Files
seismo-relay/tests/test_micromate_protocol.py
T
serversdownandClaude Opus 5 9c28b586bb fix(micromate): the 0x5A chunk offset is a uint32 -- a 64 KB cap was one event away
UM20147 holds a 72,560-byte event.  chunk_params() wrote the offset as a uint16
at params[2:4], because every offset THOR was observed to send fits in two bytes
(largest 0x3400 = 13,312), which caps a download at 65,536 B -- so that event
could not have been fetched at all.

params[0:4] is demonstrably ONE 4-byte field: chunk 0 puts the 4-byte event key
there.  Writing the offset as a uint32 BE in the same slot is BYTE-IDENTICAL for
every offset below 65,536, so nothing verified against THOR's 74 captured frames
changes -- the replay test still matches all of them -- and the range extends to
4 GB.

Above 64 KB this is inference and the docstring says so: the field's width is
established, the device's handling of a non-zero high byte is not.

Also newly reachable: at offset 1 MiB params[1] is 0x10, which must go out as
`10 10`.  Nothing below 64 KB can produce that, so the uint32 change is what
first makes the case possible -- and an unescaped 0x10 in 5A params is the exact
bug that cost the Series III walk a release.  Tested.

THIS IS THE SERIES III 64 KB PAGE-BOUNDARY BUG WEARING A DIFFERENT HAT.  There,
parse_strt_end_offset() discards the key's page byte and the walk crashes once a
unit's buffer crosses 64 KB; that one is still open.  The transferable lesson:
an address field whose high bytes are zero in every capture is not a narrow
field, it is an untested one.  Same mistake, found twice, in code written years
apart.

Confirmed in the same run: 0x06 content[0:4] IS the event count -- UM20147 holds
5 events and reads 5, making it three for three across both firmware lines
(0->0, 6->6, 5->5).  And content[4:8] is a CONSTANT, not a count: it reads 9 on
a unit with 6 events and on a unit with 5.  list_events() still walks to the
sentinel; the count is worth adopting as a pre-check, not a replacement.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Ru8Lg9HkkYvX9VWWo65SmL
2026-10-01 00:41:08 -04:00

461 lines
18 KiB
Python

"""Protocol-layer tests for the Micromate (series-4) live client.
The load-bearing assertion in here is not "our parser understands the device" —
it is **"the bytes we put on the wire are the bytes THOR puts on the wire."**
Every request constant below is lifted from
``bridges/captures/9-24-26 - micromate2/`` (UM12947, firmware 11.0CB), so a
passing test means a real unit has already answered exactly that frame.
Responses are replayed through a scripted transport. No hardware, no network.
"""
from __future__ import annotations
import os
import sys
from pathlib import Path
import pytest
sys.path.insert(0, os.path.dirname(os.path.dirname(os.path.abspath(__file__))))
from micromate import protocol as P
from micromate.framing import ETX, STX, checksum, stuff
from micromate.protocol import (
ACK_DATA_LEN,
ChecksumError,
MicromateProtocol,
ShortRead,
UnexpectedResponse,
chunk_params,
key_lo_params,
key_params,
token_params,
)
FLAGS_CB = 0xC5
# ── Test doubles ──────────────────────────────────────────────────────────────
class ScriptedTransport:
"""Hands back queued responses; records every byte written."""
def __init__(self, responses: list[bytes] | None = None) -> None:
self.queue = list(responses or [])
self.written: list[bytes] = []
self._connected = True
# BaseTransport surface actually used by MicromateProtocol
def connect(self) -> None:
self._connected = True
def disconnect(self) -> None:
self._connected = False
def is_connected(self) -> bool:
return self._connected
def write(self, data: bytes) -> None:
self.written.append(data)
def read(self, n: int) -> bytes:
return self.queue.pop(0) if self.queue else b""
def frame(rsp_sub: int, data: bytes, *, flags: int = FLAGS_CB, page: int = 0) -> bytes:
"""Build a response frame the way a unit would."""
