6a0422a6fc
- Establish v0.5.0 as first versioned release - README rewritten to reflect current scope: Blastware replacement in progress, not just a reverse-engineering capture tool - Documents all current components: seismo_lab.py, minimateplus, sfm/server.py, Console tab, TCP/cellular transport - Adds ACEmanager required settings table (Quiet Mode etc.) - Adds roadmap section - CHANGELOG.md created with entries from v0.1.0 through v0.5.0 Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
85 lines
4.9 KiB
Markdown
85 lines
4.9 KiB
Markdown
# Changelog
|
||
|
||
All notable changes to seismo-relay are documented here.
|
||
|
||
---
|
||
|
||
## v0.5.0 — 2026-03-31
|
||
|
||
### Added
|
||
- **Console tab in `seismo_lab.py`** — direct device connection without the bridge subprocess.
|
||
- Serial and TCP transport selectable via radio buttons.
|
||
- Four one-click commands: POLL, Serial #, Full Config, Event Index.
|
||
- Colour-coded scrolling output: TX (blue), RX raw hex (teal), parsed/decoded (green), errors (red).
|
||
- Save Log and Send to Analyzer buttons; logs auto-saved to `bridges/captures/console_<ts>.log`.
|
||
- Queue/`after(100)` pattern — no UI blocking or performance impact.
|
||
- **`minimateplus` package** — clean Python client library for the MiniMate Plus S3 protocol.
|
||
- `SerialTransport` and `TcpTransport` (for Sierra Wireless RV50/RV55 cellular modems).
|
||
- `MiniMateProtocol` — DLE frame parser/builder, two-step paged reads, checksum validation.
|
||
- `MiniMateClient` — high-level client: `connect()`, `get_serial()`, `get_config()`, `get_events()`.
|
||
- **TCP/cellular transport** (`TcpTransport`) — connect to field units via Sierra Wireless RV50/RV55 modems over cellular.
|
||
- `read_until_idle(idle_gap=1.5s)` to handle modem data-forwarding buffer delay.
|
||
- Confirmed working end-to-end: TCP → RV50/RV55 → RS-232 → MiniMate Plus.
|
||
- **`bridges/tcp_serial_bridge.py`** — local TCP-to-serial bridge for bench testing `TcpTransport` without a cellular modem.
|
||
- **SFM REST server** (`sfm/server.py`) — FastAPI server with device info, event list, and event record endpoints over both serial and TCP.
|
||
|
||
### Fixed
|
||
- `protocol.py` `startup()` was using a hardcoded `POLL_RECV_TIMEOUT = 10.0` constant, ignoring the configurable `self._recv_timeout`. Fixed to use `self._recv_timeout` throughout.
|
||
- `sfm/server.py` now retries once on `ProtocolError` for TCP connections to handle cold-boot timing on first connect.
|
||
|
||
### Protocol / Documentation
|
||
- **Sierra Wireless RV50/RV55 modem config** — confirmed required ACEmanager settings: Quiet Mode = Enable, Data Forwarding Timeout = 1, TCP Connect Response Delay = 0. Quiet Mode disabled causes modem to inject `RING\r\nCONNECT\r\n` onto the serial line, breaking the S3 handshake.
|
||
- **Calibration year** confirmed at SUB FE (Full Config) destuffed payload offset 0x56–0x57 (uint16 BE). `0x07E7` = 2023, `0x07E9` = 2025.
|
||
- **`"Operating System"` boot string** — 16-byte UART boot message captured on cold-start before unit enters DLE-framed mode. Parser handles correctly by scanning for DLE+STX.
|
||
- RV50/RV55 sends `RING`/`CONNECT` over TCP to the calling client even with Quiet Mode enabled — this is normal behaviour, parser discards it.
|
||
|
||
---
|
||
|
||
## v0.4.0 — 2026-03-12
|
||
|
||
### Added
|
||
- **`seismo_lab.py`** — combined Bridge + Analyzer GUI. Single window with two tabs; bridge start auto-wires live mode in the Analyzer.
|
||
- **`frame_db.py`** — SQLite frame database. Captures accumulate over time; Query DB tab searches across all sessions.
|
||
- **`bridges/s3-bridge/proxy.py`** — bridge proxy module.
|
||
- Large BW→S3 write frame checksum algorithm confirmed and implemented (`SUM8` of payload `[2:-1]` skipping `0x10` bytes, plus constant `0x10`, mod 256).
|
||
- SUB `A4` identified as composite container frame with embedded inner frames; `_extract_a4_inner_frames()` and `_diff_a4_payloads()` reduce diff noise from 2300 → 17 meaningful entries.
|
||
|
||
### Fixed
|
||
- BAD CHK false positives on BW POLL frames — BW frame terminator `03 41` was being included in the de-stuffed payload. Fixed to strip correctly.
|
||
- Aux Trigger read location confirmed at SUB FE offset `0x0109`.
|
||
|
||
---
|
||
|
||
## v0.3.0 — 2026-03-09
|
||
|
||
### Added
|
||
- Record time confirmed at SUB E5 page2 offset `+0x28` as float32 BE.
|
||
- Trigger Sample Width confirmed at BW→S3 write frame SUB `0x82`, destuffed payload offset `[22]`.
|
||
- Mode-gating documented: several settings only appear on the wire when the appropriate mode is active.
|
||
|
||
### Fixed
|
||
- `0x082A` mystery resolved — fixed-size E5 payload length (2090 bytes), not a record-time field.
|
||
|
||
---
|
||
|
||
## v0.2.0 — 2026-03-01
|
||
|
||
### Added
|
||
- Channel config float layout fully confirmed: trigger level, alarm level, and unit string per channel (IEEE 754 BE floats).
|
||
- Blastware `.set` file format decoded — little-endian binary struct mirroring the wire payload.
|
||
- Operator manual (716U0101 Rev 15) added as cross-reference source.
|
||
|
||
---
|
||
|
||
## v0.1.0 — 2026-02-26
|
||
|
||
### Added
|
||
- Initial `s3_bridge.py` serial bridge — transparent RS-232 tap between Blastware and MiniMate Plus.
|
||
- `s3_parser.py` — deterministic DLE state machine frame extractor.
|
||
- `s3_analyzer.py` — session parser, frame differ, Claude export.
|
||
- `gui_bridge.py` and `gui_analyzer.py` — Tkinter GUIs.
|
||
- DLE framing confirmed: `DLE+STX` / `DLE+ETX`, `0x41` = ACK (not STX), DLE stuffing rule.
|
||
- Response SUB rule confirmed: `response_SUB = 0xFF - request_SUB`.
|
||
- Year `0x07CB` = 1995 confirmed as MiniMate factory RTC default.
|
||
- Full write command family documented (SUBs `68`–`83`).
|