seismo-relay/CLAUDE.md

# CLAUDE.md — seismo-relay

Ground-up Python replacement for **Blastware**, Instantel's Windows-only software for
managing MiniMate Plus seismographs. Connects over direct RS-232 or cellular modem
(Sierra Wireless RV50 / RV55). Current version: **v0.12.1**.

---

## Project layout

```
minimateplus/         ← Python client library (primary focus)
  transport.py        ←   SerialTransport, TcpTransport
  framing.py          ←   DLE codec, frame builders, S3FrameParser
  protocol.py         ←   MiniMateProtocol — wire-level read/write methods
  client.py           ←   MiniMateClient — high-level API (connect, get_events, …)
  models.py           ←   DeviceInfo, EventRecord, ComplianceConfig, …

sfm/server.py         ← FastAPI REST server exposing device data over HTTP
seismo_lab.py         ← Tkinter GUI (Bridge + Analyzer + Console tabs)
docs/
  instantel_protocol_reference.md  ← reverse-engineered protocol spec ("the Rosetta Stone")
CHANGELOG.md          ← version history
```

---

## Current implementation state (v0.10.0)

Full read pipeline + write pipeline + erase pipeline + monitor log working end-to-end over TCP/cellular:

| Step | SUB | Status |
|---|---|---|
| POLL / startup handshake | 5B | ✅ |
| Serial number | 15 | ✅ |
| Full config (firmware, calibration date, etc.) | FE | ✅ |
| Compliance config (record time, sample rate, geo thresholds) | 1A | ✅ |
| Event index | 08 | ✅ |
| Event header / first key | 1E | ✅ |
| Waveform header | 0A | ✅ |
| Waveform record (peaks, timestamp, project) | 0C | ✅ |
| **Bulk waveform stream (event-time metadata)** | **5A** | ✅ new v0.6.0 |
| Event advance / next key | 1F | ✅ |
| **Write commands (push config to device)** | **68–83** | ✅ new v0.8.0 |
| **Erase all events** | **0xA3 → 0x1C → 0x06 → 0xA2** | ✅ new v0.9.0 |
| **Monitor log entries (partial 0x2C records)** | **0A browse** | ✅ **new v0.10.0** |

`get_events()` sequence per event: `1E → 0A → 0C → 5A → 1F`

`push_config_raw()` write sequence: `68→73 | 71×3→72 | 82→83 | 69→74→72`

`delete_all_events()` erase sequence: `0xA3 → 0x1C → 0x06 → 0xA2`

---

## Protocol fundamentals

### DLE framing

```
BW→S3 (our requests):   [ACK=0x41] [STX=0x02] [stuffed payload+chk] [ETX=0x03]
S3→BW (device replies): [DLE=0x10] [STX=0x02] [stuffed payload+chk] [bare ETX=0x03]
```

- **DLE stuffing rule:** any literal `0x10` byte in the payload is doubled on the wire
  (`0x10` → `0x10 0x10`). This includes the checksum byte.
- **Inner-frame terminators:** large S3 responses (A4, E5) contain embedded sub-frames
  using `DLE+ETX` as inner terminators. The outer parser treats `DLE+ETX` inside a frame
  as literal data — the bare ETX is the ONLY real frame terminator.
- **Response SUB rule:** `response_SUB = 0xFF - request_SUB`
  (no known exceptions — earlier note claiming `1C` → `6E` was WRONG; `1C` → `0xE3` confirmed across 338 frames in 4-8-26 captures)
- **Two-step read pattern:** every read command is sent twice — probe step (`offset=0x00`,
  get length) then data step (`offset=DATA_LENGTH`, get payload). All data lengths are
  hardcoded constants, not read from the probe response.

### De-stuffed payload header

```
BW→S3 (request):
  [0] CMD    0x10
  [1] flags  0x00
  [2] SUB    command byte
  [3] 0x00   always zero
  [4] 0x00   always zero
  [5] OFFSET 0x00 for probe step; DATA_LENGTH for data step
  [6-15]     params (key, token, etc. — see helpers in framing.py)

S3→BW (response):
  [0] CMD    0x00
  [1] flags  0x10
  [2] SUB    response sub byte
  [3] PAGE_HI
  [4] PAGE_LO
  [5+] data
```

---

## Critical protocol gotchas (hard-won — do not re-derive)

### SUB 5A — bulk waveform stream — NON-STANDARD frame format

**Always use `build_5a_frame()` for SUB 5A. Never use `build_bw_frame()` for SUB 5A.**

`build_bw_frame` produces WRONG output for 5A for two reasons:

1. **`offset_hi = 0x10` must NOT be DLE-stuffed.** Blastware sends the offset field raw.
   `build_bw_frame` would stuff it to `10 10` on the wire — the device silently ignores
   the frame. `build_5a_frame` writes it as a bare `10`.

2. **DLE-aware checksum.** When computing the checksum, `10 XX` pairs in the stuffed
   section contribute only `XX` to the running sum; lone bytes contribute normally. This
   differs from the standard SUM8-of-destuffed-payload that all other commands use.

Both differences confirmed by reproducing Blastware's exact wire bytes from the 1-2-26
BW TX capture. All 10 frames verified.

### SUB 5A — chunk counter is monotonic (CORRECTED 2026-04-06)

**Chunk counters are `chunk_num * 0x0400` for ALL chunks including chunk 1.**

The 4-2-26 BW TX capture showed `counter=0x1004` for chunk 1 of event key `01110000`, which
led to `_CHUNK1_COUNTER = 0x1004` being hardcoded as a special case. This was a Blastware
artifact, not a protocol requirement. Empirical test 2026-04-06: with `counter=0x1004` for
chunk 1 the device times out (120 s); with `counter=0x0400` (= `1 * 0x0400`) it responds
immediately and streams all frames correctly.

