||||
plt.close(fig)
|
||||
return yield_
|
||||
|
||||
|
||||
def test_geo_traces_share_one_y_scale():
|
||||
# Tran is the biggest geo channel (0.35); Long 0.10, Vert 0.02.
|
||||
ylims = _draw({
|
||||
"Long": [0.10, -0.10, 0.0],
|
||||
"Vert": [0.02, -0.02, 0.0],
|
||||
"Tran": [0.35, -0.35, 0.0],
|
||||
"MicL": [0.0005, -0.0005, 0.0],
|
||||
})
|
||||
# Shared scale = max(0.35 * 1.10, floor 0.05) = 0.385, symmetric.
|
||||
expected = pytest.approx(0.385, rel=1e-6)
|
||||
for ch in ("Long", "Vert", "Tran"):
|
||||
lo, hi = ylims[ch]
|
||||
assert hi == expected, f"{ch} top ylim {hi} != shared 0.385"
|
||||
assert lo == pytest.approx(-0.385, rel=1e-6), f"{ch} bottom ylim {lo}"
|
||||
# All three geo lanes identical.
|
||||
assert ylims["Long"] == ylims["Vert"] == ylims["Tran"]
|
||||
# Mic keeps its own (much smaller) scale — not lumped into the geo max.
|
||||
assert ylims["MicL"][1] < 0.01
|
||||
|
||||
|
||||
def test_geo_shared_scale_has_floor():
|
||||
# A tiny event (all geo well under the floor) clamps to the 0.05 floor.
|
||||
ylims = _draw({
|
||||
"Long": [0.008, -0.008, 0.0],
|
||||
"Vert": [0.006, -0.006, 0.0],
|
||||
"Tran": [0.010, -0.010, 0.0],
|
||||
"MicL": [0.0001, -0.0001, 0.0],
|
||||
})
|
||||
for ch in ("Long", "Vert", "Tran"):
|
||||
assert ylims[ch][1] == pytest.approx(0.05, rel=1e-6), f"{ch} not floored"
|
||||
@@ -0,0 +1,67 @@
|
||||
"""Blastware sensor self-check waveform decode (minimateplus.sensor_check).
|
||||
|
||||
Reverse-engineered 2026-09-15 against 7 BE12844 (MiniMate Plus) oracle events.
|
||||
After the main waveform record-chain and the trailing metadata / per-channel
|
||||
calibration records, a series-3 binary carries four length-prefixed records
|
||||
tagged 0x3c-0x3f: the sensor self-check traces the unit records when it pulses
|
||||
each sensor before monitoring (Blastware draws these as the little waveforms in
|
||||
the "Sensor Check" strip on the right of the Event Report).
|
||||
|
||||
* 0x3c / 0x3d / 0x3e = Tran / Vert / Long geophone ring-downs.
|
||||
* 0x3f = MicL, a pulse train at the mic self-test frequency.
|
||||
|
||||
The self-check injects a fixed pulse, so the response is near-identical across
|
||||
events — asserted here as an invariant shape (damped one-sided ring-down for
|
||||
the geophones, a multi-pulse train for the mic).
|
||||
"""
|
||||
from pathlib import Path
|
||||
|
||||
import numpy as np
|
||||
|
||||
from minimateplus.sensor_check import decode_sensor_check
|
||||
|
||||
FIXDIR = Path(__file__).parent / "fixtures" / "fft-oracle-2026-09-14"
|
||||
EVENTS = sorted(p.name for p in FIXDIR.iterdir()) # 7 BE12844 event binaries
|
||||
|
||||
|
||||
def _decode(name):
|
||||
return decode_sensor_check((FIXDIR / name).read_bytes())
|
||||
|
||||
|
||||
def test_all_four_channels_present():
|
||||
for name in EVENTS:
|
||||
sc = _decode(name)
|
||||
assert set(sc) == {"Tran", "Vert", "Long", "MicL"}, name
|
||||
|
||||
|
||||
def test_geo_channels_are_damped_ringdowns():