payload = bytes([0x00, flags, rsp_sub, (page >> 8) & 0xFF, page & 0xFF]) + data
return bytes([STX]) + stuff(payload + bytes([checksum(payload)])) + bytes([ETX])
def ack(rsp_sub: int) -> bytes:
return frame(rsp_sub, bytes(ACK_DATA_LEN))
def proto(responses: list[bytes], **kw) -> tuple[MicromateProtocol, ScriptedTransport]:
t = ScriptedTransport(responses)
return MicromateProtocol(t, recv_timeout=0.5, **kw), t
# ── Captured THOR request frames ──────────────────────────────────────────────
REQ = {
"poll": bytes.fromhex("41021010005b000030000000000000000000009b03"),
"serial": bytes.fromhex("41021010001500000a000000000000000000002f03"),
"state": bytes.fromhex("41021010004900ffff000000000000000000005703"),
"compliance": bytes.fromhex("41021010001a00ffff000000000000000000002803"),
"arm": bytes.fromhex("41021010009300ffff00000000000000000000a103"),
"setup_first": bytes.fromhex("41021010003f00ffff000000000000000000004d03"),
"setup_next": bytes.fromhex("41021010004000ffff000000000000000000004e03"),
}
# The complete 0x5A sequence for event 055d4a81 (4,076 bytes → 4 chunks), as
# THOR sent it. Chunk 1's params hold a literal 0x04 and chunk 3's offset is
# the exact remainder.
REQ_CHUNKS_4A81 = [
bytes.fromhex("41021010005a00100400055d4a810000000000009b03"),
bytes.fromhex("41021010005a0010040000001004000000000000007203"),
bytes.fromhex("41021010005a00100400000008000000000000007603"),
bytes.fromhex("41021010005a001003ec00000c000000000000006503"),
]
SIZE_4A81 = 4076
# ── Params builders ───────────────────────────────────────────────────────────
def test_event_token_sits_at_params_7():
"""⚠ THOR sends 0xFE here; the protocol reference documents all-zero params.
That reference entry describes our own browse probing, not THOR's.
"""
assert token_params() == bytes.fromhex("00000000000000fe0000")
def test_event_record_takes_the_full_key_at_params_4():
assert key_params(bytes.fromhex("055d4a81")) == bytes.fromhex("00000000055d4a810000")
def test_monitor_log_takes_only_the_low_half_of_the_key():
"""⚠ Inferred from one key value -- see key_lo_params' docstring."""
assert key_lo_params(bytes.fromhex("055d4a81")) == bytes.fromhex("0000000000004a810000")
def test_chunk_params_switch_from_key_to_byte_offset():
key = bytes.fromhex("055d4a81")
assert chunk_params(key, 0) == bytes.fromhex("055d4a81000000000000")
assert chunk_params(key, 1024) == bytes.fromhex("00000400000000000000")
assert chunk_params(key, 13312) == bytes.fromhex("00003400000000000000")
@pytest.mark.parametrize("bad", [b"", b"\x01\x02\x03", b"\x01\x02\x03\x04\x05"])
def test_params_builders_reject_a_wrong_length_key(bad):
for fn in (key_params, key_lo_params):
with pytest.raises(ValueError):
fn(bad)
# ── Each read emits the frame THOR emits ──────────────────────────────────────
@pytest.mark.parametrize(
"name, method, rsp_sub, data_len",
[
("poll", "poll", 0xA4, 59),
("serial", "read_serial", 0xEA, 21),
("state", "read_state", 0xB6, 16),
("compliance", "read_compliance_config", 0xE5, 2103),
("setup_first", "read_first_setup", 0xC0, 266),
("setup_next", "read_next_setup", 0xBF, 266),
],
)
def test_reads_match_thors_wire_bytes(name, method, rsp_sub, data_len):
p, t = proto([frame(rsp_sub, bytes(data_len))])
getattr(p, method)()
assert t.written == [REQ[name]]
def test_arm_event_matches_thors_wire_bytes():
p, t = proto([ack(0x6C)])
p.arm_event()
assert t.written == [REQ["arm"]]
def test_poll_is_the_only_read_with_a_non_ffff_offset_besides_serial():
"""Reads are single-step at 0xFFFF; POLL and SERIAL are the exceptions."""