The 4-3-26 capture confirms the pattern for a second event (key `0111245a`):
chunk 1 = `0x245A`, chunk 2 = `0x285A`, chunk 3 = `0x2C5A` (each +0x0400). Blastware's
true formula is `key4[2:4] + n * 0x0400` — but since `key4[2:4]` of the first event is
`0x0000`, `n * 0x0400` produces the right result. The device does not strictly validate the
counter and streams data for any valid 5A request; using `chunk_num * 0x0400` is correct.

### SUB 5A — params are 11 bytes for chunk frames, 10 for termination

`bulk_waveform_params()` returns 11 bytes (extra trailing `0x00`). The 11th byte was
confirmed from the BW wire capture. `bulk_waveform_term_params()` returns 10 bytes.
Do not swap them.

### SUB 5A — event-time metadata lives in A5 frame 7

The bulk stream sends 9+ A5 response frames. Frame 7 (0-indexed) contains the compliance
setup as it existed when the event was recorded:

```
"Project:"      → project description
"Client:"       → client name        ← NOT in the 0C record
"User Name:"    → operator name      ← NOT in the 0C record
"Seis Loc:"     → sensor location    ← NOT in the 0C record
"Extended Notes"→ notes
```

**IMPORTANT — 5A "Project:" is session-start config, NOT per-event (confirmed 2026-04-05):**
The "Project:" string in the A5 frame 7 payload reflects the compliance setup from when
the *monitoring session first started*, not the individual event's project name.  The per-
event project name is correctly stored in the 210-byte 0C waveform record and must be
used as the authoritative source.  `_decode_a5_metadata_into` therefore only sets
`project` from 5A when 0C didn't already supply one.

"Client:", "User Name:", "Seis Loc:", and "Extended Notes" are **NOT** present in the 0C
record — 5A remains the sole source for those fields and they are set unconditionally.

`stop_after_metadata=True` (default) stops the 5A loop as soon as `b"Project:"` appears,
then sends the termination frame.

### SUB 5A — end-of-stream signal (confirmed 2026-04-06)

After streaming all waveform chunks, the device sends exactly **1 raw byte** in response to
the next chunk request, then goes silent. This is the natural end-of-stream indicator — NOT
a complete A5 frame. `S3FrameParser.bytes_fed` will be 1; no frame is assembled.

Handling: on `TimeoutError`, if `bytes_fed > 0` AND frames were already collected, treat as
graceful end-of-stream, break the loop, and proceed to the termination frame. If `bytes_fed
== 0` with no prior frames, it is a genuine transport failure — re-raise.

**Chunk recv timeout must be 10 s, not the default 120 s.** Chunks arrive within ~1 s each.
Using 120 s causes a ~2-minute stall at every end-of-stream detection. The `_recv_one` call
in the chunk loop passes `timeout=10.0` explicitly.

**Typical chunk count (BE11529, 1024 sps):** A 9,306-sample event produces 35 chunks before
end-of-stream. Chunks with uniform 1,036-byte data are all-zero ADC samples (post-event
silence). Only the initial variable-size chunks contain actual signal.

### SUB 5A — fi==9 hardcoded skip (FIXED 2026-04-06)

`_decode_a5_waveform()` previously had `elif fi == 9: continue` — a leftover from the
9-frame original blast capture where frame 9 was assumed to be a terminator. For current
35-frame streams, fi==9 is live waveform data (~133 sample-sets were being dropped).
Removed. Terminator detection is via `page_key == 0x0000` in `read_bulk_waveform_stream`,
not frame index.

### SUB 1E / 1F — event iteration null sentinel and token position (FIXED, do not re-introduce)

**token_params bug (FIXED):** The token byte was at `params[6]` (wrong). Both 3-31-26 and
4-3-26 BW TX captures confirm it belongs at **`params[7]`** (raw: `00 00 00 00 00 00 00 fe 00 00`).
With the wrong position the device ignores the token and 1F returns null immediately.

**1F token depends on context:**  In browse mode (no 5A), use all-zero params (`browse=True`).
In download mode (get_events with 5A), use token=0xFE (`browse=False`) — this is required to
arm the device's 5A bulk stream state machine.  The earlier "empirical" test showing token=0xFE
returns null was done WITHOUT the 1E(arm) step; that test is invalid.  BW always uses 1F(0xFE)
in download mode.  `count_events` uses `browse=True` (no 5A needed).

**0A context requirement:** `advance_event()` (1F) only returns a valid next-event key
when a preceding `read_waveform_header()` (0A) call has established device waveform
context for the current key.  Call 0A before every event in the loop, not just the first.
Calling 1F cold (after only 1E, with no 0A) returns the null sentinel regardless of how
many events are stored.

**1F response layout:** The next event's key IS at `data_rsp.data[11:15]` (= payload[16:20]).
Confirmed from 4-3-26 browse-mode S3 captures:
```
1F after 0A(key0=01110000):  data[11:15]=0111245a  data[15:19]=00001e36  ← valid
1F after 0A(key1=0111245a):  data[11:15]=01114290  data[15:19]=00000046  ← valid
1F null sentinel:            data[11:15]=00000000  data[15:19]=00000000  ← done
```

**Null sentinel:** `data8[4:8] == b"\x00\x00\x00\x00"` (= `data_rsp.data[15:19]`)
works for BOTH 1E trailing (offset to next event key) and 1F response (null key
echo) — in both cases, all zeros means "no more events."

**1E response layout:** `data_rsp.data[11:15]` = event 0's actual key; `data_rsp.data[15:19]`
= sample-count offset to the next event key (key1 = key0 + this offset).  If offset == 0,
there is only one event.

