Three-pass audit of docs/instantel_protocol_reference.md against
CLAUDE.md and the minimateplus/ implementation. Closes long-standing
discrepancies that had accumulated as the protocol understanding
evolved month over month.
Major corrections:
- §2/§3: S3 frames terminate on bare ETX, not DLE+ETX; payload
byte[1] is flags / byte[2] is SUB (was wrongly DLE/ADDR).
- §4.2: probe responses do not carry data length; DATA_LENGTH
is a per-SUB hardcoded constant.
- §5.1: dropped stale duplicate "SUB 1C = TRIGGER CONFIG READ"
row; SUB 0A lengths corrected from 0x30/0x26 to 0x46/0x2C.
- §5.3: added the missing write-frame mechanics (BW_CMD-only
doubling, DLE-aware checksum, offset = data[1]+2, ack format,
SUB 71 chunk parameters).
- §7.6.x: switched compliance-anchor convention from the unstable
10-byte form to the canonical 6-byte `\xbe\x80\x00\x00\x00\x00`;
recording_mode confirmed at anchor−8 in both read and write
(the prior anchor−3/−4 split caused anchor drift on write).
Sample_rate at anchor−6, histogram_interval at anchor−4 (now ✅),
record_time at anchor+6. Geo_range row added at channel_label+33.
- §7.5b/§8: added the 10-byte sub_code=0x03 continuous-mode
timestamp variant; peak vector sum location corrected from
fixed offset 87 to label-relative tran_pos−12.
- §7.7.2: SUB 1E/1F token byte at params[7], not params[6].
- §7.7.3: SUB 0A length disambiguation rewritten.
- §7.8.4/§7.8.7: fi==9 skip marked FIXED; metadata-page TODO
replaced with current decoder state.
- §11: POLL example wire bytes corrected; SUB 5A row added to
checksum table.
- §13/§14: device-under-test updated to BE11529/S338.17; TCP
Idle Timeout consistency fix (0→2 min); Data Forwarding
Timeout units clarified.
- §15 (renumbered from second §14): open-question entries
already resolved in CLAUDE.md closed out.
- Appendix D: extension taxonomy rewritten — extensions encode
a timestamp (AB0T scheme), not recording mode.
Navigation note added to §7 acknowledging the organic-growth
duplicate section numbers (§7.5/§7.5b, §7.6, §7.7, §7.8, §7.9)
and pointing readers to the canonical sections for each topic.
https://claude.ai/code/session_019tWZybD94YUsBaEGhnM5A2
- Created a comprehensive runbook (`wedged_unit_recovery.md`) detailing the recovery process for units stuck in a call-home loop, including symptoms, recovery steps, and explanations of the failure mode.
- Added `blind_stop.sh` script to send stop-monitoring commands in a tight loop for unresponsive devices.
- Introduced `rescue_device.sh` script to disable Auto Call Home and erase events from a busy device.
- Implemented `slow_drip.sh` script to send stop-monitoring frames at a slow rate to prevent UART overrun.
- Developed `spam_stop.sh` script to rapidly send stop-monitoring commands to a device.
- Created `watch_unit.sh` script for passive monitoring of device reachability, logging results over time.
- Update `s3_bridge.py` to default raw capture file paths to "auto" for timestamped naming.
- Modify `gui_bridge.py` to pre-check raw capture options and streamline path handling.
- Extend `ach_server.py` to save both incoming and outgoing raw bytes for analysis.
- Revise `CHANGELOG.md` and `instantel_protocol_reference.md` to reflect changes in recording mode handling and compliance data encoding.
- Added `CallHomeConfig` model to represent the Auto Call Home settings.
- Introduced methods in `MiniMateClient` for reading (`get_call_home_config`) and writing (`set_call_home_config`) the call home configuration.
- Updated `MiniMateProtocol` with new commands for call home operations (SUB 0x2C for read, SUB 0x7E for write, and SUB 0x7F for confirm).
- Created API endpoints for retrieving and updating call home settings in the server.
- Enhanced the web interface with a new "Call Home" tab for user interaction with call home settings.
- Implemented JavaScript functions for reading and writing call home configurations from the web app.
section[6] is the monitoring flag (was wrongly section[1] — section[1] is always
0x00 in both states). Battery and memory fields use relative-from-end offsets
(section[-11:-9], section[-9:-5], section[-5:-1]) instead of absolute positions,
which broke when the payload grew by 3 bytes in monitoring mode.
Confirmed from full byte diff of 142 0xE3 frames in 4-8-26/2ndtry capture.
SFM start_monitoring now polls /device/monitor/status every 5s for up to 60s
instead of a fixed 25s delay (unit runs ~40s on-device sensor check before
confirming monitoring state).
Also corrects stale 1C→6E response anomaly claim in protocol reference — no
exceptions to the 0xFF−SUB rule are known.
- Introduced new SUBs for monitoring status, start, and stop commands in protocol.py.
- Implemented read_monitor_status, start_monitoring, and stop_monitoring methods in MiniMateProtocol class.
- Added new API endpoints for monitoring status retrieval and control in server.py.
- Enhanced the web application with a monitoring panel, including battery and memory status display.
- Created a new Python script to parse SUB 0x1C response frames for monitoring status.
- Documented the monitoring status response format and field locations in markdown and text files.