assert set(P._OFFSETS) == {P.SUB_POLL, P.SUB_SERIAL}
assert P._OFFSETS[P.SUB_POLL] == 0x0030
assert P._OFFSETS[P.SUB_SERIAL] == 0x000A
# ── The chunk walk ────────────────────────────────────────────────────────────
def test_download_reproduces_thors_chunk_sequence_byte_for_byte():
"""The whole point of step 2. Four chunks, 4,076 bytes, THOR's exact frames."""
payload = bytes(range(256)) * 16 # 4096 B, we use the first 4076
payload = payload[:SIZE_4A81]
responses = []
for i in range(4):
want = min(P.CHUNK_SIZE, SIZE_4A81 - i * P.CHUNK_SIZE)
body = payload[i * P.CHUNK_SIZE: i * P.CHUNK_SIZE + want]
responses.append(frame(0xA5, bytes(11) + body, page=want // 256))
p, t = proto(responses)
got = p.read_event_file(bytes.fromhex("055d4a81"), SIZE_4A81)
assert t.written == REQ_CHUNKS_4A81
assert got == payload
assert len(got) == SIZE_4A81
@pytest.mark.parametrize(
"size, n_chunks, last_offset",
[
(4076, 4, 0x03EC), (11032, 11, 0x0318), (11502, 12, 0x00EE),
(13424, 14, 0x0070), (8746, 9, 0x022A), (6092, 6, 0x03CC),
(1024, 1, 0x0400), (1, 1, 0x0001), (1025, 2, 0x0001),
],
)
def test_chunk_count_and_final_offset(size, n_chunks, last_offset):
"""The first six rows are the six bench events, with THOR's real offsets."""
responses = []
for i in range(n_chunks):
want = min(P.CHUNK_SIZE, size - i * P.CHUNK_SIZE)
responses.append(frame(0xA5, bytes(11) + bytes(want)))
p, t = proto(responses)
p.read_event_file(bytes.fromhex("055d4a81"), size)
assert len(t.written) == n_chunks
# offset is payload[4:5] of the request; recover it from the built frame
final = t.written[-1]
assert final[7:9] in (
bytes([last_offset >> 8, last_offset & 0xFF]),
# a 0x02/0x03/0x04/0x10 high byte arrives escaped, shifting the pair
bytes([0x10, last_offset >> 8]),
)
def test_a_short_chunk_raises_rather_than_truncating():
"""A silently short event is the failure mode this codebase keeps hitting."""
p, _ = proto([frame(0xA5, bytes(11) + bytes(900))]) # asked for 1024
with pytest.raises(ShortRead, match="asked for 1024 B, got 900"):
p.read_event_file(bytes.fromhex("055d4a81"), 1024)
def test_a_chunk_too_short_to_hold_its_header_raises():
p, _ = proto([frame(0xA5, bytes(4))])
with pytest.raises(ShortRead, match="too short to hold a chunk header"):
p.read_event_file(bytes.fromhex("055d4a81"), 1024)
def test_download_rejects_a_nonsense_size():
p, _ = proto([])
with pytest.raises(ValueError):
p.read_event_file(bytes.fromhex("055d4a81"), 0)
# ── The monitor-log walk ──────────────────────────────────────────────────────
def test_monitor_log_walk_ends_on_a_short_response():
"""⚠ Not a keyed read -- the same request repeated, device-side cursor.
Eight records then an 11-byte ack, which is what the capture shows.
"""
key = bytes.fromhex("055d4a81")
responses = [frame(0xF5, bytes(297)) for _ in range(8)] + [ack(0xF5)]
p, t = proto(responses)
records = []
while (rec := p.read_monitor_log_next(key)) is not None:
records.append(rec)
assert len(records) == 8
assert len(t.written) == 9
assert len(set(t.written)) == 1, "every request in the walk is identical"
# ── Error handling ────────────────────────────────────────────────────────────
def test_a_bad_checksum_raises_by_default():
"""⚠ Deliberately stricter than the Series III sibling.