|
||||
# Each geophone self-check is a large one-sided deflection (~-990 raw) that
|
||||
# rings back and damps toward a settled value well above the trough.
|
||||
for name in EVENTS:
|
||||
sc = _decode(name)
|
||||
for ch in ("Tran", "Vert", "Long"):
|
||||
tr = np.asarray(sc[ch], dtype=float)
|
||||
assert 240 <= len(tr) <= 260, f"{name}:{ch} n={len(tr)}"
|
||||
assert abs(tr[:3].mean()) < 50, f"{name}:{ch} starts off-baseline"
|
||||
assert tr.min() < -800, f"{name}:{ch} min {tr.min()}"
|
||||
assert tr.max() < 60, f"{name}:{ch} unexpected positive swing {tr.max()}"
|
||||
# damped: settles between the trough and zero, well above the trough
|
||||
assert tr.min() < tr[-1] < 0, f"{name}:{ch} end {tr[-1]} not between trough and 0"
|
||||
assert abs(tr[-1]) < 0.6 * abs(tr.min()), f"{name}:{ch} not damped, end {tr[-1]}"
|
||||
|
||||
|
||||
def test_mic_channel_is_a_pulse_train():
|
||||
for name in EVENTS:
|
||||
tr = np.asarray(_decode(name)["MicL"], dtype=float)
|
||||
assert 235 <= len(tr) <= 255, f"{name} mic n={len(tr)}"
|
||||
# larger dynamic range than the geo ring-down, and swings both ways
|
||||
assert tr.min() < -1500, f"{name} mic min {tr.min()}"
|
||||
assert tr.max() > 100, f"{name} mic max {tr.max()}"
|
||||
# multiple pulses: several deep local minima
|
||||
deep = (tr[1:-1] < tr[:-2]) & (tr[1:-1] < tr[2:]) & (tr[1:-1] < -800)
|
||||
assert int(deep.sum()) >= 4, f"{name} mic pulses {int(deep.sum())}"
|
||||
|
||||
|
||||
def test_returns_empty_when_no_sensor_check_block():
|
||||
assert decode_sensor_check(b"not a blastware file") == {}
|
||||
assert decode_sensor_check(b"") == {}
|
||||
@@ -0,0 +1,67 @@
|
||||
"""Series-4 (Thor / Micromate IDFW) sensor self-check waveform decode.
|
||||
|
||||
Reverse-engineered 2026-09-15 against 4 UM (Thor) oracle events. The IDFW
|
||||
binary carries the sensor self-check in its fixed-header region (before the
|
||||
waveform body) as up to four records tagged ``01 0e 3c/3d/3e/3f`` — the SAME
|
||||
channel ids as series-3 (Tran/Vert/Long/MicL). Unlike series-3's delta-coded
|
||||
trailing block, series-4 stores each trace as a raw int16-BE array after an
|
||||
18-byte record header whose sample count is a 2-byte field at offset +8.
|
||||
|
||||
Three-channel (mic-disabled) Thor units carry only 3c/3d/3e — no MicL record.
|
||||
|
||||
Validated by shape (geophone ring-down / mic pulse train) and cross-event
|
||||
consistency, since there's no Thor Event-Report strip to exact-match against.
|
||||
"""
|
||||
from pathlib import Path
|
||||
|
||||
import numpy as np
|
||||
|
||||
from micromate.sensor_check import decode_idf_sensor_check
|
||||
|
||||
FIXDIR = Path(__file__).parent / "fixtures" / "thor-idf-sc"
|
||||
EVENTS = sorted(p.name for p in FIXDIR.glob("*.IDFW"))
|
||||
|
||||
|
||||
def _decode(name):
|
||||
return decode_idf_sensor_check((FIXDIR / name).read_bytes())
|
||||
|
||||
|
||||
def test_geo_channels_present_and_ringdown_shaped():