Adds §7.8.4 to protocol reference and corresponding CLAUDE.md sections:
- End-of-stream: device sends exactly 1 raw byte after last chunk; handled
via TimeoutError + bytes_fed>0 check → graceful break to termination
- Chunk timing: ~1s per chunk, 35 chunks for a 9,306-sample event, safe
timeout is 10s (not default 120s)
- fi==9 decoder bug: hardcoded skip drops ~133 sample-sets per event;
noted as known issue pending fix
- ADC conversion: counts × (range/32767) → physical units (in/s for geo)
Changelog entries added for all four items (2026-04-06).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Added `_decode_a5_waveform()` to parse SUB 5A frames into per-channel time-series data.
- Introduced `download_waveform(event)` method in `MiniMateClient` to fetch full waveform data.
- Updated `Event` model to include new fields: `total_samples`, `pretrig_samples`, `rectime_seconds`, and `_waveform_key`.
- Enhanced documentation in `CHANGELOG.md` and `instantel_protocol_reference.md` to reflect new features and confirmed protocol details.
New/corrected sections:
§7.6.1 Record Time — corrected: anchor+10 supersedes the +0x28 absolute
offset. Added 3 s, 5 s, 8 s confirmations alongside existing 7/10/13.
Warning added: do NOT use fixed offset for BE11529.
§7.6.2 (NEW) SUB 1A Multi-Frame Read Protocol — 4-frame A/B/C/D
sequence documented (reverse-engineered from raw_bw capture). E5
page_key field explained. BE11529 duplicate-page behaviour and
(page_key, chunk_len) dedup strategy documented.
§7.6.3 (NEW) Sample Rate and DLE Jitter — Normal/Fast/Faster = 1024/
2048/4096 Sa/s confirmed. Root cause of ±1 byte cfg jitter explained:
4096 = 0x1000 → `10 10 00` in raw frame → `10 00` after DLE unstuffing
= 1 byte shorter than 04 00/08 00. Anchor search requirement explained.
Changelog — 5 new entries covering the 4-frame sequence, duplicate-page
detection, record_time anchor correction, sample_rate confirmation, and
_pending_frames / reset_parser=False implementation notes.
Quick Reference — Record Time and Sample Rate rows updated with correct
locations, types, and confirmed values.
Open Questions — SUB 1A item updated to "substantially resolved".
Record time item updated. Sample rate added as resolved.
Confirmed 2026-04-01 against Blastware event report for BE11529 thump
event ("00:28:12 April 1, 2026", PVS 3.906 in/s).
models.py:
- Timestamp.from_waveform_record(): decode 9-byte format from 0C record
bytes[0-8]: [day][sub_code][month][year:2BE][?][hour][min][sec]
- Timestamp: add hour/minute/second optional fields; __str__ includes
time when available
- PeakValues: add peak_vector_sum field (confirmed fixed offset 87)
client.py:
- _decode_waveform_record_into: add timestamp decode from bytes[0:9]
- _extract_record_type: decode byte[1] (sub_code), not ASCII string
search; 0x10 → "Waveform", histogram TBD
- _extract_peak_floats: add PVS from offset 87 (IEEE 754 BE float32)
= √(T²+V²+L²) at max instantaneous vector moment
sfm/server.py:
- _serialise_timestamp: add hour/minute/second/day fields to JSON
- _serialise_peak_values: add peak_vector_sum to JSON
docs: update §7.7.5 and §8 with confirmed 9-byte timestamp layout,
PVS field, and byte[1] record type encoding; update command table;
close resolved open questions.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
seismo_lab.py:
- Add ConsolePanel — third tab for direct device connections over serial
or TCP without the bridge subprocess
- Commands: POLL, Serial #, Full Config, Event Index (open/close per cmd)
- Colour-coded output: TX blue, RX raw teal, parsed green, errors red
- Save Log and Send to Analyzer buttons; auto-saves to bridges/captures/
- Queue/after(100) pattern — no performance impact
- Add SCRIPT_DIR to sys.path so minimateplus imports work from GUI
docs/instantel_protocol_reference.md:
- Confirm calibration year field at SUB FE payload offset 0x56–0x57
(uint16 BE): 0x07E7=2023 (BE18189), 0x07E9=2025 (BE11529)
- Document full Sierra Wireless RV50/RV55 required ACEmanager settings
(Quiet Mode, Data Forwarding Timeout, TCP Connect Response Delay, etc.)
- Correct §14.2: RV50/RV55 sends RING/CONNECT over TCP to caller even
with Quiet Mode on; parser handles by scanning for DLE+STX
- Confirm "Operating System" boot string capture via cold-start Console
- Resolve open question: 0x07E7 field = calibration year
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- minimateplus/transport.py: add TcpTransport — stdlib socket-based transport
with same interface as SerialTransport. Overrides read_until_idle() with
idle_gap=1.5s to absorb the modem's 1-second serial data forwarding buffer.
- minimateplus/client.py: make `port` param optional (default "") so
MiniMateClient works cleanly when a pre-built transport is injected.
- minimateplus/__init__.py: export SerialTransport and TcpTransport.
- sfm/server.py: add `host` / `tcp_port` query params to all device endpoints.
New _build_client() helper selects TCP or serial transport automatically.
OSError (connection refused, timeout) now returns HTTP 502.
- docs/instantel_protocol_reference.md: add changelog entry and full §14
(TCP/Modem Transport) documenting confirmed transparent passthrough, no ENQ
on connect, modem forwarding delay, call-up vs ACH modes, and hardware note
deprecating Raven X in favour of RV55/RX55.
Usage: GET /device/info?host=<modem_ip>&tcp_port=12345
Claude
serversdown
claude