**Correct iteration pattern (confirmed empirically with live device, 2+ events):**

`count_events` (browse mode only, no 5A):
```
1E(all zeros) → key0, trailing0         ← trailing0 non-zero if event 1 exists
0A(key0)                                ← REQUIRED: establishes device context
1F(all zeros / browse=True) → key1      ← use all-zero params
0A(key1)                                ← REQUIRED before each advance
1F(all zeros) → null                    ← done
```

`get_events` (download mode, with 5A):
```
1E(all zeros) → key0, trailing0         ← trailing0 non-zero if event 1 exists
0A(key0)                                ← REQUIRED: establishes device context
1E(token=0xFE)                          ← REQUIRED: arms device for 5A; CONFIRMED 4-2-26 + 4-3-26
0C(key0)                                ← read waveform record
1F(token=0xFE) → [discard key]          ← REQUIRED: arms 5A bulk stream state machine
POLL × 3                                ← REQUIRED: 3 full POLL cycles before 5A (BW frames 68-73)
5A(key0)                                ← bulk stream; key0 used even though 1F already advanced
1F(all zeros / browse=True) → key1      ← USE THIS for loop iteration (browse=True returns correct key)
0A(key1)
1E(token=0xFE)                          ← re-arm for next event's 5A
0C(key1)
1F(token=0xFE) → [discard key]          ← arm 5A
POLL × 3
5A(key1)
1F(browse=True) → null                  ← done
```

**IMPORTANT — conditional browse 1F (UPDATED 2026-04-06):**
`1F(token=0xFE)` (browse=False) BEFORE POLL+5A arms the device's bulk stream state machine.
Its returned key is cached as `arm_key4` in `get_events()`.

`1F(browse=True)` AFTER 5A is ONLY sent when 5A **succeeded**.  If 5A timed out or failed,
sending browse 1F disrupts the device's internal state — subsequent 5A probes for the next
event get no response (confirmed empirically: calling browse 1F after a failed 5A causes the
next event's 5A probe to also time out with 0 bytes received).

In the failure path, `arm_key4` from `1F(download)` is used as a best-effort next-key hint:
- If `arm_key4 != cur_key`: use it to advance the loop without any 1F call
- If `arm_key4 == cur_key` (device stuck, typical for second+ events when 5A fails): abort

The diagnostic `bytes_fed` counter on `S3FrameParser` (incremented in every `feed()` call,
reset by `reset()`) makes it possible to distinguish "no bytes at all" from "bytes received
but no complete frame assembled" in 5A probe timeouts — both show up as 120s timeouts in
the log but have very different root causes.

**The 1E(token=0xFE) arm step is required (FIXED 2026-04-06):**
The device silently ignores all 5A probe frames unless a second SUB 1E with token=0xFE
has been issued between 0A and 0C.  This step is present in EVERY download cycle in both
the 4-2-26 and 4-3-26 BW TX captures.

**1F must come BEFORE 5A (FIXED 2026-04-06):**
BW always calls 1F (advance event) before starting the 5A bulk stream.  5A still uses the
pre-advance key — the device streams the waveform for the key that was set up with 0A+1E-arm+0C
even after 1F has moved the internal pointer to the next event.

**POLL × 3 required before 5A (FIXED 2026-04-06):**
BW sends exactly 3 complete POLL (SUB 5B) probe+data cycles between the last 1F and the
first 5A probe frame.  Confirmed from 4-2-26 BW TX capture frames 68-73.  Without these
POLLs the device does not respond to the 5A probe.  Use `proto.poll()` (not `startup()` —
`startup()` drains the boot string, which is only needed on initial connect).

`advance_event(browse=True)` sends all-zero params; `advance_event()` default (browse=False)
sends token=0xFE and is NOT used by any caller.
`advance_event()` returns `(key4, event_data8)`.
Callers (`count_events`, `get_events`) loop while `data8[4:8] != b"\x00\x00\x00\x00"`.

### SUB 1A — compliance config — orphaned send bug (FIXED, do not re-introduce)

`read_compliance_config()` sends a 4-frame sequence (A, B, C, D) where:
- Frame A is a probe (no `recv_one` needed — device ACKs but returns no data page)
- Frames B, C, D each need a `recv_one` to collect the response

**There must be NO extra `self._send(...)` call before the B/C/D recv loop without a
matching `recv_one()`.** An orphaned send shifts all receives one step behind, leaving
frame D's channel block (trigger_level_geo, alarm_level_geo, max_range_geo) unread and
producing only ~1071 bytes instead of ~2126.

### SUB 1A — anchor search range

`_decode_compliance_config_into()` locates sample_rate and record_time via the anchor
`b'\x01\x2c\x00\x00\xbe\x80\x00\x00\x00\x00'`. Search range is `cfg[0:150]`.

Do not narrow this to `cfg[40:100]` — the old range was only accidentally correct because
the orphaned-send bug was prepending a 44-byte spurious header, pushing the anchor from
its real position (cfg[11]) into the 40–100 window.

### Sample rate and DLE jitter in cfg data

Sample rate 4096 (`0x1000`) causes DLE jitter: the frame carries `10 10 00` on the wire,
which unstuffs to `10 00` — 2 bytes instead of 3. This makes frame C 1 byte shorter and
shifts all subsequent absolute offsets by −1. The anchor approach is immune to this.
Do NOT use fixed absolute offsets for sample_rate or record_time.

### TCP / cellular transport

- Protocol bytes over TCP are bit-for-bit identical to RS-232. No wrapping.
- The modem (RV50/RV55) forwards bytes with up to ~1s buffering. `TcpTransport` uses
  `read_until_idle(idle_gap=1.5s)` to drain the buffer completely before parsing.
- Cold-boot: unit sends the 16-byte ASCII string `"Operating System"` before entering
  DLE-framed mode. The parser discards it (scans for DLE+STX).
- RV50/RV55 sends `\r\nRING\r\n\r\nCONNECT\r\n` over TCP to the caller even with
  Quiet Mode enabled. Parser handles this — do not strip it manually before feeding to
  `S3FrameParser`.