|
||||
# Every IDFW event has the three geophone self-checks; each is a large
|
||||
# one-sided deflection (~15000 raw counts) that rings back — the geophone's
|
||||
# damped impulse response.
|
||||
for name in EVENTS:
|
||||
sc = _decode(name)
|
||||
for ch in ("Tran", "Vert", "Long"):
|
||||
assert ch in sc, f"{name} missing {ch}"
|
||||
tr = np.asarray(sc[ch], dtype=float)
|
||||
tr = tr - tr[:4].mean() # reference to the pre-trigger baseline
|
||||
assert 40 <= len(tr) <= 300, f"{name}:{ch} n={len(tr)}"
|
||||
assert tr.min() < -8000, f"{name}:{ch} min {tr.min()}"
|
||||
# deflects one way and rings back toward / past the baseline
|
||||
assert tr.max() < abs(tr.min()), f"{name}:{ch} not one-sided"
|
||||
|
||||
|
||||
def test_mic_present_only_on_four_channel_units():
|
||||
# UM11719 / UM12947 record a mic; UM13981 / UM20147 are 3-channel
|
||||
# (mic-disabled) units and carry no MicL self-check.
|
||||
got = {name: ("MicL" in _decode(name)) for name in EVENTS}
|
||||
assert any(got.values()), "expected at least one 4-channel unit"
|
||||
assert not all(got.values()), "expected at least one 3-channel unit"
|
||||
for name, has_mic in got.items():
|
||||
if has_mic:
|
||||
tr = np.asarray(_decode(name)["MicL"], dtype=float)
|
||||
tr = tr - tr[:4].mean()
|
||||
# mic self-check is a bipolar pulse train — swings both ways, wide range
|
||||
assert tr.max() > 5000 and tr.min() < -5000, f"{name} mic not bipolar"
|
||||
|
||||
|
||||
def test_channel_ids_and_order():
|
||||
# ids decode to the canonical channel names, geo always in Tran/Vert/Long order
|
||||
sc = _decode(EVENTS[0])
|
||||
assert [c for c in ("Tran", "Vert", "Long") if c in sc] == ["Tran", "Vert", "Long"]
|
||||
|
||||
|
||||
def test_returns_empty_on_non_idf_input():
|
||||
assert decode_idf_sensor_check(b"not an IDF file") == {}
|
||||
assert decode_idf_sensor_check(b"") == {}
|
||||
@@ -0,0 +1,101 @@
|
||||
"""The BW filename encodes the serial NUMBER, never the family prefix.
|
||||
|
||||
"BE" is a MiniMate Plus; "BA" is a BlastMate. Both are Series III and their
|
||||
files are byte-compatible — the whole archive's 1,493 BlastMate binaries
|
||||
decode through the same codec at 100% — so the only thing that distinguishes
|
||||
them downstream is the serial string, and that lives in the file body.
|
||||
|
||||
Synthesising the prefix as "BE" files a BlastMate under a unit that does not
|
||||
exist. Four units in the DL2 archive are affected: BA9229, BA10060, BA10895
|
||||
and BA15957.
|
||||
"""
|
||||
from __future__ import annotations
|
||||
|
||||
import pytest
|
||||
|
||||
from minimateplus.client import _decode_0a_partial_header
|
||||
from sfm.waveform_store import (
|
||||
_serial_from_bw_bytes,
|
||||
_serial_from_bw_filename,
|
||||
_serial_number_from_bw_filename,
|
||||
)
|
||||
|
||||
|
||||
# ── the filename gives a number, and only a number ──────────────────────────
|
||||
|
||||
@pytest.mark.parametrize("name,num", [
|
||||
("P036L318.C80H", 14036), # BE14036
|
||||
("H907KWRK.WB0H", 6907), # BE6907
|
||||
("M529LKIQ.G10", 11529), # BE11529
|
||||
("T003LQ9K.OE0H", 18003), # BE18003
|
||||
("L895K63F.GE0W", 10895), # BA10895 — a BlastMate
|
||||
("K229HGQI.XO0W", 9229), # BA9229 — a BlastMate
|
||||
])
|
||||
def test_number_from_filename(name, num):
|
||||
assert _serial_number_from_bw_filename(name) == num
|
||||
|
||||
|
||||
@pytest.mark.parametrize("name", ["", "not_a_bw_file.bin", "AB12", "1234ABCD.XX0W"])
|
||||
def test_number_from_filename_rejects_junk(name):
|
||||
assert _serial_number_from_bw_filename(name) is None
|
||||
|
||||
|
||||
def test_filename_only_decoder_is_a_guess():
|
||||
"""It still answers "BE" — that is why it must not be the first choice."""
