A buffer desync on the shared persistent connection (commonly right after
a DRD/DOD test) can make a Measure? read return a stray value. The state
classifier treated anything not in {"Start","Measure"} as "not measuring",
so a garbled read logged a phantom STOPPED, the next clean read logged
STARTED, and that reset measurement_start_time — producing constant
STOPPED/STARTED device-log pairs and a drifting elapsed timer.
Now only recognized states drive transitions: {"Start","Measure"} =
measuring, {"Stop"} = stopped, anything else = no change. Garbled reads
are also not persisted as the cached state, so they can't poison the next
transition check. Builds on the earlier Start<->Measure normalization.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Lets an instance stop occupying a device's single TCP connection slot so
another instance (e.g. prod) can take over.
Per-unit:
- POST /api/nl43/{unit_id}/deactivate — poll_enabled=False (persisted) +
drop the connection (waits up to 10s for in-flight ops via the device
lock, then discards). Unit stays dormant across restarts.
- POST /api/nl43/{unit_id}/activate — re-enable polling.
Global standby:
- POST /api/nl43/_system/standby — poller idles and releases ALL
connections; the loop keeps re-releasing so the instance holds no slots.
- POST /api/nl43/_system/resume — resume polling.
- GET /api/nl43/_system/status — active vs standby + active_connections.
- SLMM_POLLING_ENABLED=false starts an instance in standby (persistent
way to keep a dev box from latching onto a prod-owned device).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
POST /api/nl43/{unit_id}/disconnect cleanly closes (TCP FIN + wait_closed)
and drops the pooled connection for a single device, freeing the NL43's
one connection slot. Previously only /_connections/flush existed, which
tears down every device at once.
Idempotent; no-op if nothing is cached. Releases the idle pooled
connection only — an active DRD stream/command has the socket checked out
of the pool, so close the stream WebSocket to end a live stream.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Completes the SLMM side of the L1/L10 live-display contract. The NL-43's
DOD response carries percentile slots LN1-LN5 (channel 1, parts[5]/[6]);
parse the first two and expose them as ln1/ln2 end to end:
- NL43Snapshot dataclass: ln1/ln2 fields
- NL43Status model: ln1/ln2 columns (+ migrate_add_ln_percentiles.py)
- DOD parser: snap.ln1=parts[5], snap.ln2=parts[6]
- persist_snapshot writes them
- all /status data dicts, StatusPayload, and the DRD stream payload emit
ln1/ln2 (null on the DRD stream itself, which doesn't carry percentiles)
Labels: device LN1 defaults to L5, not L1 — Terra-View defaults the label
to L1/L10, so the device's Ln1/Ln2 slots must be set to 1%/10% for the
labels to be accurate (dynamic label emission is a follow-up).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two device-data bugs surfaced while scoping the live-feed work:
1. DOD parser misalignment. DOD's response has no leading counter and
includes LE + LN1-LN5, but the parser reused the DRD field map
(parts[0]=counter). That shifted everything: Lp was stored as the
counter, Leq as Lp, LE as Leq, and LN1 as Lpeak (visible because
"Lpeak" came out below Lmax, which is impossible). Parse DOD with its
own map: Lp=0, Leq=1, Lmax=3, Lmin=4, Lpeak=10 (channel 1 = main).
2. measurement_start_time reset on every live-stream open/close. The DOD
path tags state "Start"; the DRD stream path tags "Measure". The
transition detector treated only "Start" as measuring, so opening the
stream ("Start"->"Measure") read as a stop (cleared start time) and
closing it ("Measure"->"Start") read as a start (reset to now). Every
viewer reset the elapsed measurement time. Treat {"Start","Measure"}
both as measuring.
LN1/LN2 (L1/L10) parsing + model/serialization is the next step.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
stream_drd() discarded the pooled connection and forced a fresh connect.
The NL43 allows only one TCP connection at a time; over a cellular link
the device does not free its single slot fast enough for an immediate
reconnect, so the fresh connect times out — the live DRD stream fails
while start/stop commands (which reuse the warm pooled socket) keep
working. This surfaced once the persistent connection pool was enabled
(TCP_PERSISTENT_ENABLED=true).
Stream over the already-open pooled connection via acquire() instead of
discard()+_open_connection(), and release() it back to the pool on exit
(after sending SUB to stop the stream) so commands keep reusing the same
single socket. The per-device lock is held for the whole streaming
session, so the poller can't touch the socket concurrently.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Modern Starlette requires `request` as the first positional arg to
TemplateResponse. The old `TemplateResponse(name, context)` form caused
the context dict to be passed as the template name, which Jinja2 then
tried to use as a cache key -> TypeError: unhashable type: 'dict' (500
on GET / and /roster).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- db cache dump on diagnostics request.
- individual device logs, db and files.
-Device logs api endpoints and diagnostics UI.
Fix:
- slmm standalone now uses local TZ (was UTC only before)
- fixed measurement start time logic.
- Implemented a new `/roster` endpoint to retrieve and manage device configurations.
- Added HTML template for the roster page with a table to display device status and actions.
- Introduced functionality to add, edit, and delete devices via the roster interface.
- Enhanced `ConfigPayload` model to include polling options.
- Updated the main application to serve the new roster page and link to it from the index.
- Added validation for polling interval in the configuration payload.
- Created detailed documentation for the roster management features and API endpoints.
serversdown
claude