### Required ACEmanager settings (Sierra Wireless RV50/RV55)

| Setting | Value | Why |
|---|---|---|
| Configure Serial Port | `38400,8N1` | Must match MiniMate baud |
| Flow Control | `None` | Hardware FC blocks TX if pins unconnected |
| **Quiet Mode** | **Enable** | **Critical.** Disabled injects `RING`/`CONNECT` onto serial, corrupting S3 handshake |
| Data Forwarding Timeout | `1` (= 0.1 s) | Lower latency |
| TCP Connect Response Delay | `0` | Non-zero silently drops first POLL frame |
| TCP Idle Timeout | `2` (minutes) | Prevents premature disconnect |
| DB9 Serial Echo | `Disable` | Echo corrupts the data stream |

---

## Key confirmed field locations

### SUB FE — Full Config (166 destuffed bytes)

| Offset | Field | Type | Notes |
|---|---|---|---|
| 0x34 | firmware version string | ASCII | e.g. `"S338.17"` |
| 0x56–0x57 | calibration year | uint16 BE | `0x07E9` = 2025 |
| 0x0109 | aux trigger enabled | uint8 | `0x00` = off, `0x01` = on |

### SUB 1A — Compliance Config (~2126 bytes total after 4-frame sequence)

| Field | How to find it |
|---|---|
| sample_rate | uint16 BE at anchor − 2 |
| record_time | float32 BE at anchor + 10 |
| trigger_level_geo | float32 BE, located in channel block |
| alarm_level_geo | float32 BE, adjacent to trigger_level_geo |
| max_range_geo | float32 BE, adjacent to alarm_level_geo — **⚠ value and units UNKNOWN** (reads 6.206053 but doesn't match either UI range option; may not be the ADC full-scale — see GitHub issue) |
| setup_name | ASCII, null-padded, in cfg body |
| project / client / operator / sensor_location | ASCII, label-value pairs |

Anchor: `b'\x01\x2c\x00\x00\xbe\x80\x00\x00\x00\x00'`, search `cfg[0:150]`

### SUB 0C — Waveform Record (210 bytes = data[11:11+0xD2])

**sub_code=0x10 (Waveform single-shot) — 9-byte timestamp header:**

| Offset | Field | Type |
|---|---|---|
| 0 | day | uint8 |
| 1 | sub_code | uint8 (`0x10`) |
| 2 | month | uint8 |
| 3–4 | year | uint16 BE |
| 5 | unknown | uint8 (always 0) |
| 6 | hour | uint8 |
| 7 | minute | uint8 |
| 8 | second | uint8 |

**sub_code=0x03 (Waveform continuous) — 10-byte timestamp header (1-byte shift):**

Confirmed 2026-04-03 against Blastware event report (15:20:17 Apr 3 2026).
Raw wire bytes: `10 03 10 04 07 ea 00 0f 14 11`

| Offset | Field | Type | Notes |
|---|---|---|---|
| 0 | unknown_a | uint8 | `0x10` observed |
| 1 | day | uint8 | doubles as sub_code position in 0x10 layout |
| 2 | unknown_b | uint8 | `0x10` observed |
| 3 | month | uint8 | |
| 4–5 | year | uint16 BE | |
| 6 | unknown | uint8 | |
| 7 | hour | uint8 | |
| 8 | minute | uint8 | |
| 9 | second | uint8 | |

**Peak values (both record types):**

| Location | Field | Type |
|---|---|---|
| `tran_pos - 12` | peak_vector_sum | float32 BE — label-relative, NOT fixed offset |
| `label + 6` | PPV per channel | float32 BE (search for `"Tran"`, `"Vert"`, `"Long"`, `"MicL"`) |

PPV labels are NOT 4-byte aligned. The label-relative approach is the only reliable method.
`peak_vector_sum` is exactly 12 bytes before the `"Tran"` label — confirmed for both
sub_code=0x10 and sub_code=0x03.  Do NOT use fixed offset 87 (only incidentally correct
for 0x10 records).

---

## SFM REST API (sfm/server.py)

### Live device endpoints (connect to device per-request)

```
GET  /device/info?port=COM5                              ← serial
GET  /device/info?host=1.2.3.4&tcp_port=9034            ← cellular
GET  /device/events?host=1.2.3.4&tcp_port=9034&baud=38400
GET  /device/event?host=1.2.3.4&tcp_port=9034&index=0
GET  /device/monitor/status?host=1.2.3.4&tcp_port=9034  ← battery, memory, mode
POST /device/monitor/start?host=1.2.3.4&tcp_port=9034   ← start recording
POST /device/monitor/stop?host=1.2.3.4&tcp_port=9034    ← stop recording
```

Server retries once on `ProtocolError` for TCP connections (handles cold-boot timing).

### DB read endpoints (query seismo_relay.db written by ach_server.py)

```
GET  /db/units                                           ← all known serials + summary stats
GET  /db/events?serial=BE11529&from_dt=&to_dt=&limit=   ← triggered events, newest first
GET  /db/monitor_log?serial=BE11529&from_dt=&to_dt=     ← monitoring intervals, newest first
GET  /db/sessions?serial=BE11529&limit=50               ← ACH call-home sessions, newest first
PATCH /db/events/{id}/false_trigger?value=true          ← flag/unflag false triggers
```

DB file: `bridges/captures/seismo_relay.db` (default; override with `--db-path` at startup).
All DB endpoints are read-only except `PATCH /db/events/{id}/false_trigger`.