|
||||
assert _serial_from_bw_filename("L895K63F.GE0W") == "BE10895"
|
||||
assert _serial_from_bw_filename("M529LKIQ.G10") == "BE11529"
|
||||
assert _serial_from_bw_filename("nonsense") is None
|
||||
|
||||
|
||||
# ── the body carries the truth ──────────────────────────────────────────────
|
||||
|
||||
def _body(serial: bytes) -> bytes:
|
||||
return b"\x00" * 32 + b"STRT" + b"\xff\xfe" + serial + b"\x00Geo: 0.254 in/s\x00"
|
||||
|
||||
|
||||
def test_body_wins_for_a_blastmate():
|
||||
assert _serial_from_bw_bytes(_body(b"BA10895"), "L895K63F.GE0W") == "BA10895"
|
||||
|
||||
|
||||
def test_body_wins_for_a_minimate():
|
||||
assert _serial_from_bw_bytes(_body(b"BE11529"), "M529LKIQ.G10") == "BE11529"
|
||||
|
||||
|
||||
def test_body_candidate_must_match_the_filename_number():
|
||||
"""A serial-shaped byte run that disagrees with the filename is ignored."""
|
||||
assert _serial_from_bw_bytes(_body(b"XX99999"), "L895K63F.GE0W") is None
|
||||
|
||||
|
||||
def test_body_tolerates_a_leading_zero():
|
||||
assert _serial_from_bw_bytes(_body(b"BA09229"), "K229HGQI.XO0W") == "BA09229"
|
||||
|
||||
|
||||
@pytest.mark.parametrize("data,name", [
|
||||
(b"", "L895K63F.GE0W"), # no bytes
|
||||
(_body(b"BA10895"), "junk.bin"), # no derivable number
|
||||
])
|
||||
def test_body_returns_none_when_it_cannot_decide(data, name):
|
||||
assert _serial_from_bw_bytes(data, name) is None
|
||||
|
||||
|
||||
# ── the live monitor-log path ───────────────────────────────────────────────
|
||||
|
||||
def _partial_record(serial: bytes) -> bytes:
|
||||
"""0x2C partial record: type, prefix, two 9-byte timestamps, then ASCII."""
|
||||
ts = bytes([11, 0x10, 4, 0x07, 0xE9, 0, 16, 2, 0]) # 2025-04-11 16:02:00
|
||||
return (bytes([0x2C]) + b"\x00" * 10 + ts + ts
|
||||
+ b"\x00\x00\x00\x00" + serial + b"\x00Geo: 0.254 in/s\x00")
|
||||
|
||||
|
||||
@pytest.mark.parametrize("serial", [b"BE11529", b"BA10895", b"UM11719"])
|
||||
def test_monitor_log_reads_any_family_prefix(serial):
|
||||
entry = _decode_0a_partial_header(_partial_record(serial), 0, b"\x01\x11\x00\x00")
|
||||
assert entry is not None
|
||||
assert entry.serial == serial.decode()
|
||||
|
||||
|
||||
def test_monitor_log_geo_threshold_survives_a_blastmate():
|
||||
"""The old find(b"BE") skipped the whole block, losing geo too."""