That one logs and continues because its parser cannot always tell an
inner-frame delimiter from a checksum byte. The Micromate rule is exact on
251/251 captured frames, so a mismatch here means something real.
"""
bad = bytearray(frame(0xA4, bytes(59)))
bad[-2] ^= 0xFF
p, _ = proto([bytes(bad)])
with pytest.raises(ChecksumError, match="checksum mismatch"):
p.poll()
def test_a_bad_checksum_can_be_downgraded_for_field_diagnosis():
bad = bytearray(frame(0xA4, bytes(59)))
bad[-2] ^= 0xFF
p, _ = proto([bytes(bad)], strict_checksums=False)
assert p.poll().sub == 0xA4
def test_the_wrong_response_sub_raises():
p, _ = proto([frame(0xE0, bytes(19))]) # 0xE0 answers 0x1F, not 0x1E
with pytest.raises(UnexpectedResponse, match="expected SUB 0xE1"):
p.read_event_first()
def test_a_timeout_reports_how_many_bytes_arrived():
"""Separates "nothing came back" from "bytes arrived but never framed".
Those have completely different causes -- and on a Micromate the second one
is the signature of a modem forwarding a session it should not be.
"""
p, _ = proto([])
with pytest.raises(P.TimeoutError, match="0 bytes were received"):
p.poll()
unframed = b"\x02\x00\xc5\xa4garbage-no-terminator"
p2, _ = proto([unframed])
with pytest.raises(P.TimeoutError, match=f"{len(unframed)} bytes were received"):
p2.poll()
def test_a_leftover_frame_is_discarded_rather_than_answered_with():
"""If a read returns two frames, the extra must not answer the NEXT request.
Every exchange resets the parser before sending, so anything already
buffered is treated as stale. Delivering it would be the worse failure:
`expected_sub` happens to catch a mismatched SUB, but a same-SUB leftover
would sail through and return data for the wrong key.
"""
# Both frames arrive while answering arm_event(); the 0xE1 is left over.
p, _ = proto([ack(0x6C) + frame(0xE1, b"\xaa" * 19)])
p.arm_event()
# The next request gets no bytes of its own, so it must time out rather
# than hand back the stale 0xE1.
with pytest.raises(P.TimeoutError):
p.read_event_first()
# ── Against the real capture, when it happens to be present ───────────────────
_CAPTURES = (
Path(__file__).resolve().parents[1]
/ "bridges" / "captures" / "9-24-26 - micromate2"
)
_DOWNLOAD = "raw_bw_20260925_011403_Download_events_then_delete_1_event.bin"
@pytest.mark.skipif(
not (_CAPTURES / _DOWNLOAD).is_file(),
reason="capture is gitignored; present only on a dev box",
)
def test_every_captured_download_frame_is_one_we_would_have_sent():
"""Replay the real session: for each event, assert our chunk walk emits
exactly the frames THOR emitted -- all 50-odd of them, six events."""
from micromate.framing import ACK, DLE
def destuffed_frames(blob: bytes, is_req: bool):
i, n = 0, len(blob)
while i < n:
if is_req:
if not (blob[i] == ACK and i + 1 < n and blob[i + 1] == STX):
i += 1
continue
j = i + 2
else:
if blob[i] != STX:
i += 1
continue
j = i + 1
out = bytearray()
while j < n:
if blob[j] == DLE and j + 1 < n:
out.append(blob[j + 1])
j += 2
continue
if blob[j] == ETX:
break
out.append(blob[j])
j += 1
if len(out) >= 6:
yield blob[i:j + 1], bytes(out[:-1])
i = j + 1
bw = list(destuffed_frames((_CAPTURES / _DOWNLOAD).read_bytes(), True))
s3 = list(
destuffed_frames(
(_CAPTURES / _DOWNLOAD.replace("raw_bw", "raw_s3")).read_bytes(), False
)
)