---

## Key wire captures (reference material)

| Capture | Location | Contents |
|---|---|---|
| 1-2-26 | `bridges/captures/1-2-26/` | SUB 5A BW TX frames — confirmed 5A frame format, 11-byte params, DLE-aware checksum |
| 3-11-26 | `bridges/captures/3-11-26/` | Full compliance setup write, Aux Trigger capture |
| 3-31-26 | `bridges/captures/3-31-26/` | Complete event download cycle (148 BW / 147 S3 frames) — confirmed 1E/0A/0C/1F sequence; only 1 event stored so token=0xFE appeared to work |
| 4-3-26 | `bridges/captures/4-3-26/` | Browse-mode S3 capture with 2+ events — confirmed all-zero params for 1F, 1F response layout, null sentinel, 0A context requirement |

---

## Write commands (SUBs 68–83) — confirmed 2026-04-07

All confirmed from 3-11-26 BW TX capture (`raw_bw_20260311_170151.bin`, frames 102–112).

### Write frame format — CRITICAL: minimal DLE stuffing

Write frames do NOT use the same DLE stuffing as read frames. **Only the BW_CMD byte
(0x10 at payload position [0]) is doubled on the wire. All other bytes — flags, sub,
offset, params, data, and checksum — are written RAW without stuffing.**

Confirmed from all 11 write frames in the 3-11-26/170151 BW capture. ✅ 2026-04-07

Do NOT use `dle_stuff()` or `build_bw_frame()` for write commands. Use `build_bw_write_frame()`.

```
Actual wire layout:
  [41]       ACK
  [02]       STX
  [10 10]    BW_CMD doubled (ONLY DLE stuffing applied)
  [00]       flags
  [sub]      write command byte (0x68–0x83)
  [00]       always zero
  [hi][lo]   offset uint16 BE — RAW (not stuffed even if hi=0x10)
  [params]   10 bytes — RAW
  [data]     variable-length write payload — RAW (0x10 bytes not stuffed)
  [chk]      checksum — RAW (not stuffed even if 0x10)
  [03]       ETX

Total wire length = 2 (ACK+STX) + 2 (doubled BW_CMD) + 15 (raw header) + len(data) + 1 (chk) + 1 (ETX)
                 = 21 + len(data)
```

De-stuffed payload (logical; used for checksum computation only):
```
  [0]     BW_CMD  0x10
  [1]     flags   0x00
  [2]     SUB     write command byte (0x68–0x83)
  [3]     0x00    always zero
  [4]     offset_hi
  [5]     offset_lo
  [6:16]  params  10-byte field (see per-SUB notes below)
  [16:]   data    write payload (variable length; absent for confirm frames)
  [-1]    chk     large-frame DLE-aware checksum (see below)
```

Write SUBs = Read SUB + 0x60. Response SUB follows the standard 0xFF − Request SUB rule.

### Write frame checksum

All write frames (data frames AND confirm frames) use the **large-frame DLE-aware checksum**:

```python
chk = (sum(b for b in payload[2:] if b != 0x10) + 0x10) & 0xFF
```

This is identical to the SUB 5A DLE-aware checksum. Confirmed against all 11 write frames in
the 3-11-26/170151 capture. ✅ 2026-04-07

Note: confirm frames contain no embedded 0x10 bytes, so both the standard SUM8 and the
DLE-aware formula produce the same result for them — but `build_bw_write_frame` always uses
the DLE-aware formula for consistency.

### Write ack responses

All device acks for write commands are **17-byte zero-data S3 frames**:

```
[DLE=0x10][STX=0x02][stuffed(header + chk)][bare ETX=0x03]
```

The data section carries zeros; RSP_SUB = 0xFF − write_request_SUB.

### Write SUB constants and sequences

| Request SUB | Function | Offset | Response SUB |
|---|---|---|---|
| 0x68 | Event index write | `data[1] + 2` | 0x97 |
| 0x73 | Confirm B (follows 68) | 0 | 0x8C |
| 0x71 | Compliance write (×3 chunks) | see below | 0x8E |
| 0x72 | Confirm A (follows 71×3, 69) | 0 | 0x8D |
| 0x82 | Trigger config write | `data[1] + 2` | 0x7D |
| 0x83 | Trigger confirm (follows 82) | 0 | 0x7C |
| 0x69 | Waveform data write | `data[1] + 2` | 0x96 |
| 0x74 | Confirm C (follows 69) | 0 | 0x8B |

**Offset formula for single-chunk writes (0x68, 0x69, 0x82):** `offset = data[1] + 2`

The write payload always begins with a 2-byte header `[0x00][length]`, where `data[1]` is
an embedded length field. The offset encodes this inner length + 2 (accounting for the
header bytes). Confirmed from all three single-chunk write frames in the 3-11-26 capture:

| SUB | data[0:4] (hex) | data[1] | offset | total data len |
|---|---|---|---|---|
| 0x68 | `00 58 09 00` | 0x58=88 | 0x5A=90 | 91 |
| 0x82 | `00 1A D5 00` | 0x1A=26 | 0x1C=28 | 29 |
| 0x69 | `00 C8 08 00` | 0xC8=200 | 0xCA=202 | 204 |

Full sequence: `68→73 | 71×3→72 | 82→83 | 69→74→72`

### SUB 71 — compliance write chunk parameters

The full compliance config payload (~2128 bytes) is split into exactly 3 chunks.
Confirmed from 3-11-26 BW TX capture frames 104–108:

| Chunk | Size | `offset` | `params` (10 bytes hex) |
|---|---|---|---|
| 1 (first) | 1027 bytes | 0x1004 | `00 00 00 00 00 00 00 00 00 00` |
| 2 (middle) | 1055 bytes | 0x1004 | `00 00 00 10 04 00 00 00 00 00` |
| 3 (last) | remainder | 0x002C | `00 00 08 00 00 00 00 00 00 00` |

Total: 1027 + 1055 + N = 2082 + N bytes (N ≈ 46 for a standard 2128-byte config).

After all 3 chunks are acked (SUB 0x8E each), send SUB 72 confirm → device acks 0x8D.