|
||||
entry = _decode_0a_partial_header(_partial_record(b"BA10895"), 0, b"\x01\x11\x00\x00")
|
||||
assert entry is not None
|
||||
assert entry.geo_threshold_ips == pytest.approx(0.254)
|
||||
@@ -3,31 +3,34 @@ from sfm.database import SeismoDb
|
||||
from minimateplus.models import Event, Timestamp
|
||||
|
||||
|
||||
def _ins(db, key, serial, pvs, ts):
|
||||
def _ins(db, key, serial, pvs, ts, record_type="Waveform"):
|
||||
ev = Event(index=0)
|
||||
ev._waveform_key = bytes.fromhex(key)
|
||||
ev.timestamp = ts
|
||||
# peak_vector_sum comes from peak_values; simplest: insert then UPDATE pvs directly
|
||||
db.insert_events([ev], serial=serial)
|
||||
row = [r for r in db.query_events(serial=serial) if r["waveform_key"] == key][0]
|
||||
with sqlite3.connect(db.db_path) as c:
|
||||
c.execute("UPDATE events SET peak_vector_sum=? WHERE id=?", (pvs, row["id"]))
|
||||
c.execute("UPDATE events SET peak_vector_sum=?, record_type=? WHERE id=?",
|
||||
(pvs, record_type, row["id"]))
|
||||
return row["id"]
|
||||
|
||||
|
||||
def test_propagate_copies_flags_to_twins(tmp_path):
|
||||
def _ts(hour, minute, second=0, day=25):
|
||||
return Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0, month=2, day=day,
|
||||
hour=hour, minute=minute, second=second)
|
||||
|
||||
|
||||
def test_propagate_copies_flags_across_hours_apart_twins(tmp_path):
|
||||
# Flagging the waveform FT propagates to its histogram twin 75 min earlier
|
||||
# (the interval matcher pairs them; the old ±5-min window would have missed it).
|
||||
db = SeismoDb(tmp_path / "s.db")
|
||||
base = Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0, month=2, day=25, hour=20, minute=19, second=5)
|
||||
twin = Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0, month=2, day=25, hour=20, minute=19, second=45)
|
||||
other = Timestamp(raw=b"", flag=0x10, year=2026, unknown_byte=0, month=2, day=25, hour=20, minute=19, second=44)
|
||||
hist = _ins(db, "01110001", "BE1", 0.4763, _ts(19, 31, 17), "Histogram")
|
||||
wave = _ins(db, "01110002", "BE1", 0.4763, _ts(20, 46, 44), "Waveform") # twin, 75 min later
|
||||
other = _ins(db, "01110003", "BE1", 0.9999, _ts(20, 20, 0), "Waveform") # different pvs
|
||||
|
||||
primary_id = _ins(db, "01110001", "BE1", 0.4763, base)
|
||||
twin_id = _ins(db, "01110002", "BE1", 0.4763, twin) # twin: same serial+pvs, 40s apart
|
||||
non_twin_id = _ins(db, "01110003", "BE1", 0.9999, other) # near time but different pvs
|
||||
db.update_event_review(wave, {"false_trigger": True})
|
||||
moved = db.propagate_review_to_twins(wave)
|
||||
|
||||
db.update_event_review(primary_id, {"false_trigger": True})
|
||||
moved = db.propagate_review_to_twins(primary_id)
|
||||
|
||||
assert twin_id in moved
|
||||
assert db.get_event(twin_id)["false_trigger"] == 1
|
||||
assert db.get_event(non_twin_id)["false_trigger"] == 0
|
||||
assert hist in moved
|
||||
assert db.get_event(hist)["false_trigger"] == 1
|
||||
assert db.get_event(other)["false_trigger"] == 0
|
||||
|
||||
@@ -712,8 +712,27 @@ def test_forty_nn_is_a_data_block_not_a_segment_header():
|
||||
"""
|
||||
assert data_block_len(b"\x40\x02\x00\x01\x00\x02", 0) == (6, 2)
|
||||
assert data_block_len(b"\x40\x08" + bytes(16), 0) == (18, 8)
|
||||
# NN > 8 is not a data block
|
||||
assert data_block_len(b"\x40\x0c" + bytes(24), 0) == (None, None)
|
||||
|
||||
|
||||
def test_forty_nn_is_not_capped_at_eight():
|
||||
"""NN > 8 is a perfectly ordinary `40 NN` block.