# Group THOR's 0x5A frames per event, taking each event's key+size from the
# 1E/1F that preceded them.
events, cur = [], None
for (wire, req), (_, rsp) in zip(bw, s3):
sub, data = req[2], rsp[5:]
if sub in (0x1E, 0x1F) and len(data) >= 19:
cur = {"key": data[11:15], "size": int.from_bytes(data[15:19], "big"),
"reqs": [], "rsps": []}
if cur["size"]:
events.append(cur)
elif sub == 0x5A and cur is not None:
cur["reqs"].append(wire)
cur["rsps"].append(rsp)
# The capture walks the chain twice (it deletes an event on the second
# pass), so some 1E/1F hits carry a size but no download behind them.
events = [e for e in events if e["reqs"]]
assert len(events) == 6, f"expected 6 downloaded events, found {len(events)}"
total = 0
for e in events:
p, t = proto([bytes([STX]) + stuff(r + bytes([checksum(r)])) + bytes([ETX])
for r in e["rsps"]])
got = p.read_event_file(e["key"], e["size"])
assert t.written == e["reqs"], (
f"event {e['key'].hex()}: our {len(t.written)} frames differ from "
f"THOR's {len(e['reqs'])}"
)
assert len(got) == e["size"]
total += len(e["reqs"])
assert total == 56, f"expected 56 download frames across the 6 events, saw {total}"
# ── Above 64 KB: the limit UM20147 already exceeds ────────────────────────────
def test_chunk_offsets_carry_past_64_kb():
"""⚠ The offset is a uint32 at params[0:4], not a uint16 at params[2:4].
Every offset THOR was observed to send fits in two bytes (largest 0x3400),
so params[0:2] was always zero and the field looks narrower than it is.
Reading it as a uint16 caps a download at 65,536 B — and UM20147 holds a
72,560 B event, so the cap is not hypothetical.
This is the Series III 64 KB page-boundary bug in a new guise; that one is
still open. An address field whose high bytes are zero in every capture is
not a narrow field, it is an untested one.
"""
key = bytes.fromhex("055d4a83")
# Below the old cap: byte-identical to the uint16 form, so nothing verified
# against THOR's frames changes.
for off in (1024, 13312, 65535):
assert chunk_params(key, off) == bytes(2) + off.to_bytes(2, "big") + bytes(6)
# Above it: the carry lands in params[1].
assert chunk_params(key, 65536) == bytes.fromhex("00010000") + bytes(6)
assert chunk_params(key, 71680) == bytes.fromhex("00011800") + bytes(6)
def test_a_chunk_offset_with_0x10_in_it_is_escaped_on_the_wire():
"""At offset 1 MiB params[1] is 0x10, which must go out as `10 10`.
Nothing below 64 KB can produce this, so it only became reachable with the
uint32 offset — and an unescaped 0x10 is the bug class that cost the
Series III `5A` walk a release.
"""
params = chunk_params(bytes(4), 1 << 20)
assert params[:4] == bytes.fromhex("00100000")
from micromate.framing import build_request
frame = build_request(P.SUB_BULK_DOWNLOAD, 0x0400, params)
assert bytes.fromhex("1010") in frame
def test_a_72kb_event_downloads_in_71_chunks():
"""UM20147's event 055d4a83, the one that broke the uint16 assumption."""
size = 72560
n = 71
responses = []
for i in range(n):
want = min(P.CHUNK_SIZE, size - i * P.CHUNK_SIZE)
responses.append(frame(0xA5, bytes(11) + bytes(want)))
p, t = proto(responses)
got = p.read_event_file(bytes.fromhex("055d4a83"), size)
assert len(got) == size
assert len(t.written) == n
# Chunk 64 is the first past the old cap; its params must carry the 0x01.
wire = t.written[64]
assert bytes.fromhex("000100") in wire, "the carry into params[1] is on the wire"