### `build_bw_write_frame()` — framing.py

```python
build_bw_write_frame(sub, data, *, offset=0, params=bytes(10)) -> bytes
```

Use for all write commands (SUBs 68–83) including confirm frames (data=b"").
**Do NOT use `build_bw_frame` for write commands** — it uses standard SUM8, not the
large-frame DLE-aware checksum required for writes.

### `push_config_raw()` — client.py

```python
client.push_config_raw(event_index_data, compliance_data, trigger_data, waveform_data)
```

Orchestrates the full write sequence in the confirmed order. All payloads are raw bytes
(no encoding performed at this level). A higher-level encoder that builds payloads from
a `ComplianceConfig` object is a future task.

---

## Monitoring commands (SUBs 0x1C, 0x96, 0x97) — confirmed 2026-04-08

All confirmed from 4-8-26/2ndtry BW TX/S3 capture (clean start → 30s monitor → stop cycle).

### SUB 0x1C — Monitor status read

Standard two-step read (probe at offset 0x00, data at offset 0x2C).
Response SUB = 0xFF − 0x1C = **0xE3** (standard formula — no exception).

**Payload length is 46–47 bytes IDLE, 48–49 bytes MONITORING** — not a reliable sole
indicator due to 1-byte jitter overlap at the boundary.

**Monitoring flag (CONFIRMED 2026-04-09 — byte diff of all 144 data frames, 2ndtry capture):**
- `section[1] == 0x00` → unit is **idle**
- `section[1] == 0x10` → unit is **monitoring**

This is `data[12]` (= `frame.data[12]`).  The flag is 0x00 in all 36 IDLE_BEFORE frames,
0x10 in all 98 MONITORING frames, and 0x00 in all 10 IDLE_AFTER frames — 100% accurate.

**HISTORY OF THIS FIELD (do not re-derive):**  The original implementation used `section[1]`.
A re-analysis in the prior session incorrectly concluded `section[1]` is always 0x00 and
"corrected" the flag to `section[6]`, which has non-binary values (0xea idle, 0x07 monitoring)
and is device-specific.  The 2026-04-09 re-analysis confirms `section[1]` was right.

**IMPORTANT — `frame.data` has checksum already stripped** by `S3FrameParser._finalise()`
(`raw_payload = body[:-1]`; `data = raw_payload[5:]`).  There is NO trailing checksum byte in
`section`.  All relative-from-end offsets must account for this.

Battery and memory fields are present in **both** states:

| Offset (relative to end) | Field | Type | Notes |
|---|---|---|---|
| `section[-10:-8]` | battery voltage × 100 | uint16 BE | `0x02A8` = 680 → 6.80 V |
| `section[-8:-4]` | memory total (bytes) | uint32 BE | e.g. 983026 ≈ 960 KB |
| `section[-4:]` | memory free (bytes) | uint32 BE | decreases as events are stored |

### SESSION_RESET signal (`41 03`) — required for monitoring units

Confirmed from 4-8-26 BW TX captures: Blastware sends a 2-byte `41 03` (ACK + ETX,
no STX) immediately before the first POLL probe AND between the probe and data frames.
This signal is **required to wake units that are actively monitoring** — without it
the unit does not respond to POLL over TCP.  Harmless for idle units.

`SESSION_RESET = bytes([0x41, 0x03])` is defined in `framing.py` and sent by
`protocol.startup()` before and between POLL frames.

### SUB 0x96 — Start monitoring

Single write frame, **no data payload** (empty body).
Response SUB = 0xFF − 0x96 = **0x69**.

Wire bytes (confirmed frame 92 of 2ndtry BW capture):
```
41 02 10 10 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 a6 03
```

### SUB 0x97 — Stop monitoring

Single write frame, **no data payload** (empty body).
Response SUB = 0xFF − 0x97 = **0x68**.

Wire bytes (confirmed frame 305 of 2ndtry BW capture):
```
41 02 10 10 00 97 00 00 00 00 00 00 00 00 00 00 00 00 00 a7 03
```

Both start and stop acks are standard 17-byte zero-data S3 frames.

### On-device sensor check behavior (confirmed 2026-04-08)

Confirmed from 4-8-26/sensor-check BW+S3 capture (Blastware "Unit Channel Test" comms
check issued while unit was performing its on-device sensor check).

**Unit IS reachable during on-device sensor check** — POLL (SUB 5B) responded normally
throughout.  However, the unit partially handled channel-test commands (SUB 0x0E) for
channels 0–4 and then went **silent for ~40 seconds** while the sensor check ran, before
resuming responses for channels 5–7 and the trigger test (SUB 0x98).

Key findings:
- On-device sensor check duration: approximately **40 seconds** (log gap `18:40:48` → `18:41:28`)
- Unit IS reachable for POLL during the check window — SESSION_RESET + POLL works
- Partial command responses during check are possible (device may buffer some, drop others)
- The Blastware "Unit Channel Test" (remote comms check, SUBs 0x0E + 0x98) is a SEPARATE
  operation from the on-device check — it is a passive remote read; the unit's screen does
  not change during a remote comms check

**SFM behavior after `POST /device/monitor/start`:** `_pollMonitorConfirm()` polls
`/device/monitor/status` every 5 s for up to 60 s, updating the badge on each poll.
Status will show MONITORING once `section[1]` flips to `0x10`.

### SUBs known from sensor-check capture (4-8-26) — NOT YET IMPLEMENTED

| BW SUB | RSP SUB | Function | Notes |
|---|---|---|---|
| 0x15 | 0xEA | Serial number / short ID | 2-step read; data offset = 0x0A (10 bytes); confirmed serial `"BE11529"` at `data[11+5:]` |
| 0x01 | 0xFE | Device info block | 2-step read; data offset = 0x98 (152 bytes); payload includes serial + firmware + float config fields |
| 0x0E | 0xF1 | Channel sensor data | 2-step read; channel selector in `params[6:8]` (`0x0000`–`0x0007`); data length 0x0A per channel; used by Blastware "Unit Channel Test" — see docs/ for details |
| 0x98 | 0x67 | Trigger test | Single probe frame (`params[0]=0xFF`); sent twice per test cycle; all-zero data response; used after 0x0E channel scan |

Blastware's "Unit Channel Test" sequence: `POLL×N → 0x15 → 0x01 → 0x08 → 0x01 → 0x0E×8 → 0x98×2 → 0x0E×8` (repeat pass with live ADC readings).