|
||||
|
||||
This test previously asserted the opposite (`40 0c` -> (None, None)),
|
||||
codifying a guard that had no evidence behind it: the only corpora
|
||||
available then used NN in {1,2,3,4,8}, so the cap was never exercised.
|
||||
Loud UM12947 events use NN of 12, 16, 20 ... up to 196, and rejecting
|
||||
them halted the block walk mid-record — surfacing as silently short
|
||||
channels, since the walker stops at the first unrecognised tag rather
|
||||
than raising. Lifting the cap took that corpus from 22 length-mismatched
|
||||
files to 0, and 1,476,242 of 1,476,249 samples now reproduce Thor's own
|
||||
CSV export exactly (the 7 stragglers differ by one 4th-decimal tick).
|
||||
Verified 2026-09-11; see docs/idf_protocol_reference.md.
|
||||
"""
|
||||
assert data_block_len(b"\x40\x0c" + bytes(24), 0) == (26, 12)
|
||||
assert data_block_len(b"\x40\xc4" + bytes(392), 0) == (394, 196)
|
||||
# The real bound is the buffer: a block that cannot fit is not a block.
|
||||
assert data_block_len(b"\x40\xc4" + bytes(8), 0) == (None, None)
|
||||
assert data_block_len(b"\x40\x00" + bytes(8), 0) == (None, None)
|
||||
|
||||
|
||||
def test_record_chain_is_followed_by_length_not_by_tag_sniffing():
|
||||
|
||||
@@ -0,0 +1,85 @@
|
||||
"""Blastware-compatible channel FFT (waveform_fft).
|
||||
|
||||
Reverse-engineered 2026-09-14 against 7 BE12844 (MiniMate Plus) events, each with
|
||||
a Blastware FFT report as ground truth. The recipe (DC-remove, no window,
|
||||
zero-pad to 4096 → 0.25 Hz bins, single-sided 2/N amplitude) reproduces
|
||||
Blastware's dominant frequency to the exact bin on all 28 channels and the
|
||||
amplitude to report precision.
|
||||
"""
|
||||
from pathlib import Path
|
||||
|
||||
import numpy as np
|
||||
|
||||
from waveform_fft import channel_spectrum, dominant_frequency
|
||||
from minimateplus.waveform_codec import decode_waveform_v2
|
||||
|
||||
FIXDIR = Path(__file__).parent / "fixtures" / "fft-oracle-2026-09-14"
|
||||
GEO_LSB = 0.005 # 1 decode unit = 16 ADC counts = 0.005 in/s (series-3 Normal range)
|
||||
|
||||
# Blastware FFT-report ground truth: file → {channel: (dominant_hz, amplitude_ips)}.
|
||||
# amplitude is None where the channel is at the noise floor (report amp 0.000/0.001)
|
||||
# — the dominant frequency still matches exactly, but the amplitude isn't meaningful.
|
||||
ORACLE = {
|
||||
"N844LPGH.VV0W": {"Tran": (27.00, 0.018), "Vert": (26.75, 0.009), "Long": (26.50, 0.021), "MicL": (2.000, None)},
|
||||
"N844LPPR.3S0W": {"Tran": (30.75, None), "Vert": (46.75, None), "Long": (26.75, None), "MicL": (49.50, None)},
|
||||
"N844LQHB.ZT0W": {"Tran": (19.75, 0.040), "Vert": (26.50, 0.018), "Long": (26.50, 0.083), "MicL": (2.750, None)},
|
||||
"N844LQUE.T50W": {"Tran": (21.50, 0.080), "Vert": (14.25, 0.028), "Long": (28.50, 0.046), "MicL": (5.750, None)},
|
||||
"N844LR8W.790W": {"Tran": (31.00, None), "Vert": (31.00, None), "Long": (34.00, None), "MicL": (66.25, None)},
|
||||
"N844LRCO.G60W": {"Tran": (32.25, 0.009), "Vert": (32.00, 0.005), "Long": (32.00, 0.008), "MicL": (32.00, None)},
|
||||
"N844LRCW.F30W": {"Tran": (21.25, 0.010), "Vert": (42.25, 0.002), "Long": (21.25, 0.014), "MicL": (21.25, None)},
|
||||
}
|
||||
|
||||
|
||||
def test_pure_sine_frequency_and_amplitude():
|
||||
# A pure sine at a bin-centre frequency (128 cycles over 4096 samples) has no
|
||||
# leakage, so the single-sided 2/N normalisation returns the amplitude exactly.
|
||||
sps, n, f0, amp = 1024.0, 4096, 32.0, 0.5
|
||||
x = amp * np.sin(2 * np.pi * f0 * np.arange(n) / sps)
|
||||
freqs, amps = channel_spectrum(x, sps=sps, nfft=4096)
|
||||
fpk, apk = dominant_frequency(freqs, amps)
|
||||
assert fpk == 32.0
|
||||
assert abs(apk - amp) < 1e-3
|
||||
|
||||
|
||||
def test_bin_resolution_is_quarter_hz():
|
||||
freqs, _ = channel_spectrum(np.zeros(3328), sps=1024.0, nfft=4096)
|
||||
assert abs((freqs[1] - freqs[0]) - 0.25) < 1e-9
|
||||
|
||||
|
||||
def test_empty_input():
|
||||
freqs, amps = channel_spectrum([])
|
||||
assert len(freqs) == 0 and len(amps) == 0
|
||||
|
||||
|
||||
def _spectra(fname):
|
||||
raw = (FIXDIR / fname).read_bytes()
|
||||
dec = decode_waveform_v2(raw[raw.find(b"STRT") + 21:])
|
||||
out = {}
|
||||
for ch, samples in dec.items():
|
||||
ips = np.asarray(samples, float) * GEO_LSB
|
||||
out[ch] = channel_spectrum(ips, sps=1024.0)
|
||||
return out
|
||||
|
||||
|
||||
def test_dominant_frequency_matches_blastware_exactly():
|
||||
misses = []
|
||||
for fname, chans in ORACLE.items():
|
||||
spectra = _spectra(fname)
|
||||
for ch, (want_hz, _) in chans.items():
|
||||
got_hz, _ = dominant_frequency(*spectra[ch])
|
||||
if abs(got_hz - want_hz) > 0.25:
|
||||
misses.append(f"{fname}:{ch} got {got_hz} want {want_hz}")
|
||||
assert not misses, "dominant-frequency mismatches:\n" + "\n".join(misses)
|
||||
|
||||
|
||||
def test_amplitude_matches_blastware():
|
||||
misses = []
|
||||
for fname, chans in ORACLE.items():
|
||||
spectra = _spectra(fname)
|
||||
for ch, (_, want_amp) in chans.items():
|
||||
if want_amp is None:
|
||||
continue
|
||||
_, got_amp = dominant_frequency(*spectra[ch])
|
||||
if abs(got_amp - want_amp) > 0.0015:
|
||||
misses.append(f"{fname}:{ch} got {got_amp:.4f} want {want_amp:.3f}")
|
||||
assert not misses, "amplitude mismatches:\n" + "\n".join(misses)
|
||||
@@ -0,0 +1,66 @@
|
||||
"""Blastware-compatible FFT of a decoded seismograph channel.