---

## Compliance config field inventory (from Blastware UI, 2026-04-08)

Fields visible in the Blastware Compliance Setup dialog — most are NOT YET decoded to byte
offsets in the raw 1A/E5 payload.  Only fields with `✅` have confirmed offsets in the code.

**Recording Setup tab:**
- Recording Mode: Continuous / Single Shot / Histogram (enum)
- Record Stop Mode: Fixed Record Time / Auto / Manual Stop (enum)
- Sample Rate: Standard 1024 / Fast 2048 / Faster 4096 sps ✅ (anchor−2)
- Record Time: float, seconds ✅ (anchor+10)
- Histogram Interval: 5 / 15 / 30 / 60 minutes (enum, mode-gated)
- Storage Mode: Save All Data / Save Triggered (enum)
- Geophone Type: Standard Triaxial / 4.5 Hz (bool/enum)
- Geophone Channels: Enable all geophones (bool), Trigger Source (bool)
- Chan 1-3 Trigger Level (float, in/s) ✅ (`trigger_level_geo`)
- Chan 1-3 Maximum Range: Normal 10.000 / 1.25 in/s (enum) ❓ (`max_range_geo` — offset found, reads 6.206053 which matches neither UI value; units and meaning unknown — do NOT use as ADC full-scale)
- Microphone Channels: Enable all microphones (bool), Trigger Source (bool)
- Chan 4 Trigger Level (dB or psi depending on units)

**Notes tab:**
- Enable User Notes (bool)
- Project, Client, User Name, Seis Loc (ASCII strings) ✅ (sourced from A5 frame 7 via 5A)
- Enable Extended Notes (bool); Extended Notes text; Extended Notes Title
- Enable Job Number (bool); Job Number (int)
- Enable Scaled Distance (bool); Distance from Blast (float); Charge Weight (float) — Scaled Distance is derived

**Special Setups tab:**
- Unit Timer: Timer Mode (Off/On), Start Date/Time, Stop Date/Time
- Self Check: Mode (Off/On), Time (HH:MM)
- Sensor Check: **Before monitoring** / After each event / **Disabled** ❓ (byte offset unknown)
- Measurement Units: Imperial / Metric
- Show Mic units in dB (bool)
- Time Format: 24 Hour / 12 Hour (AM/PM)
- Backlight on Time (seconds) ✅ (event index block +75)
- Power Saving Timeout (minutes) ✅ (event index block +83)
- Monitoring LCD Cycle ✅ (event index block +84:86)
- Set unit time with setup (bool)

The "Sensor Check" dropdown (`Before monitoring` / `After each event` / `Disabled`) has NOT
been located in the raw config bytes.  The user's unit always runs with `Before monitoring`.
Full compliance config encoder is a future task.

---

---

## Erase-all protocol (SUBs 0xA3/0xA2/0x06) — confirmed 2026-04-11

Full sequence confirmed from 4-11-26 MITM capture of a live Blastware ACH session
(`bridges/captures/mitm/ach_mitm_20260411_001912/`).

### Wire sequence

```
BW → device:  SUB 0xA3  params=00 00 00 00 00 00 00 FE 00 00  (begin erase)
device → BW:  SUB 0x5C  (ack)
BW → device:  SUB 0x1C  probe (offset=0x00)
device → BW:  SUB 0xE3  (probe ack)
BW → device:  SUB 0x1C  data  (offset=0x2C)
device → BW:  SUB 0xE3  (monitor status response)
BW → device:  SUB 0x06  probe (offset=0x00, params same)
device → BW:  SUB 0xF9  (probe ack)
BW → device:  SUB 0x06  data  (offset=0x24)
device → BW:  SUB 0xF9  (36-byte storage range response)
BW → device:  SUB 0xA2  params=00 00 00 00 00 00 00 FE 00 00  (confirm erase)
device → BW:  SUB 0x5D  (ack — device memory is now cleared)
```

All frames use standard `build_bw_frame` (not write-format).  Response SUBs follow the
standard `0xFF - SUB` formula; no exceptions.

### SUB 0x06 — event storage range response (36 bytes)

The 36-byte response body ends with two 4-byte event keys:

| Offset (from end) | Field | Notes |
|---|---|---|
| `[-8:-4]` | first stored event key | `01110000` when empty |
| `[-4:]` | last stored event key | `01110000` when empty |

Before erase: ends with `<first_key> <last_key>` (e.g. `0111ea60 0111eaa6`).
After erase: both bytes read `01110000` — device's empty/reset sentinel.

### Post-erase key counter reset

After a successful erase, the device resets its event counter.  New events start from
key `0x01110000` again — the same key as the very first event ever recorded.  This means
key-based deduplication in the ACH server must account for key reuse:

- After our own erase: `ach_state.json` `downloaded_keys` and `max_downloaded_key` are
  cleared so the next session starts fresh.
- After an external erase: the ACH server detects it by comparing `max(device_keys)` to
  `max_downloaded_key` from state.  If the device max has rolled back below the historical
  max, all current device keys are treated as new regardless of `seen_keys`.

### ACH server state format (v0.9.0)

`bridges/captures/ach_state.json`:
```json
{
  "BE11529": {
    "downloaded_keys":    ["01110000", "0111245a"],
    "max_downloaded_key": "0111245a",
    "last_seen":          "2026-04-11T01:04:36",
    "serial":             "BE11529",
    "peer":               "63.43.212.232:51920"
  }
}
```

`max_downloaded_key` is the high-water mark — the largest key ever downloaded from the
unit.  It is NOT reset when events are erased from the device (only when our server does
the erase).  Used for post-erase detection.