|
||||
|
||||
Pure numpy; no I/O, no device or DB dependencies. Feed it a channel's decoded
|
||||
samples **in the unit you want the amplitudes in** (e.g. in/s) and it returns the
|
||||
single-sided amplitude spectrum that Blastware's *FFT Report* draws.
|
||||
|
||||
Reverse-engineered 2026-09-14 against 7 BE12844 (MiniMate Plus) events with
|
||||
Blastware FFT reports as ground truth. The recipe reproduces Blastware's
|
||||
**dominant frequency to the exact 0.25 Hz bin on all 28 channels** and the
|
||||
amplitude to report precision:
|
||||
|
||||
1. remove the DC component (subtract the mean); **no window** — a window
|
||||
smears the peak and measurably worsens the match,
|
||||
2. zero-pad to ``nfft`` (4096 → 0.25 Hz bins at 1024 sps — Blastware's
|
||||
resolution),
|
||||
3. single-sided amplitude ``A[k] = 2·|X[k]| / N`` where ``N`` is the real
|
||||
sample count (not ``nfft``).
|
||||
|
||||
The compliance chart (USBM RI8507 / OSMRE) is this spectrum's ``(freq, amp)``
|
||||
points plotted against the regulatory limit curve; the #10 FFT view is the
|
||||
spectrum itself.
|
||||
"""
|
||||
from __future__ import annotations
|
||||
|
||||
import numpy as np
|
||||
|
||||
BW_NFFT = 4096 # 0.25 Hz bins at 1024 sps — Blastware's FFT resolution
|
||||
BW_FMIN = 2.0 # dominant-frequency search floor (Hz)
|
||||
BW_FMAX = 250.0 # dominant-frequency search ceiling (Hz)
|
||||
|
||||
|
||||
def channel_spectrum(samples, sps: float = 1024.0, nfft: int = BW_NFFT):
|
||||
"""Single-sided amplitude spectrum of one channel, Blastware-compatible.
|
||||
|
||||
``samples`` is a 1-D sequence in the desired amplitude unit (in/s). Returns
|
||||
``(freqs, amps)`` numpy arrays covering ``0 .. sps/2`` in ``sps/nfft`` steps.
|
||||
|
||||
Records longer than ``nfft`` are truncated by the transform — untested
|
||||
against Blastware for that case (real MiniMate Plus records are ≤ ~3.3 s,
|
||||
well under 4096 samples at 1024 sps).
|
||||
"""
|
||||
x = np.asarray(samples, dtype=float)
|
||||
n = x.size
|
||||
if n == 0:
|
||||
return np.empty(0), np.empty(0)
|
||||
x = x - x.mean() # DC removal, no window
|
||||
mag = np.abs(np.fft.rfft(x, nfft))
|
||||
freqs = np.fft.rfftfreq(nfft, 1.0 / sps)
|
||||
amps = (2.0 / n) * mag # single-sided amplitude
|
||||
return freqs, amps
|
||||
|
||||
|
||||
def dominant_frequency(freqs, amps, fmin: float = BW_FMIN, fmax: float = BW_FMAX):
|
||||
"""Peak ``(frequency_hz, amplitude)`` of a spectrum within ``[fmin, fmax)``.
|
||||
|
||||
Matches Blastware's "Dominant Frequency" — the largest spectral bin in the
|
||||
reportable band (below 2 Hz is baseline/DC drift, above 250 Hz is noise).
|
||||
"""
|
||||
freqs = np.asarray(freqs)
|
||||
amps = np.asarray(amps)
|
||||
lo = int(np.searchsorted(freqs, fmin))
|
||||
hi = int(np.searchsorted(freqs, fmax))
|
||||
if hi <= lo:
|
||||
return 0.0, 0.0
|
||||
k = lo + int(np.argmax(amps[lo:hi]))
|
||||
return float(freqs[k]), float(amps[k])
|
||||
Reference in New Issue
Block a user