---

## Monitor log entries — SUB 0x0A partial records (confirmed 2026-04-11)

Confirmed from 4-11-26 MITM capture: 12 partial records (record type `0x2C`) and 7 full
event records (record type `0x46`) across 19 total 0x0A responses.

### Record type detection

`read_waveform_header()` returns `(raw_data, length)` where `raw_data = data_rsp.data`
(the full payload including prefix bytes).  The record type is at `raw_data[0]`:

| Value | Type | How to process |
|---|---|---|
| `0x46` | Full triggered event | Normal download: 0C → 5A → 1F |
| `0x2C` | Monitor log entry (partial) | No 0C/5A; decode inline from 0A payload |

Length heuristic: `length < 0x40` (64) reliably identifies partial records across all
observed captures.  Both checks (`raw_data[0] == 0x2C` and `length < 0x40`) are used.

### SUB 0x0A partial record (0x2C) payload layout

All offsets are from `raw_data` (the full `data_rsp.data` array including the 11-byte
prefix before the actual header bytes start).

```
raw_data[0]   = 0x2C   ← record type (partial / monitor log)
raw_data[1:11] = prefix bytes (vary; contain key4 copy, flags, length)
raw_data[11:] = timestamp and ASCII metadata payload
```

**Timestamp auto-detection** (confirmed from 4-11-26 capture):

```
raw_data[11] == 0x10  →  10-byte sub_code=0x03 format (continuous mode)
raw_data[11] != 0x10  →  9-byte sub_code=0x10 format (single-shot mode)
```

**9-byte timestamp format (sub_code=0x10):**

| Byte | Field |
|---|---|
| 0 | day |
| 1 | `0x10` (sub_code marker) |
| 2 | month |
| 3–4 | year (uint16 BE) |
| 5 | unknown (0x00) |
| 6 | hour |
| 7 | minute |
| 8 | second |

**10-byte timestamp format (sub_code=0x03):**

| Byte | Field |
|---|---|
| 0 | `0x10` (marker) |
| 1 | day |
| 2 | `0x10` (marker) |
| 3 | month |
| 4–5 | year (uint16 BE) |
| 6 | unknown (0x00) |
| 7 | hour |
| 8 | minute |
| 9 | second |

**Two timestamps:** Each partial record contains two timestamps — `start_time` and
`stop_time` — stored consecutively:
- `ts1` (start) at `raw_data[ts_offset : ts_offset + ts_size]` where `ts_offset = 11`
- `ts2` (stop) at `raw_data[ts1_end : ts1_end + ts_size]`

**Edge case — 1-byte gap between timestamps:** Occurs when ts1 and ts2 share the same
minute:second.  If `try_ts(raw_data[ts1_end:])` fails, try `try_ts(raw_data[ts1_end+1:])`.
Confirmed in frames 121, 161, 165 of the 4-11-26 MITM capture.  Frame 121 still shows 0s
duration (both decode to 16:02:00) — the extra byte appears in all same-second cases.

**ASCII metadata after timestamps:**
```
<separator bytes>  BE<serial>\x00Geo: <float> in/s ...
```

- Serial: scan for `b"BE"`, read until `b"\x00"` (e.g. `"BE11529"`)
- Geo threshold: scan for `b"Geo: "`, read float until next space (e.g. `0.254` in/s)

A separator of variable length (4–5 bytes of `\x00` + flags) sits between the two
timestamps and the ASCII region.  The `b"BE"` anchor scan is robust to separator length
variation.

### `_decode_0a_partial_header(raw_data, index, key4)` — client.py

Returns a `MonitorLogEntry` or `None`.  Called by `get_monitor_log_entries()` for each
event key whose 0x0A response has `raw_data[0] == 0x2C` or `length < 0x40`.

### `MiniMateClient.get_monitor_log_entries(skip_keys=None)` — client.py

Browse-mode walk: `1E → 0A → check type → decode if partial → 1F`.  No 0x0C or 5A reads
performed.  Full (0x46) records are skipped without decoding.  Returns `list[MonitorLogEntry]`.

`skip_keys` (optional `set[str]`): keys in this set are still advanced through the walk
(to avoid disrupting the iteration sequence), but no `MonitorLogEntry` is created for them.

### `MonitorLogEntry` model — models.py

```python
@dataclass
class MonitorLogEntry:
    index: int                                      # 0-based position
    key: str                                        # 8-hex event key
    start_time: Optional[datetime.datetime] = None
    stop_time:  Optional[datetime.datetime] = None
    serial: Optional[str] = None
    geo_threshold_ips: Optional[float] = None
    raw_header: Optional[bytes] = field(default=None, repr=False)

    @property
    def duration_seconds(self) -> Optional[float]: ...
```

### ACH server integration (v0.10.0)

After `get_events()`, the ACH server calls `get_monitor_log_entries(skip_keys=seen_keys)`.
New entries are saved to `monitor_log.json` in the session directory.  Monitor log keys are
included in `current_keys` for state persistence so they are not re-processed on the next
call-home.

---

## What's next

- **Database** — SQLite store for events + monitor log entries; dedup by key; queryable
- **Histograms** — decode histogram-mode A5 data (noise floor tracking)
- Compliance config encoder — build raw write payloads from a `ComplianceConfig` object
- Locate "Sensor Check" byte in compliance config (need capture with Disabled vs Before-monitoring)
- Modem manager — push RV50/RV55 configs via Sierra Wireless API
- RV55 DCD/DTR issue — newer RV55 firmware doesn't assert DCD by default; units don't
  resume monitoring after call-home disconnect (`--restart-monitoring` flag deferred)